sb/intel/lynxpoint: Drop invalid SATA registers

Code was copy-pasted from older chips and has no effect on Lynxpoint.

Change-Id: I2c789ba48f175b3c9c9643118fc2209c94f24c3e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
This commit is contained in:
Angel Pons 2020-11-02 12:08:50 +01:00
parent 28ed7878f0
commit 93859e319e
2 changed files with 4 additions and 56 deletions

View File

@ -215,51 +215,11 @@ void mainboard_config_rcba(void);
/* PCI Configuration Space (D31:F2): SATA */
#define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2)
#define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5)
#define INTR_LN 0x3c
#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
#define IDE_DECODE_ENABLE (1 << 15)
#define IDE_SITRE (1 << 14)
#define IDE_ISP_5_CLOCKS (0 << 12)
#define IDE_ISP_4_CLOCKS (1 << 12)
#define IDE_ISP_3_CLOCKS (2 << 12)
#define IDE_RCT_4_CLOCKS (0 << 8)
#define IDE_RCT_3_CLOCKS (1 << 8)
#define IDE_RCT_2_CLOCKS (2 << 8)
#define IDE_RCT_1_CLOCKS (3 << 8)
#define IDE_DTE1 (1 << 7)
#define IDE_PPE1 (1 << 6)
#define IDE_IE1 (1 << 5)
#define IDE_TIME1 (1 << 4)
#define IDE_DTE0 (1 << 3)
#define IDE_PPE0 (1 << 2)
#define IDE_IE0 (1 << 1)
#define IDE_TIME0 (1 << 0)
#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */
#define IDE_SSDE1 (1 << 3)
#define IDE_SSDE0 (1 << 2)
#define IDE_PSDE1 (1 << 1)
#define IDE_PSDE0 (1 << 0)
#define IDE_SDMA_TIM 0x4a
#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */
#define SIG_MODE_SEC_NORMAL (0 << 18)
#define SIG_MODE_SEC_TRISTATE (1 << 18)
#define SIG_MODE_SEC_DRIVELOW (2 << 18)
#define SIG_MODE_PRI_NORMAL (0 << 16)
#define SIG_MODE_PRI_TRISTATE (1 << 16)
#define SIG_MODE_PRI_DRIVELOW (2 << 16)
#define FAST_SCB1 (1 << 15)
#define FAST_SCB0 (1 << 14)
#define FAST_PCB1 (1 << 13)
#define FAST_PCB0 (1 << 12)
#define SCB1 (1 << 3)
#define SCB0 (1 << 2)
#define PCB1 (1 << 1)
#define PCB0 (1 << 0)
#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */
#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */
#define SATA_SP 0xd0 /* Scratchpad */

View File

@ -58,22 +58,10 @@ static void sata_init(struct device *dev)
/* Set Interrupt Line */
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config8(dev, INTR_LN, 0x0a);
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0x0a);
/* Set timings */
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
IDE_PPE0 | IDE_IE0 | IDE_TIME0);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
/* Sync DMA */
pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0);
pci_write_config16(dev, IDE_SDMA_TIM, 0x0001);
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
pci_write_config32(dev, IDE_CONFIG, reg32);
pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE);
pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE);
/* for AHCI, Port Enable is managed in memory mapped space */
pci_update_config16(dev, 0x92, ~0x3f, 0x8000 | config->sata_port_map);