From 9fe4d797a37671a65053add3f7cca27397db0b9b Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Sat, 16 Jan 2010 17:53:38 +0000 Subject: [PATCH] coreboot used to have two different "APIs" for memory accesses: read32(unsigned long addr) vs readl(void *addr) and write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr) read32 was only available in __PRE_RAM__ stage, while readl was used in stage2. Some unclean implementations then made readl available to __PRE_RAM__ too which results in really messy includes and code. This patch fixes all code to use the read32/write32 variant, so that we can remove readl/writel in another patch. Signed-off-by: Stefan Reinauer Acked-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/arch/i386/include/arch/io.h | 40 ++++++++ src/arch/i386/include/arch/romcc_io.h | 3 +- src/arch/i386/lib/console.c | 2 +- src/arch/i386/lib/printk_init.c | 4 +- src/lib/usbdebug_direct.c | 92 +++++++++---------- src/mainboard/amd/db800/cache_as_ram_auto.c | 1 + .../artecgroup/dbe61/cache_as_ram_auto.c | 1 + .../msm800sev/cache_as_ram_auto.c | 1 + .../iei/pcisa-lx-800-r10/cache_as_ram_auto.c | 1 + src/mainboard/intel/eagleheights/auto.c | 22 ++--- src/mainboard/intel/eagleheights/mptable.c | 16 ++-- .../lippert/roadrunner-lx/cache_as_ram_auto.c | 1 + .../spacerunner-lx/cache_as_ram_auto.c | 1 + .../pcengines/alix1c/cache_as_ram_auto.c | 1 + src/northbridge/amd/gx1/northbridge.c | 4 +- src/northbridge/amd/gx1/raminit.c | 4 +- src/southbridge/amd/amd8111/amd8111_nic.c | 6 +- src/southbridge/amd/cs5530/cs5530_vga.c | 54 +++++------ src/southbridge/amd/cs5536/cs5536.c | 22 ++--- src/southbridge/amd/sb600/sb600_hda.c | 18 ++-- src/southbridge/amd/sb600/sb600_sata.c | 24 ++--- src/southbridge/amd/sb600/sb600_usb.c | 8 +- .../broadcom/bcm5785/bcm5785_sata.c | 10 +- .../intel/i82801gx/i82801gx_azalia.c | 22 ++--- .../intel/i82801gx/i82801gx_usb_debug.c | 5 +- .../intel/i82801gx/i82801gx_usb_ehci.c | 4 +- src/southbridge/nvidia/ck804/ck804_nic.c | 10 +- src/southbridge/nvidia/mcp55/mcp55_aza.c | 26 +++--- src/southbridge/nvidia/mcp55/mcp55_nic.c | 28 +++--- src/southbridge/sis/sis966/sis966_aza.c | 32 +++---- src/southbridge/sis/sis966/sis966_nic.c | 18 ++-- src/southbridge/sis/sis966/sis966_usb2.c | 2 +- 32 files changed, 264 insertions(+), 219 deletions(-) diff --git a/src/arch/i386/include/arch/io.h b/src/arch/i386/include/arch/io.h index 59af68c203..e2e15ec762 100644 --- a/src/arch/i386/include/arch/io.h +++ b/src/arch/i386/include/arch/io.h @@ -136,6 +136,14 @@ static inline void insl(uint16_t port, void *addr, unsigned long count) ); } +/* XXX XXX XXX This is a story from the evil API from hell XXX XXX XXX + * We have different functions for memory access in pre-ram stage and ram + * stage. Those in pre-ram stage are called write32 and expect the address + * first and the address as a pointer type. Those in ram stage are called + * writel and expect the datum first and the address as an integer type. + * Until all code is checked and fixed, I'll add both versions here now. + */ + static inline void writeb(uint8_t b, volatile void *addr) { *(volatile uint8_t *) addr = b; @@ -166,5 +174,37 @@ static inline uint32_t readl(const volatile void *addr) return *(volatile uint32_t *) addr; } +#if !defined(__PRE_RAM__) +static inline __attribute__((always_inline)) uint8_t read8(unsigned long addr) +{ + return *((volatile uint8_t *)(addr)); +} + +static inline __attribute__((always_inline)) uint16_t read16(unsigned long addr) +{ + return *((volatile uint16_t *)(addr)); +} + +static inline __attribute__((always_inline)) uint32_t read32(unsigned long addr) +{ + return *((volatile uint32_t *)(addr)); +} + +static inline __attribute__((always_inline)) void write8(unsigned long addr, uint8_t value) +{ + *((volatile uint8_t *)(addr)) = value; +} + +static inline __attribute__((always_inline)) void write16(unsigned long addr, uint16_t value) +{ + *((volatile uint16_t *)(addr)) = value; +} + +static inline __attribute__((always_inline)) void write32(unsigned long addr, uint32_t value) +{ + *((volatile uint32_t *)(addr)) = value; +} +#endif + #endif diff --git a/src/arch/i386/include/arch/romcc_io.h b/src/arch/i386/include/arch/romcc_io.h index fca27c4ec6..738af667eb 100644 --- a/src/arch/i386/include/arch/romcc_io.h +++ b/src/arch/i386/include/arch/romcc_io.h @@ -3,7 +3,7 @@ #include - +#ifdef __PRE_RAM__ static inline __attribute__((always_inline)) uint8_t read8(unsigned long addr) { return *((volatile uint8_t *)(addr)); @@ -33,6 +33,7 @@ static inline __attribute__((always_inline)) void write32(unsigned long addr, ui { *((volatile uint32_t *)(addr)) = value; } +#endif #if CONFIG_MMCONF_SUPPORT diff --git a/src/arch/i386/lib/console.c b/src/arch/i386/lib/console.c index 2bab6032d3..b5d3c1bffe 100644 --- a/src/arch/i386/lib/console.c +++ b/src/arch/i386/lib/console.c @@ -10,7 +10,7 @@ #define COREBOOT_EXTRA_VERSION "" #endif -static void console_init(void) +void console_init(void) { static const char console_test[] = "\r\n\r\ncoreboot-" diff --git a/src/arch/i386/lib/printk_init.c b/src/arch/i386/lib/printk_init.c index f0ad2551bb..dd4672736b 100644 --- a/src/arch/i386/lib/printk_init.c +++ b/src/arch/i386/lib/printk_init.c @@ -18,6 +18,7 @@ */ #include +#include #include #include #include @@ -32,9 +33,6 @@ int console_loglevel = CONFIG_DEFAULT_CONSOLE_LOGLEVEL; #define console_loglevel CONFIG_DEFAULT_CONSOLE_LOGLEVEL #endif -void console_tx_byte(unsigned char byte); -int do_printk(int msg_level, const char *fmt, ...); - void console_tx_byte(unsigned char byte) { if (byte == '\n') diff --git a/src/lib/usbdebug_direct.c b/src/lib/usbdebug_direct.c index 1fd1113867..c9fe68ecfe 100644 --- a/src/lib/usbdebug_direct.c +++ b/src/lib/usbdebug_direct.c @@ -83,7 +83,7 @@ static int dbgp_wait_until_complete(struct ehci_dbg_port *ehci_debug) unsigned ctrl; int loop = 0x100000; do { - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); /* Stop when the transaction is finished */ if (ctrl & DBGP_DONE) break; @@ -94,7 +94,7 @@ static int dbgp_wait_until_complete(struct ehci_dbg_port *ehci_debug) /* Now that we have observed the completed transaction, * clear the done bit. */ - writel(ctrl | DBGP_DONE, &ehci_debug->control); + write32(&ehci_debug->control, ctrl | DBGP_DONE); return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl); } @@ -119,9 +119,9 @@ static int dbgp_wait_until_done(struct ehci_dbg_port *ehci_debug, unsigned ctrl) int loop = 3; retry: - writel(ctrl | DBGP_GO, &ehci_debug->control); + write32(&ehci_debug->control, ctrl | DBGP_GO); ret = dbgp_wait_until_complete(ehci_debug); - pids = readl(&ehci_debug->pids); + pids = read32(&ehci_debug->pids); lpid = DBGP_PID_GET(pids); if (ret < 0) @@ -151,8 +151,8 @@ static void dbgp_set_data(struct ehci_dbg_port *ehci_debug, const void *buf, int lo |= bytes[i] << (8*i); for (; i < 8 && i < size; i++) hi |= bytes[i] << (8*(i - 4)); - writel(lo, &ehci_debug->data03); - writel(hi, &ehci_debug->data47); + write32(&ehci_debug->data03, lo); + write32(&ehci_debug->data47, hi); } static void dbgp_get_data(struct ehci_dbg_port *ehci_debug, void *buf, int size) @@ -160,8 +160,8 @@ static void dbgp_get_data(struct ehci_dbg_port *ehci_debug, void *buf, int size) unsigned char *bytes = buf; unsigned lo, hi; int i; - lo = readl(&ehci_debug->data03); - hi = readl(&ehci_debug->data47); + lo = read32(&ehci_debug->data03); + hi = read32(&ehci_debug->data47); for (i = 0; i < 4 && i < size; i++) bytes[i] = (lo >> (8*i)) & 0xff; for (; i < 8 && i < size; i++) @@ -177,17 +177,17 @@ static int dbgp_bulk_write(struct ehci_dbg_port *ehci_debug, unsigned devnum, un addr = DBGP_EPADDR(devnum, endpoint); - pids = readl(&ehci_debug->pids); + pids = read32(&ehci_debug->pids); pids = DBGP_PID_UPDATE(pids, USB_PID_OUT); - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); ctrl = DBGP_LEN_UPDATE(ctrl, size); ctrl |= DBGP_OUT; ctrl |= DBGP_GO; dbgp_set_data(ehci_debug, bytes, size); - writel(addr, &ehci_debug->address); - writel(pids, &ehci_debug->pids); + write32(&ehci_debug->address, addr); + write32(&ehci_debug->pids, pids); ret = dbgp_wait_until_done(ehci_debug, ctrl); if (ret < 0) { @@ -211,16 +211,16 @@ static int dbgp_bulk_read(struct ehci_dbg_port *ehci_debug, unsigned devnum, uns addr = DBGP_EPADDR(devnum, endpoint); - pids = readl(&ehci_debug->pids); + pids = read32(&ehci_debug->pids); pids = DBGP_PID_UPDATE(pids, USB_PID_IN); - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); ctrl = DBGP_LEN_UPDATE(ctrl, size); ctrl &= ~DBGP_OUT; ctrl |= DBGP_GO; - writel(addr, &ehci_debug->address); - writel(pids, &ehci_debug->pids); + write32(&ehci_debug->address, addr); + write32(&ehci_debug->pids, pids); ret = dbgp_wait_until_done(ehci_debug, ctrl); if (ret < 0) return ret; @@ -256,15 +256,15 @@ static int dbgp_control_msg(struct ehci_dbg_port *ehci_debug, unsigned devnum, i pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP); addr = DBGP_EPADDR(devnum, 0); - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); ctrl = DBGP_LEN_UPDATE(ctrl, sizeof(req)); ctrl |= DBGP_OUT; ctrl |= DBGP_GO; /* Send the setup message */ dbgp_set_data(ehci_debug, &req, sizeof(req)); - writel(addr, &ehci_debug->address); - writel(pids, &ehci_debug->pids); + write32(&ehci_debug->address, addr); + write32(&ehci_debug->pids, pids); ret = dbgp_wait_until_done(ehci_debug, ctrl); if (ret < 0) return ret; @@ -282,25 +282,25 @@ static int ehci_reset_port(struct ehci_regs *ehci_regs, int port) int loop; /* Reset the usb debug port */ - portsc = readl(&ehci_regs->port_status[port - 1]); + portsc = read32(&ehci_regs->port_status[port - 1]); portsc &= ~PORT_PE; portsc |= PORT_RESET; - writel(portsc, &ehci_regs->port_status[port - 1]); + write32(&ehci_regs->port_status[port - 1], portsc); delay = HUB_ROOT_RESET_TIME; for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT; delay_time += delay) { dbgp_mdelay(delay); - portsc = readl(&ehci_regs->port_status[port - 1]); + portsc = read32(&ehci_regs->port_status[port - 1]); if (portsc & PORT_RESET) { /* force reset to complete */ loop = 2; - writel(portsc & ~(PORT_RWC_BITS | PORT_RESET), - &ehci_regs->port_status[port - 1]); + write32(&ehci_regs->port_status[port - 1], + portsc & ~(PORT_RWC_BITS | PORT_RESET)); do { dbgp_mdelay(delay); - portsc = readl(&ehci_regs->port_status[port - 1]); + portsc = read32(&ehci_regs->port_status[port - 1]); delay_time += delay; } while ((portsc & PORT_RESET) && (--loop > 0)); if (!loop) { @@ -329,7 +329,7 @@ static int ehci_wait_for_port(struct ehci_regs *ehci_regs, int port) int ret, reps; for (reps = 0; reps < 3; reps++) { dbgp_mdelay(100); - status = readl(&ehci_regs->status); + status = read32(&ehci_regs->status); if (status & STS_PCD) { ret = ehci_reset_port(ehci_regs, port); if (ret == 0) @@ -366,7 +366,7 @@ static void usbdebug_direct_init(unsigned ehci_bar, unsigned offset, struct ehci unsigned playtimes = 3; ehci_caps = (struct ehci_caps *)ehci_bar; - ehci_regs = (struct ehci_regs *)(ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase))); + ehci_regs = (struct ehci_regs *)(ehci_bar + HC_LENGTH(read32(&ehci_caps->hc_capbase))); ehci_debug = (struct ehci_dbg_port *)(ehci_bar + offset); info->ehci_debug = (void *)0; @@ -375,7 +375,7 @@ try_next_time: port_map_tried = 0; try_next_port: - hcs_params = readl(&ehci_caps->hcs_params); + hcs_params = read32(&ehci_caps->hcs_params); debug_port = HCS_DEBUG_PORT(hcs_params); n_ports = HCS_N_PORTS(hcs_params); @@ -385,7 +385,7 @@ try_next_port: #if 1 for (i = 1; i <= n_ports; i++) { - portsc = readl(&ehci_regs->port_status[i-1]); + portsc = read32(&ehci_regs->port_status[i-1]); dbgp_printk("PORTSC #%d: %08x\n", i, portsc); } #endif @@ -400,11 +400,11 @@ try_next_port: /* Reset the EHCI controller */ loop = 10; - cmd = readl(&ehci_regs->command); + cmd = read32(&ehci_regs->command); cmd |= CMD_RESET; - writel(cmd, &ehci_regs->command); + write32(&ehci_regs->command, cmd); do { - cmd = readl(&ehci_regs->command); + cmd = read32(&ehci_regs->command); } while ((cmd & CMD_RESET) && (--loop > 0)); if(!loop) @@ -413,24 +413,24 @@ try_next_port: dbgp_printk("EHCI controller reset successfully.\n"); /* Claim ownership, but do not enable yet */ - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); ctrl |= DBGP_OWNER; ctrl &= ~(DBGP_ENABLED | DBGP_INUSE); - writel(ctrl, &ehci_debug->control); + write32(&ehci_debug->control, ctrl); /* Start the ehci running */ - cmd = readl(&ehci_regs->command); + cmd = read32(&ehci_regs->command); cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET); cmd |= CMD_RUN; - writel(cmd, &ehci_regs->command); + write32(&ehci_regs->command, cmd); /* Ensure everything is routed to the EHCI */ - writel(FLAG_CF, &ehci_regs->configured_flag); + write32(&ehci_regs->configured_flag, FLAG_CF); /* Wait until the controller is no longer halted */ loop = 10; do { - status = readl(&ehci_regs->status); + status = read32(&ehci_regs->status); } while ((status & STS_HALT) && (--loop>0)); if(!loop) { @@ -448,21 +448,21 @@ try_next_port: dbgp_printk("EHCI done waiting for port.\n"); /* Enable the debug port */ - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); ctrl |= DBGP_CLAIM; - writel(ctrl, &ehci_debug->control); - ctrl = readl(&ehci_debug->control); + write32(&ehci_debug->control, ctrl); + ctrl = read32(&ehci_debug->control); if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) { dbgp_printk("No device in EHCI debug port.\n"); - writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control); + write32(&ehci_debug->control, ctrl & ~DBGP_CLAIM); goto err; } dbgp_printk("EHCI debug port enabled.\n"); /* Completely transfer the debug device to the debug controller */ - portsc = readl(&ehci_regs->port_status[debug_port - 1]); + portsc = read32(&ehci_regs->port_status[debug_port - 1]); portsc &= ~PORT_PE; - writel(portsc, &ehci_regs->port_status[debug_port - 1]); + write32(&ehci_regs->port_status[debug_port - 1], portsc); dbgp_mdelay(100); @@ -529,9 +529,9 @@ try_next_port: return; err: /* Things didn't work so remove my claim */ - ctrl = readl(&ehci_debug->control); + ctrl = read32(&ehci_debug->control); ctrl &= ~(DBGP_CLAIM | DBGP_OUT); - writel(ctrl, &ehci_debug->control); + write32(&ehci_debug->control, ctrl); next_debug_port: port_map_tried |= (1<<(debug_port-1)); diff --git a/src/mainboard/amd/db800/cache_as_ram_auto.c b/src/mainboard/amd/db800/cache_as_ram_auto.c index f0e37d7306..5ee6dbb748 100644 --- a/src/mainboard/amd/db800/cache_as_ram_auto.c +++ b/src/mainboard/amd/db800/cache_as_ram_auto.c @@ -19,6 +19,7 @@ */ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c b/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c index 4679ab44f3..0b3721a5b7 100644 --- a/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c +++ b/src/mainboard/artecgroup/dbe61/cache_as_ram_auto.c @@ -19,6 +19,7 @@ */ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c b/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c index 4282449945..70fa935a8d 100644 --- a/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c +++ b/src/mainboard/digitallogic/msm800sev/cache_as_ram_auto.c @@ -1,4 +1,5 @@ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c b/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c index d1c438ba35..24a350b92b 100644 --- a/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c +++ b/src/mainboard/iei/pcisa-lx-800-r10/cache_as_ram_auto.c @@ -19,6 +19,7 @@ */ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/mainboard/intel/eagleheights/auto.c b/src/mainboard/intel/eagleheights/auto.c index 47043a9067..d928de5c56 100644 --- a/src/mainboard/intel/eagleheights/auto.c +++ b/src/mainboard/intel/eagleheights/auto.c @@ -133,22 +133,22 @@ void early_config(void) { pci_write_config32(PCI_DEV(0, 0x1F, 0), RCBA, DEFAULT_RCBA | 1); /* Disable watchdog */ - gcs = readl(DEFAULT_RCBA + RCBA_GCS); + gcs = read32(DEFAULT_RCBA + RCBA_GCS); gcs |= (1 << 5); /* No reset */ - writel(gcs, DEFAULT_RCBA + RCBA_GCS); + write32(DEFAULT_RCBA + RCBA_GCS, gcs); /* Configure PCIe port B as 4x */ - rpc = readl(DEFAULT_RCBA + RCBA_RPC); + rpc = read32(DEFAULT_RCBA + RCBA_RPC); rpc |= (3 << 0); - writel(rpc, DEFAULT_RCBA + RCBA_RPC); + write32(DEFAULT_RCBA + RCBA_RPC, rpc); /* Disable Modem, Audio, PCIe ports 2/3/4 */ - fd = readl(DEFAULT_RCBA + RCBA_FD); + fd = read32(DEFAULT_RCBA + RCBA_FD); fd |= (1 << 19) | (1 << 18) | (1 << 17) | (1 << 6) | (1 << 5); - writel(fd, DEFAULT_RCBA + RCBA_FD); + write32(DEFAULT_RCBA + RCBA_FD, fd); /* Enable HPET */ - writel((1 << 7), DEFAULT_RCBA + RCBA_HPTC); + write32(DEFAULT_RCBA + RCBA_HPTC, (1 << 7)); /* Improve interrupt routing * D31:F2 SATA INTB# -> PIRQD @@ -160,10 +160,10 @@ void early_config(void) { * D28:F0 PCIe Port 1 INTA# -> PIRQE */ - writew(0x0230, DEFAULT_RCBA + RCBA_D31IR); - writew(0x3210, DEFAULT_RCBA + RCBA_D30IR); - writew(0x3237, DEFAULT_RCBA + RCBA_D29IR); - writew(0x3214, DEFAULT_RCBA + RCBA_D28IR); + write16(DEFAULT_RCBA + RCBA_D31IR, 0x0230); + write16(DEFAULT_RCBA + RCBA_D30IR, 0x3210); + write16(DEFAULT_RCBA + RCBA_D29IR, 0x3237); + write16(DEFAULT_RCBA + RCBA_D28IR, 0x3214); /* Setup sata mode */ pci_write_config8(PCI_DEV(0, 0x1F, 2), SATA_MAP, (SATA_MODE_AHCI << 6) | (0 << 0)); diff --git a/src/mainboard/intel/eagleheights/mptable.c b/src/mainboard/intel/eagleheights/mptable.c index 7f2ca352d2..ac72aa0714 100644 --- a/src/mainboard/intel/eagleheights/mptable.c +++ b/src/mainboard/intel/eagleheights/mptable.c @@ -234,10 +234,10 @@ void *smp_write_config_table(void *v) /* PCIe Port B */ for(i = 0; i < 4; i++) { - pin = (readl(rcba + RCBA_D28IP) >> (i * 4)) & 0x0F; + pin = (read32(rcba + RCBA_D28IP) >> (i * 4)) & 0x0F; if(pin > 0) { pin -= 1; - route = PIRQ_A + ((readw(rcba + RCBA_D28IR) >> (pin * 4)) & 0x07); + route = PIRQ_A + ((read16(rcba + RCBA_D28IR) >> (pin * 4)) & 0x07); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(28, pin), IO_APIC0, route); } } @@ -245,20 +245,20 @@ void *smp_write_config_table(void *v) /* USB 1.1 : device 29, function 0, 1 */ for(i = 0; i < 2; i++) { - pin = (readl(rcba + RCBA_D29IP) >> (i * 4)) & 0x0F; + pin = (read32(rcba + RCBA_D29IP) >> (i * 4)) & 0x0F; if(pin > 0) { pin -= 1; - route = PIRQ_A + ((readw(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07); + route = PIRQ_A + ((read16(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(29, pin), IO_APIC0, route); } } /* USB 2.0 : device 29, function 7 */ - pin = (readl(rcba + RCBA_D29IP) >> (7 * 4)) & 0x0F; + pin = (read32(rcba + RCBA_D29IP) >> (7 * 4)) & 0x0F; if(pin > 0) { pin -= 1; - route = PIRQ_A + ((readw(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07); + route = PIRQ_A + ((read16(rcba + RCBA_D29IR) >> (pin * 4)) & 0x07); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(29, pin), IO_APIC0, route); } @@ -267,10 +267,10 @@ void *smp_write_config_table(void *v) Performance counters : device 31 function 4 */ for(i = 2; i < 5; i++) { - pin = (readl(rcba + RCBA_D31IP) >> (i * 4)) & 0x0F; + pin = (read32(rcba + RCBA_D31IP) >> (i * 4)) & 0x0F; if(pin > 0) { pin -= 1; - route = PIRQ_A + ((readw(rcba + RCBA_D31IR) >> (pin * 4)) & 0x07); + route = PIRQ_A + ((read16(rcba + RCBA_D31IR) >> (pin * 4)) & 0x07); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chipset, PCI_IRQ(31, pin), IO_APIC0, route); } } diff --git a/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c b/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c index 47645cee30..3884a27eb6 100644 --- a/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c +++ b/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c @@ -22,6 +22,7 @@ /* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. */ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c b/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c index 0e3e2de553..9aeeb63bc6 100644 --- a/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c +++ b/src/mainboard/lippert/spacerunner-lx/cache_as_ram_auto.c @@ -22,6 +22,7 @@ /* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. */ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c index 5d96118394..e4828151ff 100644 --- a/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c +++ b/src/mainboard/pcengines/alix1c/cache_as_ram_auto.c @@ -18,6 +18,7 @@ */ #define ASSEMBLY 1 +#define __PRE_RAM__ #include #include diff --git a/src/northbridge/amd/gx1/northbridge.c b/src/northbridge/amd/gx1/northbridge.c index b652ffac08..4eb02c7ded 100644 --- a/src/northbridge/amd/gx1/northbridge.c +++ b/src/northbridge/amd/gx1/northbridge.c @@ -36,8 +36,8 @@ static void optimize_xbus(device_t dev) static void enable_shadow(device_t dev) { - writel(0x77777777,GX_BASE+BC_XMAP_2); - writel(0x77777777,GX_BASE+BC_XMAP_3); + write32(GX_BASE+BC_XMAP_2, 0x77777777); + write32(GX_BASE+BC_XMAP_3, 0x77777777); } static void northbridge_init(device_t dev) diff --git a/src/northbridge/amd/gx1/raminit.c b/src/northbridge/amd/gx1/raminit.c index 365a18fa60..02ff7fb599 100644 --- a/src/northbridge/amd/gx1/raminit.c +++ b/src/northbridge/amd/gx1/raminit.c @@ -34,12 +34,12 @@ it with the version available from LANL. void setGX1Mem(unsigned int addr, unsigned int data) { - writel(data, (volatile void *)addr); + write32(addr, data); } unsigned int getGX1Mem(unsigned int addr) { - return (unsigned int)readl((const volatile void *)addr); + return (unsigned int)read32(addr); } void do_refresh(void) diff --git a/src/southbridge/amd/amd8111/amd8111_nic.c b/src/southbridge/amd/amd8111/amd8111_nic.c index d326d83dda..98ac62b5d7 100644 --- a/src/southbridge/amd/amd8111/amd8111_nic.c +++ b/src/southbridge/amd/amd8111/amd8111_nic.c @@ -54,12 +54,12 @@ static void nic_init(struct device *dev) /* Hard Reset PHY */ printk_debug("Reseting PHY... "); if (conf->phy_lowreset) { - writel(VAL0 | PHY_RST_POL | RESET_PHY , (void *)(mmio + CMD3)); + write32((void *)(mmio + CMD3), VAL0 | PHY_RST_POL | RESET_PHY); } else { - writel(VAL0 | RESET_PHY, (void *)(mmio + CMD3)); + write32((void *)(mmio + CMD3), VAL0 | RESET_PHY); } mdelay(15); - writel(RESET_PHY, (void *)(mmio + CMD3)); + write32((void *)(mmio + CMD3), RESET_PHY); printk_debug("Done\n"); } diff --git a/src/southbridge/amd/cs5530/cs5530_vga.c b/src/southbridge/amd/cs5530/cs5530_vga.c index 2dc8cf0b3b..b5182590d5 100644 --- a/src/southbridge/amd/cs5530/cs5530_vga.c +++ b/src/southbridge/amd/cs5530/cs5530_vga.c @@ -242,27 +242,27 @@ static void cs5530_set_clock_frequency(void *io_base, unsigned long pll_val) unsigned long reg; /* disable the PLL first, reset and power it down */ - reg = readl(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20; + reg = read32(io_base+CS5530_DOT_CLK_CONFIG) & ~0x20; reg |= 0x80000100; - writel(reg, io_base+CS5530_DOT_CLK_CONFIG); + write32(io_base+CS5530_DOT_CLK_CONFIG, reg); /* write the new PLL setting */ reg |= (pll_val & ~0x80000920); - writel(reg, io_base+CS5530_DOT_CLK_CONFIG); + write32(io_base+CS5530_DOT_CLK_CONFIG, reg); mdelay(1); /* wait for control voltage to be 0V */ /* enable the PLL */ reg |= 0x00000800; - writel(reg, io_base+CS5530_DOT_CLK_CONFIG); + write32(io_base+CS5530_DOT_CLK_CONFIG, reg); /* clear reset */ reg &= ~0x80000000; - writel(reg, io_base+CS5530_DOT_CLK_CONFIG); + write32(io_base+CS5530_DOT_CLK_CONFIG, reg); /* clear bypass */ reg &= ~0x00000100; - writel(reg, io_base+CS5530_DOT_CLK_CONFIG); + write32(io_base+CS5530_DOT_CLK_CONFIG, reg); } /** @@ -286,15 +286,15 @@ static void dc_setup_layout(void *gx_base, const struct video_mode *mode) { u32 base = 0x00000000; - writel(base, gx_base + DC_FB_ST_OFFSET); + write32(gx_base + DC_FB_ST_OFFSET, base); base += (COLOUR_DEPTH>>3) * mode->visible_pixel * mode->visible_lines; - writel(base, gx_base + DC_CB_ST_OFFSET); - writel(base, gx_base + DC_CURS_ST_OFFSET); - writel(base, gx_base + DC_VID_ST_OFFSET); - writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2, gx_base + DC_LINE_DELTA); - writel(((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3, gx_base + DC_BUF_SIZE); + write32(gx_base + DC_CB_ST_OFFSET, base); + write32(gx_base + DC_CURS_ST_OFFSET, base); + write32(gx_base + DC_VID_ST_OFFSET, base); + write32(gx_base + DC_LINE_DELTA, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 2); + write32(gx_base + DC_BUF_SIZE, ((COLOUR_DEPTH>>3) * mode->visible_pixel) >> 3); } /** @@ -343,20 +343,20 @@ static void dc_setup_timing(void *gx_base, const struct video_mode *mode) vtotal = vblankend; /* row description */ - writel((hactive - 1) | ((htotal - 1) << 16), gx_base + DC_H_TIMING_1); + write32(gx_base + DC_H_TIMING_1, (hactive - 1) | ((htotal - 1) << 16)); /* horizontal blank description */ - writel((hblankstart - 1) | ((hblankend - 1) << 16), gx_base + DC_H_TIMING_2); + write32(gx_base + DC_H_TIMING_2, (hblankstart - 1) | ((hblankend - 1) << 16)); /* horizontal sync description */ - writel((hsyncstart - 1) | ((hsyncend - 1) << 16), gx_base + DC_H_TIMING_3); - writel((hsyncstart - 1) | ((hsyncend - 1) << 16), gx_base + DC_FP_H_TIMING); + write32(gx_base + DC_H_TIMING_3, (hsyncstart - 1) | ((hsyncend - 1) << 16)); + write32(gx_base + DC_FP_H_TIMING, (hsyncstart - 1) | ((hsyncend - 1) << 16)); /* line description */ - writel((vactive - 1) | ((vtotal - 1) << 16), gx_base + DC_V_TIMING_1); + write32(gx_base + DC_V_TIMING_1, (vactive - 1) | ((vtotal - 1) << 16)); /* vertical blank description */ - writel((vblankstart - 1) | ((vblankend - 1) << 16), gx_base + DC_V_TIMING_2); + write32(gx_base + DC_V_TIMING_2, (vblankstart - 1) | ((vblankend - 1) << 16)); /* vertical sync description */ - writel((vsyncstart - 1) | ((vsyncend - 1) << 16), gx_base + DC_V_TIMING_3); - writel((vsyncstart - 2) | ((vsyncend - 2) << 16), gx_base + DC_FP_V_TIMING); + write32(gx_base + DC_V_TIMING_3, (vsyncstart - 1) | ((vsyncend - 1) << 16)); + write32(gx_base + DC_FP_V_TIMING, (vsyncstart - 2) | ((vsyncend - 2) << 16)); } /** @@ -369,14 +369,14 @@ static void dc_setup_timing(void *gx_base, const struct video_mode *mode) */ static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode) { - writel(0x00000080, gx_base + DC_GENERAL_CFG); + write32(gx_base + DC_GENERAL_CFG, 0x00000080); mdelay(1); dc_setup_layout(gx_base,mode); dc_setup_timing(gx_base,mode); - writel(0x2000C581, gx_base + DC_GENERAL_CFG); - writel(0x0000002F, gx_base + DC_TIMING_CFG); - writel(0x00003004, gx_base + DC_OUTPUT_CFG); + write32(gx_base + DC_GENERAL_CFG, 0x2000C581); + write32(gx_base + DC_TIMING_CFG, 0x0000002F); + write32(gx_base + DC_OUTPUT_CFG, 0x00003004); } /** @@ -392,7 +392,7 @@ static void cs5530_activate_video(void *io_base, const struct video_mode *mode) u32 val; val = (u32)mode->sync_pol << 8; - writel(val | 0x0020002F, io_base + CS5530_DISPLAY_CONFIG); + write32(io_base + CS5530_DISPLAY_CONFIG, val | 0x0020002F); } #if CONFIG_SPLASH_GRAPHIC == 1 @@ -465,7 +465,7 @@ static void cs5530_vga_init(device_t dev) cs5530_set_clock_frequency(io_base, mode->pll_value); - writel(DC_UNLOCK_MAGIC, gx_base + DC_UNLOCK); + write32(gx_base + DC_UNLOCK, DC_UNLOCK_MAGIC); show_boot_splash_16(mode->visible_pixel, mode->visible_lines, mode->visible_pixel * (COLOUR_DEPTH>>3), (void*)(GX_BASE + 0x800000)); @@ -473,7 +473,7 @@ static void cs5530_vga_init(device_t dev) cs5530_activate_mode(gx_base, mode); cs5530_activate_video(io_base, mode); - writel(0x00000000, gx_base + DC_UNLOCK); + write32(gx_base + DC_UNLOCK, 0x00000000); } static struct device_operations vga_ops = { diff --git a/src/southbridge/amd/cs5536/cs5536.c b/src/southbridge/amd/cs5536/cs5536.c index 002335d6b2..89e0cf5951 100644 --- a/src/southbridge/amd/cs5536/cs5536.c +++ b/src/southbridge/amd/cs5536/cs5536.c @@ -428,10 +428,10 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb) bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0); /* Make HCCPARAMS writeable */ - writel(readl(bar + IPREG04) | USB_HCCPW_SET, bar + IPREG04); + write32(bar + IPREG04, read32(bar + IPREG04) | USB_HCCPW_SET); /* ; EECP=50h, IST=01h, ASPC=1 */ - writel(0x00005012, bar + HCCPARAMS); + write32(bar + HCCPARAMS, 0x00005012); } dev = dev_find_device(PCI_VENDOR_ID_AMD, @@ -439,19 +439,19 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb) if (dev) { bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0); - writel(readl(bar + UOCMUX) & PUEN_SET, bar + UOCMUX); + write32(bar + UOCMUX, read32(bar + UOCMUX) & PUEN_SET); /* Host or Device? */ if (sb->enable_USBP4_device) { - writel(readl(bar + UOCMUX) | PMUX_DEVICE, bar + UOCMUX); + write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_DEVICE); } else { - writel(readl(bar + UOCMUX) | PMUX_HOST, bar + UOCMUX); + write32(bar + UOCMUX, read32(bar + UOCMUX) | PMUX_HOST); } /* Overcurrent configuration */ if (sb->enable_USBP4_overcurrent) { - writel(readl(bar + UOCCAP) - | sb->enable_USBP4_overcurrent, bar + UOCCAP); + write32(bar + UOCCAP, read32(bar + UOCCAP) + | sb->enable_USBP4_overcurrent); } } @@ -467,8 +467,8 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb) if (dev) { bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0); - writel(readl(bar + UDCDEVCTL) | UDC_SD_SET, - bar + UDCDEVCTL); + write32(bar + UDCDEVCTL, + read32(bar + UDCDEVCTL) | UDC_SD_SET); } @@ -477,8 +477,8 @@ static void enable_USB_port4(struct southbridge_amd_cs5536_config *sb) if (dev) { bar = (uint8_t *) pci_read_config32(dev, PCI_BASE_ADDRESS_0); - writel(readl(bar + UOCCTL) | PADEN_SET, bar + UOCCTL); - writel(readl(bar + UOCCAP) | APU_SET, bar + UOCCAP); + write32(bar + UOCCTL, read32(bar + UOCCTL) | PADEN_SET); + write32(bar + UOCCAP, read32(bar + UOCCAP) | APU_SET); } } diff --git a/src/southbridge/amd/sb600/sb600_hda.c b/src/southbridge/amd/sb600/sb600_hda.c index 4c17c04bbb..3d24825c63 100644 --- a/src/southbridge/amd/sb600/sb600_hda.c +++ b/src/southbridge/amd/sb600/sb600_hda.c @@ -37,10 +37,10 @@ static int set_bits(u8 * port, u32 mask, u32 val) /* Write (val & ~mask) to port */ val &= mask; - dword = readl(port); + dword = read32(port); dword &= ~mask; dword |= val; - writel(dword, port); + write32(port, dword); /* Wait for readback of register to * match what was just written to it @@ -49,7 +49,7 @@ static int set_bits(u8 * port, u32 mask, u32 val) do { /* Wait 1ms based on BKDG wait time */ mdelay(1); - dword = readl(port); + dword = read32(port); dword &= mask; } while ((dword != val) && --count); @@ -75,7 +75,7 @@ static u32 codec_detect(u8 * base) mdelay(1); /* Read in Codec location (BAR + 0xe)[3..0]*/ - dword = readl(base + 0xe); + dword = read32(base + 0xe); dword &= 0x0F; if (!dword) goto no_codec; @@ -180,7 +180,7 @@ static int wait_for_ready(u8 *base) int timeout = 50; while(timeout--) { - u32 dword=readl(base + HDA_ICII_REG); + u32 dword=read32(base + HDA_ICII_REG); if (!(dword & HDA_ICII_BUSY)) return 0; udelay(1); @@ -202,7 +202,7 @@ static int wait_for_valid(u8 *base) int timeout = 50; while(timeout--) { - u32 dword = readl(base + HDA_ICII_REG); + u32 dword = read32(base + HDA_ICII_REG); if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; @@ -224,12 +224,12 @@ static void codec_init(u8 * base, int addr) return; dword = (addr << 28) | 0x000f0000; - writel(dword, base + 0x60); + write32(base + 0x60, dword); if (wait_for_valid(base) == -1) return; - dword = readl(base + 0x64); + dword = read32(base + 0x64); /* 2 */ printk_debug("codec viddid: %08x\n", dword); @@ -246,7 +246,7 @@ static void codec_init(u8 * base, int addr) if (wait_for_ready(base) == -1) return; - writel(verb[i], base + 0x60); + write32(base + 0x60, verb[i]); if (wait_for_valid(base) == -1) return; diff --git a/src/southbridge/amd/sb600/sb600_sata.c b/src/southbridge/amd/sb600/sb600_sata.c index 3d7f2c416c..b0074b70e3 100644 --- a/src/southbridge/amd/sb600/sb600_sata.c +++ b/src/southbridge/amd/sb600/sb600_sata.c @@ -172,7 +172,7 @@ static void sata_init(struct device *dev) /* Use BAR5+0x2A8,BAR2 for Secondary Slave */ for (i = 0; i < 4; i++) { - byte = readb(sata_bar5 + 0x128 + 0x80 * i); + byte = read8(sata_bar5 + 0x128 + 0x80 * i); printk_spew("SATA port %i status = %x\n", i, byte); byte &= 0xF; @@ -182,24 +182,24 @@ static void sata_init(struct device *dev) printk_spew("SATA device detected but not talking. Trying lower speed.\n"); /* Read in Port-N Serial ATA Control Register */ - byte = readb(sata_bar5 + 0x12C + 0x80 * i); + byte = read8(sata_bar5 + 0x12C + 0x80 * i); /* Set Reset Bit and 1.5g bit */ byte |= 0x11; - writeb(byte, (sata_bar5 + 0x12C + 0x80 * i)); + write8((sata_bar5 + 0x12C + 0x80 * i), byte); /* Wait 1ms */ mdelay(1); /* Clear Reset Bit */ byte &= ~0x01; - writeb(byte, (sata_bar5 + 0x12C + 0x80 * i)); + write8((sata_bar5 + 0x12C + 0x80 * i), byte); /* Wait 1ms */ mdelay(1); /* Reread status */ - byte = readb(sata_bar5 + 0x128 + 0x80 * i); + byte = read8(sata_bar5 + 0x128 + 0x80 * i); printk_spew("SATA port %i status = %x\n", i, byte); byte &= 0xF; } @@ -223,15 +223,15 @@ static void sata_init(struct device *dev) /* Below is CIM InitSataLateFar */ /* Enable interrupts from the HBA */ - byte = readb(sata_bar5 + 0x4); + byte = read8(sata_bar5 + 0x4); byte |= 1 << 1; - writeb(byte, (sata_bar5 + 0x4)); + write8((sata_bar5 + 0x4), byte); /* Clear error status */ - writel(0xFFFFFFFF, (sata_bar5 + 0x130)); - writel(0xFFFFFFFF, (sata_bar5 + 0x1b0)); - writel(0xFFFFFFFF, (sata_bar5 + 0x230)); - writel(0xFFFFFFFF, (sata_bar5 + 0x2b0)); + write32((sata_bar5 + 0x130), 0xFFFFFFFF); + write32((sata_bar5 + 0x1b0), 0xFFFFFFFF); + write32((sata_bar5 + 0x230), 0xFFFFFFFF); + write32((sata_bar5 + 0x2b0), 0xFFFFFFFF); /* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */ /* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */ @@ -241,7 +241,7 @@ static void sata_init(struct device *dev) /* byte = pm_ioread(0x29); */ /* word |= byte<<8; */ /* printk_debug("AcpiGpe0Blk addr = %x\n", word); */ - /* writel(0x80000000 , word); */ + /* write32(word, 0x80000000); */ } static struct pci_operations lops_pci = { diff --git a/src/southbridge/amd/sb600/sb600_usb.c b/src/southbridge/amd/sb600/sb600_usb.c index 2002114f81..4be2d73272 100644 --- a/src/southbridge/amd/sb600/sb600_usb.c +++ b/src/southbridge/amd/sb600/sb600_usb.c @@ -98,16 +98,16 @@ static void usb_init2(struct device *dev) /* RPR5.4 Enables the USB PHY auto calibration resister to match 45ohm resistence */ dword = 0x00020F00; - writel(dword, usb2_bar0 + 0xC0); + write32(usb2_bar0 + 0xC0, dword); /* RPR5.5 Sets In/OUT FIFO threshold for best performance */ dword = 0x00200040; - writel(dword, usb2_bar0 + 0xA4); + write32(usb2_bar0 + 0xA4, dword); /* RPR5.9 Disable the EHCI Dynamic Power Saving feature */ - word = readl(usb2_bar0 + 0xBC); + word = read16(usb2_bar0 + 0xBC); word &= ~(1 << 12); - writew(word, usb2_bar0 + 0xBC); + write16(usb2_bar0 + 0xBC, word); /* RPR5.10 Disable EHCI MSI support */ byte = pci_read_config8(dev, 0x50); diff --git a/src/southbridge/broadcom/bcm5785/bcm5785_sata.c b/src/southbridge/broadcom/bcm5785/bcm5785_sata.c index 38cd6d4b3d..6818e6a2b0 100644 --- a/src/southbridge/broadcom/bcm5785/bcm5785_sata.c +++ b/src/southbridge/broadcom/bcm5785/bcm5785_sata.c @@ -52,13 +52,13 @@ static void sata_init(struct device *dev) printk_debug("init PHY...\n"); for(i=0; i<4; i++) { mmio = base + 0x100 * i; - byte = readb(mmio + 0x40); + byte = read8(mmio + 0x40); printk_debug("port %d PHY status = %02x\r\n", i, byte); if(byte & 0x4) {// bit 2 is set - byte = readb(mmio+0x48); - writeb(byte | 1, mmio + 0x48); - writeb(byte & (~1), mmio + 0x48); - byte = readb(mmio + 0x40); + byte = read8(mmio+0x48); + write8(mmio + 0x48, byte | 1); + write8(mmio + 0x48, byte & (~1)); + byte = read8(mmio + 0x40); printk_debug("after reset port %d PHY status = %02x\r\n", i, byte); } } diff --git a/src/southbridge/intel/i82801gx/i82801gx_azalia.c b/src/southbridge/intel/i82801gx/i82801gx_azalia.c index fd71813f5a..21973ce3d6 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_azalia.c +++ b/src/southbridge/intel/i82801gx/i82801gx_azalia.c @@ -40,10 +40,10 @@ static int set_bits(u8 * port, u32 mask, u32 val) /* Write (val & mask) to port */ val &= mask; - reg32 = readl(port); + reg32 = read32(port); reg32 &= ~mask; reg32 |= val; - writel(reg32, port); + write32(port, reg32); /* Wait for readback of register to * match what was just written to it @@ -52,7 +52,7 @@ static int set_bits(u8 * port, u32 mask, u32 val) do { /* Wait 1ms based on BKDG wait time */ mdelay(1); - reg32 = readl(port); + reg32 = read32(port); reg32 &= mask; } while ((reg32 != val) && --count); @@ -75,7 +75,7 @@ static int codec_detect(u8 * base) goto no_codec; /* Read in Codec location (BAR + 0xe)[2..0]*/ - reg32 = readl(base + 0xe); + reg32 = read32(base + 0xe); reg32 &= 0x0f; if (!reg32) goto no_codec; @@ -124,7 +124,7 @@ static int wait_for_ready(u8 *base) int timeout = 50; while(timeout--) { - u32 reg32 = readl(base + HDA_ICII_REG); + u32 reg32 = read32(base + HDA_ICII_REG); if (!(reg32 & HDA_ICII_BUSY)) return 0; udelay(1); @@ -144,16 +144,16 @@ static int wait_for_valid(u8 *base) u32 reg32; /* Send the verb to the codec */ - reg32 = readl(base + 0x68); + reg32 = read32(base + 0x68); reg32 |= (1 << 0) | (1 << 1); - writel(reg32, base + 0x68); + write32(base + 0x68, reg32); /* Use a 50 usec timeout - the Linux kernel uses the * same duration */ int timeout = 50; while(timeout--) { - reg32 = readl(base + HDA_ICII_REG); + reg32 = read32(base + HDA_ICII_REG); if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == HDA_ICII_VALID) return 0; @@ -177,12 +177,12 @@ static void codec_init(struct device *dev, u8 * base, int addr) return; reg32 = (addr << 28) | 0x000f0000; - writel(reg32, base + 0x60); + write32(base + 0x60, reg32); if (wait_for_valid(base) == -1) return; - reg32 = readl(base + 0x64); + reg32 = read32(base + 0x64); /* 2 */ printk_debug("Azalia: codec viddid: %08x\n", reg32); @@ -199,7 +199,7 @@ static void codec_init(struct device *dev, u8 * base, int addr) if (wait_for_ready(base) == -1) return; - writel(verb[i], base + 0x60); + write32(base + 0x60, verb[i]); if (wait_for_valid(base) == -1) return; diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c index 9460a34c2f..829ae6b819 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c @@ -31,10 +31,9 @@ void set_debug_port(unsigned port) u32 dbgctl; printk_debug("Enabling OWNER_CNT\n"); - dbgctl = readl(EHCI_BAR + EHCI_DEBUG_OFFSET); + dbgctl = read32(EHCI_BAR + EHCI_DEBUG_OFFSET); dbgctl |= (1 << 30); - writel(dbgctl, EHCI_BAR + EHCI_DEBUG_OFFSET); - + write32(EHCI_BAR + EHCI_DEBUG_OFFSET, dbgctl); } static void i82801gx_enable_usbdebug_direct(unsigned port) diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c index 90ef28ae3a..9edee4faa8 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c @@ -53,8 +53,8 @@ static void usb_ehci_init(struct device *dev) /* Clear any pending port changes */ res = find_resource(dev, 0x10); base = res->base; - reg32 = readl((u8 *)base + 0x24) | (1 << 2); - writel(reg32, (u8 *)base + 0x24); + reg32 = read32((u8 *)base + 0x24) | (1 << 2); + write32((u8 *)base + 0x24, reg32); /* workaround */ reg8 = pci_read_config8(dev, 0x84); diff --git a/src/southbridge/nvidia/ck804/ck804_nic.c b/src/southbridge/nvidia/ck804/ck804_nic.c index 4ad0d11a62..cb8015c16b 100644 --- a/src/southbridge/nvidia/ck804/ck804_nic.c +++ b/src/southbridge/nvidia/ck804/ck804_nic.c @@ -27,7 +27,7 @@ static void nic_init(struct device *dev) #define NvRegPhyInterface 0xC0 #define PHY_RGMII 0x10000000 - writel(PHY_RGMII, base + NvRegPhyInterface); + write32(base + NvRegPhyInterface, PHY_RGMII); old = dword = pci_read_config32(dev, 0x30); dword &= ~(0xf); @@ -76,15 +76,15 @@ static void nic_init(struct device *dev) if (!eeprom_valid) { unsigned long mac_pos; mac_pos = 0xffffffd0; /* See romstrap.inc and romstrap.lds. */ - mac_l = readl((uint8_t*)mac_pos) + nic_index; - mac_h = readl((uint8_t*)mac_pos + 4); + mac_l = read32((uint8_t*)mac_pos) + nic_index; + mac_h = read32((uint8_t*)mac_pos + 4); } #if 1 /* Set that into NIC MMIO. */ #define NvRegMacAddrA 0xA8 #define NvRegMacAddrB 0xAC - writel(mac_l, base + NvRegMacAddrA); - writel(mac_h, base + NvRegMacAddrB); + write32(base + NvRegMacAddrA, mac_l); + write32(base + NvRegMacAddrB, mac_h); #else /* Set that into NIC. */ pci_write_config32(dev, 0xa8, mac_l); diff --git a/src/southbridge/nvidia/mcp55/mcp55_aza.c b/src/southbridge/nvidia/mcp55/mcp55_aza.c index b43c8fd281..b86530b7af 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_aza.c +++ b/src/southbridge/nvidia/mcp55/mcp55_aza.c @@ -36,14 +36,14 @@ static int set_bits(uint8_t *port, uint32_t mask, uint32_t val) int count; val &= mask; - dword = readl(port); + dword = read32(port); dword &= ~mask; dword |= val; - writel(dword, port); + write32(port, dword); count = 50; do { - dword = readl(port); + dword = read32(port); dword &= mask; udelay(100); } while ((dword != val) && --count); @@ -63,9 +63,9 @@ static int codec_detect(uint8_t *base) set_bits(base + 0x08, 1, 1); /* 2 */ - dword = readl(base + 0x0e); + dword = read32(base + 0x0e); dword |= 7; - writel(dword, base + 0x0e); + write32(base + 0x0e, dword); /* 3 */ set_bits(base + 0x08, 1, 0); @@ -74,7 +74,7 @@ static int codec_detect(uint8_t *base) set_bits(base + 0x08, 1, 1); /* 5 */ - dword = readl(base + 0xe); + dword = read32(base + 0xe); dword &= 7; /* 6 */ @@ -173,17 +173,17 @@ static void codec_init(uint8_t *base, int addr) /* 1 */ do { - dword = readl(base + 0x68); + dword = read32(base + 0x68); } while (dword & 1); dword = (addr<<28) | 0x000f0000; - writel(dword, base + 0x60); + write32(base + 0x60, dword); do { - dword = readl(base + 0x68); + dword = read32(base + 0x68); } while ((dword & 3)!=2); - dword = readl(base + 0x64); + dword = read32(base + 0x64); /* 2 */ printk_debug("codec viddid: %08x\n", dword); @@ -198,13 +198,13 @@ static void codec_init(uint8_t *base, int addr) /* 3 */ for(i=0; ichip_info; @@ -157,16 +157,16 @@ static void nic_init(struct device *dev) if(!eeprom_valid) { unsigned long mac_pos; mac_pos = 0xffffffd0; // refer to romstrap.inc and romstrap.lds - mac_l = readl(mac_pos) + nic_index; // overflow? - mac_h = readl(mac_pos + 4); + mac_l = read32(mac_pos) + nic_index; // overflow? + mac_h = read32(mac_pos + 4); } #if 1 // set that into NIC MMIO #define NvRegMacAddrA 0xA8 #define NvRegMacAddrB 0xAC - writel(mac_l, base + NvRegMacAddrA); - writel(mac_h, base + NvRegMacAddrB); + write32(base + NvRegMacAddrA, mac_l); + write32(base + NvRegMacAddrB, mac_h); #else // set that into NIC pci_write_config32(dev, 0xa8, mac_l); diff --git a/src/southbridge/sis/sis966/sis966_aza.c b/src/southbridge/sis/sis966/sis966_aza.c index e8d67d063d..1dc91ae45d 100644 --- a/src/southbridge/sis/sis966/sis966_aza.c +++ b/src/southbridge/sis/sis966/sis966_aza.c @@ -48,14 +48,14 @@ static int set_bits(uint8_t *port, uint32_t mask, uint32_t val) int count; val &= mask; - dword = readl(port); + dword = read32(port); dword &= ~mask; dword |= val; - writel(dword, port); + write32(port, dword); count = 50; do { - dword = readl(port); + dword = read32(port); dword &= mask; udelay(100); } while ((dword != val) && --count); @@ -73,23 +73,23 @@ static int set_bits(uint8_t *port, uint32_t mask, uint32_t val) uint32_t dword; - dword = readl(base + 0x68); + dword = read32(base + 0x68); dword=dword|(unsigned long)0x0002; - writel(dword,base + 0x68); + write32(base + 0x68, dword); do { - dword = readl(base + 0x68); + dword = read32(base + 0x68); } while ((dword & 1)!=0); - writel(verb, base + 0x60); + write32(base + 0x60, verb); udelay(500); - dword = readl(base + 0x68); + dword = read32(base + 0x68); dword =(dword |0x1); - writel(dword, base + 0x68); + write32(base + 0x68, dword); do { udelay(100); - dword = readl(base + 0x68); + dword = read32(base + 0x68); } while ((dword & 3) != 2); - dword = readl(base + 0x64); + dword = read32(base + 0x64); return dword; } @@ -106,7 +106,7 @@ static int codec_detect(uint8_t *base) set_bits(base + 0x08, 1, 1); do{ - dword = readl(base + 0x08)&0x1; + dword = read32(base + 0x08)&0x1; if(idx++>1000) { printk_debug("controller reset fail !!! \n"); break;} } while (dword !=1); @@ -206,17 +206,17 @@ static void codec_init(uint8_t *base, int addr) /* 1 */ do { - dword = readl(base + 0x68); + dword = read32(base + 0x68); } while (dword & 1); dword = (addr<<28) | 0x000f0000; - writel(dword, base + 0x60); + write32(base + 0x60, dword); do { - dword = readl(base + 0x68); + dword = read32(base + 0x68); } while ((dword & 3)!=2); - dword = readl(base + 0x64); + dword = read32(base + 0x64); /* 2 */ printk_debug("codec viddid: %08x\n", dword); diff --git a/src/southbridge/sis/sis966/sis966_nic.c b/src/southbridge/sis/sis966/sis966_nic.c index 5d7e8c298c..9fadcf9419 100644 --- a/src/southbridge/sis/sis966/sis966_nic.c +++ b/src/southbridge/sis/sis966/sis966_nic.c @@ -144,13 +144,13 @@ static unsigned long ReadEEprom( struct device *dev, uint32_t base, uint32_t ulValue = (0x80 | (0x2 << 8) | (Reg << 10)); //BIT_7 - writel( ulValue,base+0x3c); + write32(base+0x3c, ulValue); mdelay(10); for(i=0 ; i <= LoopNum; i++) { - ulValue=readl(base+0x3c); + ulValue=read32(base+0x3c); if(!(ulValue & 0x0080)) //BIT_7 break; @@ -162,7 +162,7 @@ static unsigned long ReadEEprom( struct device *dev, uint32_t base, uint32_t if(i==LoopNum) data=0x10000; else{ - ulValue=readl(base+0x3c); + ulValue=read32(base+0x3c); data = ((ulValue & 0xffff0000) >> 16); } @@ -183,14 +183,14 @@ static int phy_read(uint32_t base, unsigned phy_addr, unsigned phy_reg) SMI_REQUEST); // SmiMgtInterface Reg is the SMI management interface register(offset 44h) of MAC - writel( Read_Cmd,base+0x44); + write32(base+0x44, Read_Cmd); // Polling SMI_REQ bit to be deasserted indicated read command completed do { // Wait 20 usec before checking status mdelay(20); - ulValue = readl(base+0x44); + ulValue = read32(base+0x44); } while((ulValue & SMI_REQUEST) != 0); //printk_debug("base %x cmd %lx ret val %lx\n", tmp,Read_Cmd,ulValue); usData=(ulValue>>16); @@ -282,7 +282,7 @@ static void nic_init(struct device *dev) return; } - ulValue=readl(base + 0x38L); // check EEPROM existing + ulValue=read32(base + 0x38L); // check EEPROM existing if((ulValue & 0x0002)) { @@ -303,9 +303,9 @@ static void nic_init(struct device *dev) }else{ // read MAC address from firmware printk_debug("EEPROM invalid!!\nReg 0x38h=%.8lx \n",ulValue); - MacAddr[0]=readw(0xffffffc0); // mac address store at here - MacAddr[1]=readw(0xffffffc2); - MacAddr[2]=readw(0xffffffc4); + MacAddr[0]=read16(0xffffffc0); // mac address store at here + MacAddr[1]=read16(0xffffffc2); + MacAddr[2]=read16(0xffffffc4); } set_apc(dev); diff --git a/src/southbridge/sis/sis966/sis966_usb2.c b/src/southbridge/sis/sis966/sis966_usb2.c index 4b3573b0ad..35dec13453 100644 --- a/src/southbridge/sis/sis966/sis966_usb2.c +++ b/src/southbridge/sis/sis966/sis966_usb2.c @@ -96,7 +96,7 @@ static void usb2_init(struct device *dev) base =(uint8_t *) res->base; printk_debug("base = %08x\n", base); - writel(0x2,base+0x20); + write32(base+0x20, 0x2); //----------------------------------------------------------- #if DEBUG_USB2