GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/dedede: add haboki variant 

haboki/habokay is the same design as drawlat/drawcia, and differs only
 in replacing Cr50 with discrete TPM.

BUG=b:187094464
TEST=FW_NAME=haboki emerge-keeby coreboot

Cq-Depend: chrome-internal:3850094
Change-Id: Id866927b7041c5bf1c73fb4f0c03798eb61efa79
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54755
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Wisley Chen 2021-05-21 14:11:10 +06:00 committed by Felix Held
parent 8fef0b7010
commit a17ffd2640
11 changed files with 385 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/mainboard/google/dedede/Kconfig
View File

@ -110,6 +110,7 @@ config MAINBOARD_PART_NUMBER
default "Blipper" if BOARD_GOOGLE_BLIPPER default "Blipper" if BOARD_GOOGLE_BLIPPER
default "Cret" if BOARD_GOOGLE_CRET default "Cret" if BOARD_GOOGLE_CRET
default "Pirika" if BOARD_GOOGLE_PIRIKA default "Pirika" if BOARD_GOOGLE_PIRIKA
default "Haboki" if BOARD_GOOGLE_HABOKI
config MAX_CPUS config MAX_CPUS
int int
@ -146,6 +147,7 @@ config VARIANT_DIR
default "blipper" if BOARD_GOOGLE_BLIPPER default "blipper" if BOARD_GOOGLE_BLIPPER
default "cret" if BOARD_GOOGLE_CRET default "cret" if BOARD_GOOGLE_CRET
default "pirika" if BOARD_GOOGLE_PIRIKA default "pirika" if BOARD_GOOGLE_PIRIKA
default "haboki" if BOARD_GOOGLE_HABOKI
endif #BOARD_GOOGLE_BASEBOARD_DEDEDE endif #BOARD_GOOGLE_BASEBOARD_DEDEDE

9
src/mainboard/google/dedede/Kconfig.name
View File

@ -34,6 +34,15 @@ config BOARD_GOOGLE_DRAWCIA_LEGACY
select DRIVERS_INTEL_MIPI_CAMERA select DRIVERS_INTEL_MIPI_CAMERA
select SOC_INTEL_COMMON_BLOCK_IPU select SOC_INTEL_COMMON_BLOCK_IPU
config BOARD_GOOGLE_HABOKI
bool "-> HABOKI"
select BOARD_GOOGLE_BASEBOARD_DEDEDE_TPM2
select BASEBOARD_DEDEDE_LAPTOP
select DRIVERS_GENERIC_MAX98357A
select GEO_SAR_ENABLE if CHROMEOS_WIFI_SAR
select DRIVERS_INTEL_MIPI_CAMERA
select SOC_INTEL_COMMON_BLOCK_IPU
config BOARD_GOOGLE_MADOO config BOARD_GOOGLE_MADOO
bool "-> Madoo" bool "-> Madoo"
select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50 select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50

4
src/mainboard/google/dedede/variants/haboki/Makefile.inc Normal file
View File

@ -0,0 +1,4 @@
## SPDX-License-Identifier: GPL-2.0-or-later
ramstage-y += gpio.c
ramstage-$(CONFIG_FW_CONFIG) += variant.c

19
src/mainboard/google/dedede/variants/haboki/gpio.c Normal file
View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <boardid.h>
#include <fw_config.h>
#include <ec/google/chromeec/ec.h>
/* Pad configuration in ramstage*/
static const struct pad_config gpio_table[] = {
/* C12 : AP_PEN_DET_ODL has an external pull-up and hence no pad termination.*/
PAD_CFG_GPI_GPIO_DRIVER(GPP_C12, NONE, DEEP),
};
const struct pad_config *variant_override_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(gpio_table);
return gpio_table;
}

11
src/mainboard/google/dedede/variants/haboki/include/variant/ec.h Normal file
View File

@ -0,0 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef MAINBOARD_EC_H
#define MAINBOARD_EC_H
#include <baseboard/ec.h>
/* Enable Keyboard Backlight in ACPI */
#define EC_ENABLE_KEYBOARD_BACKLIGHT
#endif

8
src/mainboard/google/dedede/variants/haboki/include/variant/gpio.h Normal file
View File

@ -0,0 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef MAINBOARD_GPIO_H
#define MAINBOARD_GPIO_H
#include <baseboard/gpio.h>
#endif /* MAINBOARD_GPIO_H */

5
src/mainboard/google/dedede/variants/haboki/memory/Makefile.inc Normal file
View File

@ -0,0 +1,5 @@
## SPDX-License-Identifier: GPL-2.0-or-later
## This is an auto-generated file. Do not edit!!
SPD_SOURCES =
SPD_SOURCES += lp4x-spd-1.hex # ID = 0(0b0000) Parts = MT53E512M32D2NP-046 WT:E, H9HCNNNBKMMLXR-NEE, K4U6E3S4AA-MGCR

4
src/mainboard/google/dedede/variants/haboki/memory/dram_id.generated.txt Normal file
View File

@ -0,0 +1,4 @@
DRAM Part Name ID to assign
MT53E512M32D2NP-046 WT:E 0 (0000)
H9HCNNNBKMMLXR-NEE 0 (0000)
K4U6E3S4AA-MGCR 0 (0000)

3
src/mainboard/google/dedede/variants/haboki/memory/mem_list_variant.txt Normal file
View File

@ -0,0 +1,3 @@
MT53E512M32D2NP-046 WT:E
H9HCNNNBKMMLXR-NEE
K4U6E3S4AA-MGCR

307
src/mainboard/google/dedede/variants/haboki/overridetree.cb Normal file
View File

@ -0,0 +1,307 @@
chip soc/intel/jasperlake
# USB Port Configuration
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| GSPI0 | cr50 TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| | before memory is up |
#| I2C0 | Trackpad |
#| I2C1 | Digitizer |
#| I2C2 | Touchscreen |
#| I2C3 | Camera |
#| I2C4 | Audio |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.gspi[0] = {
.speed_mhz = 1,
.early_init = 1,
},
.i2c[0] = {
.speed = I2C_SPEED_FAST,
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
},
.i2c[2] = {
.speed = I2C_SPEED_FAST,
},
.i2c[3] = {
.speed = I2C_SPEED_FAST,
},
.i2c[4] = {
.speed = I2C_SPEED_FAST,
},
}"
register "power_limits_config" = "{
.tdp_pl1_override = 6,
.tdp_pl2_override = 20,
}"
register "tcc_offset" = "20" # TCC of 85C
# Enable Acoustic noise mitigation and set slew rate to 1/4
# Rest of the parameters are 0 by default.
register "AcousticNoiseMitigation" = "1"
register "SlowSlewRate" = "SlewRateFastBy4"
register "FastPkgCRampDisable" = "1"
device domain 0 on
device pci 05.0 on # IPU - MIPI Camera
chip drivers/intel/mipi_camera
register "acpi_uid" = "0x50000"
register "acpi_name" = ""IPU0""
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
register "cio2_num_ports" = "2"
register "cio2_lanes_used" = "{1,4}"
register "cio2_lane_endpoint[1]" = ""^I2C3.CAM1""
register "cio2_prt[0]" = "0"
register "cio2_prt[1]" = "2"
device generic 0 on end
end
end
device pci 04.0 on
chip drivers/intel/dptf
# Default DPTF Policy for all drawcia boards if not overridden
register "options.tsr[0].desc" = ""Memory""
register "options.tsr[1].desc" = ""Ambient""
register "options.tsr[2].desc" = ""Charger""
register "options.tsr[3].desc" = ""5V regulator""
## Passive Policy
register "policies.passive" = "{
[0] = DPTF_PASSIVE(CPU, CPU, 80, 1000),
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 70, 4000),
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 51, 1000),
[3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000),
[4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 60, 1000)
}"
## Critical Policy
register "policies.critical" = "{
[0] = DPTF_CRITICAL(CPU, 119, SHUTDOWN),
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 115, SHUTDOWN),
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 115, SHUTDOWN),
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 115, SHUTDOWN),
[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 115, SHUTDOWN)
}"
register "controls.power_limits" = "{
.pl1 = {
.min_power = 3800,
.max_power = 5800,
.time_window_min = 1 * MSECS_PER_SEC,
.time_window_max = 1 * MSECS_PER_SEC,
.granularity = 200,
},
.pl2 = {
.min_power = 20000,
.max_power = 20000,
.time_window_min = 1 * MSECS_PER_SEC,
.time_window_max = 1 * MSECS_PER_SEC,
.granularity = 1000,
}
}"
## Charger Performance Control (Control, mA)
register "controls.charger_perf" = "{
[0] = { 255, 3000 },
[1] = { 24, 1500 },
[2] = { 16, 1000 },
[3] = { 8, 500 }
}"
device generic 0 on end
end
end # SA Thermal device
device pci 14.0 on
chip drivers/usb/acpi
device usb 0.0 on
chip drivers/usb/acpi
register "desc" = ""Camera""
register "type" = "UPC_TYPE_INTERNAL"
device usb 2.5 on end
end
end
end
end # USB xHCI
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
register "wake" = "GPE0_DW0_03"
register "probed" = "1"
device i2c 15 on end
end
end #I2C 0
device pci 15.2 on
chip drivers/generic/gpio_keys
register "name" = ""PENH""
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_C12)"
register "key.wakeup_route" = "WAKEUP_ROUTE_GPIO_IRQ"
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
register "key.dev_name" = ""EJCT""
register "key.linux_code" = "SW_PEN_INSERTED"
register "key.linux_input_type" = "EV_SW"
register "key.label" = ""pen_eject""
device generic 0 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GTCH7503""
register "generic.desc" = ""G2TOUCH Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
register "generic.reset_delay_ms" = "50"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
register "generic.enable_delay_ms" = "1"
register "generic.has_power_resource" = "1"
register "generic.disable_gpio_export_in_crs" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 40 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GDIX0000""
register "generic.desc" = ""Goodix Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
register "generic.reset_delay_ms" = "120"
register "generic.reset_off_delay_ms" = "2"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
register "generic.enable_delay_ms" = "12"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 0x5d on end
end
chip drivers/i2c/hid
register "generic.hid" = ""ELAN2513""
register "generic.desc" = ""ELAN Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D5)"
register "generic.reset_delay_ms" = "20"
register "generic.reset_off_delay_ms" = "2"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
register "generic.enable_delay_ms" = "10"
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
register "generic.stop_delay_ms" = "130"
register "generic.has_power_resource" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 15 on end
end
end # I2C 2
device pci 15.3 on
chip drivers/intel/mipi_camera
register "acpi_hid" = ""OVTI8856""
register "acpi_uid" = "0"
register "acpi_name" = ""CAM1""
register "chip_name" = ""Ov 8856 Camera""
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
register "ssdb.lanes_used" = "4"
register "ssdb.link_used" = "1"
register "ssdb.vcm_type" = "0x0C"
register "vcm_name" = ""VCM0""
register "num_freq_entries" = "2"
register "link_freq[0]" = "360000000"
register "link_freq[1]" = "180000000"
register "remote_name" = ""IPU0""
register "has_power_resource" = "1"
#Controls
register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8
register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2
register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset
#_ON
register "on_seq.ops_cnt" = "5"
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
#_OFF
register "off_seq.ops_cnt" = "4"
register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
device i2c 36 on end
end
chip drivers/intel/mipi_camera
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
register "acpi_uid" = "3"
register "acpi_name" = ""VCM0""
register "chip_name" = ""DW AF DAC""
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
register "pr0" = ""\\_SB.PCI0.I2C3.CAM1.PRIC""
register "vcm_compat" = ""dongwoon,dw9714""
device i2c 0C on end
end
chip drivers/intel/mipi_camera
register "acpi_uid" = "1"
register "acpi_name" = ""NVM0""
register "chip_name" = ""GT24C08""
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
register "nvm_size" = "0x0400"
register "nvm_pagesize" = "1"
register "nvm_readonly" = "1"
register "nvm_width" = "0x08"
register "nvm_compat" = ""atmel,24c08""
device i2c 50 on end
end
end # I2C 3
device pci 19.0 on
chip drivers/i2c/generic
register "hid" = ""10EC5682""
register "name" = ""RT58""
register "desc" = ""Headset Codec""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
# Set the jd_src to RT5668_JD1 for jack detection
register "property_count" = "1"
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on end
end
end #I2C 4
device pci 1f.3 on
chip drivers/generic/max98357a
register "hid" = ""MX98360A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D17)"
device generic 0 on end
end
end # Intel HDA
end
end

13
src/mainboard/google/dedede/variants/haboki/variant.c Normal file
View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <drivers/intel/gma/opregion.h>
#include <fw_config.h>
#include <sar.h>
const char *get_wifi_sar_cbfs_filename(void)
{
if (fw_config_probe(FW_CONFIG(TABLETMODE, TABLETMODE_ENABLED)))
return "wifi_sar-habokay.hex";
return WIFI_SAR_CBFS_DEFAULT_FILENAME;
}