nb/intel/gm45: Add remaining raminit code to support DDR2
Add the remaining DDR2 code to program the registers for memory timings, ODT, RCOMP, and refresh mode; and perform receive-enable calibration. TEST: DDR2 systems boot - Tested on a Dell Latitude E6400 - Tested on a Compal JHL90 TEST: Ensure DDR3 systems still boot - Tested on a Thinkpad X200 Change-Id: I6d9a1853fea9e29171d7c2f9ffe7086685c9efad Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34834 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Nico Huber
Felix Held
parent
d131183200
commit
87b5fa7c9d
|
|
@ -76,6 +76,15 @@ typedef enum { /* as in DDR3 spd */
|
|||
CHIP_CAP_16G = 6,
|
||||
} chip_capacity_t;
|
||||
|
||||
typedef enum { /* as in DDR2 spd */
|
||||
REFRESH_15_625 = 0,
|
||||
REFRESH_3_9 = 1,
|
||||
REFRESH_7_8 = 2,
|
||||
REFRESH_31_25 = 3,
|
||||
REFRESH_62_5 = 4,
|
||||
REFRESH_125 = 5,
|
||||
} refresh_rate_t;
|
||||
|
||||
typedef struct {
|
||||
unsigned int CAS;
|
||||
fsb_clock_t fsb_clock;
|
||||
|
|
@ -97,6 +106,7 @@ typedef struct {
|
|||
0xa - 0xf: raw card type A - F */
|
||||
chip_width_t chip_width;
|
||||
chip_capacity_t chip_capacity;
|
||||
refresh_rate_t refresh;
|
||||
unsigned int page_size; /* of whole DIMM in Bytes (4096 or 8192) */
|
||||
unsigned int banks;
|
||||
unsigned int ranks;
|
||||
|
|
@ -411,7 +421,7 @@ u32 raminit_get_rank_addr(unsigned int channel, unsigned int rank);
|
|||
|
||||
void raminit_rcomp_calibration(stepping_t stepping);
|
||||
void raminit_reset_readwrite_pointers(void);
|
||||
void raminit_receive_enable_calibration(const timings_t *, const dimminfo_t *);
|
||||
void raminit_receive_enable_calibration(int ddr_type, const timings_t *, const dimminfo_t *);
|
||||
void raminit_write_training(const mem_clock_t, const dimminfo_t *, int s3resume);
|
||||
void raminit_read_training(const dimminfo_t *, int s3resume);
|
||||
|
||||
|
|
|
|||
|
|
@ -349,6 +349,7 @@ typedef struct {
|
|||
unsigned int tWR;
|
||||
unsigned int page_size;
|
||||
unsigned int raw_card;
|
||||
unsigned int refresh;
|
||||
} channel[2];
|
||||
} spdinfo_t;
|
||||
/**
|
||||
|
|
@ -434,6 +435,7 @@ static void collect_ddr2_dimm(struct spd_dimminfo *const di, const int smb_addr)
|
|||
di->tWR = smbus_read_byte(smb_addr, 36) << 6; /* given in 1/4ns */
|
||||
|
||||
di->raw_card = 0; /* Use same path as for DDR3 type A. */
|
||||
di->refresh = smbus_read_byte(smb_addr, 12);
|
||||
}
|
||||
/*
|
||||
* This function collects RAM characteristics from SPD, assuming that RAM
|
||||
|
|
@ -490,6 +492,7 @@ static void collect_ddr3(sysinfo_t *const sysinfo, spdinfo_t *const config)
|
|||
config->channel[cur].tWR = smbus_read_byte(smb_addr, 17) * 32;
|
||||
|
||||
config->channel[cur].raw_card = smbus_read_byte(smb_addr, 62) & 0x1f;
|
||||
config->channel[cur].refresh = REFRESH_7_8;
|
||||
}
|
||||
cur++;
|
||||
mask >>= 2;
|
||||
|
|
@ -785,6 +788,7 @@ static void collect_dimm_config(sysinfo_t *const sysinfo)
|
|||
FOR_EACH_CHANNEL(i) {
|
||||
sysinfo->dimms[i].card_type =
|
||||
(spdinfo.dimm_mask & (1 << (i * 2))) ? spdinfo.channel[i].raw_card + 0xa : 0;
|
||||
sysinfo->dimms[i].refresh = spdinfo.channel[i].refresh;
|
||||
}
|
||||
|
||||
/* Find common memory clock and CAS. */
|
||||
|
|
@ -817,9 +821,6 @@ static void collect_dimm_config(sysinfo_t *const sysinfo)
|
|||
sysinfo->selected_timings.channel_mode = CHANNEL_MODE_DUAL_INTERLEAVED;
|
||||
else
|
||||
sysinfo->selected_timings.channel_mode = CHANNEL_MODE_SINGLE;
|
||||
|
||||
if (sysinfo->spd_type == DDR2)
|
||||
die("DDR2 support not complete yet\n");
|
||||
}
|
||||
|
||||
static void reset_on_bad_warmboot(void)
|
||||
|
|
@ -983,10 +984,10 @@ static void configure_dram_control_mode(const timings_t *const timings, const di
|
|||
cxdrc &= ~CxDRC0_RANKEN_MASK;
|
||||
FOR_EACH_POPULATED_RANK_IN_CHANNEL(dimms, ch, r)
|
||||
cxdrc |= CxDRC0_RANKEN(r);
|
||||
cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) |
|
||||
/* Always 7.8us for DDR3: */
|
||||
/* FIXME DDR2: SPD+12? */
|
||||
CxDRC0_RMS_78US;
|
||||
if (dimms[ch].refresh == REFRESH_3_9)
|
||||
cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) | CxDRC0_RMS_39US;
|
||||
else
|
||||
cxdrc = (cxdrc & ~CxDRC0_RMS_MASK) | CxDRC0_RMS_78US;
|
||||
mchbar_write32(mchbar, cxdrc);
|
||||
|
||||
mchbar = CxDRC1_MCHBAR(ch);
|
||||
|
|
@ -1009,30 +1010,41 @@ static void configure_dram_control_mode(const timings_t *const timings, const di
|
|||
}
|
||||
}
|
||||
|
||||
static void rcomp_initialization(const stepping_t stepping, const int sff)
|
||||
static void rcomp_initialization(const int spd_type, const stepping_t stepping, const int sff)
|
||||
{
|
||||
/* Program RCOMP codes. */
|
||||
if (sff)
|
||||
die("SFF platform unsupported in RCOMP initialization.\n");
|
||||
/* Values are for DDR3. */
|
||||
mchbar_clrbits8(0x6ac, 0x0f);
|
||||
mchbar_write8(0x6b0, 0x55);
|
||||
mchbar_clrbits8(0x6ec, 0x0f);
|
||||
mchbar_write8(0x6f0, 0x66);
|
||||
mchbar_clrbits8(0x72c, 0x0f);
|
||||
mchbar_write8(0x730, 0x66);
|
||||
mchbar_clrbits8(0x76c, 0x0f);
|
||||
mchbar_write8(0x770, 0x66);
|
||||
mchbar_clrbits8(0x7ac, 0x0f);
|
||||
mchbar_write8(0x7b0, 0x66);
|
||||
mchbar_clrbits8(0x7ec, 0x0f);
|
||||
mchbar_write8(0x7f0, 0x66);
|
||||
mchbar_clrbits8(0x86c, 0x0f);
|
||||
mchbar_write8(0x870, 0x55);
|
||||
mchbar_clrbits8(0x8ac, 0x0f);
|
||||
mchbar_write8(0x8b0, 0x66);
|
||||
/* ODT multiplier bits. */
|
||||
mchbar_clrsetbits32(0x04d0, 7 << 3 | 7 << 0, 2 << 3 | 2 << 0);
|
||||
|
||||
if (spd_type == DDR2) {
|
||||
unsigned int o;
|
||||
for (o = 0; o <= 0x200; o += 0x40) {
|
||||
mchbar_clrsetbits8(0x6ac + o, 0x0f, 0x0a);
|
||||
mchbar_write8(0x6b0 + o, 0x55);
|
||||
}
|
||||
/* ODT multiplier bits. */
|
||||
mchbar_clrsetbits32(0x04d0, 7 << 3 | 7 << 0, 1 << 3 | 1 << 0);
|
||||
} else {
|
||||
/* Values are for DDR3. */
|
||||
mchbar_clrbits8(0x6ac, 0x0f);
|
||||
mchbar_write8(0x6b0, 0x55);
|
||||
mchbar_clrbits8(0x6ec, 0x0f);
|
||||
mchbar_write8(0x6f0, 0x66);
|
||||
mchbar_clrbits8(0x72c, 0x0f);
|
||||
mchbar_write8(0x730, 0x66);
|
||||
mchbar_clrbits8(0x76c, 0x0f);
|
||||
mchbar_write8(0x770, 0x66);
|
||||
mchbar_clrbits8(0x7ac, 0x0f);
|
||||
mchbar_write8(0x7b0, 0x66);
|
||||
mchbar_clrbits8(0x7ec, 0x0f);
|
||||
mchbar_write8(0x7f0, 0x66);
|
||||
mchbar_clrbits8(0x86c, 0x0f);
|
||||
mchbar_write8(0x870, 0x55);
|
||||
mchbar_clrbits8(0x8ac, 0x0f);
|
||||
mchbar_write8(0x8b0, 0x66);
|
||||
/* ODT multiplier bits. */
|
||||
mchbar_clrsetbits32(0x04d0, 7 << 3 | 7 << 0, 2 << 3 | 2 << 0);
|
||||
}
|
||||
|
||||
/* Perform RCOMP calibration for DDR3. */
|
||||
raminit_rcomp_calibration(stepping);
|
||||
|
|
@ -1057,44 +1069,64 @@ static void rcomp_initialization(const stepping_t stepping, const int sff)
|
|||
mchbar_setbits32(0x400, 1 << 1);
|
||||
}
|
||||
|
||||
static void dram_powerup(const int resume)
|
||||
static void dram_powerup(const int spd_type, const int stepping, const int resume)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
udelay(200);
|
||||
mchbar_clrsetbits32(CLKCFG_MCHBAR, 1 << 3, 3 << 21);
|
||||
if (!resume) {
|
||||
tmp = mchbar_read32(CLKCFG_MCHBAR);
|
||||
tmp &= ~(3 << 21 | 1 << 3);
|
||||
if (spd_type == DDR2 && stepping < STEPPING_B0)
|
||||
tmp |= 2 << 21 | 1 << 3;
|
||||
else
|
||||
tmp |= 3 << 21;
|
||||
mchbar_write32(CLKCFG_MCHBAR, tmp);
|
||||
|
||||
if (spd_type == DDR3 && !resume) {
|
||||
mchbar_setbits32(0x1434, 1 << 10);
|
||||
udelay(1);
|
||||
}
|
||||
mchbar_setbits32(0x1434, 1 << 6);
|
||||
if (!resume) {
|
||||
if (spd_type == DDR3 && !resume) {
|
||||
udelay(1);
|
||||
mchbar_setbits32(0x1434, 1 << 9);
|
||||
mchbar_clrbits32(0x1434, 1 << 10);
|
||||
udelay(500);
|
||||
}
|
||||
}
|
||||
static void dram_program_timings(const timings_t *const timings)
|
||||
|
||||
static void dram_program_timings(const int spd_type, const timings_t *const timings)
|
||||
{
|
||||
/* Values are for DDR3. */
|
||||
const int burst_length = 8;
|
||||
const int tWTR = 4, tRTP = 1;
|
||||
const int tWTR = (spd_type == DDR2) ? 3 : 4, tRTP = 1;
|
||||
int i;
|
||||
|
||||
FOR_EACH_CHANNEL(i) {
|
||||
u32 reg = mchbar_read32(CxDRT0_MCHBAR(i));
|
||||
const int btb_wtp = timings->tWL + burst_length/2 + timings->tWR;
|
||||
const int btb_wtr = timings->tWL + burst_length/2 + tWTR;
|
||||
const int btb_wtr =
|
||||
((spd_type == DDR2) ? timings->CAS - 1 : timings->tWL)
|
||||
+ burst_length/2 + tWTR;
|
||||
reg = (reg & ~(CxDRT0_BtB_WtP_MASK | CxDRT0_BtB_WtR_MASK)) |
|
||||
((btb_wtp << CxDRT0_BtB_WtP_SHIFT) & CxDRT0_BtB_WtP_MASK) |
|
||||
((btb_wtr << CxDRT0_BtB_WtR_SHIFT) & CxDRT0_BtB_WtR_MASK);
|
||||
if (timings->mem_clock != MEM_CLOCK_1067MT) {
|
||||
if (spd_type == DDR2) {
|
||||
reg = (reg & ~(0x7 << 15)) | (2 << 15);
|
||||
if (timings->mem_clock == MEM_CLOCK_667MT)
|
||||
reg = (reg & ~(0xf << 10)) | (2 << 10);
|
||||
else
|
||||
reg = (reg & ~(0xf << 10)) | (3 << 10);
|
||||
reg = (reg & ~(0x7 << 5)) | (3 << 5);
|
||||
} else if (timings->mem_clock != MEM_CLOCK_1067MT) {
|
||||
reg = (reg & ~(0x7 << 15)) | ((9 - timings->CAS) << 15);
|
||||
reg = (reg & ~(0xf << 10)) | ((timings->CAS - 3) << 10);
|
||||
reg = (reg & ~(0x7 << 5)) | (3 << 5);
|
||||
} else {
|
||||
reg = (reg & ~(0x7 << 15)) | ((10 - timings->CAS) << 15);
|
||||
reg = (reg & ~(0xf << 10)) | ((timings->CAS - 4) << 10);
|
||||
reg = (reg & ~(0x7 << 5)) | (3 << 5);
|
||||
}
|
||||
reg = (reg & ~(0x7 << 5)) | (3 << 5);
|
||||
reg = (reg & ~(0x7 << 0)) | (1 << 0);
|
||||
mchbar_write32(CxDRT0_MCHBAR(i), reg);
|
||||
|
||||
|
|
@ -1108,7 +1140,10 @@ static void dram_program_timings(const timings_t *const timings)
|
|||
|
||||
reg = mchbar_read32(CxDRT2_MCHBAR(i));
|
||||
reg = (reg & ~(0x1f << 17)) | ((timings->tFAW & 0x1f) << 17);
|
||||
if (timings->mem_clock != MEM_CLOCK_1067MT) {
|
||||
if (spd_type == DDR2) {
|
||||
reg = (reg & ~(0x7 << 12)) | (0x1 << 12);
|
||||
reg = (reg & ~(0xf << 6)) | (0x1 << 6);
|
||||
} else if (timings->mem_clock != MEM_CLOCK_1067MT) {
|
||||
reg = (reg & ~(0x7 << 12)) | (0x2 << 12);
|
||||
reg = (reg & ~(0xf << 6)) | (0x9 << 6);
|
||||
} else {
|
||||
|
|
@ -1119,7 +1154,10 @@ static void dram_program_timings(const timings_t *const timings)
|
|||
mchbar_write32(CxDRT2_MCHBAR(i), reg);
|
||||
|
||||
reg = mchbar_read32(CxDRT3_MCHBAR(i));
|
||||
reg |= 0x3 << 28;
|
||||
if (spd_type == DDR2)
|
||||
reg &= ~(0x3 << 28);
|
||||
else
|
||||
reg |= (0x3 << 28);
|
||||
reg = (reg & ~(0x03 << 26));
|
||||
reg = (reg & ~(0x07 << 23)) | (((timings->CAS - 3) & 0x07) << 23);
|
||||
reg = (reg & ~(0xff << 13)) | ((timings->tRFC & 0xff) << 13);
|
||||
|
|
@ -1146,16 +1184,26 @@ static void dram_program_timings(const timings_t *const timings)
|
|||
if (timings->mem_clock == MEM_CLOCK_1067MT)
|
||||
reg = (reg & ~(0xf << 28)) | (0x8 << 28);
|
||||
reg = (reg & ~(0x00f << 22)) | ((burst_length/2 + timings->CAS + 2) << 22);
|
||||
reg = (reg & ~(0x3ff << 12)) | (0x190 << 12);
|
||||
if (spd_type == DDR2) {
|
||||
if (timings->mem_clock == MEM_CLOCK_667MT)
|
||||
reg = (reg & ~(0x1ff << 12)) | (0x21 << 12);
|
||||
else
|
||||
reg = (reg & ~(0x1ff << 12)) | (0x28 << 12);
|
||||
} else {
|
||||
reg = (reg & ~(0x1ff << 12)) | (0x190 << 12);
|
||||
}
|
||||
reg = (reg & ~(0x00f << 4)) | ((timings->CAS - 2) << 4);
|
||||
reg = (reg & ~(0x003 << 2)) | (0x001 << 2);
|
||||
reg = (reg & ~(0x003 << 0));
|
||||
mchbar_write32(CxDRT5_MCHBAR(i), reg);
|
||||
|
||||
reg = mchbar_read32(CxDRT6_MCHBAR(i));
|
||||
/* FIXME DDR2: SPD+12? */
|
||||
reg = (reg & ~(0xffff << 16)) | (0x066a << 16); /* always 7.8us refresh rate for DDR3 */
|
||||
reg |= (1 << 2);
|
||||
if (spd_type == DDR2) {
|
||||
reg &= ~(1 << 2);
|
||||
} else {
|
||||
reg = (reg & ~(0xffff << 16)) | (0x066a << 16); /* always 7.8us refresh rate for DDR3 */
|
||||
reg |= (1 << 2);
|
||||
}
|
||||
mchbar_write32(CxDRT6_MCHBAR(i), reg);
|
||||
}
|
||||
}
|
||||
|
|
@ -1180,9 +1228,8 @@ static void dram_program_banks(const dimminfo_t *const dimms)
|
|||
}
|
||||
}
|
||||
|
||||
static void odt_setup(const timings_t *const timings, const int sff)
|
||||
static void ddr3_odt_setup(const timings_t *const timings, const int sff)
|
||||
{
|
||||
/* Values are for DDR3. */
|
||||
int ch;
|
||||
|
||||
FOR_EACH_CHANNEL(ch) {
|
||||
|
|
@ -1224,6 +1271,45 @@ static void odt_setup(const timings_t *const timings, const int sff)
|
|||
}
|
||||
}
|
||||
|
||||
static void ddr2_odt_setup(const timings_t *const timings, const int sff)
|
||||
{
|
||||
int ch;
|
||||
|
||||
FOR_EACH_CHANNEL(ch) {
|
||||
u32 reg = mchbar_read32(CxODT_HIGH(ch));
|
||||
if (sff && (timings->mem_clock == MEM_CLOCK_667MT))
|
||||
reg &= ~(0x3 << (61 - 32));
|
||||
else
|
||||
reg |= 0x3 << (61 - 32);
|
||||
reg = (reg & ~(0x3 << (52 - 32))) | (1 << (52 - 32));
|
||||
reg = (reg & ~(0x7 << (48 - 32))) | ((timings->CAS - 2) << (48 - 32));
|
||||
reg = (reg & ~(0xf << (44 - 32))) | (8 << (44 - 32));
|
||||
reg = (reg & ~(0xf << (40 - 32))) | (7 << (40 - 32));
|
||||
if (timings->mem_clock == MEM_CLOCK_667MT) {
|
||||
reg = (reg & ~(0xf << (36 - 32))) | (4 << (36 - 32));
|
||||
reg = (reg & ~(0xf << (32 - 32))) | (4 << (32 - 32));
|
||||
} else {
|
||||
reg = (reg & ~(0xf << (36 - 32))) | (5 << (36 - 32));
|
||||
reg = (reg & ~(0xf << (32 - 32))) | (5 << (32 - 32));
|
||||
}
|
||||
mchbar_write32(CxODT_HIGH(ch), reg);
|
||||
|
||||
reg = mchbar_read32(CxODT_LOW(ch));
|
||||
if (timings->mem_clock == MEM_CLOCK_667MT)
|
||||
reg = (reg & ~(0x7 << 28)) | (2 << 28);
|
||||
else
|
||||
reg = (reg & ~(0x7 << 28)) | (3 << 28);
|
||||
reg = (reg & ~(0x3 << 22)) | (1 << 22);
|
||||
if (timings->mem_clock == MEM_CLOCK_667MT)
|
||||
reg = (reg & ~(0x7 << 12)) | ((timings->tWL - 1) << 12);
|
||||
else
|
||||
reg = (reg & ~(0x7 << 12)) | ((timings->tWL - 2) << 12);
|
||||
reg = (reg & ~(0x7 << 4)) | ((timings->tWL - 1) << 4);
|
||||
reg = (reg & ~(0x7 << 0));
|
||||
mchbar_write32(CxODT_LOW(ch), reg);
|
||||
}
|
||||
}
|
||||
|
||||
static void misc_settings(const timings_t *const timings,
|
||||
const stepping_t stepping)
|
||||
{
|
||||
|
|
@ -2055,12 +2141,12 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume)
|
|||
configure_dram_control_mode(timings, dimms);
|
||||
|
||||
/* Initialize RCOMP. */
|
||||
rcomp_initialization(sysinfo->stepping, sysinfo->sff);
|
||||
rcomp_initialization(sysinfo->spd_type, sysinfo->stepping, sysinfo->sff);
|
||||
|
||||
/* Power-up DRAM. */
|
||||
dram_powerup(s3resume);
|
||||
dram_powerup(sysinfo->spd_type, sysinfo->stepping, s3resume);
|
||||
/* Program DRAM timings. */
|
||||
dram_program_timings(timings);
|
||||
dram_program_timings(sysinfo->spd_type, timings);
|
||||
/* Program number of banks. */
|
||||
dram_program_banks(dimms);
|
||||
/* Enable DRAM clock pairs for populated DIMMs. */
|
||||
|
|
@ -2068,7 +2154,10 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume)
|
|||
mchbar_setbits32(CxDCLKDIS_MCHBAR(ch), CxDCLKDIS_ENABLE);
|
||||
|
||||
/* Enable On-Die Termination. */
|
||||
odt_setup(timings, sysinfo->sff);
|
||||
if (sysinfo->spd_type == DDR2)
|
||||
ddr2_odt_setup(timings, sysinfo->sff);
|
||||
else
|
||||
ddr3_odt_setup(timings, sysinfo->sff);
|
||||
/* Miscellaneous settings. */
|
||||
misc_settings(timings, sysinfo->stepping);
|
||||
/* Program clock crossing registers. */
|
||||
|
|
@ -2107,7 +2196,7 @@ void raminit(sysinfo_t *const sysinfo, const int s3resume)
|
|||
ddr3_calibrate_zq();
|
||||
|
||||
/* Perform receive-enable calibration. */
|
||||
raminit_receive_enable_calibration(timings, dimms);
|
||||
raminit_receive_enable_calibration(sysinfo->spd_type, timings, dimms);
|
||||
/* Lend clock values from receive-enable calibration. */
|
||||
mchbar_clrsetbits32(CxDRT5_MCHBAR(0), 0xf0,
|
||||
(((mchbar_read32(CxDRT3_MCHBAR(0)) >> 7) - 1) & 0xf) << 4);
|
||||
|
|
|
|||
|
|
@ -185,7 +185,8 @@ static void find_preamble(const int channel, const int group,
|
|||
}
|
||||
}
|
||||
|
||||
static void receive_enable_calibration(const timings_t *const timings,
|
||||
static void receive_enable_calibration(const int ddr_type,
|
||||
const timings_t *const timings,
|
||||
const dimminfo_t *const dimms)
|
||||
{
|
||||
/* Override group to byte-lane mapping for raw card type F DIMMS. */
|
||||
|
|
@ -200,7 +201,8 @@ static void receive_enable_calibration(const timings_t *const timings,
|
|||
};
|
||||
|
||||
const unsigned int t_bound =
|
||||
(timings->mem_clock == MEM_CLOCK_1067MT) ? 9 : 12;
|
||||
(timings->mem_clock == MEM_CLOCK_1067MT) ? 9
|
||||
: (ddr_type == DDR3) ? 12 : 15;
|
||||
const unsigned int p_bound =
|
||||
(timings->mem_clock == MEM_CLOCK_1067MT) ? 8 : 1;
|
||||
|
||||
|
|
@ -259,7 +261,8 @@ static void receive_enable_calibration(const timings_t *const timings,
|
|||
}
|
||||
}
|
||||
|
||||
void raminit_receive_enable_calibration(const timings_t *const timings,
|
||||
void raminit_receive_enable_calibration(const int ddr_type,
|
||||
const timings_t *const timings,
|
||||
const dimminfo_t *const dimms)
|
||||
{
|
||||
int ch;
|
||||
|
|
@ -284,7 +287,7 @@ void raminit_receive_enable_calibration(const timings_t *const timings,
|
|||
mchbar_clrsetbits32(0x14f0, 3 << 9, 1 << 9);
|
||||
mchbar_clrsetbits32(0x15f0, 3 << 9, 1 << 9);
|
||||
|
||||
receive_enable_calibration(timings, dimms);
|
||||
receive_enable_calibration(ddr_type, timings, dimms);
|
||||
|
||||
mchbar_clrbits32(0x12a4, 1 << 31);
|
||||
mchbar_clrbits32(0x13a4, 1 << 31);
|
||||
|
|
|
|||
Loading…
Reference in New Issue