soc/amd: move set_uart_config prototype to common UART header

Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97860292fd3cd0330fec40edb31089cd6608906b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>

src/soc/amd/cezanne/early_fch.c

@@ -7,6 +7,7 @@
 #include <amdblocks/lpc.h>
 #include <amdblocks/pmlib.h>
 #include <amdblocks/smbus.h>
+#include <amdblocks/uart.h>
 #include <soc/i2c.h>
 #include <soc/southbridge.h>
 #include <soc/uart.h>

src/soc/amd/cezanne/include/soc/uart.h

@@ -5,7 +5,6 @@
 
 #include <types.h>
 
-void set_uart_config(unsigned int idx); /* configure hardware of FCH UART selected by idx */
 void clear_uart_legacy_config(void); /* disable legacy I/O decode for FCH UART */
 
 #endif /* AMD_CEZANNE_UART_H */

src/soc/amd/common/block/include/amdblocks/uart.h

@@ -16,5 +16,6 @@ struct soc_uart_ctrlr_info {
 
 uintptr_t get_uart_base(unsigned int idx); /* get MMIO base address of FCH UART */
 void uart_inject_ssdt(const struct device *dev);
+void set_uart_config(unsigned int idx); /* configure hardware of FCH UART selected by idx */
 
 #endif /* AMD_BLOCK_UART_H */

src/soc/amd/mendocino/early_fch.c

@@ -9,6 +9,7 @@
 #include <amdblocks/lpc.h>
 #include <amdblocks/pmlib.h>
 #include <amdblocks/smbus.h>
+#include <amdblocks/uart.h>
 #include <soc/i2c.h>
 #include <soc/southbridge.h>
 #include <soc/uart.h>

src/soc/amd/mendocino/include/soc/uart.h

@@ -5,7 +5,6 @@
 
 #include <types.h>
 
-void set_uart_config(unsigned int idx); /* configure hardware of FCH UART selected by idx */
 void clear_uart_legacy_config(void); /* disable legacy I/O decode for FCH UART */
 
 #endif /* AMD_MENDOCINO_UART_H */

src/soc/amd/morgana/early_fch.c

@@ -9,6 +9,7 @@
 #include <amdblocks/lpc.h>
 #include <amdblocks/pmlib.h>
 #include <amdblocks/smbus.h>
+#include <amdblocks/uart.h>
 #include <soc/i2c.h>
 #include <soc/southbridge.h>
 #include <soc/uart.h>

src/soc/amd/morgana/include/soc/uart.h

@@ -7,7 +7,6 @@
 
 #include <types.h>
 
-void set_uart_config(unsigned int idx); /* configure hardware of FCH UART selected by idx */
 void clear_uart_legacy_config(void); /* disable legacy I/O decode for FCH UART */
 
 #endif /* AMD_MORGANA_UART_H */

src/soc/amd/picasso/early_fch.c

@@ -8,6 +8,7 @@
 #include <amdblocks/pmlib.h>
 #include <amdblocks/smbus.h>
 #include <amdblocks/spi.h>
+#include <amdblocks/uart.h>
 #include <soc/i2c.h>
 #include <soc/southbridge.h>
 #include <soc/uart.h>

src/soc/amd/picasso/include/soc/uart.h

@@ -5,7 +5,6 @@
 
 #include <types.h>
 
-void set_uart_config(unsigned int idx); /* configure hardware of FCH UART selected by idx */
 void clear_uart_legacy_config(void); /* disable legacy I/O decode for FCH UART */
 
 #endif /* AMD_PICASSO_UART_H */

src/soc/amd/stoneyridge/early_fch.c

@@ -8,6 +8,7 @@
 #include <amdblocks/reset.h>
 #include <amdblocks/smbus.h>
 #include <amdblocks/spi.h>
+#include <amdblocks/uart.h>
 #include <soc/southbridge.h>
 #include <types.h>
 

src/soc/amd/stoneyridge/include/soc/southbridge.h

@@ -183,8 +183,6 @@ void fch_final(void *chip_info);
 
 void fch_clk_output_48Mhz(u32 osc);
 
-void set_uart_config(unsigned int idx);
-
 /*
  * Call the mainboard to get the USB Over Current Map. The mainboard
  * returns the map and 0 on Success or -1 on error or no map. There is

src/soc/amd/stoneyridge/uart.c

@@ -6,7 +6,6 @@
 #include <soc/aoac_defs.h>
 #include <soc/gpio.h>
 #include <soc/iomap.h>
-#include <soc/southbridge.h>
 #include <types.h>
 
 static const struct soc_uart_ctrlr_info uart_info[] = {