soc/amd/stoneyridge/acpi.c: Create GPIO acpigen procedures

There are some acpigen functionality that have not been implemented. They
are defined as week within acpigen.c, in order to not break the build.
This adds stoneyridge specific versions.

BUG=b:79546790
TEST=Build grunt with added debug code to gpio_lib.asl. Boot to OS,
activate ACPI debug, activate S3 stress test. Interrupt stress test, do a
"cat /var/log/messages" saving the serial output. Examine the serial
output, see added debug code showing action taken. Confirm action by
reading proper register. Debug code removed.

Change-Id: I9062d889f828a3175b89e6f4a3659ebbf90eac68
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/26335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>

src/soc/amd/stoneyridge/acpi.c

@@ -32,6 +32,7 @@
 #include <soc/pci_devs.h>
 #include <soc/southbridge.h>
 #include <soc/nvs.h>
+#include <soc/gpio.h>
 
 unsigned long acpi_fill_madt(unsigned long current)
 {
@@ -303,3 +304,100 @@ void southbridge_inject_dsdt(struct device *device)
 		acpigen_pop_len();
 	}
 }
+
+static void acpigen_soc_get_gpio_in_local5(uintptr_t addr)
+{
+	/*
+	 *   Store (\_SB.GPR2 (addr), Local5)
+	 * \_SB.GPR2 is used to read control byte 2 from control register.
+	 * / It is defined in gpio_lib.asl.
+	 */
+	acpigen_write_store();
+	acpigen_emit_namestring("\\_SB.GPR2");
+	acpigen_write_integer(addr);
+	acpigen_emit_byte(LOCAL5_OP);
+}
+
+static int acpigen_soc_get_gpio_val(unsigned int gpio_num, uint32_t mask)
+{
+	if (gpio_num >= GPIO_TOTAL_PINS) {
+		printk(BIOS_WARNING, "Warning: Pin %d should be smaller than"
+					" %d\n", gpio_num, GPIO_TOTAL_PINS);
+		return -1;
+	}
+	uintptr_t addr = (uintptr_t) gpio_get_address(gpio_num);
+
+	acpigen_soc_get_gpio_in_local5(addr);
+
+	/* If (And (Local5, mask)) */
+	acpigen_write_if_and(LOCAL5_OP, mask);
+
+	/* Store (One, Local0) */
+	acpigen_write_store_ops(ONE_OP, LOCAL0_OP);
+
+	acpigen_pop_len();	/* If */
+
+	/* Else */
+	acpigen_write_else();
+
+	/* Store (Zero, Local0) */
+	acpigen_write_store_ops(ZERO_OP, LOCAL0_OP);
+
+	acpigen_pop_len();	/* Else */
+
+	return 0;
+}
+
+static int acpigen_soc_set_gpio_val(unsigned int gpio_num, uint32_t val)
+{
+	if (gpio_num >= GPIO_TOTAL_PINS) {
+		printk(BIOS_WARNING, "Warning: Pin %d should be smaller than"
+					" %d\n", gpio_num, GPIO_TOTAL_PINS);
+		return -1;
+	}
+	uintptr_t addr = (uintptr_t) gpio_get_address(gpio_num);
+
+	acpigen_soc_get_gpio_in_local5(addr);
+
+	if (val) {
+		/* Or (Local5, GPIO_PIN_OUT, Local5) */
+		acpigen_write_or(LOCAL5_OP, GPIO_PIN_OUT, LOCAL5_OP);
+	} else {
+		/* Not (GPIO_PIN_OUT, Local6) */
+		acpigen_write_not(GPIO_PIN_OUT, LOCAL6_OP);
+
+		/* And (Local5, Local6, Local5) */
+		acpigen_write_and(LOCAL5_OP, LOCAL6_OP, LOCAL5_OP);
+	}
+
+	/*
+	 *   SB.GPW2 (addr, Local5)
+	 * \_SB.GPW2 is used to write control byte in control register
+	 * / byte 2. It is defined in gpio_lib.asl.
+	 */
+	acpigen_emit_namestring("\\_SB.GPW2");
+	acpigen_write_integer(addr);
+	acpigen_emit_byte(LOCAL5_OP);
+
+	return 0;
+}
+
+int acpigen_soc_read_rx_gpio(unsigned int gpio_num)
+{
+	return acpigen_soc_get_gpio_val(gpio_num, GPIO_PIN_IN);
+}
+
+int acpigen_soc_get_tx_gpio(unsigned int gpio_num)
+{
+	return acpigen_soc_get_gpio_val(gpio_num, GPIO_PIN_OUT);
+}
+
+int acpigen_soc_set_tx_gpio(unsigned int gpio_num)
+{
+	return acpigen_soc_set_gpio_val(gpio_num, 1);
+}
+
+int acpigen_soc_clear_tx_gpio(unsigned int gpio_num)
+{
+	return acpigen_soc_set_gpio_val(gpio_num, 0);
+}

src/soc/amd/stoneyridge/gpio.c

@@ -130,7 +130,7 @@ static void get_sci_config_bits(uint32_t flag, uint32_t *edge, uint32_t *level)
 	}
 }
 
-static uintptr_t gpio_get_address(gpio_t gpio_num)
+uintptr_t gpio_get_address(gpio_t gpio_num)
 {
 	uintptr_t gpio_address;
 

src/soc/amd/stoneyridge/include/soc/gpio.h

@@ -36,6 +36,10 @@ struct soc_amd_event {
 	uint8_t event;
 };
 
+#define GPIO_TOTAL_PINS		149
+#define GPIO_PIN_IN		(1 << 0)	/* for byte access */
+#define GPIO_PIN_OUT		(1 << 6)	/* for byte access */
+
 #define GPIO_EDGE_TRIG		(0 << 8)
 #define GPIO_LEVEL_TRIG		(1 << 8)
 #define GPIO_TRIGGER_MASK	(1 << 8)
@@ -555,6 +559,8 @@ enum {
 		.flags = GPIO_FLAG_DEBOUNCE }
 
 typedef uint32_t gpio_t;
+/* Get the address of the control register of a particular pin */
+uintptr_t gpio_get_address(gpio_t gpio_num);
 
 /**
  * @brief program a particular set of GPIO