Move SPI code out of board_enable.c where it started its life. The SPI
chip finding and SPI chip accessor code is moved as well. This can be split later if we feel like it. The non-use of svn cp is intentional because the only history we'd have to preserve are a few commits which were early prototypes of chip identification code. For those who intend to look at that history, they can look at board_enable.c revision 2853. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2857 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
a3e03872f3
commit
a28edc524b
|
@ -24,7 +24,7 @@ OBJS = chipset_enable.o board_enable.o udelay.o jedec.o sst28sf040.o \
|
|||
am29f040b.o mx29f002.o sst39sf020.o m29f400bt.o w49f002u.o \
|
||||
82802ab.o msys_doc.o pm49fl004.o sst49lf040.o sst49lfxxxc.o \
|
||||
sst_fwhub.o layout.o lbtable.o flashchips.o flashrom.o \
|
||||
sharplhf00l04.o w29ee011.o
|
||||
sharplhf00l04.o w29ee011.o spi.o
|
||||
|
||||
all: pciutils dep $(PROGRAM)
|
||||
|
||||
|
|
|
@ -30,176 +30,6 @@
|
|||
#include <string.h>
|
||||
#include "flash.h"
|
||||
|
||||
#define ITE_SUPERIO_PORT1 0x2e
|
||||
#define ITE_SUPERIO_PORT2 0x4e
|
||||
|
||||
#define JEDEC_RDID {0x9f}
|
||||
#define JEDEC_RDID_OUTSIZE 0x01
|
||||
#define JEDEC_RDID_INSIZE 0x03
|
||||
|
||||
static uint16_t it8716f_flashport = 0;
|
||||
|
||||
/* Generic Super I/O helper functions */
|
||||
uint8_t regval(uint16_t port, uint8_t reg)
|
||||
{
|
||||
outb(reg, port);
|
||||
return inb(port + 1);
|
||||
}
|
||||
|
||||
void regwrite(uint16_t port, uint8_t reg, uint8_t val)
|
||||
{
|
||||
outb(reg, port);
|
||||
outb(val, port + 1);
|
||||
}
|
||||
|
||||
/* Helper functions for most recent ITE IT87xx Super I/O chips */
|
||||
#define CHIP_ID_BYTE1_REG 0x20
|
||||
#define CHIP_ID_BYTE2_REG 0x21
|
||||
static void enter_conf_mode_ite(uint16_t port)
|
||||
{
|
||||
outb(0x87, port);
|
||||
outb(0x01, port);
|
||||
outb(0x55, port);
|
||||
if (port == ITE_SUPERIO_PORT1)
|
||||
outb(0x55, port);
|
||||
else
|
||||
outb(0xaa, port);
|
||||
}
|
||||
|
||||
static void exit_conf_mode_ite(uint16_t port)
|
||||
{
|
||||
regwrite(port, 0x02, 0x02);
|
||||
}
|
||||
|
||||
static uint16_t find_ite_serial_flash_port(uint16_t port)
|
||||
{
|
||||
uint8_t tmp = 0;
|
||||
uint16_t id, flashport = 0;
|
||||
|
||||
enter_conf_mode_ite(port);
|
||||
|
||||
id = regval(port, CHIP_ID_BYTE1_REG) << 8;
|
||||
id |= regval(port, CHIP_ID_BYTE2_REG);
|
||||
|
||||
/* TODO: Handle more IT87xx if they support flash translation */
|
||||
if (id == 0x8716) {
|
||||
/* NOLDN, reg 0x24, mask out lowest bit (suspend) */
|
||||
tmp = regval(port, 0x24) & 0xFE;
|
||||
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
||||
0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
|
||||
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
||||
0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
|
||||
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
||||
0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
|
||||
printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
|
||||
0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
|
||||
printf("LPC write to serial flash %sabled\n",
|
||||
(tmp & 1 << 4) ? "en" : "dis");
|
||||
printf("serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
|
||||
/* LDN 0x7, reg 0x64/0x65 */
|
||||
regwrite(port, 0x07, 0x7);
|
||||
flashport = regval(port, 0x64) << 8;
|
||||
flashport |= regval(port, 0x65);
|
||||
}
|
||||
exit_conf_mode_ite(port);
|
||||
return flashport;
|
||||
}
|
||||
|
||||
/* The IT8716F only supports commands with length 1,2,4,5 bytes including
|
||||
command byte and can not read more than 3 bytes from the device.
|
||||
This function expects writearr[0] to be the first byte sent to the device,
|
||||
whereas the IT8716F splits commands internally into address and non-address
|
||||
commands with the address in inverse wire order. That's why the register
|
||||
ordering in case 4 and 5 may seem strange. */
|
||||
static int it8716f_spi_command(uint16_t port, unsigned char writecnt, unsigned char readcnt, const unsigned char *writearr, unsigned char *readarr)
|
||||
{
|
||||
uint8_t busy, writeenc;
|
||||
do {
|
||||
busy = inb(port) & 0x80;
|
||||
} while (busy);
|
||||
if (readcnt > 3) {
|
||||
printf("%s called with unsupported readcnt %i\n",
|
||||
__FUNCTION__, readcnt);
|
||||
return 1;
|
||||
}
|
||||
switch (writecnt) {
|
||||
case 1:
|
||||
outb(writearr[0], port + 1);
|
||||
writeenc = 0x0;
|
||||
break;
|
||||
case 2:
|
||||
outb(writearr[0], port + 1);
|
||||
outb(writearr[1], port + 7);
|
||||
writeenc = 0x1;
|
||||
break;
|
||||
case 4:
|
||||
outb(writearr[0], port + 1);
|
||||
outb(writearr[1], port + 4);
|
||||
outb(writearr[2], port + 3);
|
||||
outb(writearr[3], port + 2);
|
||||
writeenc = 0x2;
|
||||
break;
|
||||
case 5:
|
||||
outb(writearr[0], port + 1);
|
||||
outb(writearr[1], port + 4);
|
||||
outb(writearr[2], port + 3);
|
||||
outb(writearr[3], port + 2);
|
||||
outb(writearr[4], port + 7);
|
||||
writeenc = 0x3;
|
||||
break;
|
||||
default:
|
||||
printf("%s called with unsupported writecnt %i\n",
|
||||
__FUNCTION__, writecnt);
|
||||
return 1;
|
||||
}
|
||||
/* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note:
|
||||
* We can't use writecnt directly, but have to use a strange encoding
|
||||
*/
|
||||
outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port);
|
||||
do {
|
||||
busy = inb(port) & 0x80;
|
||||
} while (busy);
|
||||
readarr[0] = inb(port + 5);
|
||||
readarr[1] = inb(port + 6);
|
||||
readarr[2] = inb(port + 7);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int it8716f_serial_rdid(uint16_t port, unsigned char *readarr)
|
||||
{
|
||||
const unsigned char cmd[] = JEDEC_RDID;
|
||||
|
||||
if (it8716f_spi_command(port, JEDEC_RDID_OUTSIZE, JEDEC_RDID_INSIZE, cmd, readarr))
|
||||
return 1;
|
||||
printf("RDID returned %02x %02x %02x\n", readarr[0], readarr[1], readarr[2]);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int it87xx_probe_serial_flash(const char *name)
|
||||
{
|
||||
it8716f_flashport = find_ite_serial_flash_port(ITE_SUPERIO_PORT1);
|
||||
if (!it8716f_flashport)
|
||||
it8716f_flashport = find_ite_serial_flash_port(ITE_SUPERIO_PORT2);
|
||||
return (!it8716f_flashport);
|
||||
}
|
||||
|
||||
int probe_spi(struct flashchip *flash)
|
||||
{
|
||||
unsigned char readarr[3];
|
||||
uint8_t manuf_id;
|
||||
uint16_t model_id;
|
||||
if (it8716f_flashport) {
|
||||
it8716f_serial_rdid(it8716f_flashport, readarr);
|
||||
manuf_id = readarr[0];
|
||||
model_id = (readarr[1] << 8) | readarr[2];
|
||||
printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id, model_id);
|
||||
if (manuf_id == flash->manufacture_id && model_id == flash->model_id)
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Helper functions for many Winbond Super I/Os of the W836xx range.
|
||||
*/
|
||||
|
|
|
@ -207,7 +207,9 @@ int handle_romentries(uint8_t *buffer, uint8_t *content);
|
|||
int linuxbios_init(void);
|
||||
extern char *lb_part, *lb_vendor;
|
||||
|
||||
/* spi.c */
|
||||
int probe_spi(struct flashchip *flash);
|
||||
int it87xx_probe_serial_flash(const char *name);
|
||||
|
||||
/* 82802ab.c */
|
||||
int probe_82802ab(struct flashchip *flash);
|
||||
|
|
Loading…
Reference in New Issue