From 9c27dc8d5683f8a09f10e249cbd577058f1da15c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michael=20Niew=C3=B6hner?= Date: Mon, 21 Dec 2020 03:46:58 +0100 Subject: [PATCH] mb/intel/glkrvp: do UART pad configuration at board-level MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early UART gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I80369ab70d5510cb4f388f3029119e7148361af4 Signed-off-by: Michael Niewöhner Reviewed-on: https://review.coreboot.org/c/coreboot/+/49435 Reviewed-by: Angel Pons Tested-by: build bot (Jenkins) --- src/mainboard/intel/glkrvp/bootblock.c | 6 +++++- src/mainboard/intel/glkrvp/variants/baseboard/gpio.c | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/src/mainboard/intel/glkrvp/bootblock.c b/src/mainboard/intel/glkrvp/bootblock.c index 577dae507d..0cbf3e62c2 100644 --- a/src/mainboard/intel/glkrvp/bootblock.c +++ b/src/mainboard/intel/glkrvp/bootblock.c @@ -6,12 +6,16 @@ #include #include -void bootblock_mainboard_init(void) +void bootblock_mainboard_early_init(void) { const struct pad_config *pads; size_t num; pads = variant_early_gpio_table(&num); gpio_configure_pads(pads, num); +} + +void bootblock_mainboard_init(void) +{ mainboard_ec_init(); } diff --git a/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c b/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c index 28efde9bdb..9a8188ba5d 100644 --- a/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c +++ b/src/mainboard/intel/glkrvp/variants/baseboard/gpio.c @@ -237,6 +237,8 @@ static const struct pad_config early_gpio_table[] = { PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_177, UP_20K, DEEP, NF1), /* SMB_CLK */ PAD_CFG_NF_IOSTANDBY_IGNORE(GPIO_178, UP_20K, DEEP, NF1), /* SMB_DATA */ PAD_NC(GPIO_154, NONE), /* LPC_CLKRUNB -- NC for eSPI */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, UP_20K, DEEP, NF1, HIZCRx1, DISPUPD),/* LPSS_UART2_RXD */ + PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, UP_20K, DEEP, NF1, TxLASTRxE, DISPUPD),/* LPSS_UART2_TXD */ }; const struct pad_config * __weak