diff --git a/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb b/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb
index f0dfecc97a..04da26c62e 100644
--- a/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb
+++ b/src/mainboard/google/skyrim/variants/winterhold/overridetree.cb
@@ -133,54 +133,23 @@ chip soc/amd/mendocino
 					device ref xhci_1_root_hub on # XHCI1 root hub
 						chip drivers/usb/acpi
 							device ref usb3_port3 on # USB 3.1 port3
-								chip drivers/usb/hub
-									register "desc" = ""USB Hub""
-									register "name" = ""VL822""
-									register "port_count" = "4"
-									device usb 0.0 on # VL822 USB3 hub
-										chip drivers/usb/acpi
-											register "desc" = ""USB3 Type-A Port A0 (DB)""
-											register "type" = "UPC_TYPE_USB3_A"
-											register "use_custom_pld" = "true"
-											register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
-											device usb 3.0 on end
-										end
-										chip drivers/usb/acpi
-											register "desc" = ""WWAN""
-											register "type" = "UPC_TYPE_INTERNAL"
-											register "group" = "ACPI_PLD_GROUP(2, 2)"
-											register "has_power_resource" = "1"
-											register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_42)"
-											register "reset_off_delay_ms" = "20"
-											register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_8)"
-											register "enable_delay_ms" = "20"
-											device usb 3.1 on end
-										end
-									end # VL822 USB3 hub
+								chip drivers/usb/acpi
+									register "desc" = ""USB3 Type-A Port A0 (MLB)""
+									register "type" = "UPC_TYPE_USB3_A"
+									register "use_custom_pld" = "true"
+									register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
+									device usb 3.2 on end
 								end
 							end # USB 3.1 port3
 						end
 						chip drivers/usb/acpi
 							device ref usb2_port3 on # USB 2 port3
-								chip drivers/usb/hub
-									register "desc" = ""USB Hub""
-									register "name" = ""VL822""
-									register "port_count" = "4"
-									device usb 0.0 on # VL822 USB2 hub
-										chip drivers/usb/acpi
-											register "desc" = ""USB2 Type-A Port A0 (DB)""
-											register "type" = "UPC_TYPE_USB3_A"
-											register "use_custom_pld" = "true"
-											register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(2, 2))"
-											device usb 2.0 on end
-										end
-										chip drivers/usb/acpi
-											register "desc" = ""WWAN""
-											register "type" = "UPC_TYPE_INTERNAL"
-											register "group" = "ACPI_PLD_GROUP(2, 2)"
-											device usb 2.1 on end
-										end
-									end # VL822 USB2 hub
+								chip drivers/usb/acpi
+									register "desc" = ""USB2 Type-A Port A0 (MLB)""
+									register "type" = "UPC_TYPE_USB3_A"
+									register "use_custom_pld" = "true"
+									register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
+									device usb 2.2 on end
 								end
 							end # USB 2 port3
 						end