intel/kunimitsu: USB Phy settings and Skip UART2 init in FSP
FSP 1.7.0 provides UPD to configure USB phy settings update the same for kunimitsu. FSP 1.7.0 also provides UPD to indicate FSP not to reinitialise UART2 controller during MemoryInit. BRANCH=none BUG=chrome-os-partner:45684,chrome-os-partner:41374,chrome-os-partner:42284 TEST=build for Kunimitsu, boot on FAB3, Also checked for Boot from USB, Boot from eMMC, USB Audio, Onboard Audio, Touch, Wifi, S3 entry/resume CQ-DEPEND=CL:303661 Change-Id: Ie0a545c954f472cc822b63786d40399ec93d5166 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 90296e04942c70d972c225fc75dfab6de44d10ed Original-Change-Id: If79e81ef3323e782e96db307d89a01c14174b435 Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/304032 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/12145 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This commit is contained in:
parent
952cb03b9e
commit
9cd8e5aebf
|
@ -60,11 +60,29 @@ chip soc/intel/skylake
|
|||
register "PortUsb20Enable[6]" = "1" # Camera
|
||||
register "PortUsb20Enable[8]" = "1" # Type-A Port (board)
|
||||
|
||||
#USB Per Port HS Preemphasis Bias
|
||||
register "Usb2AfePetxiset" = "{0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07}"
|
||||
#USB Per Port HS Transmitter Bias
|
||||
register "Usb2AfeTxiset" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}"
|
||||
#USB Per Port HS Transmitter Emphasis
|
||||
register "Usb2AfePredeemp" = "{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03}"
|
||||
#USB Per Port Half Bit Pre-emphasis
|
||||
register "Usb2AfePehalfbit" = "{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}"
|
||||
|
||||
register "PortUsb30Enable[0]" = "1" # Type-C Port 1
|
||||
register "PortUsb30Enable[1]" = "1" # Type-C Port 2
|
||||
register "PortUsb30Enable[2]" = "1" # Type-A Port (card)
|
||||
register "PortUsb30Enable[3]" = "1" # Type-A Port (board)
|
||||
|
||||
#Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
|
||||
register "Usb3HsioTxDeEmphEnable" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}"
|
||||
#USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
|
||||
register "Usb3HsioTxDeEmph" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}"
|
||||
#Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
|
||||
register "Usb3HsioTxDownscaleAmpEnable" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}"
|
||||
#USB 3.0 TX Output Downscale Amplitude Adjustment
|
||||
register "Usb3HsioTxDownscaleAmp" = "{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}"
|
||||
|
||||
# Must leave UART0 enabled or SD/eMMC will not work as PCI
|
||||
register "SerialIoDevMode" = "{ \
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci, \
|
||||
|
@ -77,7 +95,7 @@ chip soc/intel/skylake
|
|||
[PchSerialIoIndexSpi1] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexUart0] = PchSerialIoPci, \
|
||||
[PchSerialIoIndexUart1] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexUart2] = PchSerialIoPci, \
|
||||
[PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
|
||||
}"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
|
|
Loading…
Reference in New Issue