From 961ceffd0dc20393068e3bc5db71c2aa20fb8c95 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20Niew=C3=B6hner?= Date: Mon, 23 Nov 2020 13:31:30 +0100 Subject: [PATCH] mb/supermicro/x11ssm-f: configure the BMC jumper JPB1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Set `bmc_jumper_gpio` to the JPB1 gpio to enable/disable BMC/IPMI according to its value. Test: Boot with jumper set to each enabled and disabled and check debug log if IPMI gets enabled/disabled accordingly. Tested successfully. Signed-off-by: Michael Niewöhner Change-Id: I8581556d915cbad2c743a79db273479ba55798fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48095 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- .../x11-lga1151-series/variants/x11ssm-f/overridetree.cb | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb index 7757b69b3f..8bf60d3894 100644 --- a/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb +++ b/src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/overridetree.cb @@ -89,6 +89,8 @@ chip soc/intel/skylake end device pci 1f.0 on # LPC Interface chip drivers/ipmi + use pch_gpio as gpio_dev + register "bmc_jumper_gpio" = "GPP_D22" # JPB1 # On cold boot it takes a while for the BMC to start the IPMI service register "wait_for_bmc" = "1" register "bmc_boot_timeout" = "60"