Random minor cosmetical or coding style fixes (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2966 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann
parent
cc3ccdb643
commit
8b942e75d2
|
|
@ -104,7 +104,6 @@ default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
|
|||
##
|
||||
default HAVE_PIRQ_TABLE=1
|
||||
default IRQ_SLOT_COUNT=5
|
||||
#object irq_tables.o
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
|
|
|
|||
|
|
@ -38,7 +38,7 @@
|
|||
#define POST_CODE(x) outb(x, 0x80)
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||
|
||||
/* The alix1c has no SMBUS; the setup is hard-wired. */
|
||||
/* The ALIX1.C has no SMBus; the setup is hard-wired. */
|
||||
void cs5536_enable_smbus(void)
|
||||
{
|
||||
}
|
||||
|
|
@ -46,7 +46,8 @@ void cs5536_enable_smbus(void)
|
|||
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
|
||||
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
|
||||
|
||||
/* the part is a hynix hy5du121622ctp-d43
|
||||
/* The part is a Hynix hy5du121622ctp-d43.
|
||||
*
|
||||
* HY 5D U 12 16 2 2 C <blank> T <blank> P D43
|
||||
* Hynix
|
||||
* DDR SDRAM (5D)
|
||||
|
|
@ -62,18 +63,17 @@ void cs5536_enable_smbus(void)
|
|||
* Lead Free (P)
|
||||
* DDR400 3-3-3 (D43)
|
||||
*/
|
||||
/* spd array */
|
||||
static u8 spdbytes[] = {
|
||||
/* SPD array */
|
||||
static const u8 spdbytes[] = {
|
||||
[SPD_ACCEPTABLE_CAS_LATENCIES] = 0x10,
|
||||
[SPD_BANK_DENSITY] = 0x40,
|
||||
[SPD_DEVICE_ATTRIBUTES_GENERAL] = 0xff,
|
||||
[SPD_MEMORY_TYPE] = 7,
|
||||
[SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* This is a guess for tRAC value */
|
||||
[SPD_MODULE_ATTRIBUTES] = 0xff, /* fix me later when we figure out */
|
||||
[SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 10, /* A guess for the tRAC value */
|
||||
[SPD_MODULE_ATTRIBUTES] = 0xff, /* FIXME later when we figure out. */
|
||||
[SPD_NUM_BANKS_PER_SDRAM] = 4,
|
||||
[SPD_PRIMARY_SDRAM_WIDTH] = 8,
|
||||
/* alix1c is 1 bank. */
|
||||
[SPD_NUM_DIMM_BANKS] = 1,
|
||||
[SPD_NUM_DIMM_BANKS] = 1, /* ALIX1.C is 1 bank. */
|
||||
[SPD_NUM_COLUMNS] = 0xa,
|
||||
[SPD_NUM_ROWS] = 3,
|
||||
[SPD_REFRESH] = 0x3a,
|
||||
|
|
@ -91,7 +91,7 @@ static u8 spd_read_byte(u8 device, u8 address)
|
|||
print_debug("spd_read_byte dev ");
|
||||
print_debug_hex8(device);
|
||||
|
||||
if (device != (0x50<<1)){
|
||||
if (device != (0x50 << 1)) {
|
||||
print_debug(" returns 0xff\n");
|
||||
return 0xff;
|
||||
}
|
||||
|
|
@ -101,14 +101,17 @@ static u8 spd_read_byte(u8 device, u8 address)
|
|||
print_debug(" returns ");
|
||||
print_debug_hex8(spdbytes[address]);
|
||||
print_debug("\r\n");
|
||||
|
||||
return spdbytes[address];
|
||||
}
|
||||
|
||||
#define ManualConf 0 /* Do automatic strapped PLL config */
|
||||
#define PLLMSRhi 0x00001490 /* manual settings for the PLL */
|
||||
#define PLLMSRhi 0x00001490 /* Manual settings for the PLL */
|
||||
#define PLLMSRlo 0x02000030
|
||||
#define DIMM0 0xA0
|
||||
#define DIMM1 0xA2
|
||||
|
||||
#define DIMM0 0xa0
|
||||
#define DIMM1 0xa2
|
||||
|
||||
#include "northbridge/amd/lx/raminit.h"
|
||||
#include "northbridge/amd/lx/pll_reset.c"
|
||||
#include "northbridge/amd/lx/raminit.c"
|
||||
|
|
@ -119,6 +122,7 @@ static u8 spd_read_byte(u8 device, u8 address)
|
|||
static void msr_init(void)
|
||||
{
|
||||
msr_t msr;
|
||||
|
||||
/* Setup access to the MC for under 1MB. Note MC not setup yet. */
|
||||
msr.hi = 0x24fffc02;
|
||||
msr.lo = 0x10010000;
|
||||
|
|
@ -131,12 +135,11 @@ static void msr_init(void)
|
|||
msr.hi = 0x20000000;
|
||||
msr.lo = 0xfff00;
|
||||
wrmsr(MSR_GLIU1 + 0x20, msr);
|
||||
|
||||
}
|
||||
|
||||
/** Early mainboard specific GPIO setup. */
|
||||
static void mb_gpio_init(void)
|
||||
{
|
||||
/* Early mainboard specific GPIO setup */
|
||||
}
|
||||
|
||||
void cache_as_ram_main(void)
|
||||
|
|
@ -144,7 +147,9 @@ void cache_as_ram_main(void)
|
|||
static const struct mem_controller memctrl[] = {
|
||||
{.channel0 = {0x50}},
|
||||
};
|
||||
|
||||
extern void RestartCAR();
|
||||
|
||||
POST_CODE(0x01);
|
||||
|
||||
SystemPreInit();
|
||||
|
|
@ -152,9 +157,8 @@ void cache_as_ram_main(void)
|
|||
|
||||
cs5536_early_setup();
|
||||
|
||||
/* NOTE: must do this AFTER the early_setup!
|
||||
* it is counting on some early MSR setup
|
||||
* for cs5536
|
||||
/* NOTE: Must do this AFTER cs5536_early_setup()!
|
||||
* It is counting on some early MSR setup for the CS5536.
|
||||
*/
|
||||
cs5536_disable_internal_uart();
|
||||
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||
|
|
@ -169,10 +173,11 @@ void cache_as_ram_main(void)
|
|||
sdram_initialize(1, memctrl);
|
||||
|
||||
/* Check memory */
|
||||
/* enable this only if you are having questions */
|
||||
/* ram_check(0x00000000, 640 * 1024);*/
|
||||
/* Enable this only if you are having questions. */
|
||||
/* ram_check(0, 640 * 1024); */
|
||||
|
||||
/* Switch from Cache as RAM to real RAM
|
||||
/* Switch from Cache as RAM to real RAM.
|
||||
*
|
||||
* There are two ways we could think about this.
|
||||
*
|
||||
* 1. If we are using the auto.inc ROMCC way, the stack is
|
||||
|
|
@ -196,10 +201,10 @@ void cache_as_ram_main(void)
|
|||
print_err("POST 02\n");
|
||||
__asm__("wbinvd\n");
|
||||
print_err("Past wbinvd\n");
|
||||
/* we are finding the return does not work on this
|
||||
* board. Explicitly call the label that is after the call to
|
||||
* us. This is gross, but sometimes at this level it is the
|
||||
* only way out
|
||||
|
||||
/* We are finding the return does not work on this board. Explicitly
|
||||
* call the label that is after the call to us. This is gross, but
|
||||
* sometimes at this level it is the only way out.
|
||||
*/
|
||||
done_cache_as_ram_main();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -20,7 +20,6 @@
|
|||
#include <arch/pirq_routing.h>
|
||||
#include <console/console.h>
|
||||
#include <arch/io.h>
|
||||
#include <arch/pirq_routing.h>
|
||||
#include "../../../southbridge/amd/cs5536/cs5536.h"
|
||||
|
||||
/* Platform IRQs */
|
||||
|
|
@ -41,7 +40,11 @@
|
|||
#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */
|
||||
#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */
|
||||
|
||||
/* ALIX 1c interrupt wiring. Devices are:
|
||||
/*
|
||||
* ALIX1.C interrupt wiring.
|
||||
*
|
||||
* Devices are:
|
||||
*
|
||||
* 00:01.0 Host bridge: Advanced Micro Devices [AMD] CS5536 [Geode companion] Host Bridge (rev 31)
|
||||
* 00:01.2 Entertainment encryption device: Advanced Micro Devices [AMD] Geode LX AES Security Block
|
||||
* 00:0d.0 Ethernet controller: VIA Technologies, Inc. VT6105M [Rhine-III] (rev 96)
|
||||
|
|
@ -51,8 +54,11 @@
|
|||
* 00:0f.3 Multimedia audio controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] Audio (rev 01)
|
||||
* 00:0f.4 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] OHC (rev 02)
|
||||
* 00:0f.5 USB Controller: Advanced Micro Devices [AMD] CS5536 [Geode companion] EHC (rev 02)
|
||||
*
|
||||
* The only devices that interrupt are:
|
||||
* What device IRQ PIN PIN WIRED TO
|
||||
*
|
||||
* What Device IRQ PIN PIN WIRED TO
|
||||
* -------------------------------------------------
|
||||
* AES 00:01.2 0a 01 A A
|
||||
* 3VPCI 00:0c.0 0a 01 A A
|
||||
* eth0 00:0d.0 0b 01 A B
|
||||
|
|
@ -61,39 +67,40 @@
|
|||
* usb 00:0f.4 0b 04 D D
|
||||
* usb 00:0f.5 0b 04 D D
|
||||
*
|
||||
* The only swizzled interrupt is eth0, where INTA is wired to interrupt controller line B
|
||||
*/
|
||||
* The only swizzled interrupt is eth0, where INTA is wired to interrupt controller line B.
|
||||
*/
|
||||
|
||||
const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32 + 16 * IRQ_SLOT_COUNT,
|
||||
0x00, /* Where the interrupt router lies (bus) */
|
||||
(0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
|
||||
0x00, /* IRQs devoted exclusively to PCI usage */
|
||||
0x100B, /* Vendor */
|
||||
0x002B, /* Device */
|
||||
0, /* Crap (miniport) */
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
|
||||
0x00, /* u8 checksum , this has to set to
|
||||
* some value that would give 0
|
||||
* after the sum of all bytes
|
||||
* for this structure
|
||||
* (including checksum)
|
||||
*/
|
||||
{
|
||||
/* If you change the number of entries,
|
||||
* change the IRQ_SLOT_COUNT above!
|
||||
*/
|
||||
PIRQ_SIGNATURE,
|
||||
PIRQ_VERSION,
|
||||
32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
|
||||
0x00, /* Where the interrupt router lies (bus) */
|
||||
(0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */
|
||||
0x00, /* IRQs devoted exclusively to PCI usage */
|
||||
0x100B, /* Vendor */
|
||||
0x002B, /* Device */
|
||||
0, /* Crap (miniport) */
|
||||
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
|
||||
0x00, /* Checksum */
|
||||
{
|
||||
/* If you change the number of entries, change IRQ_SLOT_COUNT above! */
|
||||
|
||||
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
|
||||
{0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* cpu */
|
||||
/* PCI SLOT */
|
||||
{0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0}, /* slot1 */
|
||||
/* ONBOARD ETHER */
|
||||
{0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, /* ethernet */
|
||||
/* MINI PCI */
|
||||
{0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0}, /* mini slot2 */
|
||||
/* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D */
|
||||
{0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, /* chipset */
|
||||
|
||||
/* CPU */
|
||||
{0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0},
|
||||
|
||||
/* PCI (slot 1) */
|
||||
{0x00, (0x0C << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x4, 0x0},
|
||||
|
||||
/* On-board ethernet */
|
||||
{0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0},
|
||||
|
||||
/* Mini PCI (slot 2) */
|
||||
{0x00, (0x0E << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0},
|
||||
|
||||
/* Chipset slots -- f.3 wires to B, and f.4 and f.5 wires to D. */
|
||||
{0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0},
|
||||
}
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -21,14 +21,13 @@
|
|||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <device/pci_ops.h>
|
||||
#include <arch/io.h>
|
||||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/lxdef.h>
|
||||
#include "../../../southbridge/amd/cs5536/cs5536.h"
|
||||
#include "chip.h"
|
||||
|
||||
/* Print the platform configuration */
|
||||
/* Print the platform configuration. */
|
||||
void print_conf(void) {
|
||||
#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
|
||||
int i;
|
||||
|
|
@ -156,8 +155,8 @@ void print_conf(void) {
|
|||
|
||||
static void init(struct device *dev)
|
||||
{
|
||||
printk_debug("ALIX1C ENTER %s\n", __FUNCTION__);
|
||||
printk_debug("ALIX1C EXIT %s\n", __FUNCTION__);
|
||||
printk_debug("ALIX1.C ENTER %s\n", __FUNCTION__);
|
||||
printk_debug("ALIX1.C EXIT %s\n", __FUNCTION__);
|
||||
}
|
||||
|
||||
static void enable_dev(struct device *dev)
|
||||
|
|
|
|||
|
|
@ -4,22 +4,21 @@ mainboard pcengines/alix1c
|
|||
option CONFIG_COMPRESSED_PAYLOAD_NRV2B=0
|
||||
|
||||
## ROM_SIZE is the total number of bytes allocated for LinuxBIOS use
|
||||
## (normal AND fallback images and payloads).
|
||||
## leave 36k for vsa
|
||||
##
|
||||
option ROM_SIZE = 512*1024 - 36 * 1024
|
||||
## (normal AND fallback images and payloads). Leave 36k for VSA.
|
||||
option ROM_SIZE = (512 * 1024) - (36 * 1024)
|
||||
|
||||
## ROM_IMAGE_SIZE is the maximum number of bytes allowed for a LinuxBIOS image,
|
||||
## not including any payload.
|
||||
option ROM_IMAGE_SIZE=64*1024
|
||||
option ROM_IMAGE_SIZE = (64 * 1024)
|
||||
|
||||
option FALLBACK_SIZE = ROM_SIZE
|
||||
|
||||
option DEFAULT_CONSOLE_LOGLEVEL = 3
|
||||
option MAXIMUM_CONSOLE_LOGLEVEL = 11
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
|
||||
option USE_FALLBACK_IMAGE = 1
|
||||
option LINUXBIOS_EXTRA_VERSION = ".0Fallback"
|
||||
payload /tmp/filo.elf
|
||||
end
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue