In the process of trying to debug some HT sync problems I added lots of

debug code to src/northbridge/amd/amdk8/incoherent_ht.c.
However, printk is not available for all boards at that stage.

I have changed the following boards:
agami/aruma
arima/hdama
asus/a8n_e
broadcom/blast
ibm/e325
ibm/e326
iwill/dk8s2
iwill/dk8x
msi/ms7135
newisys/khepri
sunw/ultra40
tyan/s2850
tyan/s2875
tyan/s2880
tyan/s2881
tyan/s2882
tyan/s2885
tyan/s2891
tyan/s2892
tyan/s2895
tyan/s4880
tyan/s4882

abuild works fine for all of them.
agami/aruma needs a Config-abuild.lb which doesn't have fallback and
normal due to size problems.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Marc Jones <marcj303@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3829 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/agami/aruma/Options.lb

@@ -179,7 +179,7 @@ default DCACHE_RAM_BASE=0xcc000
 default DCACHE_RAM_SIZE=0x4000
 default CONFIG_USE_INIT=0
 #default CONFIG_USE_INIT=1
-#default CONFIG_USE_PRINTK_IN_CAR=1
+default CONFIG_USE_PRINTK_IN_CAR=1
 
 ##
 ## Build code to setup a generic IOAPIC

src/mainboard/arima/hdama/Options.lb

@@ -56,6 +56,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -191,6 +192,8 @@ default HOSTCC="gcc"
 ##
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/asus/a8n_e/Options.lb

@@ -97,6 +97,7 @@ uses HT_CHAIN_END_UNITID_BASE
 uses SB_HT_CHAIN_ON_BUS0
 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
 uses CONFIG_LB_MEM_TOPK
+uses CONFIG_USE_PRINTK_IN_CAR
 
 default ROM_SIZE = 512 * 1024
 default ROM_IMAGE_SIZE = 64 * 1024
@@ -157,6 +158,7 @@ default CONFIG_ROM_PAYLOAD = 1
 default CC = "$(CROSS_COMPILE)gcc -m32"
 default HOSTCC = "gcc"
 default CONFIG_GDB_STUB = 0
+default CONFIG_USE_PRINTK_IN_CAR=1
 default CONFIG_CONSOLE_SERIAL8250 = 1
 default TTYS0_BAUD = 115200
 default TTYS0_BASE = 0x3f8

src/mainboard/broadcom/blast/Options.lb

@@ -64,6 +64,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
 
@@ -214,6 +215,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/ibm/e325/Options.lb

@@ -49,6 +49,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 
 ###
@@ -170,6 +171,8 @@ default CONFIG_ROM_PAYLOAD = 1
 default CC="$(CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/ibm/e326/Options.lb

@@ -51,6 +51,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 
 ###
@@ -176,6 +177,8 @@ default CONFIG_ROM_PAYLOAD = 1
 default CC="$(CROSS_COMPILE)gcc -m32"
 default HOSTCC="gcc"
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/iwill/dk8s2/Options.lb

@@ -53,6 +53,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ## ROM_SIZE is the size of boot ROM that this board will use.
 default ROM_SIZE=524288
@@ -177,6 +178,8 @@ default CONFIG_ROM_PAYLOAD = 1
 ##
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/iwill/dk8x/Options.lb

@@ -53,6 +53,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ## ROM_SIZE is the size of boot ROM that this board will use.
 default ROM_SIZE=524288
@@ -176,6 +177,8 @@ default CONFIG_ROM_PAYLOAD = 1
 ##
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/msi/ms7135/Options.lb

@@ -87,6 +87,7 @@ uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
 uses DCACHE_RAM_GLOBAL_VAR_SIZE
 uses CONFIG_AP_CODE_IN_CAR
+uses CONFIG_USE_PRINTK_IN_CAR
 uses MEM_TRAIN_SEQ
 uses WAIT_BEFORE_CPUS_INIT
 
@@ -271,6 +272,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/newisys/khepri/Options.lb

@@ -59,6 +59,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -198,6 +199,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/sunw/ultra40/Options.lb

@@ -61,6 +61,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
@@ -231,6 +232,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2850/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -199,6 +200,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2875/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -200,6 +201,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2880/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -199,6 +200,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2881/Options.lb

@@ -65,6 +65,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -216,6 +217,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2882/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 ###
 ### Build options
@@ -199,6 +200,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2885/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
@@ -226,6 +227,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2891/Options.lb

@@ -61,6 +61,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
@@ -233,6 +234,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2892/Options.lb

@@ -61,6 +61,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses HT_CHAIN_UNITID_BASE
 uses HT_CHAIN_END_UNITID_BASE
@@ -221,6 +222,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s2895/Options.lb

@@ -64,6 +64,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses SERIAL_CPU_INIT
 
@@ -243,6 +244,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s4880/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
@@ -208,6 +209,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

src/mainboard/tyan/s4882/Options.lb

@@ -60,6 +60,7 @@ uses USE_DCACHE_RAM
 uses DCACHE_RAM_BASE
 uses DCACHE_RAM_SIZE
 uses CONFIG_USE_INIT
+uses CONFIG_USE_PRINTK_IN_CAR
 
 uses ENABLE_APIC_EXT_ID
 uses APIC_ID_OFFSET
@@ -207,6 +208,8 @@ default HOSTCC="gcc"
 ## 
 default CONFIG_GDB_STUB=0
 
+default CONFIG_USE_PRINTK_IN_CAR=1
+
 ##
 ## The Serial Console
 ##

targets/agami/aruma/Config-abuild.lb

@@ -0,0 +1,26 @@
+# This will make a target directory of ./VENDOR_MAINBOARD
+
+target VENDOR_MAINBOARD
+mainboard VENDOR/MAINBOARD
+
+option CC="CROSSCC"
+option CROSS_COMPILE="CROSS_PREFIX"
+option HOSTCC="CROSS_HOSTCC"
+
+__COMPRESSION__
+
+option DEFAULT_CONSOLE_LOGLEVEL=7
+option MAXIMUM_CONSOLE_LOGLEVEL=7
+
+option ROM_SIZE = (1024*1024)
+option FALLBACK_SIZE = (1024*1024)
+
+romimage "fallback" 
+	option USE_FALLBACK_IMAGE=1
+	option ROM_IMAGE_SIZE=0x16000
+	option XIP_ROM_SIZE=0x20000
+	option COREBOOT_EXTRA_VERSION=".0-fallback"
+	payload __PAYLOAD__
+end
+
+buildrom ./coreboot.rom ROM_SIZE "fallback"