mb/google/dedede/var/kracko: Add LTE modem support

Add LTE modem to devicetree
Configure GPIO control for LTE modem

BUG=b:178092096
TEST=Built image and verified with command modem status

Change-Id: Id8f483e1132a08500fbe950711cc84197ce40b12
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This commit is contained in:
Tony Huang 2021-04-09 13:38:59 +08:00 committed by Patrick Georgi
parent 9f24c4b12a
commit a1165fdfd4
4 changed files with 68 additions and 0 deletions

View File

@ -0,0 +1,5 @@
## SPDX-License-Identifier: GPL-2.0-or-later
ramstage-y += gpio.c
smm-y += variant.c

View File

@ -0,0 +1,25 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
/* Pad configuration in ramstage*/
static const struct pad_config gpio_table[] = {
/* A10 : WWAN_EN */
PAD_CFG_GPO(GPP_A10, 1, PWROK),
/* B7 : PCIE_CLKREQ2_N ==> WWAN_SAR_DETECT_ODL*/
PAD_CFG_GPO(GPP_B7, 1, DEEP),
/* D0 : WWAN_HOST_WAKE ==> WWAN_WDISABLE_L */
PAD_CFG_GPO(GPP_D0, 1, DEEP),
/* H17 : WWAN_RST_L */
PAD_CFG_GPO(GPP_H17, 0, PLTRST),
};
const struct pad_config *variant_override_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(gpio_table);
return gpio_table;
}

View File

@ -54,6 +54,16 @@ chip soc/intel/jasperlake
device pci 14.0 on device pci 14.0 on
chip drivers/usb/acpi chip drivers/usb/acpi
device usb 0.0 on device usb 0.0 on
chip drivers/usb/acpi
register "desc" = ""LTE""
register "type" = "UPC_TYPE_INTERNAL"
register "has_power_resource" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H17)"
register "reset_off_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)"
register "enable_delay_ms" = "20"
device usb 2.3 on end
end
chip drivers/usb/acpi chip drivers/usb/acpi
register "desc" = ""UFCamera"" register "desc" = ""UFCamera""
register "type" = "UPC_TYPE_INTERNAL" register "type" = "UPC_TYPE_INTERNAL"
@ -64,6 +74,11 @@ chip soc/intel/jasperlake
register "type" = "UPC_TYPE_INTERNAL" register "type" = "UPC_TYPE_INTERNAL"
device usb 2.6 on end device usb 2.6 on end
end end
chip drivers/usb/acpi
register "desc" = ""LTE""
register "type" = "UPC_TYPE_INTERNAL"
device usb 3.3 on end
end
end end
end end
end # USB xHCI end # USB xHCI

View File

@ -0,0 +1,23 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <acpi/acpi.h>
#include <baseboard/variants.h>
#include <delay.h>
#include <gpio.h>
static void power_off_lte_module(void)
{
gpio_output(GPP_H17, 0);
mdelay(20);
gpio_output(GPP_A10, 0);
}
void variant_smi_sleep(u8 slp_typ)
{
/*
* Once the FW_CONFIG is provisioned, power off LTE module only under
* the situation where it is stuffed.
*/
if (slp_typ == ACPI_S5)
power_off_lte_module();
}