put this in the right place.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/southbridge/amd/cs5536_lx/cs5536_usb.c

@@ -0,0 +1,95 @@
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+
+#include <cpu/amd/lxdef.h>
+#include <cpu/x86/msr.h>
+
+#include "cs5536.h"
+
+#define GLIU2_P2D_BM_1			0x51010021					// southbridge GLIU P2D base mask descriptor
+#define USBMSRUOCB				0x5120000b					// USB option controller base address register
+#define UOCMUX					(USBOC_BASE_ADDRESS + 4)	// option controller native multiplex register
+
+#define USBOC_BASE_ADDRESS		0xe1017000		// USB option contoller base address, used only here
+#define USBOC_PORT4_FUNCTION	2				// USB port 4 desired function (0 = disabled, 2 = host, 3 = device)
+
+static void ohci_init(struct device *dev)
+{
+	uint32_t n;
+	msr_t msr;
+
+	printk_debug("USB: Setting up OHCI controller... ");
+
+	// enable controller bus mastering
+	n = pci_read_config32(dev, PCI_COMMAND);
+	pci_write_config32(dev, PCI_COMMAND, 
+		n | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 
+		PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE);
+
+	// set the USB option controller base address
+	msr.hi = 0x0000000a;
+	msr.lo = USBOC_BASE_ADDRESS;
+	wrmsr(USBMSRUOCB, msr);
+
+	// create the GLIU memory mapping
+	msr.hi = 0x40000000 | ((USBOC_BASE_ADDRESS >> 24) & 0x000000ff);
+	msr.lo = ((USBOC_BASE_ADDRESS << 8) & 0xfff00000) | 0x000fffff;
+	wrmsr(GLIU2_P2D_BM_1, msr);
+
+	// set the multiplex register with port 4 function
+	*((uint32_t*)UOCMUX) = USBOC_PORT4_FUNCTION;
+
+	// finally, disable the USB option controller memory mapping
+	msr.hi = 0x000000ff;
+	msr.lo = 0xfff00000;
+	wrmsr(GLIU2_P2D_BM_1, msr);
+    
+	printk_debug("done.\n");
+}
+
+static void ehci_init(struct device *dev)
+{
+	uint32_t cmd;
+	printk_debug("USB: Setting up EHCI controller... ");
+	
+	// enable controller bus mastering
+	cmd = pci_read_config32(dev, PCI_COMMAND);
+	pci_write_config32(dev, PCI_COMMAND, 
+		cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 
+		PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE);
+
+	printk_debug("done.\n");
+}
+
+static struct device_operations ohci_ops  = {
+	.read_resources   = pci_dev_read_resources,
+	.set_resources    = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init             = ohci_init,
+	.scan_bus         = 0,
+	.enable           = southbridge_enable,
+};
+
+static struct device_operations ehci_ops  = {
+	.read_resources   = pci_dev_read_resources,
+	.set_resources    = pci_dev_set_resources,
+	.enable_resources = pci_dev_enable_resources,
+	.init             = ehci_init,
+	.scan_bus         = 0,
+	.enable           = southbridge_enable,
+};
+
+static struct pci_driver cs5536_usb1_driver __pci_driver = {
+	.ops    = &ohci_ops,
+	.vendor = PCI_VENDOR_ID_AMD,
+	.device = PCI_DEVICE_ID_AMD_CS5536_OHCI
+};
+
+static struct pci_driver cs5536_usb2_driver __pci_driver = {
+	.ops    = &ehci_ops,
+	.vendor = PCI_VENDOR_ID_AMD,
+	.device = PCI_DEVICE_ID_AMD_CS5536_EHCI
+};