soc/intel/apollolake: Update default LPDDR4 CA ODT config

Update default ODT config to have correct CA ODT settings as the
current defaults are incorrect for all the current apollolake designs.
All the current designs pull both A and B channels' LPDDR4 modules' ODT
pins to 1.1V. Therefore, the correct impedance setting needs to be
applied.

In order for the settings to take effect one needs to clear the
memory training cache in deployed systems. Trigger this by bumping
the memory setting version for the SoC.

If needed in the future support for allowing the override of this
setting from the mainboard should be straight forward. It's just not
necessary at this time.

BUG=b:37687843
TEST=BAT test, warm, reboot, S3 cycle test

Change-Id: I9a2f7636b46492a9d08472a0752cdf1f86a72e15
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19397
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
This commit is contained in:
Ravi Sarawadi 2017-04-25 19:30:58 -07:00 committed by Aaron Durbin
parent a3cecb2e71
commit a3d13fbd69
3 changed files with 27 additions and 5 deletions

View File

@ -30,6 +30,7 @@ config CPU_SPECIFIC_OPTIONS
select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM if RELOCATABLE_RAMSTAGE
select COLLECT_TIMESTAMPS
select COMMON_FADT
select FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS
select GENERIC_GPIO_LIB
select HAVE_INTEL_FIRMWARE
select HAVE_SMI_HANDLER

View File

@ -69,6 +69,20 @@ enum {
LP4_16Gb_DENSITY,
};
/*
* ODT settings :
* If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A, and HIGH for ODT_B,
 * choose ODT_AB_HIGH_HIGH. If ODT PIN to LP4 DRAM is pulled HIGH for ODT_A,
* and LOW for ODT_B, choose ODT_AB_HIGH_LOW.
*
* Note that the enum values correspond to the interpreted UPD fields
* witihn Ch[3:0]_OdtConfig parameters.
*/
enum {
ODT_A_B_HIGH_LOW = 0 << 1,
ODT_A_B_HIGH_HIGH = 1 << 1,
};
/* Provide bit swizzling per DQS and byte swapping within a channel. */
struct lpddr4_chan_swizzle_cfg {
uint8_t dqs[LP4_NUM_BYTE_LANES][DQ_BITS_PER_DQS];

View File

@ -73,11 +73,12 @@ static void set_lpddr4_defaults(FSP_M_CONFIG *cfg)
cfg->Ch2_Option = 0x3;
cfg->Ch3_Option = 0x3;
/* Weak on-die termination. */
cfg->Ch0_OdtConfig = 0;
cfg->Ch1_OdtConfig = 0;
cfg->Ch2_OdtConfig = 0;
cfg->Ch3_OdtConfig = 0;
/* Set CA ODT with default setting of ODT pins of LPDDR4 modules pulled
up to 1.1V. */
cfg->Ch0_OdtConfig = ODT_A_B_HIGH_HIGH;
cfg->Ch1_OdtConfig = ODT_A_B_HIGH_HIGH;
cfg->Ch2_OdtConfig = ODT_A_B_HIGH_HIGH;
cfg->Ch3_OdtConfig = ODT_A_B_HIGH_HIGH;
}
void meminit_lpddr4(FSP_M_CONFIG *cfg, int speed)
@ -319,3 +320,9 @@ void save_lpddr4_dimm_info(const struct lpddr4_cfg *lp4cfg, size_t mem_sku)
mem_info->dimm_cnt = index;
printk(BIOS_DEBUG, "%d DIMMs found\n", mem_info->dimm_cnt);
}
uint8_t fsp_memory_soc_version(void)
{
/* Bump this value when the memory configuration parameters change. */
return 1;
}