diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc index 197145aee4..f2a9d8d4f5 100644 --- a/src/soc/amd/stoneyridge/Makefile.inc +++ b/src/soc/amd/stoneyridge/Makefile.inc @@ -91,12 +91,14 @@ ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi_util.c ramstage-$(CONFIG_STONEYRIDGE_UART) += uart.c ramstage-y += usb.c ramstage-y += tsc_freq.c +ramstage-$(CONFIG_SPI_FLASH) += spi.c smm-y += smihandler.c smm-y += smi_util.c smm-y += sb_util.c smm-y += tsc_freq.c smm-$(CONFIG_DEBUG_SMI) += uart.c +smm-$(CONFIG_SPI_FLASH) += spi.c CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge CPPFLAGS_common += -I$(src)/soc/amd/stoneyridge/include diff --git a/src/soc/amd/stoneyridge/include/soc/southbridge.h b/src/soc/amd/stoneyridge/include/soc/southbridge.h index c79457b4c7..238feba53a 100644 --- a/src/soc/amd/stoneyridge/include/soc/southbridge.h +++ b/src/soc/amd/stoneyridge/include/soc/southbridge.h @@ -197,7 +197,11 @@ #define LPC_HOST_CONTROL 0xbb #define SPI_FROM_HOST_PREFETCH_EN BIT(0) +/* SPI Controller */ +#define SPI_FIFO_DEPTH 8 + #define SPI_CNTRL0 0x00 +#define SPI_BUSY BIT(31) #define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18)) /* Nominal is 16.7MHz on older devices, 33MHz on newer */ #define SPI_READ_MODE_NOM 0x00000000 @@ -207,14 +211,34 @@ #define SPI_READ_MODE_QUAD144 (BIT(30) | BIT(18)) #define SPI_READ_MODE_NORMAL66 (BIT(30) | BIT(29) ) #define SPI_READ_MODE_FAST (BIT(30) | BIT(29) | BIT(18)) +#define SPI_FIFO_PTR_CLR BIT(20) #define SPI_ARB_ENABLE BIT(19) - +#define EXEC_OPCODE BIT(16) +#define SPI_REG_CNTRL01 0x01 +#define SPI_REG_CNTRL02 0x02 +#define SPI_FIFO_PTR_CLR02 (SPI_FIFO_PTR_CLR >> 16) #define SPI_CNTRL1 0x0c +#define SPI_FIFO_PTR_MASK (BIT(8) | BIT(9) | BIT(10)) +#define SPI_CNTRL11 0x0d +#define SPI_FIFO_PTR_MASK11 (SPI_FIFO_PTR_MASK >> 8) + +#define SPI100_SPEED_CONFIG 0x22 /* Use SPI_SPEED_16M-SPI_SPEED_66M below for the southbridge */ #define SPI_CNTRL1_SPEED_MASK (BIT(15) | BIT(14) | BIT(13) | BIT(12)) #define SPI_NORM_SPEED_SH 12 #define SPI_FAST_SPEED_SH 8 +#define SPI_EXT_INDEX 0x1e +#define SPI_EXT_DATA 0x1f +#define SPI_DDR_CMD 0x0 +#define SPI_QDR_CMD 0x1 +#define SPI_DPR_CMD 0x2 +#define SPI_QPR_CMD 0x3 +#define SPI_MODE_BYTE 0x4 +#define SPI_TX_BYTE_COUNT 0x5 +#define SPI_RX_BYTE_COUNT 0x6 +#define SPI_SPI_DATA_FIFO_PTR 0x7 + #define SPI100_ENABLE 0x20 #define SPI_USE_SPI100 BIT(0) diff --git a/src/soc/amd/stoneyridge/spi.c b/src/soc/amd/stoneyridge/spi.c new file mode 100644 index 0000000000..84b56dfa3d --- /dev/null +++ b/src/soc/amd/stoneyridge/spi.c @@ -0,0 +1,207 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2012 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static uintptr_t spibar CAR_GLOBAL; + +static uintptr_t get_spibase(void) +{ + return *(uintptr_t *)car_get_var_ptr(&spibar); +} + +static void set_spibar(uintptr_t base) +{ + *(uintptr_t *)car_get_var_ptr(&spibar) = base; +} + +static inline uint8_t spi_read8(uint8_t reg) +{ + return read8((void *)(get_spibase() + reg)); +} + +static inline uint32_t spi_read32(uint8_t reg) +{ + return read32((void *)(get_spibase() + reg)); +} + +static inline void spi_write8(uint8_t reg, uint8_t val) +{ + write8((void *)(get_spibase() + reg), val); +} + +static inline void spi_write32(uint8_t reg, uint32_t val) +{ + write32((void *)(get_spibase() + reg), val); +} + +static int reset_internal_fifo_pointer(void) +{ + uint8_t reg; + const uint32_t timeout_ms = 500; + struct stopwatch sw; + + stopwatch_init_msecs_expire(&sw, timeout_ms); + + do { + reg = spi_read8(SPI_REG_CNTRL02); + reg |= SPI_FIFO_PTR_CLR02; + spi_write8(SPI_REG_CNTRL02, reg); + /* wait for ptr=0 */ + if (!(spi_read8(SPI_CNTRL11) & (SPI_FIFO_PTR_MASK11))) + return 0; + } while (!stopwatch_expired(&sw)); + + printk(BIOS_DEBUG, "FCH SPI Error: FIFO reset failed\n"); + return -1; +} + +static int execute_command(void) +{ + uint32_t reg; + const uint32_t timeout_ms = 500; + struct stopwatch sw; + + stopwatch_init_msecs_expire(&sw, timeout_ms); + + reg = spi_read32(SPI_CNTRL0); + reg |= EXEC_OPCODE; + spi_write32(SPI_CNTRL0, reg); + + do { + if (!(spi_read32(SPI_CNTRL0) & (EXEC_OPCODE | SPI_BUSY))) + return 0; + } while (!stopwatch_expired(&sw)); + + printk(BIOS_DEBUG, "FCH SPI Error: Timeout executing command\n"); + return -1; +} + +void spi_init(void) +{ + uintptr_t bar; + + bar = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER); + bar = ALIGN_DOWN(bar, 64); + set_spibar(bar); +} + +static int do_command(uint8_t cmd, const void *dout, + size_t bytesout, void *din, size_t *bytesin) +{ + size_t count; + size_t max_in = MIN(*bytesin, SPI_FIFO_DEPTH); + + spi_write8(SPI_EXT_INDEX, SPI_TX_BYTE_COUNT); + spi_write8(SPI_EXT_DATA, bytesout); + spi_write8(SPI_EXT_INDEX, SPI_RX_BYTE_COUNT); + spi_write8(SPI_EXT_DATA, max_in); + spi_write8(SPI_CNTRL0, cmd); + + if (reset_internal_fifo_pointer()) + return -1; + for (count = 0; count < bytesout; count++, dout++) + spi_write8(SPI_CNTRL1, *(uint8_t *)dout); + + if (execute_command()) + return -1; + + if (reset_internal_fifo_pointer()) + return -1; + for (count = 0; count < bytesout; count++) + spi_read8(SPI_CNTRL1); /* skip the bytes we sent */ + + for (count = 0; count < max_in; count++, din++) + *(uint8_t *)din = spi_read8(SPI_CNTRL1); + + *bytesin -= max_in; + return 0; +} + +static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, + size_t bytesout, void *din, size_t bytesin) +{ + uint8_t cmd; + + /* First byte is cmd which cannot be sent through FIFO */ + cmd = *(uint8_t *)dout++; + bytesout--; + + /* + * Check if this is a write command attempting to transfer more bytes + * than the controller can handle. Iterations for writes are not + * supported here because each SPI write command needs to be preceded + * and followed by other SPI commands, and this sequence is controlled + * by the SPI chip driver. + */ + if (bytesout > SPI_FIFO_DEPTH) { + printk(BIOS_DEBUG, "FCH SPI: Too much to write. Does your SPI" + " chip driver use spi_crop_chunk()?\n"); + return -1; + } + + do { + if (do_command(cmd, dout, bytesout, din, &bytesin)) + return -1; + } while (bytesin); + + return 0; +} + +int chipset_volatile_group_begin(const struct spi_flash *flash) +{ + if (IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)) + imc_sleep(); + return 0; +} + +int chipset_volatile_group_end(const struct spi_flash *flash) +{ + if (IS_ENABLED(CONFIG_STONEYRIDGE_IMC_FWM)) + imc_wakeup(); + return 0; +} + +static const struct spi_ctrlr spi_ctrlr = { + .xfer = spi_ctrlr_xfer, + .xfer_vector = spi_xfer_two_vectors, + .max_xfer_size = SPI_FIFO_DEPTH, + .deduct_cmd_len = true, +}; + +const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = { + { + .ctrlr = &spi_ctrlr, + .bus_start = 0, + .bus_end = 0, + }, +}; + +const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);