Following patch converts the run-time SSDT patching via update_ssdt funtion to
new AML code generator. Compile-tested on all changed targets. I think it should work because it works for Asus M2V-MX SE. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3929 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
742655bb4d
commit
8db0cfefd1
|
@ -15,6 +15,7 @@
|
|||
#include <device/pci_ids.h>
|
||||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
|
||||
|
||||
#define DUMP_ACPI_TABLES 0
|
||||
|
||||
|
@ -37,8 +38,6 @@ static void dump_mem(unsigned start, unsigned end)
|
|||
|
||||
#define HC_POSSIBLE_NUM 8
|
||||
extern unsigned char AmlCode[];
|
||||
extern unsigned char AmlCode_ssdt[];
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
extern unsigned char AmlCode_ssdt2[];
|
||||
extern unsigned char AmlCode_ssdt3[];
|
||||
|
@ -187,78 +186,11 @@ unsigned long acpi_fill_madt(unsigned long current)
|
|||
return current;
|
||||
}
|
||||
|
||||
//FIXME: next could be moved to northbridge/amd/amdk8/amdk8_acpi.c or cpu/amd/k8/k8_acpi.c begin
|
||||
static void int_to_stream(uint32_t val, uint8_t * dest)
|
||||
{
|
||||
int i;
|
||||
for (i = 0; i < 4; i++) {
|
||||
*(dest + i) = (val >> (8 * i)) & 0xff;
|
||||
}
|
||||
unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
|
||||
k8acpi_write_vars();
|
||||
return (unsigned long) (acpigen_get_current());
|
||||
}
|
||||
|
||||
extern void get_bus_conf(void);
|
||||
|
||||
static void update_ssdt(void *ssdt)
|
||||
{
|
||||
uint8_t *BUSN;
|
||||
uint8_t *MMIO;
|
||||
uint8_t *PCIO;
|
||||
uint8_t *SBLK;
|
||||
uint8_t *TOM1;
|
||||
uint8_t *HCLK;
|
||||
uint8_t *SBDN;
|
||||
uint8_t *HCDN;
|
||||
int i;
|
||||
device_t dev;
|
||||
uint32_t dword;
|
||||
msr_t msr;
|
||||
|
||||
BUSN = ssdt + 0x3a; //+5 will be next BUSN
|
||||
MMIO = ssdt + 0x57; //+5 will be next MMIO
|
||||
PCIO = ssdt + 0xaf; //+5 will be next PCIO
|
||||
SBLK = ssdt + 0xdc; // one byte
|
||||
TOM1 = ssdt + 0xe3; //
|
||||
HCLK = ssdt + 0xfa; //+5 will be next HCLK
|
||||
SBDN = ssdt + 0xed; //
|
||||
HCDN = ssdt + 0x12a; //+5 will be next HCDN
|
||||
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
dword = pci_read_config32(dev, 0xe0 + i * 4);
|
||||
int_to_stream(dword, BUSN + i * 5);
|
||||
}
|
||||
|
||||
for (i = 0; i < 0x10; i++) {
|
||||
dword = pci_read_config32(dev, 0x80 + i * 4);
|
||||
int_to_stream(dword, MMIO + i * 5);
|
||||
}
|
||||
|
||||
for (i = 0; i < 0x08; i++) {
|
||||
dword = pci_read_config32(dev, 0xc0 + i * 4);
|
||||
int_to_stream(dword, PCIO + i * 5);
|
||||
}
|
||||
|
||||
*SBLK = (uint8_t) (sblk);
|
||||
|
||||
msr = rdmsr(TOP_MEM);
|
||||
int_to_stream(msr.lo, TOM1);
|
||||
|
||||
for (i = 0; i < hc_possible_num; i++) {
|
||||
int_to_stream(pci1234[i], HCLK + i * 5);
|
||||
int_to_stream(hcdn[i], HCDN + i * 5);
|
||||
}
|
||||
for (i = hc_possible_num; i < HC_POSSIBLE_NUM; i++) { // in case we set array size to other than 8
|
||||
int_to_stream(0x00000000, HCLK + i * 5);
|
||||
int_to_stream(hcdn[i], HCDN + i * 5);
|
||||
}
|
||||
|
||||
int_to_stream(sbdn, SBDN);
|
||||
|
||||
}
|
||||
|
||||
//end
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
|
@ -322,16 +254,10 @@ unsigned long write_acpi_tables(unsigned long start)
|
|||
|
||||
/* SSDT */
|
||||
printk_debug("ACPI: * SSDT\n");
|
||||
ssdt = (acpi_header_t *) current;
|
||||
current += ((acpi_header_t *) AmlCode_ssdt)->length;
|
||||
memcpy((void *) ssdt, (void *) AmlCode_ssdt,
|
||||
((acpi_header_t *) AmlCode_ssdt)->length);
|
||||
//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
|
||||
update_ssdt((void *) ssdt);
|
||||
/* recalculate checksum */
|
||||
ssdt->checksum = 0;
|
||||
ssdt->checksum =
|
||||
acpi_checksum((unsigned char *) ssdt, ssdt->length);
|
||||
ssdt = (acpi_header_t *)current;
|
||||
|
||||
acpi_create_ssdt_generator(ssdt, "DYNADATA");
|
||||
current += ssdt->length;
|
||||
acpi_add_table(rsdt, ssdt);
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
|
|
|
@ -25,7 +25,7 @@
|
|||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <cpu/amd/amdk8_sysconf.h>
|
||||
|
||||
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
|
||||
#include <arch/cpu.h>
|
||||
|
||||
#define DUMP_ACPI_TABLES 0
|
||||
|
@ -99,8 +99,6 @@ unsigned long acpi_fill_madt(unsigned long current)
|
|||
|
||||
extern void get_bus_conf(void);
|
||||
|
||||
extern void update_ssdt(void *ssdt);
|
||||
|
||||
void update_ssdtx(void *ssdtx, int i)
|
||||
{
|
||||
uint8_t *PCI;
|
||||
|
@ -591,6 +589,11 @@ u32 pstates_algorithm(acpi_header_t * dsdt)
|
|||
|
||||
}
|
||||
|
||||
unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
|
||||
k8acpi_write_vars();
|
||||
return (unsigned long) (acpigen_get_current());
|
||||
}
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
|
@ -657,15 +660,10 @@ unsigned long write_acpi_tables(unsigned long start)
|
|||
|
||||
/* SSDT */
|
||||
printk_debug("ACPI: * SSDT\n");
|
||||
ssdt = (acpi_header_t *) current;
|
||||
current += ((acpi_header_t *) AmlCode_ssdt)->length;
|
||||
memcpy((void *)ssdt, (void *)AmlCode_ssdt,
|
||||
((acpi_header_t *) AmlCode_ssdt)->length);
|
||||
/* Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c */
|
||||
update_ssdt((void *)ssdt);
|
||||
/* recalculate checksum */
|
||||
ssdt->checksum = 0;
|
||||
ssdt->checksum = acpi_checksum((u8 *)ssdt, ssdt->length);
|
||||
ssdt = (acpi_header_t *)current;
|
||||
|
||||
acpi_create_ssdt_generator(ssdt, "DYNADATA");
|
||||
current += ssdt->length;
|
||||
acpi_add_table(rsdt, ssdt);
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
|
|
|
@ -25,7 +25,7 @@
|
|||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <cpu/amd/amdk8_sysconf.h>
|
||||
|
||||
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
|
||||
#include <arch/cpu.h>
|
||||
|
||||
#define DUMP_ACPI_TABLES 0
|
||||
|
@ -55,7 +55,6 @@ static void dump_mem(u32 start, u32 end)
|
|||
#endif
|
||||
|
||||
extern u8 AmlCode[];
|
||||
extern u8 AmlCode_ssdt[];
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
extern u8 AmlCode_ssdt2[];
|
||||
|
@ -99,8 +98,6 @@ unsigned long acpi_fill_madt(unsigned long current)
|
|||
|
||||
extern void get_bus_conf(void);
|
||||
|
||||
extern void update_ssdt(void *ssdt);
|
||||
|
||||
void update_ssdtx(void *ssdtx, int i)
|
||||
{
|
||||
uint8_t *PCI;
|
||||
|
@ -591,6 +588,11 @@ u32 pstates_algorithm(acpi_header_t * dsdt)
|
|||
|
||||
}
|
||||
|
||||
unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
|
||||
k8acpi_write_vars();
|
||||
return (unsigned long) (acpigen_get_current());
|
||||
}
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
|
@ -657,15 +659,10 @@ unsigned long write_acpi_tables(unsigned long start)
|
|||
|
||||
/* SSDT */
|
||||
printk_debug("ACPI: * SSDT\n");
|
||||
ssdt = (acpi_header_t *) current;
|
||||
current += ((acpi_header_t *) AmlCode_ssdt)->length;
|
||||
memcpy((void *)ssdt, (void *)AmlCode_ssdt,
|
||||
((acpi_header_t *) AmlCode_ssdt)->length);
|
||||
/* Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c */
|
||||
update_ssdt((void *)ssdt);
|
||||
/* recalculate checksum */
|
||||
ssdt->checksum = 0;
|
||||
ssdt->checksum = acpi_checksum((u8 *)ssdt, ssdt->length);
|
||||
ssdt = (acpi_header_t *)current;
|
||||
|
||||
acpi_create_ssdt_generator(ssdt, "DYNADATA");
|
||||
current += ssdt->length;
|
||||
acpi_add_table(rsdt, ssdt);
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
|
|
|
@ -16,6 +16,7 @@
|
|||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <cpu/amd/amdk8_sysconf.h>
|
||||
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
|
||||
|
||||
#include "mb_sysconf.h"
|
||||
|
||||
|
@ -38,8 +39,6 @@ static void dump_mem(unsigned start, unsigned end)
|
|||
#endif
|
||||
|
||||
extern unsigned char AmlCode[];
|
||||
extern unsigned char AmlCode_ssdt[];
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
extern unsigned char AmlCode_ssdt2[];
|
||||
extern unsigned char AmlCode_ssdt3[];
|
||||
|
@ -157,8 +156,6 @@ unsigned long acpi_fill_madt(unsigned long current)
|
|||
|
||||
extern void get_bus_conf(void);
|
||||
|
||||
extern void update_ssdt(void *ssdt);
|
||||
|
||||
void update_ssdtx(void *ssdtx, int i)
|
||||
{
|
||||
uint8_t *PCI;
|
||||
|
@ -182,6 +179,11 @@ void update_ssdtx(void *ssdtx, int i)
|
|||
|
||||
}
|
||||
|
||||
unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
|
||||
k8acpi_write_vars();
|
||||
return (unsigned long) (acpigen_get_current());
|
||||
}
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
|
@ -256,14 +258,10 @@ unsigned long write_acpi_tables(unsigned long start)
|
|||
/* SSDT */
|
||||
printk_debug("ACPI: * SSDT\n");
|
||||
ssdt = (acpi_header_t *)current;
|
||||
current += ((acpi_header_t *)AmlCode_ssdt)->length;
|
||||
memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length);
|
||||
//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
|
||||
update_ssdt((void*)ssdt);
|
||||
/* recalculate checksum */
|
||||
ssdt->checksum = 0;
|
||||
ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
|
||||
acpi_add_table(rsdt,ssdt);
|
||||
|
||||
acpi_create_ssdt_generator(ssdt, "DYNADATA");
|
||||
current += ssdt->length;
|
||||
acpi_add_table(rsdt, ssdt);
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
|
||||
|
|
|
@ -16,6 +16,7 @@
|
|||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <cpu/amd/amdk8_sysconf.h>
|
||||
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
|
||||
|
||||
#include "mb_sysconf.h"
|
||||
|
||||
|
@ -38,7 +39,6 @@ static void dump_mem(unsigned start, unsigned end)
|
|||
#endif
|
||||
|
||||
extern unsigned char AmlCode[];
|
||||
extern unsigned char AmlCode_ssdt[];
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
extern unsigned char AmlCode_ssdt2[];
|
||||
|
@ -159,8 +159,6 @@ unsigned long acpi_fill_madt(unsigned long current)
|
|||
|
||||
extern void get_bus_conf(void);
|
||||
|
||||
extern void update_ssdt(void *ssdt);
|
||||
|
||||
void update_ssdtx(void *ssdtx, int i)
|
||||
{
|
||||
uint8_t *PCI;
|
||||
|
@ -184,6 +182,11 @@ void update_ssdtx(void *ssdtx, int i)
|
|||
|
||||
}
|
||||
|
||||
unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
|
||||
k8acpi_write_vars();
|
||||
return (unsigned long) (acpigen_get_current());
|
||||
}
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
|
@ -258,14 +261,10 @@ unsigned long write_acpi_tables(unsigned long start)
|
|||
/* SSDT */
|
||||
printk_debug("ACPI: * SSDT\n");
|
||||
ssdt = (acpi_header_t *)current;
|
||||
current += ((acpi_header_t *)AmlCode_ssdt)->length;
|
||||
memcpy((void *)ssdt, (void *)AmlCode_ssdt, ((acpi_header_t *)AmlCode_ssdt)->length);
|
||||
//Here you need to set value in pci1234, sblk and sbdn in get_bus_conf.c
|
||||
update_ssdt((void*)ssdt);
|
||||
/* recalculate checksum */
|
||||
ssdt->checksum = 0;
|
||||
ssdt->checksum = acpi_checksum((unsigned char *)ssdt,ssdt->length);
|
||||
acpi_add_table(rsdt,ssdt);
|
||||
|
||||
acpi_create_ssdt_generator(ssdt, "DYNADATA");
|
||||
current += ssdt->length;
|
||||
acpi_add_table(rsdt, ssdt);
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
|
||||
|
|
|
@ -19,13 +19,6 @@ end
|
|||
|
||||
if HAVE_ACPI_TABLES
|
||||
object amdk8_acpi.o
|
||||
makerule ssdt.c
|
||||
depends "$(TOP)/src/northbridge/amd/amdk8/ssdt.dsl"
|
||||
action "iasl -p $(PWD)/ssdt -tc $(TOP)/src/northbridge/amd/amdk8/ssdt.dsl"
|
||||
action "perl -pi -e 's/AmlCode/AmlCode_ssdt/g' ssdt.hex"
|
||||
action "mv ssdt.hex ssdt.c"
|
||||
end
|
||||
object ./ssdt.o
|
||||
end
|
||||
|
||||
|
||||
|
|
|
@ -308,86 +308,3 @@ int k8acpi_write_vars(void)
|
|||
acpigen_patch_len(lens - 1);
|
||||
return lens;
|
||||
}
|
||||
|
||||
// moved from mb acpi_tables.c
|
||||
static void intx_to_stream(u32 val, u32 len, u8 *dest)
|
||||
{
|
||||
int i;
|
||||
for(i=0;i<len;i++) {
|
||||
*(dest+i) = (val >> (8*i)) & 0xff;
|
||||
}
|
||||
}
|
||||
|
||||
static void int_to_stream(u32 val, u8 *dest)
|
||||
{
|
||||
return intx_to_stream(val, 4, dest);
|
||||
}
|
||||
|
||||
// used by acpi_tables.h
|
||||
void update_ssdt(void *ssdt)
|
||||
{
|
||||
u8 *BUSN;
|
||||
u8 *MMIO;
|
||||
u8 *PCIO;
|
||||
u8 *SBLK;
|
||||
u8 *TOM1;
|
||||
u8 *SBDN;
|
||||
u8 *HCLK;
|
||||
u8 *HCDN;
|
||||
u8 *CBST;
|
||||
|
||||
int i;
|
||||
device_t dev;
|
||||
u32 dword;
|
||||
msr_t msr;
|
||||
|
||||
BUSN = ssdt+0x3a; //+5 will be next BUSN
|
||||
MMIO = ssdt+0x57; //+5 will be next MMIO
|
||||
PCIO = ssdt+0xaf; //+5 will be next PCIO
|
||||
SBLK = ssdt+0xdc; // one byte
|
||||
TOM1 = ssdt+0xe3; //
|
||||
SBDN = ssdt+0xed; //
|
||||
HCLK = ssdt+0xfa; //+5 will be next HCLK
|
||||
HCDN = ssdt+0x12a; //+5 will be next HCDN
|
||||
CBST = ssdt+0x157; //
|
||||
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
|
||||
for(i=0;i<4;i++) {
|
||||
dword = pci_read_config32(dev, 0xe0+i*4);
|
||||
int_to_stream(dword, BUSN+i*5);
|
||||
}
|
||||
for(i=0;i<0x10;i++) {
|
||||
dword = pci_read_config32(dev, 0x80+i*4);
|
||||
int_to_stream(dword, MMIO+i*5);
|
||||
}
|
||||
for(i=0;i<0x08;i++) {
|
||||
dword = pci_read_config32(dev, 0xc0+i*4);
|
||||
int_to_stream(dword, PCIO+i*5);
|
||||
}
|
||||
|
||||
*SBLK = (u8)(sysconf.sblk);
|
||||
|
||||
msr = rdmsr(TOP_MEM);
|
||||
int_to_stream(msr.lo, TOM1);
|
||||
|
||||
for(i=0;i<sysconf.hc_possible_num;i++) {
|
||||
int_to_stream(sysconf.pci1234[i], HCLK + i*5);
|
||||
int_to_stream(sysconf.hcdn[i], HCDN + i*5);
|
||||
}
|
||||
for(i=sysconf.hc_possible_num; i<HC_POSSIBLE_NUM; i++) { // in case we set array size to other than 8
|
||||
int_to_stream(0x00000000, HCLK + i*5);
|
||||
int_to_stream(0x20202020, HCDN + i*5);
|
||||
}
|
||||
|
||||
int_to_stream(sysconf.sbdn, SBDN);
|
||||
|
||||
if((sysconf.pci1234[0] >> 12) & 0xff) { //sb chain on other than bus 0
|
||||
*CBST = (u8) (0x0f);
|
||||
}
|
||||
else {
|
||||
*CBST = (u8) (0x00);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
//end
|
||||
|
|
|
@ -1,78 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-K8", "AMD-ACPI", 100925440)
|
||||
{
|
||||
/*
|
||||
* These objects were referenced but not defined in this table
|
||||
*/
|
||||
External (\_SB_.PCI0, DeviceObj)
|
||||
|
||||
Scope (\_SB.PCI0)
|
||||
{
|
||||
Name (BUSN, Package (0x04)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444
|
||||
})
|
||||
Name (MMIO, Package (0x10)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444,
|
||||
0x55555555,
|
||||
0x66666666,
|
||||
0x77777777,
|
||||
0x88888888,
|
||||
0x99999999,
|
||||
0xaaaaaaaa,
|
||||
0xbbbbbbbb,
|
||||
0xcccccccc,
|
||||
0xdddddddd,
|
||||
0xeeeeeeee,
|
||||
0x11111111,
|
||||
0x22222222
|
||||
})
|
||||
Name (PCIO, Package (0x08)
|
||||
{
|
||||
0x77777777,
|
||||
0x88888888,
|
||||
0x99999999,
|
||||
0xaaaaaaaa,
|
||||
0xbbbbbbbb,
|
||||
0xcccccccc,
|
||||
0xdddddddd,
|
||||
0xeeeeeeee
|
||||
})
|
||||
Name (SBLK, 0x11)
|
||||
Name (TOM1, 0xaaaaaaaa)
|
||||
Name (SBDN, 0xbbbbbbbb)
|
||||
Name (HCLK, Package (0x08)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444,
|
||||
0x55555555,
|
||||
0x66666666,
|
||||
0x77777777,
|
||||
0x88888888
|
||||
})
|
||||
Name (HCDN, Package (0x08)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444,
|
||||
0x55555555,
|
||||
0x66666666,
|
||||
0x77777777,
|
||||
0x88888888
|
||||
})
|
||||
Name (CBST, 0x88)
|
||||
}
|
||||
}
|
||||
|
Loading…
Reference in New Issue