GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/gigabyte/ga-h61m-s2pv: Add new mainboard 

Tested with GRUB 2.02 as a payload, booting Arch Linux with
latest kernel. This code is based on the output of autoport
as well as existing ga-b75m-d3h and ga-b75m-d3v mainboards.

Working:
 - Serial port I/O
 - S3 suspend/resume (broken with SeaBIOS 1.11.1)
 - USB ports and headers
 - Gigabit Ethernet
 - Integrated graphics (libgfxinit)
 - PCIe x16 graphics
 - PCIe x1
 - SATA controller
 - Hardware Monitor
 - Fan Control (fancontrol on linux works well)
 - Native raminit (4+4GB, 4+2GB, 2+2GB, DDR3-1333)
 - Native graphics init with libgfxinit
 - flashrom, using the internal programmer. Tested with coreboot,
   as well as with the vendor firmware. Backup chip is untested.
 - NVRAM settings. Only `gfx_uma_size` and `debug_level` have been
   tested with values different from the default.

Untested:
 - VGA BIOS for integrated graphics init
 - DVI port. It can detect a "fake" display, that is, an
   EEPROM connected to the DVI port.
 - PS/2 ports
 - Audio: Only rear output (green) has been tested.
 - EHCI debug.
 - Parallel port
 - Non-Linux OSes
 - ACPI thermal zone and fan control (probably not working)

Not working:
 - SATA devices with Tianocore (payload issue)
 - PCIe to PCI bridge. It seems to be poorly supported on Linux,
   it lacks a public datasheet and vendor BIOS behaves in the
   same way: The bridge and the devices behind it appear, but
   drivers fail to find devices attached to the bridge.

Change-Id: I598a0b75093a0f1aef2ac615035d66786a8c22cb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/25912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This commit is contained in:
Angel Pons 2018-04-29 19:56:49 +02:00 committed by Martin Roth
parent f7741d7964
commit 963500fe0b
19 changed files with 928 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

75
src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig Normal file
View File

@ -0,0 +1,75 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
if BOARD_GIGABYTE_GA_H61M_S2PV
config BOARD_SPECIFIC_OPTIONS
def_bool y
select ARCH_X86
select BOARD_ROMSIZE_KB_4096
select CPU_INTEL_SOCKET_LGA1155
select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
select INTEL_INT15
select NORTHBRIDGE_INTEL_SANDYBRIDGE
select SERIRQ_CONTINUOUS_MODE
select SOUTHBRIDGE_INTEL_BD82X6X
select USE_NATIVE_RAMINIT
select SUPERIO_ITE_IT8728F
select MAINBOARD_HAS_LIBGFXINIT
select HAVE_OPTION_TABLE
select HAVE_CMOS_DEFAULT
config HAVE_IFD_BIN
bool
default n
config HAVE_ME_BIN
bool
default n
config MAINBOARD_DIR
string
default "gigabyte/ga-h61m-s2pv"
config MAINBOARD_PART_NUMBER
string
default "GA-H61M-S2PV"
config VGA_BIOS_FILE
string
default "pci8086,0102.rom"
config VGA_BIOS_ID
string
default "8086,0102"
config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
hex
default 0x5001
config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
hex
default 0x1458
config MAX_CPUS
int
default 8
config USBDEBUG_HCD_INDEX # FIXME: check this
int
default 2
endif # BOARD_GIGABYTE_GA_H61M_S2PV

2
src/mainboard/gigabyte/ga-h61m-s2pv/Kconfig.name Normal file
View File

@ -0,0 +1,2 @@
config BOARD_GIGABYTE_GA_H61M_S2PV
bool "GA-H61M-S2PV"

3
src/mainboard/gigabyte/ga-h61m-s2pv/Makefile.inc Normal file
View File

@ -0,0 +1,3 @@
romstage-y += gpio.c
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads

0
src/mainboard/gigabyte/ga-h61m-s2pv/acpi/ec.asl Normal file
View File

23
src/mainboard/gigabyte/ga-h61m-s2pv/acpi/mainboard.asl Normal file
View File

@ -0,0 +1,23 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
Scope (\_SB)
{
Device (PWRB)
{
Name (_HID, EisaId("PNP0C0C"))
}
}

29
src/mainboard/gigabyte/ga-h61m-s2pv/acpi/platform.asl Normal file
View File

@ -0,0 +1,29 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 The Chromium OS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* The _PTS method (Prepare To Sleep) is called before the OS is
* entering a sleep state. The sleep state number is passed in Arg0
*/
Method(_PTS,1)
{
}
/* The _WAK method is called on system wakeup */
Method(_WAK,1)
{
Return(Package(){0,0})
}

19
src/mainboard/gigabyte/ga-h61m-s2pv/acpi/superio.asl Normal file
View File

@ -0,0 +1,19 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 The ChromiumOS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* mainboard configuration */
#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard
#define SIO_ENABLE_PS2M // Enable PS/2 Mouse

61
src/mainboard/gigabyte/ga-h61m-s2pv/acpi/thermal.asl Normal file
View File

@ -0,0 +1,61 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
// Thermal Zone
Scope (\_TZ)
{
ThermalZone (THRM)
{
Name (_TC1, 0x02)
Name (_TC2, 0x03)
// Thermal zone polling frequency: 10 seconds
Name (_TZP, 100)
// Thermal sampling period for passive cooling: 10 seconds
Name (_TSP, 100)
// Convert from Degrees C to 1/10 Kelvin for ACPI
Method (CTOK, 1)
{
// 10th of Degrees C
Multiply (Arg0, 10, Local0)
// Convert to Kelvin
Add (Local0, 2732, Local0)
Return (Local0)
}
// Threshold for OS to shutdown
Method (_CRT, 0, Serialized)
{
Return (CTOK (\TCRT))
}
// Threshold for passive cooling
Method (_PSV, 0, Serialized)
{
Return (CTOK (\TPSV))
}
// Processors used for passive cooling
Method (_PSL, 0, Serialized)
{
Return (\PPKG ())
}
}
}

27
src/mainboard/gigabyte/ga-h61m-s2pv/acpi_tables.c Normal file
View File

@ -0,0 +1,27 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <southbridge/intel/bd82x6x/nvs.h>
void acpi_create_gnvs(global_nvs_t *gnvs)
{
/* Disable USB ports in S3 by default */
gnvs->s3u0 = 0;
gnvs->s3u1 = 0;
/* Disable USB ports in S5 by default */
gnvs->s5u0 = 0;
gnvs->s5u1 = 0;
}

6
src/mainboard/gigabyte/ga-h61m-s2pv/board_info.txt Normal file
View File

@ -0,0 +1,6 @@
Category: desktop
Board URL: https://www.gigabyte.com/Motherboard/GA-H61M-S2PV-rev-23#ov
ROM package: SOIC-8
ROM protocol: SPI
ROM socketed: n
Flashrom support: y

6
src/mainboard/gigabyte/ga-h61m-s2pv/cmos.default Normal file
View File

@ -0,0 +1,6 @@
boot_option=Fallback
debug_level=Debug
power_on_after_fail=Enable
nmi=Enable
sata_mode=AHCI
gfx_uma_size=32M

112
src/mainboard/gigabyte/ga-h61m-s2pv/cmos.layout Normal file
View File

@ -0,0 +1,112 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007-2008 coresystems GmbH
## Copyright (C) 2014 Vladimir Serbinenko
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
# -----------------------------------------------------------------
entries
# -----------------------------------------------------------------
# Status Register A
# -----------------------------------------------------------------
# Status Register B
# -----------------------------------------------------------------
# Status Register C
#96 4 r 0 status_c_rsvd
#100 1 r 0 uf_flag
#101 1 r 0 af_flag
#102 1 r 0 pf_flag
#103 1 r 0 irqf_flag
# -----------------------------------------------------------------
# Status Register D
#104 7 r 0 status_d_rsvd
#111 1 r 0 valid_cmos_ram
# -----------------------------------------------------------------
# Diagnostic Status Register
#112 8 r 0 diag_rsvd1
# -----------------------------------------------------------------
0 120 r 0 reserved_memory
#120 264 r 0 unused
# -----------------------------------------------------------------
# RTC_BOOT_BYTE (coreboot hardcoded)
384 1 e 4 boot_option
388 4 h 0 reboot_counter
#390 2 r 0 unused?
# -----------------------------------------------------------------
# coreboot config options: console
#392 3 r 0 unused
395 4 e 6 debug_level
#399 1 r 0 unused
# coreboot config options: southbridge
408 1 e 1 nmi
409 2 e 7 power_on_after_fail
#411 10 r 0 unused
421 1 e 9 sata_mode
#422 2 r 0 unused
# coreboot config options: cpu
#425 7 r 0 unused
# coreboot config options: northbridge
432 3 e 11 gfx_uma_size
#435 549 r 0 unused
# SandyBridge MRC Scrambler Seed values
896 32 r 0 mrc_scrambler_seed
928 32 r 0 mrc_scrambler_seed_s3
960 16 r 0 mrc_scrambler_seed_chk
# coreboot config options: check sums
984 16 h 0 check_sum
# -----------------------------------------------------------------
enumerations
#ID value text
1 0 Disable
1 1 Enable
4 0 Fallback
4 1 Normal
6 0 Emergency
6 1 Alert
6 2 Critical
6 3 Error
6 4 Warning
6 5 Notice
6 6 Info
6 7 Debug
6 8 Spew
7 0 Disable
7 1 Enable
7 2 Keep
9 0 AHCI
9 1 IDE
11 0 32M
11 1 64M
11 2 96M
11 3 128M
11 4 160M
11 5 192M
11 6 224M
# -----------------------------------------------------------------
checksums
checksum 392 415 984

117
src/mainboard/gigabyte/ga-h61m-s2pv/devicetree.cb Normal file
View File

@ -0,0 +1,117 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
chip northbridge/intel/sandybridge
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }"
register "gfx.link_frequency_270_mhz" = "0"
register "gfx.ndid" = "3"
register "gfx.use_spread_spectrum_clock" = "0"
register "gpu_dp_b_hotplug" = "4"
register "gpu_dp_c_hotplug" = "4"
register "gpu_dp_d_hotplug" = "4"
register "gpu_panel_port_select" = "0"
device cpu_cluster 0x0 on
chip cpu/intel/socket_LGA1155
device lapic 0x0 on
end
end
chip cpu/intel/model_206ax
register "c1_acpower" = "1"
register "c1_battery" = "1"
register "c2_acpower" = "3"
register "c2_battery" = "3"
register "c3_acpower" = "5"
register "c3_battery" = "5"
device lapic 0xacac off
end
end
end
register "pci_mmio_size" = "2048"
device domain 0x0 on
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
register "c2_latency" = "0x0065"
register "docking_supported" = "0"
register "gen1_dec" = "0x003c0a01"
register "p_cnt_throttling_supported" = "0"
register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }"
register "pcie_port_coalesce" = "1"
register "sata_interface_speed_support" = "0x3"
register "sata_port_map" = "0x33"
register "spi_lvscc" = "0x2005"
register "spi_uvscc" = "0x2005"
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT
device pci 19.0 off end # Intel Gigabit Ethernet
device pci 1a.0 on end # USB2 EHCI #2
device pci 1b.0 on end # High Definition Audio Audio controller
device pci 1c.0 on end # PCIe x1 Port (PCIEX1)
device pci 1c.1 off end # Unused PCIe Port
device pci 1c.2 off end # Unused PCIe Port
device pci 1c.3 off end # Unused PCIe Port
device pci 1c.4 on end # Realtek RTL8111F Ethernet Controller
device pci 1c.5 on end # ITE IT8892F PCIe to PCI bridge
device pci 1c.6 off end # Unused PCIe Port
device pci 1c.7 off end # Unused PCIe Port
device pci 1d.0 on end # USB2 EHCI #1
device pci 1e.0 on end # PCI bridge
device pci 1f.0 on # LPC bridge
chip superio/ite/it8728f
device pnp 2e.0 off end # Floppy, not routed.
device pnp 2e.1 on # COM1
io 0x60 = 0x03f8
irq 0x70 = 4
end
device pnp 2e.2 off end # COM2, not routed.
device pnp 2e.3 on # Parallel port
io 0x60 = 0x0378
irq 0x70 = 7
drq 0x74 = 4
end
device pnp 2e.4 on # Environment Controller
io 0x60 = 0x0a30
irq 0x70 = 9
io 0x62 = 0x0a20
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
irq 0x70 = 1
io 0x62 = 0x64
end
device pnp 2e.6 on # Mouse
irq 0x70 = 12
end
device pnp 2e.7 off # GPIO
io 0x25 = 0x40
io 0x27 = 0x10
io 0x2c = 0x80
io 0x62 = 0x0a00
io 0xcb = 0x00
io 0xf1 = 0x40
end
device pnp 2e.a off end # CIR, not routed.
end
end
device pci 1f.2 on end # SATA Controller 1
device pci 1f.3 on end # SMBus
device pci 1f.5 off end # SATA Controller 2
device pci 1f.6 off end # Thermal
end
device pci 00.0 on end # Host bridge
device pci 01.0 on end # PCIe Bridge for discrete graphics (PCIEX16)
device pci 02.0 on end # Internal graphics VGA controller
end
end

46
src/mainboard/gigabyte/ga-h61m-s2pv/dsdt.asl Normal file
View File

@ -0,0 +1,46 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0
DefinitionBlock(
"dsdt.aml",
"DSDT",
0x03, // DSDT revision: ACPI v3.0
"COREv4", // OEM id
"COREBOOT", // OEM table id
0x20141018 // OEM revision
)
{
// Some generic macros
#include "acpi/mainboard.asl"
#include "acpi/platform.asl"
#include "acpi/superio.asl"
#include "acpi/thermal.asl"
#include <cpu/intel/model_206ax/acpi/cpu.asl>
#include <southbridge/intel/bd82x6x/acpi/platform.asl>
/* global NVS and variables. */
#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
#include <southbridge/intel/bd82x6x/acpi/sleepstates.asl>
Scope (\_SB) {
Device (PCI0)
{
#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
#include <southbridge/intel/bd82x6x/acpi/pch.asl>
}
}
}

29
src/mainboard/gigabyte/ga-h61m-s2pv/gma-mainboard.ads Normal file
View File

@ -0,0 +1,29 @@
--
-- This file is part of the coreboot project.
--
-- Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
--
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation; version 2 of the License.
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
with HW.GFX.GMA;
with HW.GFX.GMA.Display_Probing;
use HW.GFX.GMA;
use HW.GFX.GMA.Display_Probing;
private package GMA.Mainboard is
ports : constant Port_List :=
(HDMI1,
Analog,
others => Disabled);
end GMA.Mainboard;

202
src/mainboard/gigabyte/ga-h61m-s2pv/gpio.c Normal file
View File

@ -0,0 +1,202 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <southbridge/intel/common/gpio.h>
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
.gpio0 = GPIO_MODE_GPIO,
.gpio1 = GPIO_MODE_GPIO,
.gpio2 = GPIO_MODE_GPIO,
.gpio3 = GPIO_MODE_GPIO,
.gpio4 = GPIO_MODE_GPIO,
.gpio5 = GPIO_MODE_GPIO,
.gpio6 = GPIO_MODE_GPIO,
.gpio7 = GPIO_MODE_GPIO,
.gpio8 = GPIO_MODE_GPIO,
.gpio9 = GPIO_MODE_NATIVE,
.gpio10 = GPIO_MODE_NATIVE,
.gpio11 = GPIO_MODE_NATIVE,
.gpio12 = GPIO_MODE_GPIO,
.gpio13 = GPIO_MODE_GPIO,
.gpio14 = GPIO_MODE_NATIVE,
.gpio15 = GPIO_MODE_GPIO,
.gpio16 = GPIO_MODE_GPIO,
.gpio17 = GPIO_MODE_GPIO,
.gpio18 = GPIO_MODE_NATIVE,
.gpio19 = GPIO_MODE_GPIO,
.gpio20 = GPIO_MODE_NATIVE,
.gpio21 = GPIO_MODE_GPIO,
.gpio22 = GPIO_MODE_GPIO,
.gpio23 = GPIO_MODE_NATIVE,
.gpio24 = GPIO_MODE_GPIO,
.gpio25 = GPIO_MODE_NATIVE,
.gpio26 = GPIO_MODE_NATIVE,
.gpio27 = GPIO_MODE_GPIO,
.gpio28 = GPIO_MODE_GPIO,
.gpio29 = GPIO_MODE_GPIO,
.gpio30 = GPIO_MODE_NATIVE,
.gpio31 = GPIO_MODE_GPIO,
};
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
.gpio0 = GPIO_DIR_INPUT,
.gpio1 = GPIO_DIR_INPUT,
.gpio2 = GPIO_DIR_INPUT,
.gpio3 = GPIO_DIR_INPUT,
.gpio4 = GPIO_DIR_INPUT,
.gpio5 = GPIO_DIR_INPUT,
.gpio6 = GPIO_DIR_INPUT,
.gpio7 = GPIO_DIR_INPUT,
.gpio8 = GPIO_DIR_OUTPUT,
.gpio12 = GPIO_DIR_OUTPUT,
.gpio13 = GPIO_DIR_INPUT,
.gpio15 = GPIO_DIR_OUTPUT,
.gpio16 = GPIO_DIR_INPUT,
.gpio17 = GPIO_DIR_INPUT,
.gpio19 = GPIO_DIR_INPUT,
.gpio21 = GPIO_DIR_INPUT,
.gpio22 = GPIO_DIR_INPUT,
.gpio24 = GPIO_DIR_OUTPUT,
.gpio27 = GPIO_DIR_INPUT,
.gpio28 = GPIO_DIR_OUTPUT,
.gpio29 = GPIO_DIR_INPUT,
.gpio31 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set1 pch_gpio_set1_level = {
.gpio8 = GPIO_LEVEL_HIGH,
.gpio12 = GPIO_LEVEL_HIGH,
.gpio15 = GPIO_LEVEL_LOW,
.gpio24 = GPIO_LEVEL_LOW,
.gpio28 = GPIO_LEVEL_LOW,
};
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
};
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
.gpio13 = GPIO_INVERT,
};
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
};
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
.gpio32 = GPIO_MODE_GPIO,
.gpio33 = GPIO_MODE_GPIO,
.gpio34 = GPIO_MODE_GPIO,
.gpio35 = GPIO_MODE_GPIO,
.gpio36 = GPIO_MODE_GPIO,
.gpio37 = GPIO_MODE_GPIO,
.gpio38 = GPIO_MODE_GPIO,
.gpio39 = GPIO_MODE_GPIO,
.gpio40 = GPIO_MODE_NATIVE,
.gpio41 = GPIO_MODE_NATIVE,
.gpio42 = GPIO_MODE_NATIVE,
.gpio43 = GPIO_MODE_NATIVE,
.gpio44 = GPIO_MODE_NATIVE,
.gpio45 = GPIO_MODE_NATIVE,
.gpio46 = GPIO_MODE_NATIVE,
.gpio47 = GPIO_MODE_NATIVE,
.gpio48 = GPIO_MODE_GPIO,
.gpio49 = GPIO_MODE_GPIO,
.gpio50 = GPIO_MODE_NATIVE,
.gpio51 = GPIO_MODE_NATIVE,
.gpio52 = GPIO_MODE_NATIVE,
.gpio53 = GPIO_MODE_NATIVE,
.gpio54 = GPIO_MODE_NATIVE,
.gpio55 = GPIO_MODE_NATIVE,
.gpio56 = GPIO_MODE_NATIVE,
.gpio57 = GPIO_MODE_GPIO,
.gpio58 = GPIO_MODE_NATIVE,
.gpio59 = GPIO_MODE_NATIVE,
.gpio60 = GPIO_MODE_NATIVE,
.gpio61 = GPIO_MODE_NATIVE,
.gpio62 = GPIO_MODE_NATIVE,
.gpio63 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
.gpio32 = GPIO_DIR_OUTPUT,
.gpio33 = GPIO_DIR_OUTPUT,
.gpio34 = GPIO_DIR_INPUT,
.gpio35 = GPIO_DIR_OUTPUT,
.gpio36 = GPIO_DIR_INPUT,
.gpio37 = GPIO_DIR_INPUT,
.gpio38 = GPIO_DIR_INPUT,
.gpio39 = GPIO_DIR_INPUT,
.gpio48 = GPIO_DIR_INPUT,
.gpio49 = GPIO_DIR_INPUT,
.gpio57 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set2 pch_gpio_set2_level = {
.gpio32 = GPIO_LEVEL_HIGH,
.gpio33 = GPIO_LEVEL_HIGH,
.gpio35 = GPIO_LEVEL_LOW,
};
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
};
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
.gpio64 = GPIO_MODE_NATIVE,
.gpio65 = GPIO_MODE_NATIVE,
.gpio66 = GPIO_MODE_NATIVE,
.gpio67 = GPIO_MODE_NATIVE,
.gpio68 = GPIO_MODE_GPIO,
.gpio69 = GPIO_MODE_GPIO,
.gpio70 = GPIO_MODE_NATIVE,
.gpio71 = GPIO_MODE_NATIVE,
.gpio72 = GPIO_MODE_GPIO,
.gpio73 = GPIO_MODE_NATIVE,
.gpio74 = GPIO_MODE_NATIVE,
.gpio75 = GPIO_MODE_NATIVE,
};
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
.gpio68 = GPIO_DIR_INPUT,
.gpio69 = GPIO_DIR_INPUT,
.gpio72 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set3 pch_gpio_set3_level = {
};
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
};
const struct pch_gpio_map mainboard_gpio_map = {
.set1 = {
.mode = &pch_gpio_set1_mode,
.direction = &pch_gpio_set1_direction,
.level = &pch_gpio_set1_level,
.blink = &pch_gpio_set1_blink,
.invert = &pch_gpio_set1_invert,
.reset = &pch_gpio_set1_reset,
},
.set2 = {
.mode = &pch_gpio_set2_mode,
.direction = &pch_gpio_set2_direction,
.level = &pch_gpio_set2_level,
.reset = &pch_gpio_set2_reset,
},
.set3 = {
.mode = &pch_gpio_set3_mode,
.direction = &pch_gpio_set3_direction,
.level = &pch_gpio_set3_level,
.reset = &pch_gpio_set3_reset,
},
};

71
src/mainboard/gigabyte/ga-h61m-s2pv/hda_verb.c Normal file
View File

@ -0,0 +1,71 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/azalia_device.h>
const u32 cim_verb_data[] = {
0x10ec0887, /* Codec Vendor / Device ID: Realtek */
0x1458a002, /* Subsystem ID */
0x0000000f, /* Number of 4 dword sets */
/* NID 0x01: Subsystem ID. */
AZALIA_SUBVENDOR(0x2, 0x1458a002),
/* NID 0x11. */
AZALIA_PIN_CFG(0x2, 0x11, 0x411111f0),
/* NID 0x12. */
AZALIA_PIN_CFG(0x2, 0x12, 0x411111f0),
/* NID 0x14. */
AZALIA_PIN_CFG(0x2, 0x14, 0x01014410),
/* NID 0x15. */
AZALIA_PIN_CFG(0x2, 0x15, 0x411111f0),
/* NID 0x16. */
AZALIA_PIN_CFG(0x2, 0x16, 0x411111f0),
/* NID 0x17. */
AZALIA_PIN_CFG(0x2, 0x17, 0x411111f0),
/* NID 0x18. */
AZALIA_PIN_CFG(0x2, 0x18, 0x01a19c50),
/* NID 0x19. */
AZALIA_PIN_CFG(0x2, 0x19, 0x02a19c60),
/* NID 0x1a. */
AZALIA_PIN_CFG(0x2, 0x1a, 0x0181345f),
/* NID 0x1b. */
AZALIA_PIN_CFG(0x2, 0x1b, 0x02214c20),
/* NID 0x1c. */
AZALIA_PIN_CFG(0x2, 0x1c, 0x411111f0),
/* NID 0x1d. */
AZALIA_PIN_CFG(0x2, 0x1d, 0x4004c601),
/* NID 0x1e. */
AZALIA_PIN_CFG(0x2, 0x1e, 0x411111f0),
/* NID 0x1f. */
AZALIA_PIN_CFG(0x2, 0x1f, 0x411111f0),
};
const u32 pc_beep_verbs[0] = {};
AZALIA_ARRAY_SIZES;

29
src/mainboard/gigabyte/ga-h61m-s2pv/mainboard.c Normal file
View File

@ -0,0 +1,29 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/device.h>
#include <drivers/intel/gma/int15.h>
#include <southbridge/intel/bd82x6x/pch.h>
static void mainboard_enable(struct device *dev)
{
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE,
GMA_INT15_PANEL_FIT_DEFAULT,
GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};

71
src/mainboard/gigabyte/ga-h61m-s2pv/romstage.c Normal file
View File

@ -0,0 +1,71 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2018 Angel Pons <th3fanbus@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <northbridge/intel/sandybridge/raminit_native.h>
#include <northbridge/intel/sandybridge/sandybridge.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8728f/it8728f.h>
#define SUPERIO_GPIO PNP_DEV(0x2e, IT8728F_GPIO)
#define SERIAL_DEV PNP_DEV(0x2e, 0x01)
void pch_enable_lpc(void)
{
pci_write_config16(PCH_LPC_DEV, LPC_EN, KBC_LPC_EN |
CNF1_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN);
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10);
}
void mainboard_rcba_config(void)
{
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
{ 1, 0, 0 },
{ 1, 0, 0 },
{ 1, 0, 1 },
{ 1, 0, 1 },
{ 1, 0, 2 },
{ 1, 0, 2 },
{ 1, 0, 3 },
{ 1, 0, 3 },
{ 1, 0, 4 },
{ 1, 0, 4 },
{ 1, 0, 6 },
{ 1, 0, 5 },
{ 1, 0, 5 },
{ 1, 0, 6 },
};
void mainboard_early_init(int s3resume)
{
}
void mainboard_config_superio(void)
{
/* Enable serial port and flip some magic bits */
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
ite_reg_write(SUPERIO_GPIO, 0xEF, 0x7E); // magic
}
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
{
read_spd(&spd[0], 0x50, id_only);
read_spd(&spd[2], 0x52, id_only);
}