diff --git a/src/mainboard/google/volteer/variants/volteer/overridetree.cb b/src/mainboard/google/volteer/variants/volteer/overridetree.cb
index 54566f711d..c7350cb926 100644
--- a/src/mainboard/google/volteer/variants/volteer/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/volteer/overridetree.cb
@@ -1,5 +1,48 @@
 chip soc/intel/tigerlake
 	register "SaGv" = "SaGv_Disabled"
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| chipset_lockdown  | CHIPSET_LOCKDOWN_COREBOOT |
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| GSPI1             | Fingerprint MCU           |
+	#| I2C0              | Audio                     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | WLAN, SAR0                |
+	#| I2C3              | Camera, SAR1              |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 163,
+				.scl_hcnt = 75,
+				.sda_hold = 36,
+			},
+		},
+	}"
 	device domain 0 on
 		device pci 15.0 on
 			chip drivers/i2c/generic