diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig
index 00875fbb25..9e3e9dccb3 100644
--- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig
@@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS
 	select DRIVER_INTEL_I210
 	select SOC_INTEL_COMMON_BLOCK_LPC_COMB_ENABLE
 	select EHL_TSN_DRIVER
+	select DRIVERS_ETH_PHY_M88E1512
 
 config FMDFILE
 	default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/mc_ehl.fmd"
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
index 4dd062cb55..b8ea1b6213 100644
--- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
+++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb
@@ -181,12 +181,48 @@ chip soc/intel/elkhartlake
 		device pci 1c.6 on	end # RP7 (pcie3 multi VC)
 
 		device pci 1d.0 off	end # Intel PSE IPC (local host to PSE)
-		device pci 1d.1 on	end # Intel PSE Time-Sensitive Networking GbE 0
-		device pci 1d.2 on	end # Intel PSE Time-Sensitive Networking GbE 1
+		device pci 1d.1 on	    # Intel PSE Time-Sensitive Networking GbE 0
+			# Enable external Marvell PHY 88E1512
+			chip drivers/net/phy/m88e1512
+				register "configure_leds" = "true"
+				# LED[0]: On - 1000 Mbps Link, Off - Else
+				register "led_0_ctrl" = "7"
+				# LED[1]: On - Link, Blink - Activity, Off - No Link
+				register "led_1_ctrl" = "1"
+				device mdio 0 on    # PHY address
+					ops m88e1512_ops
+				end
+			end
+		end
+		device pci 1d.2 on	    # Intel PSE Time-Sensitive Networking GbE 1
+			# Enable external Marvell PHY 88E1512
+			chip drivers/net/phy/m88e1512
+				register "configure_leds" = "true"
+				# LED[0]: On - 1000 Mbps Link, Off - Else
+				register "led_0_ctrl" = "7"
+				# LED[1]: On - Link, Blink - Activity, Off - No Link
+				register "led_1_ctrl" = "1"
+				device mdio 1 on    # PHY address
+					ops m88e1512_ops
+				end
+			end
+		end
 
 		device pci 1e.0 on	end # UART0
 		device pci 1e.1 on	end # UART1
-		device pci 1e.4 on	end # PCH Time-Sensitive Networking GbE
+		device pci 1e.4 on	    # PCH Time-Sensitive Networking GbE
+			# Enable external Marvell PHY 88E1512
+			chip drivers/net/phy/m88e1512
+				register "configure_leds" = "true"
+				# LED[0]: On - 1000 Mbps Link, Off - Else
+				register "led_0_ctrl" = "7"
+				# LED[1]: On - Link, Blink - Activity, Off - No Link
+				register "led_1_ctrl" = "1"
+				device mdio 1 on    # PHY address
+					ops m88e1512_ops
+				end
+			end
+		end
 
 		device pci 1f.0 on	    # eSPI Interface
 			chip drivers/pc80/tpm