mb/google/brya/var/anahera: Update gpio and devicetree
Based on latest shcematic to update the device tree and gpio. BUG=b:197850509 TEST=FW_NAME=anahera emerge-brya coreboot Change-Id: I0a999de479c7b2e4776a57e1e56b1568450ec31a Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Wisley Chen
Patrick Georgi
parent
b1fb8cebf8
commit
911f327398
|
|
@ -59,3 +59,6 @@ config BOARD_GOOGLE_FELWINTER
|
|||
config BOARD_GOOGLE_ANAHERA
|
||||
bool "-> Anahera"
|
||||
select BOARD_GOOGLE_BASEBOARD_BRYA
|
||||
select DRIVERS_GENESYSLOGIC_GL9763E
|
||||
select DRIVERS_GFX_GENERIC
|
||||
select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
|
||||
|
|
|
|||
|
|
@ -0,0 +1,6 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
bootblock-y += gpio.c
|
||||
|
||||
ramstage-y += gpio.c
|
||||
|
||||
ramstage-$(CONFIG_FW_CONFIG) += fw_config.c
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <bootstate.h>
|
||||
#include <console/console.h>
|
||||
#include <fw_config.h>
|
||||
#include <gpio.h>
|
||||
|
||||
static const struct pad_config dmic_enable_pads[] = {
|
||||
PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), /* DMIC_CLK0 */
|
||||
PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), /* DMIC_DATA0 */
|
||||
|
||||
};
|
||||
|
||||
static const struct pad_config dmic_disable_pads[] = {
|
||||
PAD_NC(GPP_R4, NONE),
|
||||
PAD_NC(GPP_R5, NONE),
|
||||
};
|
||||
|
||||
static const struct pad_config i2s_enable_pads[] = {
|
||||
PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), /* I2S_HP_SCLK */
|
||||
PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), /* I2S_HP_SFRM */
|
||||
PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), /* I2S_PCH_TX_HP_RX_STRAP */
|
||||
PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), /* I2S_PCH_RX_HP_TX */
|
||||
PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), /* I2S_SPKR_SCLK */
|
||||
PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), /* I2S_SPKR_SFRM */
|
||||
PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), /* I2S_PCH_TX_SPKR_RX */
|
||||
PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), /* I2S_PCH_RX_SPKR_TX */
|
||||
};
|
||||
|
||||
static const struct pad_config i2s_disable_pads[] = {
|
||||
PAD_NC(GPP_R0, NONE),
|
||||
PAD_NC(GPP_R1, NONE),
|
||||
PAD_NC(GPP_R2, NONE),
|
||||
PAD_NC(GPP_R3, NONE),
|
||||
PAD_NC(GPP_S0, NONE),
|
||||
PAD_NC(GPP_S1, NONE),
|
||||
PAD_NC(GPP_S2, NONE),
|
||||
PAD_NC(GPP_S3, NONE),
|
||||
};
|
||||
|
||||
static void fw_config_handle(void *unused)
|
||||
{
|
||||
if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) {
|
||||
printk(BIOS_INFO, "Disable audio related GPIO pins.\n");
|
||||
gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads));
|
||||
gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads));
|
||||
return;
|
||||
}
|
||||
|
||||
if (fw_config_probe(FW_CONFIG(AUDIO, MAX98360_ALC5682I_I2S)) ||
|
||||
fw_config_probe(FW_CONFIG(AUDIO, MAX98360_ALC5682IVS_I2S))) {
|
||||
printk(BIOS_INFO, "Configure audio over I2S with MAX98390 ALC5682I.\n");
|
||||
gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
|
||||
gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads));
|
||||
}
|
||||
}
|
||||
BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);
|
||||
|
|
@ -0,0 +1,141 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <commonlib/helpers.h>
|
||||
#include <soc/gpio.h>
|
||||
#include <vendorcode/google/chromeos/chromeos.h>
|
||||
|
||||
/* Pad configuration in ramstage */
|
||||
static const struct pad_config override_gpio_table[] = {
|
||||
/* A7 : SRCCLK_OE7# ==> NC */
|
||||
PAD_NC(GPP_A7, NONE),
|
||||
/* A17 : DISP_MISCC ==> NC */
|
||||
PAD_NC(GPP_A17, NONE),
|
||||
/* A19 : DDSP_HPD1 ==> NC */
|
||||
PAD_NC(GPP_A19, NONE),
|
||||
/* A20 : DDSP_HPD2 ==> NC */
|
||||
PAD_NC(GPP_A20, NONE),
|
||||
/* A21 : DDPC_CTRCLK ==> NC */
|
||||
PAD_NC(GPP_A21, NONE),
|
||||
/* A22 : DDPC_CTRLDATA ==> NC */
|
||||
PAD_NC(GPP_A22, NONE),
|
||||
|
||||
/* B3 : PROC_GP2 ==> eMMC_PERST_L */
|
||||
PAD_CFG_GPO(GPP_B3, 1, DEEP),
|
||||
/* B5 : ISH_I2C0_SDA ==> NC */
|
||||
PAD_NC(GPP_B5, NONE),
|
||||
/* B6 : ISH_I2C0_SCL ==> NC */
|
||||
PAD_NC(GPP_B6, NONE),
|
||||
/* B15 : TIME_SYNC0 ==> NC */
|
||||
PAD_NC(GPP_B15, NONE),
|
||||
|
||||
/* C3 : SML0CLK ==> NC */
|
||||
PAD_NC(GPP_C3, NONE),
|
||||
/* C4 : SML0DATA ==> NC */
|
||||
PAD_NC(GPP_C4, NONE),
|
||||
|
||||
/* D3 : ISH_GP3 ==> NC */
|
||||
PAD_NC(GPP_D3, NONE),
|
||||
/* D5 : SRCCLKREQ0# ==> NC */
|
||||
PAD_NC(GPP_D5, NONE),
|
||||
/* D13 : ISH_UART0_RXD ==> NC */
|
||||
PAD_NC(GPP_D13, NONE),
|
||||
/* D14 : ISH_UART0_TXD ==> NC */
|
||||
PAD_NC(GPP_D14, NONE),
|
||||
/* D15 : ISH_UART0_RTS# ==> EN_WCAM_SENR_PWR */
|
||||
PAD_CFG_GPO(GPP_D15, 1, DEEP),
|
||||
/* D16 : ISH_UART0_CTS# ==> NC */
|
||||
PAD_NC(GPP_D16, NONE),
|
||||
/* D17 : UART1_RXD ==> NC */
|
||||
PAD_NC(GPP_D17, NONE),
|
||||
|
||||
/* E0 : SATAXPCIE0 ==> WWAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_E0, 1, PLTRST),
|
||||
/* E3 : PROC_GP0 ==> NC */
|
||||
PAD_NC(GPP_E3, NONE),
|
||||
/* E7 : PROC_GP1 ==> NC */
|
||||
PAD_NC(GPP_E7, NONE),
|
||||
/* E20 : USB_C1_LSX_SOC_TX ==> EN_PP3300_eMMC */
|
||||
PAD_CFG_GPO(GPP_E20, 1, DEEP),
|
||||
/* E23 : DDPA_CTRLDATA ==> NC */
|
||||
PAD_NC(GPP_E23, NONE),
|
||||
|
||||
/* F20 : EXT_PWR_GATE# ==> NC */
|
||||
PAD_NC(GPP_F20, NONE),
|
||||
|
||||
/* H20 : IMGCLKOUT1 ==> NC */
|
||||
PAD_NC(GPP_H20, NONE),
|
||||
/* H21 : IMGCLKOUT2 ==> Privacy screen */
|
||||
PAD_CFG_GPO(GPP_H21, 0, DEEP),
|
||||
/* H22 : IMGCLKOUT3 ==> NC */
|
||||
PAD_NC(GPP_H22, NONE),
|
||||
/* H23 : SRCCLKREQ5# ==> NC */
|
||||
PAD_NC(GPP_H23, NONE),
|
||||
|
||||
/* R6 : I2S_PCH_TX_SPKR_RX ==> NC */
|
||||
PAD_NC(GPP_R6, NONE),
|
||||
/* R7 : I2S_PCH_RX_SPKR_TX ==> NC */
|
||||
PAD_NC(GPP_R7, NONE),
|
||||
|
||||
/* S4 : SNDW2_CLK ==> NC */
|
||||
PAD_NC(GPP_S4, NONE),
|
||||
/* S5 : SNDW2_DATA ==> NC */
|
||||
PAD_NC(GPP_S5, NONE),
|
||||
/* S6 : SNDW3_CLK ==> NC */
|
||||
PAD_NC(GPP_S6, NONE),
|
||||
/* S7 : SNDW3_DATA ==> NC */
|
||||
PAD_NC(GPP_S7, NONE),
|
||||
|
||||
};
|
||||
|
||||
/* Early pad configuration in bootblock */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
|
||||
/* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
|
||||
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
|
||||
/* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
|
||||
PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
|
||||
/*
|
||||
* D1 : ISH_GP1 ==> FP_RST_ODL
|
||||
* FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
|
||||
* To ensure proper power sequencing for the FPMCU device, reset signal is driven low
|
||||
* early on in bootblock, followed by enabling of power. Reset signal is deasserted
|
||||
* later on in ramstage. Since reset signal is asserted in bootblock, it results in
|
||||
* FPMCU not working after a S3 resume. This is a known issue.
|
||||
*/
|
||||
PAD_CFG_GPO(GPP_D1, 0, DEEP),
|
||||
/* D2 : ISH_GP2 ==> EN_FP_PWR */
|
||||
PAD_CFG_GPO(GPP_D2, 1, DEEP),
|
||||
/* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */
|
||||
PAD_CFG_GPO(GPP_D11, 1, DEEP),
|
||||
/* E0 : SATAXPCIE0 ==> WWAN_PERST_L */
|
||||
PAD_CFG_GPO(GPP_E0, 0, DEEP),
|
||||
/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
|
||||
PAD_CFG_GPI(GPP_E13, NONE, DEEP),
|
||||
/* E15 : RSVD_TP ==> PCH_WP_OD */
|
||||
PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
|
||||
/* E16 : RSVD_TP ==> WWAN_RST_L */
|
||||
PAD_CFG_GPO(GPP_E16, 0, DEEP),
|
||||
/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
|
||||
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
|
||||
/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
|
||||
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
|
||||
/* H13 : I2C7_SCL ==> EN_PP3300_SD */
|
||||
PAD_CFG_GPO(GPP_H13, 1, DEEP),
|
||||
/* E20 : USB_C1_LSX_SOC_TX ==> EN_PP3300_MMC */
|
||||
PAD_CFG_GPO(GPP_E20, 1, DEEP),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_gpio_override_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(override_gpio_table);
|
||||
return override_gpio_table;
|
||||
}
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
||||
|
|
@ -1,6 +1,354 @@
|
|||
chip soc/intel/alderlake
|
||||
|
||||
device domain 0 on
|
||||
fw_config
|
||||
field DB_SD 0 1
|
||||
option SD_ABSENT 0
|
||||
option SD_GL9750 1
|
||||
end
|
||||
field KB_BL 2 2
|
||||
option KB_BL_ABSENT 0
|
||||
option KB_BL_PRESENT 1
|
||||
end
|
||||
field AUDIO 3 5
|
||||
option AUDIO_UNKNOWN 0
|
||||
option MAX98360_ALC5682I_I2S 1
|
||||
option MAX98360_ALC5682IVS_I2S 2
|
||||
end
|
||||
field DB_LTE 6 7
|
||||
option LTE_ABSENT 0
|
||||
option LTE_USB 1
|
||||
end
|
||||
field EPS 10 10
|
||||
option PRIVACY_SCREEN_ABSENT 0
|
||||
option PRIVACY_SCREEN 1
|
||||
end
|
||||
end
|
||||
chip soc/intel/alderlake
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| GSPI1 | Fingerprint MCU |
|
||||
#| I2C0 | Audio |
|
||||
#| I2C1 | Touchscreen |
|
||||
#| I2C2 | |
|
||||
#| I2C3 | cr50 TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[2] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[3] = {
|
||||
.early_init = 1,
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
}"
|
||||
register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A MLB Port
|
||||
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Smart Card
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A MLB port
|
||||
device domain 0 on
|
||||
device ref igpu on
|
||||
chip drivers/gfx/generic
|
||||
register "device_count" = "1"
|
||||
register "device[0].name" = ""LCD""
|
||||
# Internal panel on the first port of the graphics chip
|
||||
register "device[0].addr" = "0x80010400"
|
||||
register "device[0].privacy.enabled" = "1"
|
||||
register "device[0].privacy.gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H21)"
|
||||
device generic 0 on
|
||||
probe EPS PRIVACY_SCREEN
|
||||
end
|
||||
end
|
||||
end # Integrated Graphics Device
|
||||
device ref dtt on
|
||||
chip drivers/intel/dptf
|
||||
## sensor information
|
||||
register "options.tsr[0].desc" = ""DRAM""
|
||||
register "options.tsr[1].desc" = ""Charger""
|
||||
# TODO: below values are initial reference values only
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
|
||||
[2] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_1, 75, 5000),
|
||||
}"
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||
}"
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 3000,
|
||||
.max_power = 15000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 200,
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 55000,
|
||||
.max_power = 55000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 1000,
|
||||
}
|
||||
}"
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 1700 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref cnvi_wifi on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_PME_B0"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp6 off end
|
||||
device ref pcie_rp7 on
|
||||
# Enable PCIE eMMC bridge 7 using clk 6
|
||||
register "pch_pcie_rp[PCH_RP(7)]" = "{
|
||||
.clk_src = 6,
|
||||
.clk_req = 2,
|
||||
.flags = PCIE_RP_HOTPLUG | PCIE_RP_AER,
|
||||
}"
|
||||
end #PCIE7 EMMC
|
||||
device ref tcss_dma0 on
|
||||
chip drivers/intel/usb4/retimer
|
||||
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||
use tcss_usb3_port1 as dfp[0].typec_port
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref tcss_dma1 on
|
||||
chip drivers/intel/usb4/retimer
|
||||
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||
use tcss_usb3_port3 as dfp[0].typec_port
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp8 on
|
||||
chip soc/intel/common/block/pcie/rtd3
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
|
||||
register "srcclk_pin" = "3"
|
||||
device generic 0 on end
|
||||
end
|
||||
end #PCIE8 SD card
|
||||
device ref i2c0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on
|
||||
probe AUDIO MAX98360_ALC5682I_I2S
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RTL5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on
|
||||
probe AUDIO MAX98360_ALC5682IVS_I2S
|
||||
end
|
||||
end
|
||||
end #I2C0
|
||||
device ref i2c1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0001""
|
||||
register "desc" = ""ELAN Touchscreen""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "probed" = "1"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "reset_delay_ms" = "100"
|
||||
register "reset_off_delay_ms" = "5"
|
||||
register "enable_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "enable_delay_ms" = "10"
|
||||
register "enable_off_delay_ms" = "1"
|
||||
register "stop_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||
register "has_power_resource" = "1"
|
||||
device i2c 10 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""GTCH7503""
|
||||
register "generic.desc" = ""G2TOUCH Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "generic.reset_delay_ms" = "50"
|
||||
register "generic.enable_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "generic.enable_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 40 on end
|
||||
end
|
||||
end
|
||||
device ref i2c5 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "wake" = "GPE0_DW2_14"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end
|
||||
device ref hda on
|
||||
chip drivers/generic/max98357a
|
||||
register "hid" = ""MX98357A""
|
||||
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
|
||||
register "sdmode_delay" = "5"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref gspi1 on
|
||||
chip drivers/spi/acpi
|
||||
register "name" = ""CRFP""
|
||||
register "hid" = "ACPI_DT_NAMESPACE_HID"
|
||||
register "uid" = "1"
|
||||
register "compat_string" = ""google,cros-ec-spi""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
|
||||
register "wake" = "GPE0_DW2_15"
|
||||
device spi 0 on end
|
||||
end # FPMCU
|
||||
end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn0 as mux_conn[0]
|
||||
use conn1 as mux_conn[1]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
register "usb2_port_number" = "1"
|
||||
register "usb3_port_number" = "1"
|
||||
device generic 0 alias conn0 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
register "usb2_port_number" = "3"
|
||||
register "usb3_port_number" = "3"
|
||||
device generic 1 alias conn1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref tcss_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||
device ref tcss_usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C2 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||
device ref tcss_usb3_port3 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||
device ref usb2_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(4, 2)"
|
||||
device ref usb2_port2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C2 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||
device ref usb2_port3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 WWAN""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port4 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port (DB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||
device ref usb2_port9 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port10 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(4, 2)"
|
||||
device ref usb3_port3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 WWAN""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb3_port4 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue