GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/brya/var/vell: Change AMP driver setting 

1.Change I2S GPP_Sx (S0-S3) Native PAD Configuration from NF2 to NF4
2.Select CS35l53 AMP driver for Vell variant.

Change-Id: I96d49bd1a2ba061c4fd52b450b31d0885f49552c
Signed-off-by: Shon.Wang <shon.wang@quanta.corp-partner.google.com>
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Shon Wang 2021-12-24 10:45:15 +08:00 committed by Felix Held
parent 7cd505873b
commit 8d296b1eba
3 changed files with 44 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
src/mainboard/google/brya/Kconfig.name
View File

@ -156,10 +156,11 @@ config BOARD_GOOGLE_TANIKS
config BOARD_GOOGLE_VELL
bool "-> Vell"
select BOARD_GOOGLE_BASEBOARD_BRYA
select CHROMEOS_WIFI_SAR if CHROMEOS
select DRIVERS_GFX_GENERIC
select DRIVERS_INTEL_MIPI_CAMERA
select DRIVERS_I2C_CS35L53
select SOC_INTEL_COMMON_BLOCK_IPU
select CHROMEOS_WIFI_SAR if CHROMEOS
config BOARD_GOOGLE_VOLMAR
bool "-> Volmar"

8
src/mainboard/google/brya/variants/vell/gpio.c
View File

@ -72,13 +72,13 @@ static const struct pad_config override_gpio_table[] = {
PAD_NC(GPP_R7, NONE),
/* S0 : SNDW0_CLK ==> I2S_SPKR_SCLK_R */
PAD_CFG_NF(GPP_S0, NONE, DEEP, NF2),
PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4),
/* S1 : SNDW0_DATA ==> I2S_SPKR_SFRM_R */
PAD_CFG_NF(GPP_S1, NONE, DEEP, NF2),
PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4),
/* S2 : SNDW1_CLK ==> DMIC_CLK0_R */
PAD_CFG_NF(GPP_S2, NONE, DEEP, NF3),
PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4),
/* S3 : SNDW1_DATA ==> I2S_PCH_RX_SPKR_TX */
PAD_CFG_NF(GPP_S3, NONE, DEEP, NF3),
PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4),
/* S4 : SNDW2_CLK ==> NC */
PAD_NC(GPP_S4, NONE),
/* S5 : SNDW2_DATA ==> NC */

64
src/mainboard/google/brya/variants/vell/overridetree.cb
View File

@ -172,33 +172,45 @@ chip soc/intel/alderlake
end
end
device ref i2c0 on
chip drivers/i2c/generic
register "hid" = ""10EC5682""
register "name" = ""RT58""
register "desc" = ""Headset Codec""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
# Set the jd_src to RT5668_JD1 for jack detection
register "property_count" = "1"
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on
probe AUDIO MAX98360_ALC5682I_I2S
end
chip drivers/i2c/cs35l53
register "name" = ""SPK0""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
register "boost_type" = "EXTERNAL_BOOST"
register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
register "gpio1_output_enable" = "true"
register "gpio1_src_select" = "GPIO1_SRC_GPIO"
register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
device i2c 0x40 on end
end
chip drivers/i2c/generic
register "hid" = ""RTL5682""
register "name" = ""RT58""
register "desc" = ""Headset Codec""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
# Set the jd_src to RT5668_JD1 for jack detection
register "property_count" = "1"
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on
probe AUDIO MAX98360_ALC5682IVS_I2S
end
chip drivers/i2c/cs35l53
register "name" = ""SPK1""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
register "boost_type" = "EXTERNAL_BOOST"
register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
register "gpio1_output_enable" = "true"
register "gpio1_src_select" = "GPIO1_SRC_GPIO"
register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
device i2c 0x41 on end
end
chip drivers/i2c/cs35l53
register "name" = ""SPK2""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
register "boost_type" = "EXTERNAL_BOOST"
register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
register "gpio1_output_enable" = "true"
register "gpio1_src_select" = "GPIO1_SRC_GPIO"
register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
device i2c 0x42 on end
end
chip drivers/i2c/cs35l53
register "name" = ""SPK3""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_D14)"
register "boost_type" = "EXTERNAL_BOOST"
register "asp_sdout_hiz" = "ASP_SDOUT_LOGIC0_UNUSED_LOGIC0_DISABLED"
register "gpio1_output_enable" = "true"
register "gpio1_src_select" = "GPIO1_SRC_GPIO"
register "gpio2_src_select" = "GPIO2_SRC_HIGH_IMPEDANCE"
device i2c 0x43 on end
end
end #I2C0
device ref i2c1 on