From 99efe80122395187dbb83b76980c4f0a7539bc3c Mon Sep 17 00:00:00 2001
From: Li-Ta Lo <ollie@lanl.gov>
Date: Tue, 15 Jun 2004 23:55:55 +0000
Subject: [PATCH] add support for AMD Serenade mainboard, why we have phantom
 devices here?

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1607 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
---
 src/mainboard/amd/quartet/mainboard.c | 11 +++++++----
 src/mainboard/amd/solo/auto.c         | 11 +++++++++--
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c
index 6c4d435ee1..917a2ac792 100644
--- a/src/mainboard/amd/quartet/mainboard.c
+++ b/src/mainboard/amd/quartet/mainboard.c
@@ -1,4 +1,3 @@
-
 #include <console/console.h>
 #include <device/device.h>
 #include <device/pci.h>
@@ -10,7 +9,6 @@
 #include "../../../northbridge/amd/amdk8/northbridge.h"
 #include "chip.h"
 
-
 unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0, 1, 2, 3,
@@ -28,15 +26,20 @@ static struct device_operations mainboard_operations = {
 static void enumerate(struct chip *chip)
 {
 	struct chip *child;
+
+	if (chip->control && chip->control->name) {
+ 		printk_debug("Enumerating: %s\n", chip->control->name);
+ 	}
+
 	dev_root.ops = &mainboard_operations;
 	chip->dev = &dev_root;
 	chip->bus = 0;
-	for(child = chip->children; child; child = child->next) {
+	for (child = chip->children; child; child = child->next) {
 		child->bus = &dev_root.link[0];
 	}
 }
+
 struct chip_control mainboard_amd_quartet_control = {
 	.enumerate = enumerate, 
 	.name      = "AMD Quartet mainboard ",
 };
-
diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c
index 93c21fcfdc..d893b5f8b7 100644
--- a/src/mainboard/amd/solo/auto.c
+++ b/src/mainboard/amd/solo/auto.c
@@ -102,20 +102,25 @@ static void main(void)
 		 .channel1 = {0, 0, 0, 0},
 		 }
 	};
+
 	int needs_reset;
 	enable_lapic();
 	init_timer();
+
 	if (cpu_init_detected()) {
 		asm("jmp __cpu_reset");
 	}
+
 	distinguish_cpu_resets();
 	if (!boot_cpu()) {
 		print_err("This LinuxBIOS image is built for UP only.\n");
 		stop_this_cpu();
 	}
+
 	pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
 	uart_init();
 	console_init();
+
 	setup_default_resource_map();
 	needs_reset = setup_coherent_ht_domain();
 	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
@@ -123,20 +128,22 @@ static void main(void)
 		print_info("ht reset -\r\n");
 		soft_reset();
 	}
+
 #if 0
 	print_pci_devices();
 #endif
+
 	enable_smbus();
+
 #if 0
 	dump_spd_registers(&cpu[0]);
 #endif
+
 	memreset_setup();
 	sdram_initialize(sizeof(cpu) / sizeof(cpu[0]), cpu);
 
 #if 0
 	dump_pci_devices();
-#endif
-#if 0
 	dump_pci_device(PCI_DEV(0, 0x18, 2));
 #endif