Enable IDE legacy port access for all 440BX based boards per default, as

this is needed (at the very least) to make FILO work on these boards.

Disable UDMA/33 per default, which is slower but the safe choice, as we
don't know which IDE devices a user has attached, and some don't support
UDMA/33 very well or at all.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/a-trend/atc-6220/Config.lb

@@ -130,6 +130,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/asus/p2b-f/Config.lb

@@ -130,6 +130,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 4.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/asus/p2b/Config.lb

@@ -130,6 +130,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 4.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/asus/p3b-f/Config.lb

@@ -131,6 +131,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 4.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/azza/pt-6ibd/Config.lb

@@ -130,6 +130,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/biostar/m6tba/Config.lb

@@ -124,6 +124,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/compaq/deskpro_en_sff_p600/Config.lb

@@ -134,6 +134,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 14.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/gigabyte/ga-6bxc/Config.lb

@@ -128,6 +128,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end

src/mainboard/tyan/s1846/Config.lb

@@ -126,6 +126,12 @@ chip northbridge/intel/i440bx		# Northbridge
       device pci 7.3 on end		# ACPI
       register "ide0_enable" = "1"
       register "ide1_enable" = "1"
+      register "ide_legacy_enable" = "1"
+      # Enable UDMA/33 for higher speed if your IDE device(s) support it.
+      register "ide0_drive0_udma33_enable" = "0"
+      register "ide0_drive1_udma33_enable" = "0"
+      register "ide1_drive0_udma33_enable" = "0"
+      register "ide1_drive1_udma33_enable" = "0"
     end
   end
 end