soc/intel/broadwell: Use common INTEL_SB SPI code
Change-Id: Id906733ac3719c8d6835aad52ca87beb81b5771d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
Arthur Heymans
Nico Huber
parent
2abbe46765
commit
95755dd65d
|
|
@ -20,6 +20,7 @@ config CPU_SPECIFIC_OPTIONS
|
||||||
select HAVE_SMI_HANDLER
|
select HAVE_SMI_HANDLER
|
||||||
select SOUTHBRIDGE_INTEL_COMMON_RESET
|
select SOUTHBRIDGE_INTEL_COMMON_RESET
|
||||||
select SOUTHBRIDGE_INTEL_COMMON_RTC
|
select SOUTHBRIDGE_INTEL_COMMON_RTC
|
||||||
|
select SOUTHBRIDGE_INTEL_COMMON_SPI
|
||||||
select HAVE_USBDEBUG
|
select HAVE_USBDEBUG
|
||||||
select IOAPIC
|
select IOAPIC
|
||||||
select REG_SCRIPT
|
select REG_SCRIPT
|
||||||
|
|
|
||||||
|
|
@ -58,11 +58,6 @@ romstage-y += smbus_common.c
|
||||||
ramstage-y += smi.c
|
ramstage-y += smi.c
|
||||||
smm-y += smihandler.c
|
smm-y += smihandler.c
|
||||||
ramstage-y += smmrelocate.c
|
ramstage-y += smmrelocate.c
|
||||||
bootblock-y += spi.c
|
|
||||||
romstage-y += spi.c
|
|
||||||
postcar-y += spi.c
|
|
||||||
ramstage-y += spi.c
|
|
||||||
smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
|
|
||||||
ramstage-y += systemagent.c
|
ramstage-y += systemagent.c
|
||||||
bootblock-y += tsc_freq.c
|
bootblock-y += tsc_freq.c
|
||||||
ramstage-y += tsc_freq.c
|
ramstage-y += tsc_freq.c
|
||||||
|
|
|
||||||
|
|
@ -23,7 +23,6 @@
|
||||||
|
|
||||||
#define SPIBAR_OFFSET 0x3800
|
#define SPIBAR_OFFSET 0x3800
|
||||||
#define SPIBAR8(x) RCBA8(x + SPIBAR_OFFSET)
|
#define SPIBAR8(x) RCBA8(x + SPIBAR_OFFSET)
|
||||||
#define SPIBAR16(x) RCBA16(x + SPIBAR_OFFSET)
|
|
||||||
#define SPIBAR32(x) RCBA32(x + SPIBAR_OFFSET)
|
#define SPIBAR32(x) RCBA32(x + SPIBAR_OFFSET)
|
||||||
|
|
||||||
/* Registers within the SPIBAR */
|
/* Registers within the SPIBAR */
|
||||||
|
|
@ -31,15 +30,6 @@
|
||||||
#define SPIBAR_FDOC 0xb0
|
#define SPIBAR_FDOC 0xb0
|
||||||
#define SPIBAR_FDOD 0xb4
|
#define SPIBAR_FDOD 0xb4
|
||||||
|
|
||||||
#define SPI_PRR_MAX 5
|
|
||||||
#define SPI_PRR(x) (0x74 + ((x) * 4))
|
|
||||||
#define SPI_PRR_SHIFT 12
|
|
||||||
#define SPI_PRR_MASK 0x1fff
|
|
||||||
#define SPI_PRR_BASE_SHIFT 0
|
|
||||||
#define SPI_PRR_LIMIT_SHIFT 16
|
|
||||||
#define SPI_PRR_WPE (1 << 31)
|
|
||||||
#define SPI_PRR_RPE (1 << 15)
|
|
||||||
|
|
||||||
#define SPIBAR_PREOP 0x94
|
#define SPIBAR_PREOP 0x94
|
||||||
#define SPIBAR_OPTYPE 0x96
|
#define SPIBAR_OPTYPE 0x96
|
||||||
#define SPIBAR_OPMENU_LOWER 0x98
|
#define SPIBAR_OPMENU_LOWER 0x98
|
||||||
|
|
@ -83,23 +73,5 @@
|
||||||
|
|
||||||
#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */
|
#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */
|
||||||
#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */
|
#define SPIBAR_HSFS_FLOCKDN (1 << 15)/* Flash Configuration Lock-Down */
|
||||||
#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */
|
|
||||||
#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */
|
|
||||||
#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */
|
|
||||||
#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */
|
|
||||||
#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */
|
|
||||||
#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8)
|
|
||||||
#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */
|
|
||||||
#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */
|
|
||||||
#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */
|
|
||||||
#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */
|
|
||||||
#define SPIBAR_FADDR 0x08 /* SPI flash address */
|
|
||||||
#define SPIBAR_FDATA(n) (0x10 + (4 * n)) /* SPI flash data */
|
|
||||||
#define SPIBAR_SSFS 0x90
|
|
||||||
#define SPIBAR_SSFS_ERROR (1 << 3)
|
|
||||||
#define SPIBAR_SSFS_DONE (1 << 2)
|
|
||||||
#define SPIBAR_SSFC 0x91
|
|
||||||
#define SPIBAR_SSFC_DATA (1 << 14)
|
|
||||||
#define SPIBAR_SSFC_GO (1 << 1)
|
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
|
|
@ -1,666 +0,0 @@
|
||||||
/*
|
|
||||||
* Copyright (C) 2014 Google Inc.
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or modify
|
|
||||||
* it under the terms of the GNU General Public License as published by
|
|
||||||
* the Free Software Foundation; version 2 of the License.
|
|
||||||
*
|
|
||||||
* This program is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* This file is derived from the flashrom project. */
|
|
||||||
#include <stdint.h>
|
|
||||||
#include <stdlib.h>
|
|
||||||
#include <bootstate.h>
|
|
||||||
#include <commonlib/helpers.h>
|
|
||||||
#include <delay.h>
|
|
||||||
#include <device/mmio.h>
|
|
||||||
#include <device/pci_ops.h>
|
|
||||||
#include <console/console.h>
|
|
||||||
#include <device/device.h>
|
|
||||||
#include <device/pci.h>
|
|
||||||
#include <spi_flash.h>
|
|
||||||
#include <spi-generic.h>
|
|
||||||
#include <soc/pci_devs.h>
|
|
||||||
#include <soc/rcba.h>
|
|
||||||
#include <soc/spi.h>
|
|
||||||
|
|
||||||
typedef struct spi_slave ich_spi_slave;
|
|
||||||
|
|
||||||
static int ichspi_lock = 0;
|
|
||||||
|
|
||||||
typedef struct ich9_spi_regs {
|
|
||||||
uint32_t bfpr;
|
|
||||||
uint16_t hsfs;
|
|
||||||
uint16_t hsfc;
|
|
||||||
uint32_t faddr;
|
|
||||||
uint32_t _reserved0;
|
|
||||||
uint32_t fdata[16];
|
|
||||||
uint32_t frap;
|
|
||||||
uint32_t freg[5];
|
|
||||||
uint32_t _reserved1[3];
|
|
||||||
uint32_t pr[5];
|
|
||||||
uint32_t _reserved2[2];
|
|
||||||
uint8_t ssfs;
|
|
||||||
uint8_t ssfc[3];
|
|
||||||
uint16_t preop;
|
|
||||||
uint16_t optype;
|
|
||||||
uint8_t opmenu[8];
|
|
||||||
uint32_t bbar;
|
|
||||||
uint8_t _reserved3[12];
|
|
||||||
uint32_t fdoc;
|
|
||||||
uint32_t fdod;
|
|
||||||
uint8_t _reserved4[8];
|
|
||||||
uint32_t afc;
|
|
||||||
uint32_t lvscc;
|
|
||||||
uint32_t uvscc;
|
|
||||||
uint8_t _reserved5[4];
|
|
||||||
uint32_t fpb;
|
|
||||||
uint8_t _reserved6[28];
|
|
||||||
uint32_t srdl;
|
|
||||||
uint32_t srdc;
|
|
||||||
uint32_t srd;
|
|
||||||
} __packed ich9_spi_regs;
|
|
||||||
|
|
||||||
typedef struct ich_spi_controller {
|
|
||||||
int locked;
|
|
||||||
|
|
||||||
uint8_t *opmenu;
|
|
||||||
int menubytes;
|
|
||||||
uint16_t *preop;
|
|
||||||
uint16_t *optype;
|
|
||||||
uint32_t *addr;
|
|
||||||
uint8_t *data;
|
|
||||||
unsigned int databytes;
|
|
||||||
uint8_t *status;
|
|
||||||
uint16_t *control;
|
|
||||||
uint32_t *bbar;
|
|
||||||
} ich_spi_controller;
|
|
||||||
|
|
||||||
static ich_spi_controller cntlr;
|
|
||||||
|
|
||||||
enum {
|
|
||||||
SPIS_SCIP = 0x0001,
|
|
||||||
SPIS_GRANT = 0x0002,
|
|
||||||
SPIS_CDS = 0x0004,
|
|
||||||
SPIS_FCERR = 0x0008,
|
|
||||||
SSFS_AEL = 0x0010,
|
|
||||||
SPIS_LOCK = 0x8000,
|
|
||||||
SPIS_RESERVED_MASK = 0x7ff0,
|
|
||||||
SSFS_RESERVED_MASK = 0x7fe2
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
SPIC_SCGO = 0x000002,
|
|
||||||
SPIC_ACS = 0x000004,
|
|
||||||
SPIC_SPOP = 0x000008,
|
|
||||||
SPIC_DBC = 0x003f00,
|
|
||||||
SPIC_DS = 0x004000,
|
|
||||||
SPIC_SME = 0x008000,
|
|
||||||
SSFC_SCF_MASK = 0x070000,
|
|
||||||
SSFC_RESERVED = 0xf80000
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
HSFS_FDONE = 0x0001,
|
|
||||||
HSFS_FCERR = 0x0002,
|
|
||||||
HSFS_AEL = 0x0004,
|
|
||||||
HSFS_BERASE_MASK = 0x0018,
|
|
||||||
HSFS_BERASE_SHIFT = 3,
|
|
||||||
HSFS_SCIP = 0x0020,
|
|
||||||
HSFS_FDOPSS = 0x2000,
|
|
||||||
HSFS_FDV = 0x4000,
|
|
||||||
HSFS_FLOCKDN = 0x8000
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
HSFC_FGO = 0x0001,
|
|
||||||
HSFC_FCYCLE_MASK = 0x0006,
|
|
||||||
HSFC_FCYCLE_SHIFT = 1,
|
|
||||||
HSFC_FDBC_MASK = 0x3f00,
|
|
||||||
HSFC_FDBC_SHIFT = 8,
|
|
||||||
HSFC_FSMIE = 0x8000
|
|
||||||
};
|
|
||||||
|
|
||||||
enum {
|
|
||||||
SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
|
|
||||||
SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
|
|
||||||
SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
|
|
||||||
SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
|
|
||||||
};
|
|
||||||
|
|
||||||
#if CONFIG(DEBUG_SPI_FLASH)
|
|
||||||
|
|
||||||
static u8 readb_(const void *addr)
|
|
||||||
{
|
|
||||||
u8 v = read8(addr);
|
|
||||||
printk(BIOS_DEBUG, "read %2.2x from %4.4x\n",
|
|
||||||
v, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
return v;
|
|
||||||
}
|
|
||||||
|
|
||||||
static u16 readw_(const void *addr)
|
|
||||||
{
|
|
||||||
u16 v = read16(addr);
|
|
||||||
printk(BIOS_DEBUG, "read %4.4x from %4.4x\n",
|
|
||||||
v, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
return v;
|
|
||||||
}
|
|
||||||
|
|
||||||
static u32 readl_(const void *addr)
|
|
||||||
{
|
|
||||||
u32 v = read32(addr);
|
|
||||||
printk(BIOS_DEBUG, "read %8.8x from %4.4x\n",
|
|
||||||
v, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
return v;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void writeb_(u8 b, void *addr)
|
|
||||||
{
|
|
||||||
write8(addr, b);
|
|
||||||
printk(BIOS_DEBUG, "wrote %2.2x to %4.4x\n",
|
|
||||||
b, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void writew_(u16 b, void *addr)
|
|
||||||
{
|
|
||||||
write16(addr, b);
|
|
||||||
printk(BIOS_DEBUG, "wrote %4.4x to %4.4x\n",
|
|
||||||
b, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void writel_(u32 b, void *addr)
|
|
||||||
{
|
|
||||||
write32(addr, b);
|
|
||||||
printk(BIOS_DEBUG, "wrote %8.8x to %4.4x\n",
|
|
||||||
b, ((unsigned int) addr & 0xffff) - 0xf020);
|
|
||||||
}
|
|
||||||
|
|
||||||
#else /* CONFIG_DEBUG_SPI_FLASH ^^^ enabled vvv NOT enabled */
|
|
||||||
|
|
||||||
#define readb_(a) read8(a)
|
|
||||||
#define readw_(a) read16(a)
|
|
||||||
#define readl_(a) read32(a)
|
|
||||||
#define writeb_(val, addr) write8(addr, val)
|
|
||||||
#define writew_(val, addr) write16(addr, val)
|
|
||||||
#define writel_(val, addr) write32(addr, val)
|
|
||||||
|
|
||||||
#endif /* CONFIG_DEBUG_SPI_FLASH ^^^ NOT enabled */
|
|
||||||
|
|
||||||
static void write_reg(const void *value, void *dest, uint32_t size)
|
|
||||||
{
|
|
||||||
const uint8_t *bvalue = value;
|
|
||||||
uint8_t *bdest = dest;
|
|
||||||
|
|
||||||
while (size >= 4) {
|
|
||||||
writel_(*(const uint32_t *)bvalue, bdest);
|
|
||||||
bdest += 4; bvalue += 4; size -= 4;
|
|
||||||
}
|
|
||||||
while (size) {
|
|
||||||
writeb_(*bvalue, bdest);
|
|
||||||
bdest++; bvalue++; size--;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void read_reg(const void *src, void *value, uint32_t size)
|
|
||||||
{
|
|
||||||
const uint8_t *bsrc = src;
|
|
||||||
uint8_t *bvalue = value;
|
|
||||||
|
|
||||||
while (size >= 4) {
|
|
||||||
*(uint32_t *)bvalue = readl_(bsrc);
|
|
||||||
bsrc += 4; bvalue += 4; size -= 4;
|
|
||||||
}
|
|
||||||
while (size) {
|
|
||||||
*bvalue = readb_(bsrc);
|
|
||||||
bsrc++; bvalue++; size--;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void ich_set_bbar(uint32_t minaddr)
|
|
||||||
{
|
|
||||||
const uint32_t bbar_mask = 0x00ffff00;
|
|
||||||
uint32_t ichspi_bbar;
|
|
||||||
|
|
||||||
minaddr &= bbar_mask;
|
|
||||||
ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
|
|
||||||
ichspi_bbar |= minaddr;
|
|
||||||
writel_(ichspi_bbar, cntlr.bbar);
|
|
||||||
}
|
|
||||||
|
|
||||||
#define MENU_BYTES member_size(struct ich9_spi_regs, opmenu)
|
|
||||||
|
|
||||||
void spi_init(void)
|
|
||||||
{
|
|
||||||
uint8_t *rcrb; /* Root Complex Register Block */
|
|
||||||
uint32_t rcba; /* Root Complex Base Address */
|
|
||||||
uint8_t bios_cntl;
|
|
||||||
#if defined(__SIMPLE_DEVICE__)
|
|
||||||
pci_devfn_t dev = PCH_DEV_LPC;
|
|
||||||
#else
|
|
||||||
struct device *dev = PCH_DEV_LPC;
|
|
||||||
#endif
|
|
||||||
ich9_spi_regs *ich9_spi;
|
|
||||||
|
|
||||||
rcba = pci_read_config32(dev, 0xf0);
|
|
||||||
/* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */
|
|
||||||
rcrb = (uint8_t *)(rcba & 0xffffc000);
|
|
||||||
ich9_spi = (ich9_spi_regs *)(rcrb + 0x3800);
|
|
||||||
ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN;
|
|
||||||
cntlr.opmenu = ich9_spi->opmenu;
|
|
||||||
cntlr.menubytes = sizeof(ich9_spi->opmenu);
|
|
||||||
cntlr.optype = &ich9_spi->optype;
|
|
||||||
cntlr.addr = &ich9_spi->faddr;
|
|
||||||
cntlr.data = (uint8_t *)ich9_spi->fdata;
|
|
||||||
cntlr.databytes = sizeof(ich9_spi->fdata);
|
|
||||||
cntlr.status = &ich9_spi->ssfs;
|
|
||||||
cntlr.control = (uint16_t *)ich9_spi->ssfc;
|
|
||||||
cntlr.bbar = &ich9_spi->bbar;
|
|
||||||
cntlr.preop = &ich9_spi->preop;
|
|
||||||
ich_set_bbar(0);
|
|
||||||
|
|
||||||
/* Disable the BIOS write protect so write commands are allowed. */
|
|
||||||
bios_cntl = pci_read_config8(dev, 0xdc);
|
|
||||||
bios_cntl &= ~(1 << 5);
|
|
||||||
pci_write_config8(dev, 0xdc, bios_cntl | 0x1);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void spi_init_cb(void *unused)
|
|
||||||
{
|
|
||||||
spi_init();
|
|
||||||
}
|
|
||||||
|
|
||||||
BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL);
|
|
||||||
|
|
||||||
typedef struct spi_transaction {
|
|
||||||
const uint8_t *out;
|
|
||||||
uint32_t bytesout;
|
|
||||||
uint8_t *in;
|
|
||||||
uint32_t bytesin;
|
|
||||||
uint8_t type;
|
|
||||||
uint8_t opcode;
|
|
||||||
uint32_t offset;
|
|
||||||
} spi_transaction;
|
|
||||||
|
|
||||||
static inline void spi_use_out(spi_transaction *trans, unsigned int bytes)
|
|
||||||
{
|
|
||||||
trans->out += bytes;
|
|
||||||
trans->bytesout -= bytes;
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline void spi_use_in(spi_transaction *trans, unsigned int bytes)
|
|
||||||
{
|
|
||||||
trans->in += bytes;
|
|
||||||
trans->bytesin -= bytes;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void spi_setup_type(spi_transaction *trans)
|
|
||||||
{
|
|
||||||
trans->type = 0xFF;
|
|
||||||
|
|
||||||
/* Try to guess spi type from read/write sizes. */
|
|
||||||
if (trans->bytesin == 0) {
|
|
||||||
if (trans->bytesout > 4)
|
|
||||||
/*
|
|
||||||
* If bytesin = 0 and bytesout > 4, we presume this is
|
|
||||||
* a write data operation, which is accompanied by an
|
|
||||||
* address.
|
|
||||||
*/
|
|
||||||
trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
|
|
||||||
else
|
|
||||||
trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (trans->bytesout == 1) { /* and bytesin is > 0 */
|
|
||||||
trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (trans->bytesout == 4) { /* and bytesin is > 0 */
|
|
||||||
trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Fast read command is called with 5 bytes instead of 4 */
|
|
||||||
if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
|
|
||||||
trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
|
|
||||||
--trans->bytesout;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static int spi_setup_opcode(spi_transaction *trans)
|
|
||||||
{
|
|
||||||
uint16_t optypes;
|
|
||||||
uint8_t opmenu[MENU_BYTES];
|
|
||||||
|
|
||||||
trans->opcode = trans->out[0];
|
|
||||||
spi_use_out(trans, 1);
|
|
||||||
if (!ichspi_lock) {
|
|
||||||
/* The lock is off, so just use index 0. */
|
|
||||||
writeb_(trans->opcode, cntlr.opmenu);
|
|
||||||
optypes = readw_(cntlr.optype);
|
|
||||||
optypes = (optypes & 0xfffc) | (trans->type & 0x3);
|
|
||||||
writew_(optypes, cntlr.optype);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* The lock is on. See if what we need is on the menu. */
|
|
||||||
uint8_t optype;
|
|
||||||
uint16_t opcode_index;
|
|
||||||
|
|
||||||
/* Write Enable is handled as atomic prefix */
|
|
||||||
if (trans->opcode == SPI_OPCODE_WREN)
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
|
|
||||||
for (opcode_index = 0; opcode_index < ARRAY_SIZE(opmenu); opcode_index++) {
|
|
||||||
if (opmenu[opcode_index] == trans->opcode)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (opcode_index == ARRAY_SIZE(opmenu)) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
|
|
||||||
trans->opcode);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
optypes = readw_(cntlr.optype);
|
|
||||||
optype = (optypes >> (opcode_index * 2)) & 0x3;
|
|
||||||
if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
|
|
||||||
optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
|
|
||||||
trans->bytesout >= 3) {
|
|
||||||
/* We guessed wrong earlier. Fix it up. */
|
|
||||||
trans->type = optype;
|
|
||||||
}
|
|
||||||
if (optype != trans->type) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
|
|
||||||
optype);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
return opcode_index;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int spi_setup_offset(spi_transaction *trans)
|
|
||||||
{
|
|
||||||
/* Separate the SPI address and data. */
|
|
||||||
switch (trans->type) {
|
|
||||||
case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
|
|
||||||
case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
|
|
||||||
return 0;
|
|
||||||
case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
|
|
||||||
case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
|
|
||||||
trans->offset = ((uint32_t)trans->out[0] << 16) |
|
|
||||||
((uint32_t)trans->out[1] << 8) |
|
|
||||||
((uint32_t)trans->out[2] << 0);
|
|
||||||
spi_use_out(trans, 3);
|
|
||||||
return 1;
|
|
||||||
default:
|
|
||||||
printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n",
|
|
||||||
trans->type);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
|
|
||||||
* below is True) or 0. In case the wait was for the bit(s) to set - write
|
|
||||||
* those bits back, which would cause resetting them.
|
|
||||||
*
|
|
||||||
* Return the last read status value on success or -1 on failure.
|
|
||||||
*/
|
|
||||||
static int ich_status_poll(u16 bitmask, int wait_til_set)
|
|
||||||
{
|
|
||||||
int timeout = 6000; /* This will result in 60 ms */
|
|
||||||
u16 status = 0;
|
|
||||||
|
|
||||||
while (timeout--) {
|
|
||||||
status = readw_(cntlr.status);
|
|
||||||
if (wait_til_set ^ ((status & bitmask) == 0)) {
|
|
||||||
if (wait_til_set)
|
|
||||||
writew_((status & bitmask), cntlr.status);
|
|
||||||
return status;
|
|
||||||
}
|
|
||||||
udelay(10);
|
|
||||||
}
|
|
||||||
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
|
|
||||||
status, bitmask);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
|
|
||||||
size_t bytesout, void *din, size_t bytesin)
|
|
||||||
{
|
|
||||||
uint16_t control;
|
|
||||||
int16_t opcode_index;
|
|
||||||
int with_address;
|
|
||||||
int status;
|
|
||||||
|
|
||||||
spi_transaction trans = {
|
|
||||||
dout, bytesout,
|
|
||||||
din, bytesin,
|
|
||||||
0xff, 0xff, 0
|
|
||||||
};
|
|
||||||
|
|
||||||
/* There has to always at least be an opcode. */
|
|
||||||
if (!bytesout || !dout) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
/* Make sure if we read something we have a place to put it. */
|
|
||||||
if (bytesin != 0 && !din) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (ich_status_poll(SPIS_SCIP, 0) == -1)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
|
|
||||||
|
|
||||||
spi_setup_type(&trans);
|
|
||||||
opcode_index = spi_setup_opcode(&trans);
|
|
||||||
if (opcode_index < 0)
|
|
||||||
return -1;
|
|
||||||
with_address = spi_setup_offset(&trans);
|
|
||||||
if (with_address < 0)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
if (trans.opcode == SPI_OPCODE_WREN) {
|
|
||||||
/*
|
|
||||||
* Treat Write Enable as Atomic Pre-Op if possible
|
|
||||||
* in order to prevent the Management Engine from
|
|
||||||
* issuing a transaction between WREN and DATA.
|
|
||||||
*/
|
|
||||||
if (!ichspi_lock)
|
|
||||||
writew_(trans.opcode, cntlr.preop);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Preset control fields */
|
|
||||||
control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
|
|
||||||
|
|
||||||
/* Issue atomic preop cycle if needed */
|
|
||||||
if (readw_(cntlr.preop))
|
|
||||||
control |= SPIC_ACS;
|
|
||||||
|
|
||||||
if (!trans.bytesout && !trans.bytesin) {
|
|
||||||
/* SPI addresses are 24 bit only */
|
|
||||||
if (with_address)
|
|
||||||
writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* This is a 'no data' command (like Write Enable), its
|
|
||||||
* bytesout size was 1, decremented to zero while executing
|
|
||||||
* spi_setup_opcode() above. Tell the chip to send the
|
|
||||||
* command.
|
|
||||||
*/
|
|
||||||
writew_(control, cntlr.control);
|
|
||||||
|
|
||||||
/* wait for the result */
|
|
||||||
status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
|
|
||||||
if (status == -1)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
if (status & SPIS_FCERR) {
|
|
||||||
printk(BIOS_DEBUG,
|
|
||||||
"ICH SPI: Command transaction error\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Check if this is a write command attempting to transfer more bytes
|
|
||||||
* than the controller can handle. Iterations for writes are not
|
|
||||||
* supported here because each SPI write command needs to be preceded
|
|
||||||
* and followed by other SPI commands, and this sequence is controlled
|
|
||||||
* by the SPI chip driver.
|
|
||||||
*/
|
|
||||||
if (trans.bytesout > cntlr.databytes) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI"
|
|
||||||
" chip driver use CONTROLLER_PAGE_LIMIT?\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Read or write up to databytes bytes at a time until everything has
|
|
||||||
* been sent.
|
|
||||||
*/
|
|
||||||
while (trans.bytesout || trans.bytesin) {
|
|
||||||
uint32_t data_length;
|
|
||||||
|
|
||||||
/* SPI addresses are 24 bit only */
|
|
||||||
/* http://www.intel.com/content/dam/www/public/us/en/documents/
|
|
||||||
* datasheets/pentium-n3520-j2850-celeron-n2920-n2820-n2815-
|
|
||||||
* n2806-j1850-j1750-datasheet.pdf
|
|
||||||
*/
|
|
||||||
writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
|
|
||||||
|
|
||||||
if (trans.bytesout)
|
|
||||||
data_length = min(trans.bytesout, cntlr.databytes);
|
|
||||||
else
|
|
||||||
data_length = min(trans.bytesin, cntlr.databytes);
|
|
||||||
|
|
||||||
/* Program data into FDATA0 to N */
|
|
||||||
if (trans.bytesout) {
|
|
||||||
write_reg(trans.out, cntlr.data, data_length);
|
|
||||||
spi_use_out(&trans, data_length);
|
|
||||||
if (with_address)
|
|
||||||
trans.offset += data_length;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Add proper control fields' values */
|
|
||||||
control &= ~((cntlr.databytes - 1) << 8);
|
|
||||||
control |= SPIC_DS;
|
|
||||||
control |= (data_length - 1) << 8;
|
|
||||||
|
|
||||||
/* write it */
|
|
||||||
writew_(control, cntlr.control);
|
|
||||||
|
|
||||||
/* Wait for Cycle Done Status or Flash Cycle Error. */
|
|
||||||
status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
|
|
||||||
if (status == -1)
|
|
||||||
return -1;
|
|
||||||
|
|
||||||
if (status & SPIS_FCERR) {
|
|
||||||
printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (trans.bytesin) {
|
|
||||||
read_reg(cntlr.data, trans.in, data_length);
|
|
||||||
spi_use_in(&trans, data_length);
|
|
||||||
if (with_address)
|
|
||||||
trans.offset += data_length;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Clear atomic preop now that xfer is done */
|
|
||||||
writew_(0, cntlr.preop);
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Use first empty Protected Range Register to cover region of flash */
|
|
||||||
static int spi_flash_protect(const struct spi_flash *flash,
|
|
||||||
const struct region *region,
|
|
||||||
const enum ctrlr_prot_type type)
|
|
||||||
{
|
|
||||||
u32 start = region_offset(region);
|
|
||||||
u32 end = start + region_sz(region) - 1;
|
|
||||||
u32 reg;
|
|
||||||
u32 protect_mask = 0;
|
|
||||||
int prr;
|
|
||||||
|
|
||||||
/* Find first empty PRR */
|
|
||||||
for (prr = 0; prr < SPI_PRR_MAX; prr++) {
|
|
||||||
reg = SPIBAR32(SPI_PRR(prr));
|
|
||||||
if (reg == 0)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
if (prr >= SPI_PRR_MAX) {
|
|
||||||
printk(BIOS_ERR, "ERROR: No SPI PRR free!\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Set protected range base and limit */
|
|
||||||
reg = ((end >> SPI_PRR_SHIFT) & SPI_PRR_MASK);
|
|
||||||
reg <<= SPI_PRR_LIMIT_SHIFT;
|
|
||||||
reg |= ((start >> SPI_PRR_SHIFT) & SPI_PRR_MASK);
|
|
||||||
|
|
||||||
switch (type) {
|
|
||||||
case WRITE_PROTECT:
|
|
||||||
protect_mask |= SPI_PRR_WPE;
|
|
||||||
break;
|
|
||||||
case READ_PROTECT:
|
|
||||||
protect_mask |= SPI_PRR_RPE;
|
|
||||||
break;
|
|
||||||
case READ_WRITE_PROTECT:
|
|
||||||
protect_mask |= (SPI_PRR_RPE | SPI_PRR_WPE);
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
printk(BIOS_ERR, "ERROR: Seeking invalid protection!\n");
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
reg |= protect_mask;
|
|
||||||
|
|
||||||
/* Set the PRR register and verify it is protected */
|
|
||||||
SPIBAR32(SPI_PRR(prr)) = reg;
|
|
||||||
reg = SPIBAR32(SPI_PRR(prr));
|
|
||||||
if (!(reg & protect_mask)) {
|
|
||||||
printk(BIOS_ERR, "ERROR: Unable to set SPI PRR %d\n", prr);
|
|
||||||
return -1;
|
|
||||||
}
|
|
||||||
|
|
||||||
printk(BIOS_INFO, "%s: PRR %d is enabled for range 0x%08x-0x%08x\n",
|
|
||||||
__func__, prr, start, end);
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int xfer_vectors(const struct spi_slave *slave,
|
|
||||||
struct spi_op vectors[], size_t count)
|
|
||||||
{
|
|
||||||
return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
|
|
||||||
}
|
|
||||||
|
|
||||||
static const struct spi_ctrlr spi_ctrlr = {
|
|
||||||
.xfer_vector = xfer_vectors,
|
|
||||||
.max_xfer_size = member_size(ich9_spi_regs, fdata),
|
|
||||||
.flash_protect = spi_flash_protect,
|
|
||||||
};
|
|
||||||
|
|
||||||
const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
|
|
||||||
{
|
|
||||||
.ctrlr = &spi_ctrlr,
|
|
||||||
.bus_start = 0,
|
|
||||||
.bus_end = 0,
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
|
|
||||||
Loading…
Reference in New Issue