ASRock DSDT: Split the ASRock DSDT

This is the same split as was done on the Persimmon.

Change-Id: I25bd63f23417b7926232f07eaaa7917170af9d60
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/3050
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Mike Loptien 2013-03-29 11:33:42 -06:00 committed by Ronald G. Minnich
parent b48605da20
commit 8d80a3fb9f
8 changed files with 531 additions and 1799 deletions

View File

@ -0,0 +1,84 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
Scope(\_GPE) { /* Start Scope GPE */
/* General event 3 */
Method(_L03) {
/* DBGO("\\_GPE\\_L00\n") */
Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
}
/* Legacy PM event */
Method(_L08) {
/* DBGO("\\_GPE\\_L08\n") */
}
/* Temp warning (TWarn) event */
Method(_L09) {
/* DBGO("\\_GPE\\_L09\n") */
/* Notify (\_TZ.TZ00, 0x80) */
}
/* USB controller PME# */
Method(_L0B) {
/* DBGO("\\_GPE\\_L0B\n") */
Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
}
/* ExtEvent0 SCI event */
Method(_L10) {
/* DBGO("\\_GPE\\_L10\n") */
}
/* ExtEvent1 SCI event */
Method(_L11) {
/* DBGO("\\_GPE\\_L11\n") */
}
/* GPIO0 or GEvent8 event */
Method(_L18) {
/* DBGO("\\_GPE\\_L18\n") */
Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
}
/* Azalia SCI event */
Method(_L1B) {
/* DBGO("\\_GPE\\_L1B\n") */
Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
}
} /* End Scope GPE */
/* Contains the GPEs for USB overcurrent */
#include "usb_oc.asl"

View File

@ -0,0 +1,67 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Data to be patched by the BIOS during POST */
/* FIXME the patching is not done yet! */
/* Memory related values */
Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
Name(PBLN, 0x0) /* Length of BIOS area */
Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
Name(HPBA, 0xFED00000) /* Base address of HPET table */
Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
/* Some global data */
Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
Name(OSV, Ones) /* Assume nothing */
Name(PMOD, One) /* Assume APIC */
Scope(\_SB) {
Method(CkOT, 0){
if(LNotEqual(OSTP, Ones)) {Return(OSTP)} /* OS version was already detected */
if(CondRefOf(\_OSI,Local1))
{
Store(1, OSTP) /* Assume some form of XP */
if (\_OSI("Windows 2006")) /* Vista */
{
Store(2, OSTP)
}
} else {
If(WCMP(\_OS,"Linux")) {
Store(3, OSTP) /* Linux */
} Else {
Store(4, OSTP) /* Gotta be WinCE */
}
}
Return(OSTP)
}
}
Scope(\_SI) {
Method(_SST, 1) {
/* DBGO("\\_SI\\_SST\n") */
/* DBGO(" New Indicator state: ") */
/* DBGO(Arg0) */
/* DBGO("\n") */
}
} /* End Scope SI */

View File

@ -0,0 +1,121 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Wake status package */
Name(WKST,Package(){Zero, Zero})
/*
* \_PTS - Prepare to Sleep method
*
* Entry:
* Arg0=The value of the sleeping state S1=1, S2=2, etc
*
* Exit:
* -none-
*
* The _PTS control method is executed at the beginning of the sleep process
* for S1-S5. The sleeping value is passed to the _PTS control method. This
* control method may be executed a relatively long time before entering the
* sleep state and the OS may abort the operation without notification to
* the ACPI driver. This method cannot modify the configuration or power
* state of any device in the system.
*/
Method(\_PTS, 1) {
/* DBGO("\\_PTS\n") */
/* DBGO("From S0 to S") */
/* DBGO(Arg0) */
/* DBGO("\n") */
/* Don't allow PCIRST# to reset USB */
if (LEqual(Arg0,3)){
Store(0,URRE)
}
/* Clear sleep SMI status flag and enable sleep SMI trap. */
/*Store(One, CSSM)
Store(One, SSEN)*/
/* On older chips, clear PciExpWakeDisEn */
/*if (LLessEqual(\_SB.SBRI, 0x13)) {
* Store(0,\_SB.PWDE)
*}
*/
/* Clear wake status structure. */
Store(0, Index(WKST,0))
Store(0, Index(WKST,1))
} /* End Method(\_PTS) */
/*
* \_BFS OEM Back From Sleep method
*
* Entry:
* Arg0=The value of the sleeping state S1=1, S2=2
*
* Exit:
* -none-
*/
Method(\_BFS, 1) {
/* DBGO("\\_BFS\n") */
/* DBGO("From S") */
/* DBGO(Arg0) */
/* DBGO(" to S0\n") */
}
/*
* \_WAK System Wake method
*
* Entry:
* Arg0=The value of the sleeping state S1=1, S2=2
*
* Exit:
* Return package of 2 DWords
* Dword 1 - Status
* 0x00000000 wake succeeded
* 0x00000001 Wake was signaled but failed due to lack of power
* 0x00000002 Wake was signaled but failed due to thermal condition
* Dword 2 - Power Supply state
* if non-zero the effective S-state the power supply entered
*/
Method(\_WAK, 1) {
/* DBGO("\\_WAK\n") */
/* DBGO("From S") */
/* DBGO(Arg0) */
/* DBGO(" to S0\n") */
/* Re-enable HPET */
Store(1,HPDE)
/* Restore PCIRST# so it resets USB */
if (LEqual(Arg0,3)){
Store(1,URRE)
}
/* Arbitrarily clear PciExpWakeStatus */
Store(PWST, PWST)
/* if(DeRefOf(Index(WKST,0))) {
* Store(0, Index(WKST,1))
* } else {
* Store(Arg0, Index(WKST,1))
* }
*/
Return(WKST)
} /* End Method(\_WAK) */

View File

@ -0,0 +1,114 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* SMBUS Support */
Mutex (SBX0, 0x00)
OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
Field (SMB0, ByteAcc, NoLock, Preserve) {
HSTS, 8, /* SMBUS status */
SSTS, 8, /* SMBUS slave status */
HCNT, 8, /* SMBUS control */
HCMD, 8, /* SMBUS host cmd */
HADD, 8, /* SMBUS address */
DAT0, 8, /* SMBUS data0 */
DAT1, 8, /* SMBUS data1 */
BLKD, 8, /* SMBUS block data */
SCNT, 8, /* SMBUS slave control */
SCMD, 8, /* SMBUS shaow cmd */
SEVT, 8, /* SMBUS slave event */
SDAT, 8 /* SMBUS slave data */
}
Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
Store (0x1E, HSTS)
Store (0xFA, Local0)
While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
Stall (0x64)
Decrement (Local0)
}
Return (Local0)
}
Method (SWTC, 1, NotSerialized) {
Store (Arg0, Local0)
Store (0x07, Local2)
Store (One, Local1)
While (LEqual (Local1, One)) {
Store (And (HSTS, 0x1E), Local3)
If (LNotEqual (Local3, Zero)) { /* read sucess */
If (LEqual (Local3, 0x02)) {
Store (Zero, Local2)
}
Store (Zero, Local1)
}
Else {
If (LLess (Local0, 0x0A)) { /* read failure */
Store (0x10, Local2)
Store (Zero, Local1)
}
Else {
Sleep (0x0A) /* 10 ms, try again */
Subtract (Local0, 0x0A, Local0)
}
}
}
Return (Local2)
}
Method (SMBR, 3, NotSerialized) {
Store (0x07, Local0)
If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
Store (WCLR (), Local0) /* clear SMBUS status register before read data */
If (LEqual (Local0, Zero)) {
Release (SBX0)
Return (0x0)
}
Store (0x1F, HSTS)
Store (Or (ShiftLeft (Arg1, One), One), HADD)
Store (Arg2, HCMD)
If (LEqual (Arg0, 0x07)) {
Store (0x48, HCNT) /* read byte */
}
Store (SWTC (0x03E8), Local1) /* 1000 ms */
If (LEqual (Local1, Zero)) {
If (LEqual (Arg0, 0x07)) {
Store (DAT0, Local0)
}
}
Else {
Store (Local1, Local0)
}
Release (SBX0)
}
/* DBGO("the value of SMBusData0 register ") */
/* DBGO(Arg2) */
/* DBGO(" is ") */
/* DBGO(Local0) */
/* DBGO("\n") */
Return (Local0)
}

View File

@ -0,0 +1,20 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* No SuperIO device or functionality yet */

View File

@ -0,0 +1,88 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* THERMAL */
Scope(\_TZ) {
Name (KELV, 2732)
Name (THOT, 800)
Name (TCRT, 850)
ThermalZone(TZ00) {
Method(_AC0,0) { /* Active Cooling 0 (0=highest fan speed) */
/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
Return(Add(0, 2730))
}
Method(_AL0,0) { /* Returns package of cooling device to turn on */
/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
Return(Package() {\_TZ.TZ00.FAN0})
}
Device (FAN0) {
Name(_HID, EISAID("PNP0C0B"))
Name(_PR0, Package() {PFN0})
}
PowerResource(PFN0,0,0) {
Method(_STA) {
Store(0xF,Local0)
Return(Local0)
}
Method(_ON) {
/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
}
Method(_OFF) {
/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
}
}
Method(_HOT,0) { /* return hot temp in tenths degree Kelvin */
/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
Return (Add (THOT, KELV))
}
Method(_CRT,0) { /* return critical temp in tenths degree Kelvin */
/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
Return (Add (TCRT, KELV))
}
Method(_TMP,0) { /* return current temp of this zone */
Store (SMBR (0x07, 0x4C,, 0x00), Local0)
If (LGreater (Local0, 0x10)) {
Store (Local0, Local1)
}
Else {
Add (Local0, THOT, Local0)
Return (Add (400, KELV))
}
Store (SMBR (0x07, 0x4C, 0x01), Local0)
/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
If (LGreater (Local0, 0x10)) {
If (LGreater (Local0, Local1)) {
Store (Local0, Local1)
}
Multiply (Local1, 10, Local1)
Return (Add (Local1, KELV))
}
Else {
Add (Local0, THOT, Local0)
Return (Add (400 , KELV))
}
} /* end of _TMP */
} /* end of TZ00 */
}

View File

@ -25,6 +25,19 @@ DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
#include "usb.asl" #include "usb.asl"
} }
*/ */
/* USB overcurrent mapping pins. */
Name(UOM0, 0)
Name(UOM1, 2)
Name(UOM2, 0)
Name(UOM3, 7)
Name(UOM4, 2)
Name(UOM5, 2)
Name(UOM6, 6)
Name(UOM7, 2)
Name(UOM8, 6)
Name(UOM9, 6)
Method(UCOC, 0) { Method(UCOC, 0) {
Sleep(20) Sleep(20)
Store(0x13,CMTI) Store(0x13,CMTI)

File diff suppressed because it is too large Load Diff