Initial support for MSI MS-7135 (K8N Neo3) mainboard.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Jonathan A. Kollasch
Stefan Reinauer
parent
787e4c9fd5
commit
8eff1e3d04
|
|
@ -0,0 +1,306 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2007 AMD
|
||||||
|
## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
|
||||||
|
## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
## (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program; if not, write to the Free Software
|
||||||
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
##
|
||||||
|
|
||||||
|
##
|
||||||
|
## Compute the location and size of where this firmware image
|
||||||
|
## (coreboot plus bootloader) will live in the boot rom chip.
|
||||||
|
##
|
||||||
|
if USE_FAILOVER_IMAGE
|
||||||
|
default ROM_SECTION_SIZE = FAILOVER_SIZE
|
||||||
|
default ROM_SECTION_OFFSET = (ROM_SIZE - FAILOVER_SIZE)
|
||||||
|
else
|
||||||
|
if USE_FALLBACK_IMAGE
|
||||||
|
default ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||||
|
default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE)
|
||||||
|
else
|
||||||
|
default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE)
|
||||||
|
default ROM_SECTION_OFFSET = 0
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
##
|
||||||
|
## Compute the start location and size size of the coreboot bootloader.
|
||||||
|
##
|
||||||
|
default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
|
||||||
|
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||||
|
|
||||||
|
##
|
||||||
|
## Compute where this copy of coreboot will start in the boot ROM.
|
||||||
|
##
|
||||||
|
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
|
||||||
|
|
||||||
|
##
|
||||||
|
## Compute a range of ROM that can be cached to speed up coreboot
|
||||||
|
## execution speed.
|
||||||
|
##
|
||||||
|
## XIP_ROM_SIZE must be a power of 2 (here 64 Kbyte)
|
||||||
|
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||||
|
##
|
||||||
|
default XIP_ROM_SIZE = (64 * 1024)
|
||||||
|
|
||||||
|
if USE_FAILOVER_IMAGE
|
||||||
|
default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
|
||||||
|
else
|
||||||
|
if USE_FALLBACK_IMAGE
|
||||||
|
default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
|
||||||
|
else
|
||||||
|
default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
arch i386 end
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build the objects we have code for in this directory.
|
||||||
|
##
|
||||||
|
|
||||||
|
driver mainboard.o
|
||||||
|
|
||||||
|
#dir /drivers/ati/ragexl
|
||||||
|
|
||||||
|
# Needed by irq_tables and mptable and acpi_tables.
|
||||||
|
object get_bus_conf.o
|
||||||
|
|
||||||
|
if HAVE_MP_TABLE
|
||||||
|
object mptable.o
|
||||||
|
end
|
||||||
|
|
||||||
|
if HAVE_PIRQ_TABLE
|
||||||
|
object irq_tables.o
|
||||||
|
end
|
||||||
|
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
if CONFIG_USE_INIT
|
||||||
|
makerule ./auto.o
|
||||||
|
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||||
|
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
|
||||||
|
end
|
||||||
|
else
|
||||||
|
makerule ./auto.inc
|
||||||
|
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||||
|
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
|
||||||
|
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
|
||||||
|
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build our 16 bit and 32 bit coreboot entry code.
|
||||||
|
##
|
||||||
|
if HAVE_FAILOVER_BOOT
|
||||||
|
if USE_FAILOVER_IMAGE
|
||||||
|
mainboardinit cpu/x86/16bit/entry16.inc
|
||||||
|
ldscript /cpu/x86/16bit/entry16.lds
|
||||||
|
end
|
||||||
|
else
|
||||||
|
if USE_FALLBACK_IMAGE
|
||||||
|
mainboardinit cpu/x86/16bit/entry16.inc
|
||||||
|
ldscript /cpu/x86/16bit/entry16.lds
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
mainboardinit cpu/x86/32bit/entry32.inc
|
||||||
|
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
if CONFIG_USE_INIT
|
||||||
|
ldscript /cpu/x86/32bit/entry32.lds
|
||||||
|
ldscript /cpu/amd/car/cache_as_ram.lds
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build our reset vector (this is where coreboot is entered).
|
||||||
|
##
|
||||||
|
if HAVE_FAILOVER_BOOT
|
||||||
|
if USE_FAILOVER_IMAGE
|
||||||
|
mainboardinit cpu/x86/16bit/reset16.inc
|
||||||
|
ldscript /cpu/x86/16bit/reset16.lds
|
||||||
|
else
|
||||||
|
mainboardinit cpu/x86/32bit/reset32.inc
|
||||||
|
ldscript /cpu/x86/32bit/reset32.lds
|
||||||
|
end
|
||||||
|
else
|
||||||
|
if USE_FALLBACK_IMAGE
|
||||||
|
mainboardinit cpu/x86/16bit/reset16.inc
|
||||||
|
ldscript /cpu/x86/16bit/reset16.lds
|
||||||
|
else
|
||||||
|
mainboardinit cpu/x86/32bit/reset32.inc
|
||||||
|
ldscript /cpu/x86/32bit/reset32.lds
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
else
|
||||||
|
### Should this be in the northbridge code?
|
||||||
|
mainboardinit arch/i386/lib/cpu_reset.inc
|
||||||
|
end
|
||||||
|
|
||||||
|
##
|
||||||
|
## Include an ID string (for safe flashing).
|
||||||
|
##
|
||||||
|
mainboardinit southbridge/nvidia/ck804/id.inc
|
||||||
|
ldscript /southbridge/nvidia/ck804/id.lds
|
||||||
|
|
||||||
|
##
|
||||||
|
## ROMSTRAP table for CK804
|
||||||
|
##
|
||||||
|
if HAVE_FAILOVER_BOOT
|
||||||
|
if USE_FAILOVER_IMAGE
|
||||||
|
mainboardinit southbridge/nvidia/ck804/romstrap.inc
|
||||||
|
ldscript /southbridge/nvidia/ck804/romstrap.lds
|
||||||
|
end
|
||||||
|
else
|
||||||
|
if USE_FALLBACK_IMAGE
|
||||||
|
mainboardinit southbridge/nvidia/ck804/romstrap.inc
|
||||||
|
ldscript /southbridge/nvidia/ck804/romstrap.lds
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
##
|
||||||
|
## Setup Cache-As-Ram
|
||||||
|
##
|
||||||
|
mainboardinit cpu/amd/car/cache_as_ram.inc
|
||||||
|
end
|
||||||
|
|
||||||
|
|
||||||
|
###
|
||||||
|
### This is the early phase of coreboot startup.
|
||||||
|
### Things are delicate and we test to see if we should
|
||||||
|
### failover to another image.
|
||||||
|
###
|
||||||
|
if HAVE_FAILOVER_BOOT
|
||||||
|
if USE_FAILOVER_IMAGE
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
ldscript /arch/i386/lib/failover_failover.lds
|
||||||
|
end
|
||||||
|
end
|
||||||
|
else
|
||||||
|
if USE_FALLBACK_IMAGE
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
ldscript /arch/i386/lib/failover.lds
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
###
|
||||||
|
### O.k. We aren't just an intermediary anymore!
|
||||||
|
###
|
||||||
|
|
||||||
|
##
|
||||||
|
## Setup RAM
|
||||||
|
##
|
||||||
|
if USE_DCACHE_RAM
|
||||||
|
if CONFIG_USE_INIT
|
||||||
|
initobject auto.o
|
||||||
|
else
|
||||||
|
mainboardinit ./auto.inc
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
##
|
||||||
|
## Include the secondary configuration files
|
||||||
|
##
|
||||||
|
if CONFIG_CHIP_NAME
|
||||||
|
config chip.h
|
||||||
|
end
|
||||||
|
|
||||||
|
chip northbridge/amd/amdk8/root_complex # Root complex
|
||||||
|
device apic_cluster 0 on # APIC cluster
|
||||||
|
chip cpu/amd/socket_754 # Socket 754 CPU
|
||||||
|
device apic 0 on end # APIC
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
|
device pci_domain 0 on # PCI domain
|
||||||
|
chip northbridge/amd/amdk8 # mc0
|
||||||
|
device pci 18.0 on # Northbridge
|
||||||
|
# Devices on link 0, link 0 == LDT 0
|
||||||
|
chip southbridge/nvidia/ck804 # Southbridge
|
||||||
|
device pci 0.0 on end # HT
|
||||||
|
device pci 1.0 on # LPC
|
||||||
|
chip superio/winbond/w83627thf # Super I/O
|
||||||
|
device pnp 2e.0 off # Floppy
|
||||||
|
io 0x60 = 0x3f0
|
||||||
|
irq 0x70 = 6
|
||||||
|
drq 0x74 = 2
|
||||||
|
end
|
||||||
|
device pnp 2e.1 on # Parallel port
|
||||||
|
io 0x60 = 0x378
|
||||||
|
irq 0x70 = 0
|
||||||
|
end
|
||||||
|
device pnp 2e.2 on # Com1
|
||||||
|
io 0x60 = 0x3f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 2e.3 on # Com2
|
||||||
|
io 0x60 = 0x2f8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 2e.5 on # PS/2 keyboard
|
||||||
|
io 0x60 = 0x60
|
||||||
|
io 0x62 = 0x64
|
||||||
|
irq 0x70 = 1
|
||||||
|
irq 0x72 = 12
|
||||||
|
end
|
||||||
|
device pnp 2e.6 off end # non-existant or undocumented
|
||||||
|
device pnp 2e.7 off end # Game, MIDI, GPIO 1, GPIO 5
|
||||||
|
device pnp 2e.8 off end # GPIO 2
|
||||||
|
device pnp 2e.9 off end # GPIO 3, GPIO 4
|
||||||
|
device pnp 2e.a off end # ACPI
|
||||||
|
device pnp 2e.b on # env monitor
|
||||||
|
io 0x60 = 0x290
|
||||||
|
irq 0x70 = 0
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1.1 on end # SMbus
|
||||||
|
device pci 2.0 on end # USB 1.1
|
||||||
|
device pci 2.1 on end # USB 2
|
||||||
|
device pci 4.0 on end # Onboard audio (ACI)
|
||||||
|
device pci 4.1 off end # Onboard modem (MCI) -- not wired out
|
||||||
|
device pci 6.0 on end # IDE
|
||||||
|
device pci 7.0 on end # SATA 1
|
||||||
|
device pci 8.0 on end # SATA 0
|
||||||
|
device pci 9.0 on end # PCI
|
||||||
|
device pci a.0 on end # NIC
|
||||||
|
device pci b.0 off end # PCI E 3 -- not wired out
|
||||||
|
device pci c.0 off end # PCI E 2 -- not wired out
|
||||||
|
device pci d.0 on end # PCI E 1
|
||||||
|
device pci e.0 on end # PCI E 0
|
||||||
|
register "ide0_enable" = "1"
|
||||||
|
register "ide1_enable" = "1"
|
||||||
|
register "sata0_enable" = "1"
|
||||||
|
register "sata1_enable" = "1"
|
||||||
|
# register "mac_eeprom_smbus" = "3"
|
||||||
|
# register "mac_eeprom_addr" = "0x51"
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 18.1 on end
|
||||||
|
device pci 18.2 on end
|
||||||
|
device pci 18.3 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,321 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
## (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program; if not, write to the Free Software
|
||||||
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
##
|
||||||
|
|
||||||
|
uses HAVE_MP_TABLE
|
||||||
|
uses HAVE_PIRQ_TABLE
|
||||||
|
uses USE_FALLBACK_IMAGE
|
||||||
|
uses USE_FAILOVER_IMAGE
|
||||||
|
uses HAVE_FALLBACK_BOOT
|
||||||
|
uses HAVE_FAILOVER_BOOT
|
||||||
|
uses HAVE_HARD_RESET
|
||||||
|
uses IRQ_SLOT_COUNT
|
||||||
|
uses HAVE_OPTION_TABLE
|
||||||
|
uses CONFIG_MAX_CPUS
|
||||||
|
uses CONFIG_MAX_PHYSICAL_CPUS
|
||||||
|
uses CONFIG_LOGICAL_CPUS
|
||||||
|
uses CONFIG_IOAPIC
|
||||||
|
uses CONFIG_SMP
|
||||||
|
uses FALLBACK_SIZE
|
||||||
|
uses FAILOVER_SIZE
|
||||||
|
uses ROM_SIZE
|
||||||
|
uses ROM_SECTION_SIZE
|
||||||
|
uses ROM_IMAGE_SIZE
|
||||||
|
uses ROM_SECTION_SIZE
|
||||||
|
uses ROM_SECTION_OFFSET
|
||||||
|
uses CONFIG_ROM_PAYLOAD
|
||||||
|
uses CONFIG_ROM_PAYLOAD_START
|
||||||
|
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
||||||
|
uses PAYLOAD_SIZE
|
||||||
|
uses _ROMBASE
|
||||||
|
uses XIP_ROM_SIZE
|
||||||
|
uses XIP_ROM_BASE
|
||||||
|
uses STACK_SIZE
|
||||||
|
uses HEAP_SIZE
|
||||||
|
uses USE_OPTION_TABLE
|
||||||
|
uses LB_CKS_RANGE_START
|
||||||
|
uses LB_CKS_RANGE_END
|
||||||
|
uses LB_CKS_LOC
|
||||||
|
uses MAINBOARD_PART_NUMBER
|
||||||
|
uses MAINBOARD_VENDOR
|
||||||
|
uses MAINBOARD
|
||||||
|
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
||||||
|
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
||||||
|
uses COREBOOT_EXTRA_VERSION
|
||||||
|
uses _RAMBASE
|
||||||
|
uses CONFIG_GDB_STUB
|
||||||
|
uses CROSS_COMPILE
|
||||||
|
uses CC
|
||||||
|
uses HOSTCC
|
||||||
|
uses OBJCOPY
|
||||||
|
uses TTYS0_BAUD
|
||||||
|
uses TTYS0_BASE
|
||||||
|
uses TTYS0_LCS
|
||||||
|
uses DEFAULT_CONSOLE_LOGLEVEL
|
||||||
|
uses MAXIMUM_CONSOLE_LOGLEVEL
|
||||||
|
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
||||||
|
uses CONFIG_CONSOLE_SERIAL8250
|
||||||
|
uses CONFIG_CONSOLE_BTEXT
|
||||||
|
uses HAVE_INIT_TIMER
|
||||||
|
uses CONFIG_GDB_STUB
|
||||||
|
uses CONFIG_CHIP_NAME
|
||||||
|
uses CONFIG_CONSOLE_VGA
|
||||||
|
uses CONFIG_PCI_ROM_RUN
|
||||||
|
uses HW_MEM_HOLE_SIZEK
|
||||||
|
|
||||||
|
uses USE_DCACHE_RAM
|
||||||
|
uses DCACHE_RAM_BASE
|
||||||
|
uses DCACHE_RAM_SIZE
|
||||||
|
uses CONFIG_USE_INIT
|
||||||
|
uses DCACHE_RAM_GLOBAL_VAR_SIZE
|
||||||
|
uses CONFIG_AP_CODE_IN_CAR
|
||||||
|
uses MEM_TRAIN_SEQ
|
||||||
|
uses WAIT_BEFORE_CPUS_INIT
|
||||||
|
|
||||||
|
uses ENABLE_APIC_EXT_ID
|
||||||
|
uses APIC_ID_OFFSET
|
||||||
|
uses LIFT_BSP_APIC_ID
|
||||||
|
|
||||||
|
uses CONFIG_PCI_64BIT_PREF_MEM
|
||||||
|
|
||||||
|
uses HT_CHAIN_UNITID_BASE
|
||||||
|
uses HT_CHAIN_END_UNITID_BASE
|
||||||
|
uses SB_HT_CHAIN_ON_BUS0
|
||||||
|
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
|
||||||
|
|
||||||
|
uses CONFIG_LB_MEM_TOPK
|
||||||
|
|
||||||
|
|
||||||
|
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||||
|
## ---> 512 Kbytes
|
||||||
|
default ROM_SIZE=(512*1024)
|
||||||
|
|
||||||
|
##
|
||||||
|
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
|
||||||
|
##
|
||||||
|
default FALLBACK_SIZE=(252*1024)
|
||||||
|
|
||||||
|
#FAILOVER: 4K
|
||||||
|
default FAILOVER_SIZE=(4*1024)
|
||||||
|
|
||||||
|
###
|
||||||
|
### Build options
|
||||||
|
###
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code for the fallback boot
|
||||||
|
##
|
||||||
|
default HAVE_FALLBACK_BOOT=1
|
||||||
|
default HAVE_FAILOVER_BOOT=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to reset the motherboard from coreboot
|
||||||
|
##
|
||||||
|
default HAVE_HARD_RESET=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to export a programmable irq routing table
|
||||||
|
##
|
||||||
|
default HAVE_PIRQ_TABLE=1
|
||||||
|
default IRQ_SLOT_COUNT=13
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to export an x86 MP table
|
||||||
|
## Useful for specifying IRQ routing values
|
||||||
|
##
|
||||||
|
default HAVE_MP_TABLE=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to export a CMOS option table
|
||||||
|
##
|
||||||
|
default HAVE_OPTION_TABLE=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Move the default coreboot cmos range off of AMD RTC registers
|
||||||
|
##
|
||||||
|
default LB_CKS_RANGE_START=49
|
||||||
|
default LB_CKS_RANGE_END=122
|
||||||
|
default LB_CKS_LOC=123
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code for SMP support
|
||||||
|
## Only worry about 2 micro processors
|
||||||
|
##
|
||||||
|
default CONFIG_SMP=1
|
||||||
|
default CONFIG_MAX_CPUS=2
|
||||||
|
default CONFIG_MAX_PHYSICAL_CPUS=1
|
||||||
|
default CONFIG_LOGICAL_CPUS=1
|
||||||
|
|
||||||
|
#1G memory hole
|
||||||
|
default HW_MEM_HOLE_SIZEK=0x100000
|
||||||
|
|
||||||
|
##HT Unit ID offset, default is 1, the typical one
|
||||||
|
default HT_CHAIN_UNITID_BASE=0
|
||||||
|
|
||||||
|
##real SB Unit ID, default is 0x20, mean dont touch it at last
|
||||||
|
#default HT_CHAIN_END_UNITID_BASE=0x10
|
||||||
|
|
||||||
|
#make the SB HT chain on bus 0, default is not (0)
|
||||||
|
default SB_HT_CHAIN_ON_BUS0=2
|
||||||
|
|
||||||
|
##only offset for SB chain?, default is yes(1)
|
||||||
|
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
|
||||||
|
|
||||||
|
#BTEXT Console
|
||||||
|
#default CONFIG_CONSOLE_BTEXT=1
|
||||||
|
|
||||||
|
#VGA Console
|
||||||
|
default CONFIG_CONSOLE_VGA=1
|
||||||
|
default CONFIG_PCI_ROM_RUN=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## enable CACHE_AS_RAM specifics
|
||||||
|
##
|
||||||
|
default USE_DCACHE_RAM=1
|
||||||
|
#default DCACHE_RAM_BASE=0xcf000
|
||||||
|
#default DCACHE_RAM_SIZE=0x1000
|
||||||
|
default DCACHE_RAM_BASE=0xc8000
|
||||||
|
default DCACHE_RAM_SIZE=0x08000
|
||||||
|
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
|
||||||
|
default CONFIG_USE_INIT=0
|
||||||
|
|
||||||
|
default CONFIG_AP_CODE_IN_CAR=0
|
||||||
|
default MEM_TRAIN_SEQ=2
|
||||||
|
default WAIT_BEFORE_CPUS_INIT=0
|
||||||
|
|
||||||
|
## APIC stuff
|
||||||
|
#default ENABLE_APIC_EXT_ID=0
|
||||||
|
#default APIC_ID_OFFSET=0x10
|
||||||
|
#default LIFT_BSP_APIC_ID=0
|
||||||
|
|
||||||
|
|
||||||
|
#default CONFIG_PCI_64BIT_PREF_MEM=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Build code to setup a generic IOAPIC
|
||||||
|
##
|
||||||
|
default CONFIG_IOAPIC=1
|
||||||
|
|
||||||
|
##
|
||||||
|
## Clean up the motherboard id strings
|
||||||
|
##
|
||||||
|
default MAINBOARD_PART_NUMBER="K8N Neo3 (MS-7135)"
|
||||||
|
default MAINBOARD_VENDOR="MSI"
|
||||||
|
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1462
|
||||||
|
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x7135
|
||||||
|
|
||||||
|
###
|
||||||
|
### coreboot layout values
|
||||||
|
###
|
||||||
|
|
||||||
|
## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
|
||||||
|
default ROM_IMAGE_SIZE = (64*1024)
|
||||||
|
#65536
|
||||||
|
|
||||||
|
##
|
||||||
|
## Use a small 8K stack
|
||||||
|
##
|
||||||
|
default STACK_SIZE=0x2000
|
||||||
|
|
||||||
|
##
|
||||||
|
## Use a small 16K heap
|
||||||
|
##
|
||||||
|
default HEAP_SIZE=0x4000
|
||||||
|
|
||||||
|
##
|
||||||
|
## Only use the option table in a normal image
|
||||||
|
##
|
||||||
|
#efault USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||||
|
default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
|
||||||
|
|
||||||
|
##
|
||||||
|
## coreboot C code runs at this location in RAM
|
||||||
|
##
|
||||||
|
default _RAMBASE=0x00004000
|
||||||
|
|
||||||
|
##
|
||||||
|
## Load the payload from the ROM
|
||||||
|
##
|
||||||
|
default CONFIG_ROM_PAYLOAD = 1
|
||||||
|
|
||||||
|
###
|
||||||
|
### Defaults of options that you may want to override in the target config file
|
||||||
|
###
|
||||||
|
|
||||||
|
##
|
||||||
|
## The default compiler
|
||||||
|
##
|
||||||
|
default CC="$(CROSS_COMPILE)gcc -m32"
|
||||||
|
default HOSTCC="gcc"
|
||||||
|
|
||||||
|
##
|
||||||
|
## Disable the gdb stub by default
|
||||||
|
##
|
||||||
|
default CONFIG_GDB_STUB=0
|
||||||
|
|
||||||
|
##
|
||||||
|
## The Serial Console
|
||||||
|
##
|
||||||
|
|
||||||
|
# To Enable the Serial Console
|
||||||
|
default CONFIG_CONSOLE_SERIAL8250=1
|
||||||
|
|
||||||
|
## Select the serial console baud rate
|
||||||
|
default TTYS0_BAUD=115200
|
||||||
|
#default TTYS0_BAUD=57600
|
||||||
|
#default TTYS0_BAUD=38400
|
||||||
|
#default TTYS0_BAUD=19200
|
||||||
|
#default TTYS0_BAUD=9600
|
||||||
|
#default TTYS0_BAUD=4800
|
||||||
|
#default TTYS0_BAUD=2400
|
||||||
|
#default TTYS0_BAUD=1200
|
||||||
|
|
||||||
|
# Select the serial console base port
|
||||||
|
default TTYS0_BASE=0x3f8
|
||||||
|
|
||||||
|
# Select the serial protocol
|
||||||
|
# This defaults to 8 data bits, 1 stop bit, and no parity
|
||||||
|
default TTYS0_LCS=0x3
|
||||||
|
|
||||||
|
##
|
||||||
|
### Select the coreboot loglevel
|
||||||
|
##
|
||||||
|
## EMERG 1 system is unusable
|
||||||
|
## ALERT 2 action must be taken immediately
|
||||||
|
## CRIT 3 critical conditions
|
||||||
|
## ERR 4 error conditions
|
||||||
|
## WARNING 5 warning conditions
|
||||||
|
## NOTICE 6 normal but significant condition
|
||||||
|
## INFO 7 informational
|
||||||
|
## DEBUG 8 debug-level messages
|
||||||
|
## SPEW 9 Way too many details
|
||||||
|
|
||||||
|
## Request this level of debugging output
|
||||||
|
default DEFAULT_CONSOLE_LOGLEVEL=8
|
||||||
|
## At a maximum only compile in this level of debugging
|
||||||
|
default MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||||
|
|
||||||
|
##
|
||||||
|
## Select power on after power fail setting
|
||||||
|
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
|
||||||
|
|
||||||
|
### End Options.lb
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,276 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 AMD
|
||||||
|
* (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
|
||||||
|
* Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
* (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
* Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define ASSEMBLY 1
|
||||||
|
#define __ROMCC__
|
||||||
|
|
||||||
|
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||||
|
|
||||||
|
/* Used by raminit. */
|
||||||
|
#define QRANK_DIMM_SUPPORT 1
|
||||||
|
|
||||||
|
/* Turn this on for SMBus debugging output. */
|
||||||
|
#define DEBUG_SMBUS 0
|
||||||
|
|
||||||
|
#if CONFIG_LOGICAL_CPUS == 1
|
||||||
|
#define SET_NB_CFG_54 1
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <device/pci_def.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <device/pnp_def.h>
|
||||||
|
#include <arch/romcc_io.h>
|
||||||
|
#include <cpu/x86/lapic.h>
|
||||||
|
#include "option_table.h"
|
||||||
|
#include "pc80/mc146818rtc_early.c"
|
||||||
|
#include "cpu/x86/lapic/boot_cpu.c"
|
||||||
|
#include "northbridge/amd/amdk8/reset_test.c"
|
||||||
|
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
|
||||||
|
|
||||||
|
#if USE_FAILOVER_IMAGE == 0
|
||||||
|
|
||||||
|
/* Used by ck804_early_setup(). */
|
||||||
|
#define CK804_NUM 1
|
||||||
|
#define CK804_USE_NIC 1
|
||||||
|
#define CK804_USE_ACI 1
|
||||||
|
|
||||||
|
#if CONFIG_USE_INIT == 0
|
||||||
|
#include "lib/memcpy.c"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <cpu/amd/model_fxx_rev.h>
|
||||||
|
#include "pc80/serial.c"
|
||||||
|
#include "arch/i386/lib/console.c"
|
||||||
|
#include "ram/ramtest.c"
|
||||||
|
#include "northbridge/amd/amdk8/incoherent_ht.c"
|
||||||
|
#include "southbridge/nvidia/ck804/ck804_early_smbus.c"
|
||||||
|
#include "northbridge/amd/amdk8/raminit.h"
|
||||||
|
#include "cpu/amd/model_fxx/apic_timer.c"
|
||||||
|
#include "lib/delay.c"
|
||||||
|
#include "northbridge/amd/amdk8/debug.c"
|
||||||
|
#include "cpu/amd/mtrr/amd_earlymtrr.c"
|
||||||
|
#include "cpu/x86/bist.h"
|
||||||
|
#include "northbridge/amd/amdk8/setup_resource_map.c"
|
||||||
|
#include "northbridge/amd/amdk8/coherent_ht.c"
|
||||||
|
#include "cpu/amd/dualcore/dualcore.c"
|
||||||
|
|
||||||
|
static void memreset_setup(void)
|
||||||
|
{
|
||||||
|
/* FIXME: Nothing to do? */
|
||||||
|
}
|
||||||
|
|
||||||
|
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||||
|
{
|
||||||
|
/* FIXME: Nothing to do? */
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline void activate_spd_rom(const struct mem_controller *ctrl)
|
||||||
|
{
|
||||||
|
/* FIXME: Nothing to do? */
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||||
|
{
|
||||||
|
return smbus_read_byte(device, address);
|
||||||
|
}
|
||||||
|
|
||||||
|
#include "northbridge/amd/amdk8/raminit.c"
|
||||||
|
#include "sdram/generic_sdram.c"
|
||||||
|
#include "southbridge/nvidia/ck804/ck804_early_setup_ss.h"
|
||||||
|
#include "southbridge/nvidia/ck804/ck804_early_setup_car.c"
|
||||||
|
#include "cpu/amd/car/copy_and_run.c"
|
||||||
|
#include "cpu/amd/car/post_cache_as_ram.c"
|
||||||
|
#include "cpu/amd/model_fxx/init_cpus.c"
|
||||||
|
|
||||||
|
#endif /* USE_FAILOVER_IMAGE */
|
||||||
|
|
||||||
|
#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) \
|
||||||
|
|| ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
|
||||||
|
|
||||||
|
#include "southbridge/nvidia/ck804/ck804_enable_rom.c"
|
||||||
|
#include "northbridge/amd/amdk8/early_ht.c"
|
||||||
|
|
||||||
|
static void sio_setup(void)
|
||||||
|
{
|
||||||
|
unsigned value;
|
||||||
|
uint32_t dword;
|
||||||
|
uint8_t byte;
|
||||||
|
|
||||||
|
/* Subject decoding */
|
||||||
|
byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b);
|
||||||
|
byte |= 0x20;
|
||||||
|
pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte);
|
||||||
|
|
||||||
|
/* LPC Positive Decode 0 */
|
||||||
|
dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0);
|
||||||
|
/* Serial 0, Serial 1 */
|
||||||
|
dword |= (1 << 0) | (1 << 1);
|
||||||
|
pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword);
|
||||||
|
}
|
||||||
|
|
||||||
|
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||||
|
{
|
||||||
|
unsigned last_boot_normal_x = last_boot_normal();
|
||||||
|
|
||||||
|
/* Is this a CPU only reset? Or is this a secondary CPU? */
|
||||||
|
if ((cpu_init_detectedx) || (!boot_cpu())) {
|
||||||
|
if (last_boot_normal_x) {
|
||||||
|
goto normal_image;
|
||||||
|
} else {
|
||||||
|
goto fallback_image;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Nothing special needs to be done to find bus 0 */
|
||||||
|
/* Allow the HT devices to be found */
|
||||||
|
enumerate_ht_chain();
|
||||||
|
|
||||||
|
sio_setup();
|
||||||
|
|
||||||
|
/* Setup the ck804 */
|
||||||
|
ck804_enable_rom();
|
||||||
|
|
||||||
|
/* Is this a deliberate reset by the BIOS? */
|
||||||
|
if (bios_reset_detected() && last_boot_normal_x) {
|
||||||
|
goto normal_image;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* This is the primary CPU. How should I boot? */
|
||||||
|
else if (do_normal_boot()) {
|
||||||
|
goto normal_image;
|
||||||
|
} else {
|
||||||
|
goto fallback_image;
|
||||||
|
}
|
||||||
|
|
||||||
|
normal_image:
|
||||||
|
__asm__ volatile ("jmp __normal_image"
|
||||||
|
: /* outputs */
|
||||||
|
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
|
||||||
|
);
|
||||||
|
|
||||||
|
fallback_image:
|
||||||
|
|
||||||
|
#if HAVE_FAILOVER_BOOT == 1
|
||||||
|
__asm__ volatile ("jmp __fallback_image"
|
||||||
|
: /* outputs */
|
||||||
|
:"a" (bist), "b"(cpu_init_detectedx) /* inputs */
|
||||||
|
)
|
||||||
|
#endif
|
||||||
|
;
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif /* ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) ... */
|
||||||
|
|
||||||
|
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
|
||||||
|
|
||||||
|
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||||
|
{
|
||||||
|
#if HAVE_FAILOVER_BOOT == 1
|
||||||
|
#if USE_FAILOVER_IMAGE == 1
|
||||||
|
failover_process(bist, cpu_init_detectedx);
|
||||||
|
#else
|
||||||
|
real_main(bist, cpu_init_detectedx);
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
#if USE_FALLBACK_IMAGE == 1
|
||||||
|
failover_process(bist, cpu_init_detectedx);
|
||||||
|
#endif
|
||||||
|
real_main(bist, cpu_init_detectedx);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
#if USE_FAILOVER_IMAGE == 0
|
||||||
|
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||||
|
{
|
||||||
|
static const uint16_t spd_addr[] = {
|
||||||
|
(0xa << 3) | 0, (0xa << 3) | 1, 0, 0,
|
||||||
|
0, 0, 0, 0,
|
||||||
|
0, 0, 0, 0,
|
||||||
|
0, 0, 0, 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
int needs_reset;
|
||||||
|
unsigned bsp_apicid = 0;
|
||||||
|
|
||||||
|
struct mem_controller ctrl[8];
|
||||||
|
unsigned nodes;
|
||||||
|
|
||||||
|
if (bist == 0) {
|
||||||
|
bsp_apicid = init_cpus(cpu_init_detectedx);
|
||||||
|
}
|
||||||
|
|
||||||
|
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||||
|
uart_init();
|
||||||
|
console_init();
|
||||||
|
|
||||||
|
/* Halt if there was a built in self test failure */
|
||||||
|
report_bist_failure(bist);
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
dump_pci_device(PCI_DEV(0, 0x18, 0));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
needs_reset = setup_coherent_ht_domain();
|
||||||
|
|
||||||
|
wait_all_core0_started();
|
||||||
|
#if CONFIG_LOGICAL_CPUS==1
|
||||||
|
// It is said that we should start core1 after all core0 launched
|
||||||
|
start_other_cores();
|
||||||
|
wait_all_other_cores_started(bsp_apicid);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
needs_reset |= ht_setup_chains_x();
|
||||||
|
|
||||||
|
needs_reset |= ck804_early_setup_x();
|
||||||
|
|
||||||
|
if (needs_reset) {
|
||||||
|
print_info("ht reset -\r\n");
|
||||||
|
soft_reset();
|
||||||
|
}
|
||||||
|
|
||||||
|
allow_all_aps_stop(bsp_apicid);
|
||||||
|
|
||||||
|
nodes = get_nodes();
|
||||||
|
//It's the time to set ctrl now;
|
||||||
|
fill_mem_ctrl(nodes, ctrl, spd_addr);
|
||||||
|
|
||||||
|
enable_smbus();
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
dump_spd_registers(&ctrl[0]);
|
||||||
|
dump_smbus_registers();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
memreset_setup();
|
||||||
|
sdram_initialize(nodes, ctrl);
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
print_pci_devices();
|
||||||
|
dump_pci_devices();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
post_cache_as_ram();
|
||||||
|
}
|
||||||
|
#endif /* USE_FAILOVER_IMAGE */
|
||||||
|
|
@ -0,0 +1,25 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
extern struct chip_operations mainboard_msi_ms7135_ops;
|
||||||
|
|
||||||
|
struct mainboard_ms7135_config {
|
||||||
|
int nothing;
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,98 @@
|
||||||
|
entries
|
||||||
|
|
||||||
|
#start-bit length config config-ID name
|
||||||
|
#0 8 r 0 seconds
|
||||||
|
#8 8 r 0 alarm_seconds
|
||||||
|
#16 8 r 0 minutes
|
||||||
|
#24 8 r 0 alarm_minutes
|
||||||
|
#32 8 r 0 hours
|
||||||
|
#40 8 r 0 alarm_hours
|
||||||
|
#48 8 r 0 day_of_week
|
||||||
|
#56 8 r 0 day_of_month
|
||||||
|
#64 8 r 0 month
|
||||||
|
#72 8 r 0 year
|
||||||
|
#80 4 r 0 rate_select
|
||||||
|
#84 3 r 0 REF_Clock
|
||||||
|
#87 1 r 0 UIP
|
||||||
|
#88 1 r 0 auto_switch_DST
|
||||||
|
#89 1 r 0 24_hour_mode
|
||||||
|
#90 1 r 0 binary_values_enable
|
||||||
|
#91 1 r 0 square-wave_out_enable
|
||||||
|
#92 1 r 0 update_finished_enable
|
||||||
|
#93 1 r 0 alarm_interrupt_enable
|
||||||
|
#94 1 r 0 periodic_interrupt_enable
|
||||||
|
#95 1 r 0 disable_clock_updates
|
||||||
|
#96 288 r 0 temporary_filler
|
||||||
|
0 384 r 0 reserved_memory
|
||||||
|
384 1 e 4 boot_option
|
||||||
|
385 1 e 4 last_boot
|
||||||
|
386 1 e 1 ECC_memory
|
||||||
|
388 4 r 0 reboot_bits
|
||||||
|
392 3 e 5 baud_rate
|
||||||
|
395 1 e 1 hw_scrubber
|
||||||
|
396 1 e 1 interleave_chip_selects
|
||||||
|
397 2 e 8 max_mem_clock
|
||||||
|
399 1 e 2 dual_core
|
||||||
|
400 1 e 1 power_on_after_fail
|
||||||
|
412 4 e 6 debug_level
|
||||||
|
416 4 e 7 boot_first
|
||||||
|
420 4 e 7 boot_second
|
||||||
|
424 4 e 7 boot_third
|
||||||
|
428 4 h 0 boot_index
|
||||||
|
432 8 h 0 boot_countdown
|
||||||
|
440 4 e 9 slow_cpu
|
||||||
|
444 1 e 1 nmi
|
||||||
|
445 1 e 1 iommu
|
||||||
|
728 256 h 0 user_data
|
||||||
|
984 16 h 0 check_sum
|
||||||
|
# Reserve the extended AMD configuration registers
|
||||||
|
1000 24 r 0 reserved_memory
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
enumerations
|
||||||
|
|
||||||
|
#ID value text
|
||||||
|
1 0 Disable
|
||||||
|
1 1 Enable
|
||||||
|
2 0 Enable
|
||||||
|
2 1 Disable
|
||||||
|
4 0 Fallback
|
||||||
|
4 1 Normal
|
||||||
|
5 0 115200
|
||||||
|
5 1 57600
|
||||||
|
5 2 38400
|
||||||
|
5 3 19200
|
||||||
|
5 4 9600
|
||||||
|
5 5 4800
|
||||||
|
5 6 2400
|
||||||
|
5 7 1200
|
||||||
|
6 6 Notice
|
||||||
|
6 7 Info
|
||||||
|
6 8 Debug
|
||||||
|
6 9 Spew
|
||||||
|
7 0 Network
|
||||||
|
7 1 HDD
|
||||||
|
7 2 Floppy
|
||||||
|
7 8 Fallback_Network
|
||||||
|
7 9 Fallback_HDD
|
||||||
|
7 10 Fallback_Floppy
|
||||||
|
#7 3 ROM
|
||||||
|
8 0 400Mhz
|
||||||
|
8 1 333Mhz
|
||||||
|
8 2 266Mhz
|
||||||
|
8 3 200Mhz
|
||||||
|
9 0 off
|
||||||
|
9 1 87.5%
|
||||||
|
9 2 75.0%
|
||||||
|
9 3 62.5%
|
||||||
|
9 4 50.0%
|
||||||
|
9 5 37.5%
|
||||||
|
9 6 25.0%
|
||||||
|
9 7 12.5%
|
||||||
|
|
||||||
|
checksums
|
||||||
|
|
||||||
|
checksum 392 983 984
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -0,0 +1,127 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 AMD
|
||||||
|
* (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
|
||||||
|
* Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
* (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
* Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#if CONFIG_LOGICAL_CPUS == 1
|
||||||
|
#include <cpu/amd/dualcore.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <cpu/amd/amdk8_sysconf.h>
|
||||||
|
|
||||||
|
/* Global variables for MB layouts and these will be shared by irqtable,
|
||||||
|
* mptable and acpi_tables.
|
||||||
|
*/
|
||||||
|
/* busnum is default */
|
||||||
|
unsigned char bus_isa;
|
||||||
|
unsigned char bus_ck804[6];
|
||||||
|
unsigned apicid_ck804;
|
||||||
|
|
||||||
|
unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
|
||||||
|
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
|
||||||
|
0x0000ff0, //no HTIO for ms7135
|
||||||
|
};
|
||||||
|
unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
|
||||||
|
0x20202020, //ms7135 has only one ht-chain
|
||||||
|
};
|
||||||
|
unsigned bus_type[256];
|
||||||
|
|
||||||
|
extern void get_sblk_pci1234(void);
|
||||||
|
|
||||||
|
static unsigned get_bus_conf_done = 0;
|
||||||
|
|
||||||
|
void get_bus_conf(void)
|
||||||
|
{
|
||||||
|
unsigned apicid_base;
|
||||||
|
|
||||||
|
device_t dev;
|
||||||
|
unsigned sbdn;
|
||||||
|
int i, j;
|
||||||
|
|
||||||
|
if (get_bus_conf_done == 1)
|
||||||
|
return; //do it only once
|
||||||
|
|
||||||
|
get_bus_conf_done = 1;
|
||||||
|
|
||||||
|
sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]);
|
||||||
|
sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]);
|
||||||
|
for (i = 0; i < sysconf.hc_possible_num; i++) {
|
||||||
|
sysconf.pci1234[i] = pci1234x[i];
|
||||||
|
sysconf.hcdn[i] = hcdnx[i];
|
||||||
|
}
|
||||||
|
|
||||||
|
get_sblk_pci1234();
|
||||||
|
|
||||||
|
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
|
||||||
|
sbdn = sysconf.sbdn;
|
||||||
|
|
||||||
|
for (i = 0; i < 6; i++) {
|
||||||
|
bus_ck804[i] = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
for (i = 0; i < 256; i++) {
|
||||||
|
bus_type[i] = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
bus_type[0] = 1; //pci
|
||||||
|
|
||||||
|
bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff;
|
||||||
|
|
||||||
|
bus_type[bus_ck804[0]] = 1;
|
||||||
|
|
||||||
|
/* CK804 */
|
||||||
|
int dn = -1;
|
||||||
|
for (i = 1; i < 4; i++) {
|
||||||
|
switch (i) {
|
||||||
|
case 1: dn = 9; break;
|
||||||
|
case 2: dn = 13; break;
|
||||||
|
case 3: dn = 14; break;
|
||||||
|
default: dn = -1; break;
|
||||||
|
}
|
||||||
|
dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0));
|
||||||
|
if (dev) {
|
||||||
|
bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||||
|
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||||
|
bus_isa++;
|
||||||
|
for (j = bus_ck804[i]; j < bus_isa; j++)
|
||||||
|
bus_type[j] = 1;
|
||||||
|
} else {
|
||||||
|
printk_debug
|
||||||
|
("ERROR - could not find PCI %02x:%02x.0, using defaults\n",
|
||||||
|
bus_ck804[0], sbdn + dn);
|
||||||
|
bus_isa = bus_ck804[i - 1] + 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/*I/O APICs: APIC ID Version State Address*/
|
||||||
|
#if CONFIG_LOGICAL_CPUS==1
|
||||||
|
apicid_base = get_apicid_base(3);
|
||||||
|
#else
|
||||||
|
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
|
||||||
|
#endif
|
||||||
|
apicid_ck804 = apicid_base + 0;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,265 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 AMD
|
||||||
|
* (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
|
||||||
|
* Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
* (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
* Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */
|
||||||
|
|
||||||
|
/* This is probably not right, feel free to fix this if you don't want
|
||||||
|
* to use the mptable.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <arch/pirq_routing.h>
|
||||||
|
#include <cpu/amd/amdk8_sysconf.h>
|
||||||
|
|
||||||
|
extern unsigned char bus_isa;
|
||||||
|
extern unsigned char bus_ck804[6];
|
||||||
|
extern void get_bus_conf(void);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Add one line to IRQ table.
|
||||||
|
*/
|
||||||
|
static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus,
|
||||||
|
uint8_t devfn, uint8_t link0, uint16_t bitmap0,
|
||||||
|
uint8_t link1, uint16_t bitmap1, uint8_t link2,
|
||||||
|
uint16_t bitmap2, uint8_t link3, uint16_t bitmap3,
|
||||||
|
uint8_t slot, uint8_t rfu)
|
||||||
|
{
|
||||||
|
pirq_info->bus = bus;
|
||||||
|
pirq_info->devfn = devfn;
|
||||||
|
pirq_info->irq[0].link = link0;
|
||||||
|
pirq_info->irq[0].bitmap = bitmap0;
|
||||||
|
pirq_info->irq[1].link = link1;
|
||||||
|
pirq_info->irq[1].bitmap = bitmap1;
|
||||||
|
pirq_info->irq[2].link = link2;
|
||||||
|
pirq_info->irq[2].bitmap = bitmap2;
|
||||||
|
pirq_info->irq[3].link = link3;
|
||||||
|
pirq_info->irq[3].bitmap = bitmap3;
|
||||||
|
pirq_info->slot = slot;
|
||||||
|
pirq_info->rfu = rfu;
|
||||||
|
}
|
||||||
|
|
||||||
|
void pci_assign_irqs(unsigned, unsigned, const unsigned char *);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Create the IRQ routing table.
|
||||||
|
* Values are derived from getpir generated code.
|
||||||
|
*/
|
||||||
|
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||||
|
{
|
||||||
|
|
||||||
|
struct irq_routing_table *pirq;
|
||||||
|
struct irq_info *pirq_info;
|
||||||
|
unsigned slot_num;
|
||||||
|
uint8_t *v;
|
||||||
|
|
||||||
|
uint8_t sum = 0;
|
||||||
|
int i;
|
||||||
|
unsigned sbdn;
|
||||||
|
|
||||||
|
/* get_bus_conf() will find out all bus num and apic that share with
|
||||||
|
* mptable.c and mptable.c
|
||||||
|
*/
|
||||||
|
get_bus_conf();
|
||||||
|
sbdn = sysconf.sbdn;
|
||||||
|
|
||||||
|
/* Align the table to be 16 byte aligned. */
|
||||||
|
addr += 15;
|
||||||
|
addr &= ~15;
|
||||||
|
|
||||||
|
/* This table must be betweeen 0xf0000 & 0x100000 */
|
||||||
|
printk_info("Writing IRQ routing tables to 0x%x...", addr);
|
||||||
|
|
||||||
|
pirq = (void *)(addr);
|
||||||
|
v = (uint8_t *) (addr);
|
||||||
|
|
||||||
|
pirq->signature = PIRQ_SIGNATURE;
|
||||||
|
pirq->version = PIRQ_VERSION;
|
||||||
|
|
||||||
|
pirq->rtr_bus = bus_ck804[0];
|
||||||
|
pirq->rtr_devfn = ((sbdn + 9) << 3) | 0;
|
||||||
|
|
||||||
|
pirq->exclusive_irqs = 0x828;
|
||||||
|
|
||||||
|
pirq->rtr_vendor = 0x10de;
|
||||||
|
pirq->rtr_device = 0x005c;
|
||||||
|
|
||||||
|
pirq->miniport_data = 0;
|
||||||
|
|
||||||
|
memset(pirq->rfu, 0, sizeof(pirq->rfu));
|
||||||
|
|
||||||
|
pirq_info = (void *)(&pirq->checksum + 1);
|
||||||
|
slot_num = 0;
|
||||||
|
|
||||||
|
//Slot1 PCIE 16x
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4,
|
||||||
|
0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//Slot2 PCIE 1x
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1,
|
||||||
|
0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//Slot3 PCIE 1x
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2,
|
||||||
|
0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//Slot4 PCIE 4x
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0,
|
||||||
|
0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8,
|
||||||
|
7, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//Slot5 - 7 PCI
|
||||||
|
for (i = 0; i < 3; i++) {
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0,
|
||||||
|
((i + 0) % 4) + 1, 0xdeb8,
|
||||||
|
((i + 1) % 4) + 1, 0xdeb8,
|
||||||
|
((i + 2) % 4) + 1, 0xdeb8,
|
||||||
|
((i + 3) % 4) + 1, 0xdeb8, i, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
}
|
||||||
|
|
||||||
|
//pci bridge
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1,
|
||||||
|
0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//smbus
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2,
|
||||||
|
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//usb
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1,
|
||||||
|
0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
//audio
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1,
|
||||||
|
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
//sata
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1,
|
||||||
|
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
//sata
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1,
|
||||||
|
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
//nic
|
||||||
|
write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1,
|
||||||
|
0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0);
|
||||||
|
pirq_info++;
|
||||||
|
slot_num++;
|
||||||
|
|
||||||
|
pirq->size = 32 + 16 * slot_num;
|
||||||
|
|
||||||
|
for (i = 0; i < pirq->size; i++)
|
||||||
|
sum += v[i];
|
||||||
|
|
||||||
|
sum = pirq->checksum - sum;
|
||||||
|
|
||||||
|
if (sum != pirq->checksum) {
|
||||||
|
pirq->checksum = sum;
|
||||||
|
}
|
||||||
|
|
||||||
|
printk_info("done.\n");
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
unsigned char irq[4];
|
||||||
|
irq[0] = 0;
|
||||||
|
irq[1] = 0;
|
||||||
|
irq[2] = 0;
|
||||||
|
irq[3] = 0;
|
||||||
|
|
||||||
|
/* Bus, device, slots IRQs for {A,B,C,D}. */
|
||||||
|
|
||||||
|
irq[0] = 10; /* SMBus */ /* test me */
|
||||||
|
pci_assign_irqs(bus_ck804[0], 1, irq);
|
||||||
|
|
||||||
|
irq[0] = 10; /* USB */
|
||||||
|
irq[1] = 10;
|
||||||
|
pci_assign_irqs(bus_ck804[0], 2, irq);
|
||||||
|
|
||||||
|
irq[0] = 10; /* AC97 */
|
||||||
|
irq[1] = 0;
|
||||||
|
pci_assign_irqs(bus_ck804[0], 4, irq);
|
||||||
|
|
||||||
|
irq[0] = 11; /* SATA */
|
||||||
|
pci_assign_irqs(bus_ck804[0], 7, irq);
|
||||||
|
|
||||||
|
irq[0] = 5; /* SATA */
|
||||||
|
pci_assign_irqs(bus_ck804[0], 8, irq);
|
||||||
|
|
||||||
|
irq[0] = 10; /* Ethernet */
|
||||||
|
pci_assign_irqs(bus_ck804[0], 10, irq);
|
||||||
|
|
||||||
|
|
||||||
|
/* physical slots */
|
||||||
|
|
||||||
|
irq[0] = 5; /* PCI E1 - x1 */
|
||||||
|
pci_assign_irqs(bus_ck804[2], 0, irq);
|
||||||
|
|
||||||
|
irq[0] = 11; /* PCI E2 - x16 */
|
||||||
|
pci_assign_irqs(bus_ck804[3], 0, irq);
|
||||||
|
|
||||||
|
/* AGP-on-PCI "AGR" ignored */
|
||||||
|
|
||||||
|
irq[0] = 10; /* PCI1 */
|
||||||
|
irq[1] = 11;
|
||||||
|
irq[2] = 5;
|
||||||
|
irq[3] = 0;
|
||||||
|
pci_assign_irqs(bus_ck804[1], 7, irq);
|
||||||
|
|
||||||
|
irq[0] = 11; /* PCI2 */
|
||||||
|
irq[1] = 10;
|
||||||
|
irq[2] = 5;
|
||||||
|
irq[3] = 0;
|
||||||
|
pci_assign_irqs(bus_ck804[1], 8, irq);
|
||||||
|
|
||||||
|
irq[0] = 5; /* PCI3 */
|
||||||
|
irq[1] = 10;
|
||||||
|
irq[2] = 11;
|
||||||
|
irq[3] = 0;
|
||||||
|
pci_assign_irqs(bus_ck804[1], 9, irq);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return (unsigned long)pirq_info;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,28 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
#if CONFIG_CHIP_NAME == 1
|
||||||
|
struct chip_operations mainboard_msi_ms7135_ops = {
|
||||||
|
CHIP_NAME("MSI MS7135 Mainboard")
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,221 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007 AMD
|
||||||
|
* (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
|
||||||
|
* Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
* (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
* Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <arch/smp/mpspec.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <string.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
#include <cpu/amd/amdk8_sysconf.h>
|
||||||
|
|
||||||
|
extern unsigned char bus_isa;
|
||||||
|
extern unsigned char bus_ck804[6];
|
||||||
|
extern unsigned apicid_ck804;
|
||||||
|
|
||||||
|
extern unsigned bus_type[256];
|
||||||
|
|
||||||
|
extern void get_bus_conf(void);
|
||||||
|
|
||||||
|
void *smp_write_config_table(void *v)
|
||||||
|
{
|
||||||
|
static const char sig[4] = "PCMP";
|
||||||
|
static const char oem[8] = "MSI ";
|
||||||
|
static const char productid[12] = "MS7135 ";
|
||||||
|
struct mp_config_table *mc;
|
||||||
|
unsigned sbdn;
|
||||||
|
|
||||||
|
int bus_num;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
||||||
|
memset(mc, 0, sizeof(*mc));
|
||||||
|
|
||||||
|
memcpy(mc->mpc_signature, sig, sizeof(sig));
|
||||||
|
mc->mpc_length = sizeof(*mc); /* initially just the header */
|
||||||
|
mc->mpc_spec = 0x04;
|
||||||
|
mc->mpc_checksum = 0; /* not yet computed */
|
||||||
|
memcpy(mc->mpc_oem, oem, sizeof(oem));
|
||||||
|
memcpy(mc->mpc_productid, productid, sizeof(productid));
|
||||||
|
mc->mpc_oemptr = 0;
|
||||||
|
mc->mpc_oemsize = 0;
|
||||||
|
mc->mpc_entry_count = 0; /* No entries yet... */
|
||||||
|
mc->mpc_lapic = LAPIC_ADDR;
|
||||||
|
mc->mpe_length = 0;
|
||||||
|
mc->mpe_checksum = 0;
|
||||||
|
mc->reserved = 0;
|
||||||
|
|
||||||
|
smp_write_processors(mc);
|
||||||
|
|
||||||
|
get_bus_conf();
|
||||||
|
sbdn = sysconf.sbdn;
|
||||||
|
|
||||||
|
/* Bus: Bus ID Type*/
|
||||||
|
/* define numbers for pci and isa bus */
|
||||||
|
for (bus_num = 0; bus_num < 256; bus_num++) {
|
||||||
|
if (bus_type[bus_num])
|
||||||
|
smp_write_bus(mc, bus_num, "PCI ");
|
||||||
|
}
|
||||||
|
smp_write_bus(mc, bus_isa, "ISA ");
|
||||||
|
|
||||||
|
|
||||||
|
/* I/O APICs: APIC ID Version State Address*/
|
||||||
|
{
|
||||||
|
device_t dev;
|
||||||
|
struct resource *res;
|
||||||
|
uint32_t dword;
|
||||||
|
|
||||||
|
dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0));
|
||||||
|
if (dev) {
|
||||||
|
res = find_resource(dev, PCI_BASE_ADDRESS_1);
|
||||||
|
if (res) {
|
||||||
|
smp_write_ioapic(mc, apicid_ck804, 0x11,
|
||||||
|
res->base);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initialize interrupt mapping */
|
||||||
|
|
||||||
|
/* copied from stock bios */
|
||||||
|
/*0x01800500,0x1800d509,0x00520d08*/
|
||||||
|
|
||||||
|
/* if this register is what i think it is ... */
|
||||||
|
dword = 0x08d0d218;
|
||||||
|
pci_write_config32(dev, 0x7c, dword);
|
||||||
|
|
||||||
|
dword = 0x8d001509;
|
||||||
|
pci_write_config32(dev, 0x80, dword);
|
||||||
|
|
||||||
|
dword = 0x00010271;
|
||||||
|
pci_write_config32(dev, 0x84, dword);
|
||||||
|
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Now, assemble the table. */
|
||||||
|
|
||||||
|
smp_write_intsrc(mc, mp_ExtINT,
|
||||||
|
MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH,
|
||||||
|
bus_isa, 0x0, apicid_ck804, 0x0);
|
||||||
|
|
||||||
|
#define ISA_INT(intr, pin) \
|
||||||
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, \
|
||||||
|
bus_isa, (intr), apicid_ck804, (pin))
|
||||||
|
|
||||||
|
ISA_INT(1, 1);
|
||||||
|
ISA_INT(0, 2);
|
||||||
|
ISA_INT(3, 3);
|
||||||
|
ISA_INT(4, 4);
|
||||||
|
|
||||||
|
ISA_INT(6, 6);
|
||||||
|
ISA_INT(7, 7);
|
||||||
|
ISA_INT(8, 8);
|
||||||
|
ISA_INT(9, 9);
|
||||||
|
|
||||||
|
ISA_INT(0xc, 0xc);
|
||||||
|
ISA_INT(0xd, 0xd);
|
||||||
|
ISA_INT(0xe, 0xe);
|
||||||
|
ISA_INT(0xf, 0xf);
|
||||||
|
|
||||||
|
#define PCI_INT(bus, dev, fn, pin) \
|
||||||
|
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \
|
||||||
|
bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin))
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
// Onboard ck804 smbus
|
||||||
|
PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */
|
||||||
|
|
||||||
|
#endif
|
||||||
|
// Onboard ck804 USB
|
||||||
|
PCI_INT(0, sbdn+2, 0, 23);
|
||||||
|
PCI_INT(0, sbdn+2, 1, 23);
|
||||||
|
|
||||||
|
// Onboard ck804 AC-97
|
||||||
|
PCI_INT(0, sbdn+4, 0, 23);
|
||||||
|
|
||||||
|
// Onboard ck804 SATA 0
|
||||||
|
PCI_INT(0, sbdn+7, 0, 20);
|
||||||
|
|
||||||
|
// Onboard ck804 SATA 1
|
||||||
|
PCI_INT(0, sbdn+8, 0, 21);
|
||||||
|
|
||||||
|
// Onboard ck804 NIC
|
||||||
|
PCI_INT(0, sbdn+10, 0, 22);
|
||||||
|
|
||||||
|
|
||||||
|
/* legacy PCI */
|
||||||
|
PCI_INT(1, 7, 0, 17);
|
||||||
|
PCI_INT(1, 7, 1, 18);
|
||||||
|
PCI_INT(1, 7, 2, 19);
|
||||||
|
PCI_INT(1, 7, 3, 16);
|
||||||
|
|
||||||
|
PCI_INT(1, 8, 0, 18);
|
||||||
|
PCI_INT(1, 8, 1, 19);
|
||||||
|
PCI_INT(1, 8, 2, 16);
|
||||||
|
PCI_INT(1, 8, 3, 17);
|
||||||
|
|
||||||
|
PCI_INT(1, 9, 0, 19);
|
||||||
|
PCI_INT(1, 9, 1, 16);
|
||||||
|
PCI_INT(1, 9, 2, 17);
|
||||||
|
PCI_INT(1, 9, 3, 18);
|
||||||
|
|
||||||
|
|
||||||
|
/* PCI-E x1 port */
|
||||||
|
PCI_INT(2, 0, 0, 19);
|
||||||
|
/* XXX guesses */
|
||||||
|
PCI_INT(2, 0, 1, 16);
|
||||||
|
PCI_INT(2, 9, 2, 17);
|
||||||
|
PCI_INT(2, 9, 3, 18);
|
||||||
|
|
||||||
|
/* PCI-E x16 port */ /* XXX fix me ? */
|
||||||
|
PCI_INT(3, 0, 0, 18);
|
||||||
|
/* XXX guesses */
|
||||||
|
PCI_INT(3, 0, 1, 19);
|
||||||
|
PCI_INT(3, 0, 2, 16);
|
||||||
|
PCI_INT(3, 0, 3, 17);
|
||||||
|
|
||||||
|
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
|
||||||
|
smp_write_lintsrc(mc, mp_ExtINT,
|
||||||
|
MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
|
||||||
|
bus_ck804[0], 0x0, MP_APIC_ALL, 0x0);
|
||||||
|
smp_write_lintsrc(mc, mp_NMI,
|
||||||
|
MP_IRQ_TRIGGER_DEFAULT | MP_IRQ_POLARITY_DEFAULT,
|
||||||
|
bus_ck804[0], 0x0, MP_APIC_ALL, 0x1);
|
||||||
|
|
||||||
|
/* There is no extension information... */
|
||||||
|
|
||||||
|
/* Compute the checksums */
|
||||||
|
mc->mpe_checksum =
|
||||||
|
smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
|
||||||
|
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
|
||||||
|
printk_debug("Wrote the mp table end at: %p - %p\n",
|
||||||
|
mc, smp_next_mpe_entry(mc));
|
||||||
|
return smp_next_mpe_entry(mc);
|
||||||
|
}
|
||||||
|
|
||||||
|
unsigned long write_smp_table(unsigned long addr)
|
||||||
|
{
|
||||||
|
void *v;
|
||||||
|
v = smp_write_floating_table(addr);
|
||||||
|
return (unsigned long)smp_write_config_table(v);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,61 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de>
|
||||||
|
## (Thanks to LSRA University of Mannheim for their support)
|
||||||
|
## Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program; if not, write to the Free Software
|
||||||
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
##
|
||||||
|
|
||||||
|
target ms7135
|
||||||
|
mainboard msi/ms7135
|
||||||
|
|
||||||
|
option DEFAULT_CONSOLE_LOGLEVEL=8
|
||||||
|
option MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||||
|
|
||||||
|
option HAVE_PIRQ_TABLE=1
|
||||||
|
option CONFIG_CONSOLE_VGA=1
|
||||||
|
option CONFIG_PCI_ROM_RUN=1
|
||||||
|
|
||||||
|
|
||||||
|
romimage "normal"
|
||||||
|
option USE_FAILOVER_IMAGE=0
|
||||||
|
option USE_FALLBACK_IMAGE=0
|
||||||
|
option ROM_IMAGE_SIZE=0x20000
|
||||||
|
option XIP_ROM_SIZE=0x20000
|
||||||
|
option COREBOOT_EXTRA_VERSION="_Normal"
|
||||||
|
payload /tmp/payload.elf
|
||||||
|
end
|
||||||
|
|
||||||
|
romimage "fallback"
|
||||||
|
option USE_FAILOVER_IMAGE=0
|
||||||
|
option USE_FALLBACK_IMAGE=1
|
||||||
|
option ROM_IMAGE_SIZE=0x20000
|
||||||
|
option XIP_ROM_SIZE=0x20000
|
||||||
|
option COREBOOT_EXTRA_VERSION="_Fallback"
|
||||||
|
payload /tmp/payload.elf
|
||||||
|
end
|
||||||
|
|
||||||
|
romimage "failover"
|
||||||
|
option USE_FAILOVER_IMAGE=1
|
||||||
|
option USE_FALLBACK_IMAGE=0
|
||||||
|
option ROM_IMAGE_SIZE=FAILOVER_SIZE
|
||||||
|
option XIP_ROM_SIZE=FAILOVER_SIZE
|
||||||
|
option COREBOOT_EXTRA_VERSION="_Failover"
|
||||||
|
end
|
||||||
|
|
||||||
|
buildrom ./coreboot.rom ROM_SIZE "normal" "fallback" "failover"
|
||||||
|
#buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
|
||||||
Loading…
Reference in New Issue