mb/intel/adlrvp: Add ADL-P ramstage mainboard code

List of changes:
1. Add devicetree.cb config parameters related to FSP-S UPD
2. Configure GPIO as per ADL-P RVP
3. Add files required for ramstage(ec.c, mainboard.c)
4. Add smihandler.c for SMM
5. Add devicetree changes as below
- USB OC PIN programing
- GPE configuration
- SATA port mapping
- LPSS configuration
- Audio configuration
- IA common SoC configuration
- EDP configuration
- TCSS USB configuration
- Enable S0ix

TEST=Able to boot ADL-P RVP without Chrome EC (using on-board EC) with
UART log over legacy UART0 port as 0x3f8 with NVME at RP9 reach till
depthcharge payload.

Change-Id: I120885956c88babfa09d24ce1079d49306919b8a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Subrata Banik 2020-10-10 15:53:33 +05:30 committed by Patrick Georgi
parent 522ba1ba27
commit 9b4f221026
9 changed files with 594 additions and 4 deletions

View File

@ -11,7 +11,12 @@ romstage-$(CONFIG_CHROMEOS) += chromeos.c
romstage-y += romstage_fsp_params.c
romstage-y += board_id.c
smm-y += smihandler.c
ramstage-$(CONFIG_CHROMEOS) += chromeos.c
ramstage-y += ec.c
ramstage-y += mainboard.c
ramstage-y += board_id.c
subdirs-y += variants/baseboard
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include

View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <acpi/acpi.h>
#include <ec/ec.h>
#include <ec/google/chromeec/ec.h>
#include <baseboard/ec.h>
void mainboard_ec_init(void)
{
const struct google_chromeec_event_info info = {
.log_events = MAINBOARD_EC_LOG_EVENTS,
.sci_events = MAINBOARD_EC_SCI_EVENTS,
.s3_wake_events = MAINBOARD_EC_S3_WAKE_EVENTS,
.s5_wake_events = MAINBOARD_EC_S5_WAKE_EVENTS,
.s0ix_wake_events = MAINBOARD_EC_S0IX_WAKE_EVENTS,
};
google_chromeec_events_init(&info, acpi_is_wakeup_s3());
}

View File

@ -0,0 +1,40 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <device/device.h>
#include <ec/ec.h>
#include <soc/gpio.h>
#include <vendorcode/google/chromeos/chromeos.h>
#include <smbios.h>
#include <stdint.h>
#include <string.h>
#include "board_id.h"
const char *smbios_system_sku(void)
{
static char sku_str[7] = "";
uint8_t sku_id = get_board_id();
snprintf(sku_str, sizeof(sku_str), "sku%u", sku_id);
return sku_str;
}
static void mainboard_init(void *chip_info)
{
variant_configure_gpio_pads();
if (CONFIG(EC_GOOGLE_CHROMEEC))
mainboard_ec_init();
}
static void mainboard_enable(struct device *dev)
{
dev->ops->acpi_inject_dsdt = chromeos_dsdt_generator;
}
struct chip_operations mainboard_ops = {
.init = mainboard_init,
.enable_dev = mainboard_enable,
};

View File

@ -0,0 +1,30 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <cpu/x86/smm.h>
#include <ec/google/chromeec/smm.h>
#include <intelblocks/smihandler.h>
#include <baseboard/ec.h>
void mainboard_smi_espi_handler(void)
{
if (!CONFIG(EC_GOOGLE_CHROMEEC))
return;
chromeec_smi_process_events();
}
void mainboard_smi_sleep(u8 slp_typ)
{
if (!CONFIG(EC_GOOGLE_CHROMEEC))
return;
chromeec_smi_sleep(slp_typ, MAINBOARD_EC_S3_WAKE_EVENTS, MAINBOARD_EC_S5_WAKE_EVENTS);
}
int mainboard_smi_apmc(u8 apmc)
{
if (CONFIG(EC_GOOGLE_CHROMEEC))
chromeec_smi_apmc(apmc, MAINBOARD_EC_SCI_EVENTS, MAINBOARD_EC_SMI_EVENTS);
return 0;
}

View File

@ -3,3 +3,5 @@
bootblock-y += early_gpio.c
romstage-y += memory.c
ramstage-y += gpio.c

View File

@ -4,6 +4,34 @@ chip soc/intel/alderlake
device lapic 0 on end
end
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "pmc_gpe0_dw0" = "GPP_B"
register "pmc_gpe0_dw1" = "GPP_D"
register "pmc_gpe0_dw2" = "GPP_E"
# FSP configuration
# Enable Speed Shift Technology/HWP support
register "speed_shift_enable" = "1"
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # Type-C Port1
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-C Port2
register "usb2_ports[2]" = "USB2_PORT_MID(OC3)" # Type-C Port3
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN
register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # Type-C Port4
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # FPS connector
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2
register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB3/2 Type A port3
register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port1
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port3
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
@ -41,6 +69,101 @@ chip soc/intel/alderlake
# Mark LAN CLK pins as unused as GbE 0:0x1f.6 is disabled below
register "PcieClkSrcUsage[6]" = "0xff"
register "SataSalpSupport" = "1"
register "SataPortsEnable" = "{
[0] = 1,
[1] = 1,
[2] = 1,
[3] = 1,
}"
register "SataPortsDevSlp" = "{
[0] = 1,
[1] = 1,
[2] = 1,
[3] = 1,
}"
# Enable EDP in PortA
register "DdiPortAConfig" = "1"
register "DdiPortBConfig" = "1"
# TCSS USB3
register "TcssAuxOri" = "0"
register "s0ix_enable" = "1"
register "SerialIoI2cMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci,
[PchSerialIoIndexI2C1] = PchSerialIoPci,
[PchSerialIoIndexI2C2] = PchSerialIoPci,
[PchSerialIoIndexI2C3] = PchSerialIoPci,
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
[PchSerialIoIndexI2C5] = PchSerialIoPci,
}"
register "SerialIoGSpiMode" = "{
[PchSerialIoIndexGSPI0] = PchSerialIoPci,
[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
[PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
[PchSerialIoIndexGSPI3] = PchSerialIoDisabled,
}"
register "SerialIoGSpiCsMode" = "{
[PchSerialIoIndexGSPI0] = 0,
[PchSerialIoIndexGSPI1] = 0,
[PchSerialIoIndexGSPI2] = 0,
[PchSerialIoIndexGSPI3] = 0,
}"
register "SerialIoGSpiCsState" = "{
[PchSerialIoIndexGSPI0] = 0,
[PchSerialIoIndexGSPI1] = 0,
[PchSerialIoIndexGSPI2] = 0,
[PchSerialIoIndexGSPI3] = 0,
}"
register "SerialIoUartMode" = "{
[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
[PchSerialIoIndexUART1] = PchSerialIoDisabled,
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
}"
# HD Audio
register "PchHdaDspEnable" = "1"
register "PchHdaAudioLinkHdaEnable" = "0"
register "PchHdaAudioLinkDmicEnable[0]" = "1"
register "PchHdaAudioLinkDmicEnable[1]" = "1"
register "PchHdaAudioLinkSndwEnable[0]" = "1"
register "PchHdaAudioLinkSndwEnable[1]" = "1"
# iDisp-Link T-Mode 0: 2T, 2: 4T, 3: 8T, 4: 16T
register "PchHdaIDispLinkTmode" = "2"
# iDisp-Link Freq 4: 96MHz, 3: 48MHz.
register "PchHdaIDispLinkFrequency" = "4"
# Not disconnected/enumerable
register "PchHdaIDispCodecDisconnect" = "0"
# Intel Common SoC Config
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
.i2c[0] = {
.speed = I2C_SPEED_FAST,
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
},
.i2c[2] = {
.speed = I2C_SPEED_FAST,
},
.i2c[3] = {
.speed = I2C_SPEED_FAST,
},
.i2c[5] = {
.speed = I2C_SPEED_FAST,
},
}"
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on end # Graphics
@ -107,7 +230,7 @@ chip soc/intel/alderlake
device pci 17.0 on end # SATA
device pci 19.0 off end # I2C4
device pci 19.1 on end # I2C5
device pci 19.2 on end # UART2
device pci 19.2 off end # UART2
device pci 1c.0 on end # RP1
device pci 1c.1 off end # RP2
device pci 1c.2 off end # RP3
@ -120,9 +243,9 @@ chip soc/intel/alderlake
device pci 1d.1 off end # RP10
device pci 1d.2 off end # RP11
device pci 1d.3 off end # RP12
device pci 1e.0 off end # UART0
device pci 1e.0 on end # UART0
device pci 1e.1 off end # UART1
device pci 1e.2 off end # GSPI0
device pci 1e.2 on end # GSPI0
device pci 1e.3 off end # GSPI1
device pci 1f.0 on end # eSPI
device pci 1f.1 on end # P2SB

View File

@ -0,0 +1,297 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <commonlib/helpers.h>
/* Pad configuration in ramstage*/
static const struct pad_config gpio_table[] = {
/* SSD1_PWREN CPU SSD1 */
PAD_CFG_GPO(GPP_D14, 1, PLTRST),
/* SSD1_RESET CPU SSD1 */
PAD_CFG_GPO(GPP_F20, 1, PLTRST),
/* BT_RF_KILL_N */
PAD_CFG_GPO(GPP_A13, 1, PLTRST),
/* WLAN RST# */
PAD_CFG_GPO(GPP_H2, 1, PLTRST),
/* WIFI_WAKE_N */
PAD_CFG_GPI_IRQ_WAKE(GPP_D13, NONE, DEEP, LEVEL, INVERT),
/* x4 PCIE slot1 PWREN */
PAD_CFG_GPO(GPP_H17, 0, PLTRST),
/* x4 PCIE slot 1 RESET */
PAD_CFG_GPO(GPP_F10, 1, PLTRST),
/* Retimer Force Power */
PAD_CFG_GPO(GPP_E4, 0, PLTRST),
/* PEG Slot RST# */
PAD_CFG_GPO(GPP_B2, 1, PLTRST),
/* M.2 SSD_2 Reset */
PAD_CFG_GPO(GPP_H0, 1, PLTRST),
/* CAM1-IRQ */
PAD_CFG_GPO(GPP_B23, 1, PLTRST),
/* CAM_STROBE */
PAD_CFG_GPO(GPP_B18, 0, PLTRST),
/* Audio Codec INT N */
PAD_CFG_GPI_APIC(GPP_H3, NONE, PLTRST, LEVEL, INVERT),
/* TCH PAD Power EN */
PAD_CFG_GPO(GPP_F7, 1, PLTRST),
/* THC1 SPI2 RST# */
PAD_CFG_GPO(GPP_F17, 1, PLTRST),
/* THC1_SPI2_INTB */
PAD_CFG_GPI_APIC(GPP_F18, NONE, PLTRST, EDGE_SINGLE, INVERT),
/* THC1_SPI2_INTB */
PAD_CFG_GPI(GPP_E17, NONE, PLTRST),
/* EC_SMI_N */
PAD_CFG_GPI_SMI(GPP_E7, NONE, PLTRST, EDGE_SINGLE, NONE),
/* EC_SLP_S0_CS_N */
PAD_CFG_GPO(GPP_F9, 1, PLTRST),
/* WIFI RF KILL */
PAD_CFG_GPO(GPP_E3, 1, PLTRST),
/* DISP_AUX_N_BIAS_GPIO */
PAD_CFG_GPO(GPP_E23, 1, PLTRST),
/* WWAN WAKE N*/
PAD_CFG_GPI_IRQ_WAKE(GPP_D18, NONE, DEEP, LEVEL, INVERT),
/* WWAN_DISABLE_N */
PAD_CFG_GPO(GPP_D15, 1, PLTRST),
/* WWAN_RST# */
PAD_CFG_GPO(GPP_E10, 1, PLTRST),
/* WWAN_PWR_EN */
PAD_CFG_GPO(GPP_E13, 1, DEEP),
/* WWAN_PERST# */
PAD_CFG_GPO(GPP_C5, 1, PLTRST),
/* PEG_SLOT_WAKE_N */
PAD_CFG_GPI(GPP_A20, NONE, PLTRST),
/* UART_BT_WAKE_N */
PAD_CFG_GPI_IRQ_WAKE(GPP_E0, NONE, DEEP, LEVEL, INVERT),
/* CAM CONN1 CLKEN */
PAD_CFG_GPO(GPP_H15, 1, PLTRST),
/* CPU SSD2 PWREN */
PAD_CFG_GPO(GPP_C2, 1, PLTRST),
/* CPU SSD2 RST# */
PAD_CFG_GPO(GPP_H1, 1, PLTRST),
/* Sata direct Power */
PAD_CFG_GPO(GPP_B4, 1, PLTRST),
/* THC0 SPI1 CLK */
PAD_CFG_NF(GPP_E11, NONE, DEEP, NF2),
/* THC0 SPI1 IO 1 */
PAD_CFG_NF(GPP_E12, NONE, DEEP, NF2),
/* THC0 SPI1 IO 2 */
PAD_CFG_NF(GPP_E1, NONE, DEEP, NF2),
/* THC0 SPI IO 3 */
PAD_CFG_NF(GPP_E2, NONE, DEEP, NF2),
/* THC1 SPI1 RSTB */
PAD_CFG_NF(GPP_E6, NONE, DEEP, NF2),
/* UART_RX(1) */
PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1),
/* UART_RX(2) */
PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
/* UART_RX(4) */
PAD_CFG_NF(GPP_T4, NONE, DEEP, NF1),
/* UART_RX(5) */
PAD_CFG_NF(GPP_T8, NONE, DEEP, NF1),
/* UART_RX(6) */
PAD_CFG_NF(GPP_T12, NONE, DEEP, NF1),
/* UART_TX(1) */
PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1),
/* UART_TX(2) */
PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
/* UART_TX(4) */
PAD_CFG_NF(GPP_T5, NONE, DEEP, NF1),
/* UART_TX(5) */
PAD_CFG_NF(GPP_T9, NONE, DEEP, NF1),
/* UART_TX(6) */
PAD_CFG_NF(GPP_T13, NONE, DEEP, NF1),
/* UART_RTS(1) */
PAD_CFG_NF(GPP_C14, NONE, DEEP, NF1),
/* UART_RTS(2) */
PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1),
/* UART_RTS(4) */
PAD_CFG_NF(GPP_T6, NONE, DEEP, NF1),
/* UART_RTS(5) */
PAD_CFG_NF(GPP_T10, NONE, DEEP, NF1),
/* UART_RTS(6) */
PAD_CFG_NF(GPP_T14, NONE, DEEP, NF1),
/* UART_CTS(1) */
PAD_CFG_NF(GPP_C15, NONE, DEEP, NF1),
/* UART_CTS(2) */
PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1),
/* UART_CTS(4) */
PAD_CFG_NF(GPP_T7, NONE, DEEP, NF1),
/* UART_CTS(5) */
PAD_CFG_NF(GPP_T11, NONE, DEEP, NF1),
/* UART_CTS(6) */
PAD_CFG_NF(GPP_T15, NONE, DEEP, NF1),
/* SPI_MOSI(1) */
PAD_CFG_NF(GPP_B22, NONE, DEEP, NF1),
/* SPI_MOSI(2) */
PAD_CFG_NF(GPP_D12, NONE, DEEP, NF2),
/* SPI_MIS0(0) */
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
/* SPI_MIS0(1) */
PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1),
/* SPI_MIS0(2) */
PAD_CFG_NF(GPP_D11, NONE, DEEP, NF2),
/* SPI_CLK(0) */
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
/* SPI_CLK(1) */
PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1),
/* SPI_CLK(2) */
PAD_CFG_NF(GPP_D10, NONE, DEEP, NF2),
/* SPI_CS(0, 0) */
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
/* SPI_CS(0, 1) */
PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),
/* SPI_CS(1, 0) */
PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),
/* SPI_CS(2, 0) */
PAD_CFG_NF(GPP_D9, NONE, DEEP, NF2),
/* I2C_SCL(0) */
PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
/* I2C_SCL(1) */
PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
/* I2C_SCL(2) */
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
/* I2C_SCL(3) */
PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),
/* I2C_SCL(5) */
PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
/* I2C_SCL(6) */
PAD_CFG_NF(GPP_T1, NONE, DEEP, NF1),
/* I2C_SCL(7) */
PAD_CFG_NF(GPP_T3, NONE, DEEP, NF1),
/* I2C_SDA(0) */
PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
/* I2C_SDA(1) */
PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
/* I2C_SDA(2) */
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
/* I2C_SDA(3) */
PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),
/* I2C_SDA(5) */
PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
/* I2C_SDA(6) */
PAD_CFG_NF(GPP_T0, NONE, DEEP, NF1),
/* I2C_SDA(7) */
PAD_CFG_NF(GPP_T2, NONE, DEEP, NF1),
/* I2S0_SCLK */
PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),
/* I2S0_SFRM */
PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),
/* I2S0_TXD */
PAD_CFG_NF(GPP_R2, NONE, DEEP, NF2),
/* I2S0_RXD */
PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),
/* I2S1_SCLK */
PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1),
/* I2S1_SFRM */
PAD_CFG_NF(GPP_R5, NONE, DEEP, NF2),
/* I2S1_TXD */
PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2),
/* I2S1_RXD */
PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2),
/* I2S2_SCLK */
PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1),
/* I2S2_SFRM */
PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
/* I2S2_TXD */
PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
/* I2S2_RXD */
PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
/* I2S_MCLK1_OUT */
PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
/* I2S_MCLK2_INOUT */
PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1),
/* SNDW1_CLK */
PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1),
/* SNDW1_DATA */
PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1),
/* SNDW2_CLK */
PAD_CFG_NF(GPP_S2, NONE, DEEP, NF1),
/* SNDW2_DATA */
PAD_CFG_NF(GPP_S3, NONE, DEEP, NF1),
/* SNDW3_CLK */
PAD_CFG_NF(GPP_S4, NONE, DEEP, NF1),
/* SNDW3_DATA */
PAD_CFG_NF(GPP_S5, NONE, DEEP, NF1),
/* SNDW4_CLK */
PAD_CFG_NF(GPP_S6, NONE, DEEP, NF1),
/* SNDW4_DATA */
PAD_CFG_NF(GPP_S7, NONE, DEEP, NF1),
/* SMB_CLK */
PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
/* SMB_DATA */
PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
/* SATADevSlpPin to GPIO pin mapping */
PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),
/* SATA DIRECT DEVSLP*/
PAD_CFG_NF(GPP_H12, NONE, DEEP, NF5),
/* SATA LED pin */
PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
/* USB2 OC0 pins */
PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
/* USB2 OC1 pins */
PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1),
/* USB2 OC2 pins */
PAD_CFG_NF(GPP_A15, NONE, DEEP, NF1),
/* USB2 OC3 pins */
PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
/* GPIO pin for PCIE SRCCLKREQB */
PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H10, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H11, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H19, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
/* DDP1/2/3/4/A/B/C CTRLCLK and CTRLDATA pins */
PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_E19, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_E22, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_A21, NONE, DEEP, NF2),
PAD_CFG_NF(GPP_A22, NONE, DEEP, NF2),
/* IMGCLKOUT */
PAD_CFG_NF(GPP_D4, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H20, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H21, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H22, NONE, DEEP, NF1),
PAD_CFG_NF(GPP_H23, NONE, DEEP, NF1),
};
void variant_configure_gpio_pads(void)
{
gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
}
static const struct cros_gpio cros_gpios[] = {
CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME),
};
const struct cros_gpio *variant_cros_gpios(size_t *num)
{
*num = ARRAY_SIZE(cros_gpios);
return cros_gpios;
}

View File

@ -0,0 +1,73 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef __BASEBOARD_EC_H__
#define __BASEBOARD_EC_H__
#include <ec/ec.h>
#include <ec/google/chromeec/ec_commands.h>
#include <baseboard/gpio.h>
#define MAINBOARD_EC_SCI_EVENTS \
(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))
#define MAINBOARD_EC_SMI_EVENTS \
(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED))
/* EC can wake from S5 with lid or power button */
#define MAINBOARD_EC_S5_WAKE_EVENTS \
(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON))
/*
* EC can wake from S3 with lid or power button or key press or
* mode change event.
*/
#define MAINBOARD_EC_S3_WAKE_EVENTS \
(MAINBOARD_EC_S5_WAKE_EVENTS |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_MODE_CHANGE))
#define MAINBOARD_EC_S0IX_WAKE_EVENTS (MAINBOARD_EC_S3_WAKE_EVENTS)
/* Log EC wake events plus EC shutdown events */
#define MAINBOARD_EC_LOG_EVENTS \
(EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN) |\
EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC))
/*
* ACPI related definitions for ASL code.
*/
/* Enable EC backed ALS device in ACPI */
#define EC_ENABLE_ALS_DEVICE
/* Enable EC sync interrupt, EC_SYNC_IRQ is defined in baseboard/gpio.h */
#define EC_ENABLE_SYNC_IRQ
/* Enable EC backed PD MCU device in ACPI */
#define EC_ENABLE_PD_MCU_DEVICE
/* Enable LID switch and provide wake pin for EC */
#define EC_ENABLE_LID_SWITCH
#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE
#define SIO_EC_MEMMAP_ENABLE /* EC Memory Map Resources */
#define SIO_EC_HOST_ENABLE /* EC Host Interface Resources */
#define SIO_EC_ENABLE_PS2K /* Enable PS/2 Keyboard */
#endif /* __BASEBOARD_EC_H__ */

View File

@ -20,7 +20,8 @@ enum adl_boardid {
/* The next set of functions return the gpio table and fill in the number of
* entries for each table. */
const struct cros_gpio *variant_cros_gpios(size_t *num);
/* Functions to configure GPIO as per variant schematics */
void variant_configure_gpio_pads(void);
void variant_configure_early_gpio_pads(void);
size_t variant_memory_sku(void);