mb/google/brya/variants/kano: Configure GPIOs according to schematics
Update initial gpio configuration for kano BUG=b:192370253 TEST=FW_NAME=kano emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I4d6099fa8d17bebf798ddf236a68886087e2a95e Reviewed-on: https://review.coreboot.org/c/coreboot/+/56940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
parent
df368d5dfe
commit
93a6c39b86
|
@ -0,0 +1,4 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
bootblock-y += gpio.c
|
||||
|
||||
ramstage-y += gpio.c
|
|
@ -0,0 +1,131 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <commonlib/helpers.h>
|
||||
#include <soc/gpio.h>
|
||||
#include <vendorcode/google/chromeos/chromeos.h>
|
||||
|
||||
/* Pad configuration in ramstage */
|
||||
static const struct pad_config override_gpio_table[] = {
|
||||
/* A6 : ESPI_ALERT1# ==> NC */
|
||||
PAD_NC(GPP_A6, NONE),
|
||||
/* A7 : SRCCLK_OE7# ==> NC */
|
||||
PAD_NC(GPP_A7, NONE),
|
||||
/* A8 : SRCCLKREQ7# ==> NC */
|
||||
PAD_NC(GPP_A8, NONE),
|
||||
/* A12 : SATAXPCIE1 ==> NC */
|
||||
PAD_NC(GPP_A12, NONE),
|
||||
/* A15 : USB_OC2# ==> NC */
|
||||
PAD_NC(GPP_A15, NONE),
|
||||
/* A19 : DDSP_HPD1 ==> NC */
|
||||
PAD_NC(GPP_A19, NONE),
|
||||
/* A20 : DDSP_HPD2 ==> NC */
|
||||
PAD_NC(GPP_A20, NONE),
|
||||
/* A21 : DDPC_CTRCLK ==> NC */
|
||||
PAD_NC(GPP_A21, NONE),
|
||||
/* A22 : DDPC_CTRLDATA ==> NC */
|
||||
PAD_NC(GPP_A22, NONE),
|
||||
|
||||
/* D3 : ISH_GP3 ==> NC */
|
||||
PAD_NC(GPP_D3, NONE),
|
||||
/* D5 : SRCCLKREQ0# ==> NC */
|
||||
PAD_NC(GPP_D5, NONE),
|
||||
/* D7 : SRCCLKREQ2# ==> NC */
|
||||
PAD_NC(GPP_D7, NONE),
|
||||
/* D8 : SRCCLKREQ3# ==> NC */
|
||||
PAD_NC(GPP_D8, NONE),
|
||||
/* D9 : ISH_SPI_CS# ==> NC */
|
||||
PAD_NC(GPP_D9, NONE),
|
||||
/* D18 : UART1_TXD ==> NC */
|
||||
PAD_NC(GPP_D18, NONE),
|
||||
|
||||
/* E0 : SATAXPCIE0 ==> NC */
|
||||
PAD_NC(GPP_E0, NONE),
|
||||
/* E3 : PROC_GP0 ==> SAR1_INT_L */
|
||||
PAD_CFG_GPI_APIC(GPP_E3, NONE, PLTRST, LEVEL, NONE),
|
||||
/* E7 : PROC_GP1 ==> NC */
|
||||
PAD_NC(GPP_E7, NONE),
|
||||
/* E10 : THC0_SPI1_CS# ==> NC */
|
||||
PAD_NC(GPP_E10, NONE),
|
||||
/* E17 : THC0_SPI1_INT# ==> NC */
|
||||
PAD_NC(GPP_E17, NONE),
|
||||
/* E22 : DDPA_CTRLCLK ==> NC */
|
||||
PAD_NC(GPP_E22, NONE),
|
||||
/* E23 : DDPA_CTRLDATA ==> NC */
|
||||
PAD_NC(GPP_E23, NONE),
|
||||
|
||||
/* F6 : CNV_PA_BLANKING ==> NC */
|
||||
PAD_NC(GPP_F6, NONE),
|
||||
/* F20 : EXT_PWR_GATE# ==> NC */
|
||||
PAD_NC(GPP_F20, NONE),
|
||||
/* F21 : EXT_PWR_GATE2# ==> NC */
|
||||
PAD_NC(GPP_F21, NONE),
|
||||
|
||||
/* H8 : I2C4_SDA ==> NC */
|
||||
PAD_NC(GPP_H8, NONE),
|
||||
/* H9 : I2C4_SCL ==> NC */
|
||||
PAD_NC(GPP_H9, NONE),
|
||||
/* H12 : I2C7_SDA ==> NC */
|
||||
PAD_NC(GPP_H12, NONE),
|
||||
/* H13 : I2C7_SCL ==> NC */
|
||||
PAD_NC(GPP_H13, NONE),
|
||||
/* H15 : DDPB_CTRLCLK ==> NC */
|
||||
PAD_NC(GPP_H15, NONE),
|
||||
/* H19 : SRCCLKREQ4# ==> NC */
|
||||
PAD_NC(GPP_H19, NONE),
|
||||
/* H20 : IMGCLKOUT1 ==> NC */
|
||||
PAD_NC(GPP_H20, NONE),
|
||||
/* H21 : IMGCLKOUT2 ==> NC */
|
||||
PAD_NC(GPP_H21, NONE),
|
||||
/* H22 : IMGCLKOUT3 ==> NC */
|
||||
PAD_NC(GPP_H22, NONE),
|
||||
/* H23 : SRCCLKREQ5# ==> NC */
|
||||
PAD_NC(GPP_H23, NONE),
|
||||
|
||||
/* GPD11: LANPHYC ==> NC */
|
||||
PAD_NC(GPD11, NONE),
|
||||
};
|
||||
|
||||
/* Early pad configuration in bootblock */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
|
||||
/* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
|
||||
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
|
||||
/* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
|
||||
PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
|
||||
/*
|
||||
* D1 : ISH_GP1 ==> FP_RST_ODL
|
||||
* FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.
|
||||
* To ensure proper power sequencing for the FPMCU device, reset signal is driven low
|
||||
* early on in bootblock, followed by enabling of power. Reset signal is deasserted
|
||||
* later on in ramstage. Since reset signal is asserted in bootblock, it results in
|
||||
* FPMCU not working after a S3 resume. This is a known issue.
|
||||
*/
|
||||
PAD_CFG_GPO(GPP_D1, 0, DEEP),
|
||||
/* D2 : ISH_GP2 ==> EN_FP_PWR */
|
||||
PAD_CFG_GPO(GPP_D2, 1, DEEP),
|
||||
/* E0 : SATAXPCIE0 ==> NC */
|
||||
PAD_NC(GPP_E0, NONE),
|
||||
/* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */
|
||||
PAD_CFG_GPI(GPP_E13, NONE, DEEP),
|
||||
/* E15 : RSVD_TP ==> PCH_WP_OD */
|
||||
PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP),
|
||||
/* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */
|
||||
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2),
|
||||
/* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */
|
||||
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_gpio_override_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(override_gpio_table);
|
||||
return override_gpio_table;
|
||||
}
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
Loading…
Reference in New Issue