mb/google/brya/var/nivviks: Initialise overridetree

Add an initial overridetree for nivviks based on the pre-proto schematic
and build matrix.

BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks

Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Id3ecd184415a20a3a52da8bb5e60fe2ce0495b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
This commit is contained in:
Reka Norman 2022-01-31 17:15:16 +11:00 committed by Felix Held
parent 7a91a10c61
commit 8d6ebe9d31
2 changed files with 325 additions and 3 deletions

View File

@ -80,6 +80,7 @@ config BOARD_GOOGLE_KANO
config BOARD_GOOGLE_NIVVIKS config BOARD_GOOGLE_NIVVIKS
bool "-> Nivviks" bool "-> Nivviks"
select BOARD_GOOGLE_BASEBOARD_NISSA select BOARD_GOOGLE_BASEBOARD_NISSA
select DRIVERS_INTEL_MIPI_CAMERA
config BOARD_GOOGLE_NEREID config BOARD_GOOGLE_NEREID
bool "-> Nereid" bool "-> Nereid"

View File

@ -1,4 +1,325 @@
chip soc/intel/alderlake fw_config
device domain 0 on field DB_USB 0 1
end option DB_NONE 0
option DB_1C_1A 1
option DB_1C_LTE 2
end
end
chip soc/intel/alderlake
register "SaGv" = "SaGv_Enabled"
register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
register "typec_aux_bias_pads[1]" = "{.pad_auxp_dc = GPP_A21, .pad_auxn_dc = GPP_A22}"
device domain 0 on
device ref ipu on
chip drivers/intel/mipi_camera
register "acpi_uid" = "0x50000"
register "acpi_name" = ""IPU0""
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
register "cio2_num_ports" = "1"
register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
register "cio2_prt[0]" = "1"
device generic 0 on end
end
end
device ref i2c1 on
chip drivers/i2c/hid
register "generic.hid" = ""ELAN6915""
register "generic.desc" = ""ELAN Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
register "generic.reset_delay_ms" = "20"
register "generic.reset_off_delay_ms" = "2"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
register "generic.stop_delay_ms" = "280"
register "generic.stop_off_delay_ms" = "2"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "generic.disable_gpio_export_in_crs" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 15 on end
end
end
device ref i2c2 on
chip drivers/i2c/sx9324
register "desc" = ""SAR Proximity Sensor""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
register "speed" = "I2C_SPEED_FAST"
register "uid" = "1"
register "reg_gnrl_ctrl0" = "0x16"
register "reg_gnrl_ctrl1" = "0x21"
register "reg_afe_ctrl0" = "0x00"
register "reg_afe_ctrl1" = "0x10"
register "reg_afe_ctrl2" = "0x00"
register "reg_afe_ctrl3" = "0x00"
register "reg_afe_ctrl4" = "0x07"
register "reg_afe_ctrl5" = "0x00"
register "reg_afe_ctrl6" = "0x00"
register "reg_afe_ctrl7" = "0x07"
register "reg_afe_ctrl8" = "0x12"
register "reg_afe_ctrl9" = "0x0f"
register "reg_prox_ctrl0" = "0x12"
register "reg_prox_ctrl1" = "0x12"
register "reg_prox_ctrl2" = "0x90"
register "reg_prox_ctrl3" = "0x60"
register "reg_prox_ctrl4" = "0x0c"
register "reg_prox_ctrl5" = "0x12"
register "reg_prox_ctrl6" = "0x3c"
register "reg_prox_ctrl7" = "0x58"
register "reg_adv_ctrl0" = "0x00"
register "reg_adv_ctrl1" = "0x00"
register "reg_adv_ctrl2" = "0x00"
register "reg_adv_ctrl3" = "0x00"
register "reg_adv_ctrl4" = "0x00"
register "reg_adv_ctrl5" = "0x05"
register "reg_adv_ctrl6" = "0x00"
register "reg_adv_ctrl7" = "0x00"
register "reg_adv_ctrl8" = "0x00"
register "reg_adv_ctrl9" = "0x00"
register "reg_adv_ctrl10" = "0x5c"
register "reg_adv_ctrl11" = "0x52"
register "reg_adv_ctrl12" = "0xb5"
register "reg_adv_ctrl13" = "0x00"
register "reg_adv_ctrl14" = "0x80"
register "reg_adv_ctrl15" = "0x0c"
register "reg_adv_ctrl16" = "0x38"
register "reg_adv_ctrl17" = "0x56"
register "reg_adv_ctrl18" = "0x33"
register "reg_adv_ctrl19" = "0xf0"
register "reg_adv_ctrl20" = "0xf0"
device i2c 28 on
probe DB_USB DB_1C_LTE
end
end
chip drivers/intel/mipi_camera
register "acpi_hid" = ""OVTI5675""
register "acpi_uid" = "0"
register "acpi_name" = ""CAM0""
register "chip_name" = ""Ov 5675 Camera""
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
register "ssdb.lanes_used" = "2"
register "ssdb.link_used" = "1"
register "ssdb.vcm_type" = "0x0C"
register "vcm_name" = ""VCM0""
register "num_freq_entries" = "1"
register "link_freq[0]" = "DEFAULT_LINK_FREQ"
register "remote_name" = ""IPU0""
register "has_power_resource" = "1"
#Controls
register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" # EN_PP2800_WCAM_X
register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" # EN_PP1800_PP1200_WCAM_X
register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" # WCAM_RST_L
#_ON
register "on_seq.ops_cnt" = "5"
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
#_OFF
register "off_seq.ops_cnt" = "4"
register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
device i2c 36 on end
end
chip drivers/intel/mipi_camera
register "acpi_uid" = "3"
register "acpi_name" = ""VCM0""
register "chip_name" = ""DW AF DAC""
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
register "vcm_compat" = ""dongwoon,dw9714""
device i2c 0C on end
end
chip drivers/intel/mipi_camera
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
register "acpi_uid" = "1"
register "acpi_name" = ""NVM0""
register "chip_name" = ""GT24C08""
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
register "nvm_size" = "0x2000"
register "nvm_pagesize" = "1"
register "nvm_readonly" = "1"
register "nvm_width" = "0x10"
register "nvm_compat" = ""atmel,24c08""
device i2c 50 on end
end
end
device ref i2c3 on
chip drivers/i2c/nau8825
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)"
register "jkdet_enable" = "1"
register "jkdet_pull_enable" = "0"
register "jkdet_polarity" = "1" # ActiveLow
register "vref_impedance" = "2" # 125kOhm
register "micbias_voltage" = "6" # 2.754
register "sar_threshold_num" = "4"
register "sar_threshold[0]" = "0x0c"
register "sar_threshold[1]" = "0x1c"
register "sar_threshold[2]" = "0x38"
register "sar_threshold[3]" = "0x60"
register "sar_hysteresis" = "1"
register "sar_voltage" = "0" # VDDA
register "sar_compare_time" = "0" # 500ns
register "sar_sampling_time" = "0" # 2us
register "short_key_debounce" = "2" # 100ms
register "jack_insert_debounce" = "7" # 512ms
register "jack_eject_debounce" = "7" # 512ms
device i2c 1a on end
end
end
device ref i2c5 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
register "wake" = "GPE0_DW2_14"
register "probed" = "1"
device i2c 15 on end
end
end
device ref hda on
chip drivers/generic/max98357a
register "hid" = ""MX98360A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
register "sdmode_delay" = "5"
device generic 0 on end
end
end
device ref pch_espi on
chip ec/google/chromeec
use conn0 as mux_conn[0]
use conn1 as mux_conn[1]
device pnp 0c09.0 on end
end
end
device ref pmc hidden
chip drivers/intel/pmc_mux
device generic 0 on
chip drivers/intel/pmc_mux/conn
use usb2_port1 as usb2_port
use tcss_usb3_port1 as usb3_port
device generic 0 alias conn0 on end
end
chip drivers/intel/pmc_mux/conn
use usb2_port2 as usb2_port
use tcss_usb3_port2 as usb3_port
device generic 1 alias conn1 on end
end
end
end
end
device ref tcss_xhci on
chip drivers/usb/acpi
device ref tcss_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device ref tcss_usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C1 (DB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(2, 1)"
device ref tcss_usb3_port2 on end
end
end
end
end
device ref xhci on
chip drivers/usb/acpi
device ref xhci_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device ref usb2_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C1 (DB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(2, 1)"
device ref usb2_port2 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(3, 1)"
device ref usb2_port3 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A1 (DB)""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(4, 1)"
device ref usb2_port4 on
probe DB_USB DB_1C_1A
end
end
chip drivers/usb/acpi
register "desc" = ""USB2 WWAN""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port4 on
probe DB_USB DB_1C_LTE
end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Camera""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port6 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Bluetooth""
register "type" = "UPC_TYPE_INTERNAL"
register "reset_gpio" =
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
device ref usb2_port8 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(3, 1)"
device ref usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A1 (DB)""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(4, 1)"
device ref usb3_port2 on
probe DB_USB DB_1C_1A
end
end
chip drivers/usb/acpi
register "desc" = ""USB3 WWAN""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb3_port2 on
probe DB_USB DB_1C_LTE
end
end
end
end
end
end
end end