drivers/i2c/nct7802y: Add new hardware-monitoring IC
Just another hardware-monitoring chip. Only limited fan control and PECI configuration is implemented. Change-Id: I35ea79e12941804e398c6304a08170a776f4ca76 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This commit is contained in:
Nico Huber
Nico Huber
parent
9421727c70
commit
a3f643a3c0
|
|
@ -0,0 +1,4 @@
|
||||||
|
config DRIVERS_I2C_NCT7802Y
|
||||||
|
bool
|
||||||
|
help
|
||||||
|
The NCT7802Y by Nuvoton is a Hardware Monitoring IC.
|
||||||
|
|
@ -0,0 +1,3 @@
|
||||||
|
ramstage-$(CONFIG_DRIVERS_I2C_NCT7802Y) += nct7802y.c
|
||||||
|
ramstage-$(CONFIG_DRIVERS_I2C_NCT7802Y) += nct7802y_fan.c
|
||||||
|
ramstage-$(CONFIG_DRIVERS_I2C_NCT7802Y) += nct7802y_peci.c
|
||||||
|
|
@ -0,0 +1,96 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright 2017 secunet Security Networks AG
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DRIVERS_I2C_NCT7802Y_CHIP_H
|
||||||
|
#define DRIVERS_I2C_NCT7802Y_CHIP_H
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
#define NCT7802Y_PECI_CNT 2
|
||||||
|
#define NCT7802Y_FAN_CNT 3
|
||||||
|
|
||||||
|
enum nct7802y_peci_mode {
|
||||||
|
PECI_DISABLED = 0,
|
||||||
|
PECI_DOMAIN_0,
|
||||||
|
PECI_DOMAIN_1,
|
||||||
|
PECI_HIGHEST,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct nct7802y_peci_config {
|
||||||
|
enum nct7802y_peci_mode mode;
|
||||||
|
u8 base_temp;
|
||||||
|
};
|
||||||
|
|
||||||
|
enum nct7802y_fan_mode {
|
||||||
|
FAN_IGNORE = 0,
|
||||||
|
FAN_MANUAL,
|
||||||
|
FAN_SMART,
|
||||||
|
};
|
||||||
|
|
||||||
|
enum nct7802y_fan_smartmode {
|
||||||
|
SMART_FAN_DUTY = 0, /* Target values given in duty cycle %. */
|
||||||
|
SMART_FAN_RPM, /* Target valuse given in RPM. */
|
||||||
|
};
|
||||||
|
|
||||||
|
enum nct7802y_fan_speed {
|
||||||
|
FAN_SPEED_NORMAL = 0, /* RPM values <= 12,750. */
|
||||||
|
FAN_SPPED_HIGHSPEED, /* RPM values <= 25,500. */
|
||||||
|
};
|
||||||
|
|
||||||
|
enum nct7802y_fan_pecierror {
|
||||||
|
PECI_ERROR_KEEP = 0, /* Keep current value. */
|
||||||
|
PECI_ERROR_VALUE, /* Use `pecierror_minduty`. */
|
||||||
|
PECI_ERROR_FULLSPEED, /* Run PWM at 100% duty cycle. */
|
||||||
|
};
|
||||||
|
|
||||||
|
enum nct7802y_temp_source {
|
||||||
|
TEMP_SOURCE_REMOTE_1 = 0,
|
||||||
|
TEMP_SOURCE_REMOTE_2,
|
||||||
|
TEMP_SOURCE_REMOTE_3,
|
||||||
|
TEMP_SOURCE_LOCAL,
|
||||||
|
TEMP_SOURCE_PECI_0,
|
||||||
|
TEMP_SOURCE_PECI_1,
|
||||||
|
TEMP_SOURCE_PROGRAMMABLE_0,
|
||||||
|
TEMP_SOURCE_PROGRAMMABLE_1,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct nct7802y_fan_smartconfig {
|
||||||
|
enum nct7802y_fan_smartmode mode;
|
||||||
|
enum nct7802y_fan_speed speed;
|
||||||
|
enum nct7802y_temp_source tempsrc;
|
||||||
|
struct {
|
||||||
|
u8 temp;
|
||||||
|
u16 target;
|
||||||
|
} table[4];
|
||||||
|
u8 critical_temp;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct nct7802y_fan_config {
|
||||||
|
enum nct7802y_fan_mode mode;
|
||||||
|
union {
|
||||||
|
u8 duty_cycle;
|
||||||
|
struct nct7802y_fan_smartconfig smart;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Implements only those parts currently used by coreboot mainboards. */
|
||||||
|
struct drivers_i2c_nct7802y_config {
|
||||||
|
struct nct7802y_peci_config peci[NCT7802Y_PECI_CNT];
|
||||||
|
struct nct7802y_fan_config fan[NCT7802Y_FAN_CNT];
|
||||||
|
enum nct7802y_fan_pecierror on_pecierror;
|
||||||
|
u8 pecierror_minduty;
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* DRIVERS_I2C_NCT7802Y_CHIP_H */
|
||||||
|
|
@ -0,0 +1,49 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright 2017 secunet Security Networks AG
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
|
||||||
|
#include "nct7802y.h"
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
static void nct7802y_init(struct device *const dev)
|
||||||
|
{
|
||||||
|
if (!dev->chip_info) {
|
||||||
|
printk(BIOS_WARNING,
|
||||||
|
"NCT7802Y driver selected but not configured.");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
nct7802y_init_peci(dev);
|
||||||
|
nct7802y_init_fan(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct device_operations nct7802y_ops = {
|
||||||
|
.read_resources = DEVICE_NOOP,
|
||||||
|
.set_resources = DEVICE_NOOP,
|
||||||
|
.enable_resources = DEVICE_NOOP,
|
||||||
|
.init = nct7802y_init,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void nct7802y_enable(struct device *const dev)
|
||||||
|
{
|
||||||
|
dev->ops = &nct7802y_ops;
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations drivers_i2c_nct7802y_ops = {
|
||||||
|
CHIP_NAME("NCT7802Y")
|
||||||
|
.enable_dev = nct7802y_enable
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,104 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 secunet Security Networks AG
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DRIVERS_I2C_NCT7802Y_H
|
||||||
|
#define DRIVERS_I2C_NCT7802Y_H
|
||||||
|
|
||||||
|
#include <types.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/i2c_bus.h>
|
||||||
|
|
||||||
|
#define BANK_SELECT 0x00
|
||||||
|
|
||||||
|
/* Bank 0 */
|
||||||
|
|
||||||
|
#define PECI_ENABLE 0x23
|
||||||
|
#define PECI_ENABLE_AGENTx(x) (1 << (x))
|
||||||
|
|
||||||
|
#define FAN_ENABLE 0x24
|
||||||
|
#define FANx_ENABLE(fan) (1 << (fan))
|
||||||
|
|
||||||
|
#define FAN_CTRL(fan) (0x60 + (fan))
|
||||||
|
|
||||||
|
#define CLOSE_LOOP_FAN_RPM_CTRL 0x63
|
||||||
|
#define CLOSE_LOOP_FANx_EN(fan) (1 << ((fan) + 5))
|
||||||
|
#define CLOSE_LOOP_FANx_HIGH_RPM(fan) (1 << ((fan) + 2))
|
||||||
|
#define CLOSE_LOOP_FAN_PECI_ERR_MASK (3 << 0)
|
||||||
|
#define CLOSE_LOOP_FAN_PECI_ERR_CURR (0 << 0)
|
||||||
|
#define CLOSE_LOOP_FAN_PECI_ERR_VALUE (1 << 0)
|
||||||
|
#define CLOSE_LOOP_FAN_PECI_ERR_MAX (2 << 0)
|
||||||
|
|
||||||
|
#define TEMP_SHIFT(temp) (((temp) % 2) * 4)
|
||||||
|
#define TEMP_TO_FAN_MAP(temp) (0x64 + (temp) / 2)
|
||||||
|
#define TEMPx_TO_FAN_MAP_MASK(temp) (7 << TEMP_SHIFT(temp))
|
||||||
|
#define TEMPx_TO_FANy_MAP(temp, fan) (1 << (TEMP_SHIFT(temp) + (fan)))
|
||||||
|
|
||||||
|
#define FAN_CTRL_TEMP_SRC(temp) (0x68 + (temp) / 2)
|
||||||
|
#define FAN_CTRL_TEMPx_SRC_MASK(temp) (7 << TEMP_SHIFT(temp))
|
||||||
|
#define FAN_CTRL_TEMPx_SRCy(temp, src) ((src) << TEMP_SHIFT(temp))
|
||||||
|
|
||||||
|
#define FAN_DUTY_ON_PECI_ERROR 0x7a
|
||||||
|
|
||||||
|
#define TABLEx_TEMP_POINTy(fan, pt) (0x80 + (0x10 * (fan)) + (pt))
|
||||||
|
#define TABLEx_TARGET_POINTy(fan, pt) (0x85 + (0x10 * (fan)) + (pt))
|
||||||
|
|
||||||
|
/* Bank 1 */
|
||||||
|
|
||||||
|
#define PECI_CTRL_1 0x01
|
||||||
|
#define PECI_CTRL_1_EN (1 << 7)
|
||||||
|
#define PECI_CTRL_1_MANUAL_EN (1 << 1)
|
||||||
|
#define PECI_CTRL_1_ROUTINE_EN (1 << 0)
|
||||||
|
|
||||||
|
#define PECI_CTRL_3 0x03
|
||||||
|
#define PECI_CTRL_3_EN_AGENTx(x) (1 << ((x) + 4))
|
||||||
|
#define PECI_CTRL_3_HAS_DOM1_AGENTx(x) (1 << (x))
|
||||||
|
|
||||||
|
#define PECI_REPORT_TEMP_STYLE 0x04
|
||||||
|
#define PECI_TEMP_STYLE_DOM0_AGENTx(x) (0 << ((x) + 1))
|
||||||
|
#define PECI_TEMP_STYLE_DOM1_AGENTx(x) (1 << ((x) + 1))
|
||||||
|
#define PECI_TEMP_STYLE_SINGLE (0 << 0)
|
||||||
|
#define PECI_TEMP_STYLE_HIGHEST (1 << 0)
|
||||||
|
|
||||||
|
#define PECI_BASE_TEMP_AGENT(x) (0x09 + (x))
|
||||||
|
#define PECI_BASE_TEMP_MAX (0x7f << 0)
|
||||||
|
|
||||||
|
static inline int nct7802y_select_bank(struct device *const dev, const u8 bank)
|
||||||
|
{
|
||||||
|
const int ret = i2c_dev_writeb_at(dev, BANK_SELECT, bank);
|
||||||
|
if (ret != CB_SUCCESS)
|
||||||
|
printk(BIOS_NOTICE, "nct7802y: Select bank failed: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline int nct7802y_write(struct device *const dev,
|
||||||
|
const u8 reg, const u8 value)
|
||||||
|
{
|
||||||
|
return i2c_dev_writeb_at(dev, reg, value);
|
||||||
|
}
|
||||||
|
|
||||||
|
static inline int nct7802y_update(struct device *const dev, const u8 reg,
|
||||||
|
const u8 clear_mask, const u8 set_mask)
|
||||||
|
{
|
||||||
|
const int val = i2c_dev_readb_at(dev, reg);
|
||||||
|
if (val < 0)
|
||||||
|
return val;
|
||||||
|
return i2c_dev_writeb_at(dev, reg, (val & ~clear_mask) | set_mask);
|
||||||
|
}
|
||||||
|
|
||||||
|
void nct7802y_init_fan(struct device *dev);
|
||||||
|
void nct7802y_init_peci(struct device *dev);
|
||||||
|
|
||||||
|
#endif /* DRIVERS_I2C_NCT7802Y_H */
|
||||||
|
|
@ -0,0 +1,111 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright 2017 secunet Security Networks AG
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <types.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
|
||||||
|
#include "nct7802y.h"
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
static void init_fan(struct device *const dev,
|
||||||
|
const struct nct7802y_fan_config *const config,
|
||||||
|
const unsigned int fan)
|
||||||
|
{
|
||||||
|
unsigned int temp;
|
||||||
|
unsigned int i;
|
||||||
|
|
||||||
|
nct7802y_update(dev, FAN_ENABLE, 0, FANx_ENABLE(fan));
|
||||||
|
|
||||||
|
/* By default, do not map any temperature control to the fan. */
|
||||||
|
for (temp = 0; temp < NCT7802Y_FAN_CNT; ++temp) {
|
||||||
|
nct7802y_update(dev, TEMP_TO_FAN_MAP(temp),
|
||||||
|
TEMPx_TO_FANy_MAP(temp, fan), 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (config->mode == FAN_MANUAL) {
|
||||||
|
nct7802y_write(dev, FAN_CTRL(fan), config->duty_cycle);
|
||||||
|
} else {
|
||||||
|
u8 set = 0, div, mul;
|
||||||
|
if (config->smart.mode == SMART_FAN_RPM) {
|
||||||
|
set |= CLOSE_LOOP_FANx_EN(fan);
|
||||||
|
div = 50;
|
||||||
|
if (config->smart.speed == FAN_SPPED_HIGHSPEED) {
|
||||||
|
set |= CLOSE_LOOP_FANx_HIGH_RPM(fan);
|
||||||
|
div = 100;
|
||||||
|
}
|
||||||
|
mul = 1;
|
||||||
|
} else {
|
||||||
|
/* SMART_FAN_DUTY is given in %, 100% == 255. */
|
||||||
|
div = 100;
|
||||||
|
mul = 255;
|
||||||
|
}
|
||||||
|
nct7802y_update(dev, CLOSE_LOOP_FAN_RPM_CTRL,
|
||||||
|
CLOSE_LOOP_FANx_EN(fan) |
|
||||||
|
CLOSE_LOOP_FANx_HIGH_RPM(fan),
|
||||||
|
set);
|
||||||
|
|
||||||
|
/* Map TEMPx to FANx to make things simple */
|
||||||
|
nct7802y_update(dev, TEMP_TO_FAN_MAP(fan),
|
||||||
|
TEMPx_TO_FAN_MAP_MASK(fan),
|
||||||
|
TEMPx_TO_FANy_MAP(fan, fan));
|
||||||
|
|
||||||
|
nct7802y_update(dev, FAN_CTRL_TEMP_SRC(fan),
|
||||||
|
FAN_CTRL_TEMPx_SRC_MASK(fan),
|
||||||
|
FAN_CTRL_TEMPx_SRCy(
|
||||||
|
fan, config->smart.tempsrc));
|
||||||
|
|
||||||
|
for (i = 0; i < ARRAY_SIZE(config->smart.table); ++i) {
|
||||||
|
nct7802y_write(dev, TABLEx_TEMP_POINTy(fan, i),
|
||||||
|
config->smart.table[i].temp);
|
||||||
|
nct7802y_write(dev, TABLEx_TARGET_POINTy(fan, i),
|
||||||
|
(config->smart.table[i].target * mul) / div);
|
||||||
|
}
|
||||||
|
nct7802y_write(dev, TABLEx_TEMP_POINTy(fan, 4),
|
||||||
|
config->smart.critical_temp);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void nct7802y_init_fan(struct device *const dev)
|
||||||
|
{
|
||||||
|
const struct drivers_i2c_nct7802y_config *const config = dev->chip_info;
|
||||||
|
unsigned int i;
|
||||||
|
u8 set;
|
||||||
|
|
||||||
|
if (nct7802y_select_bank(dev, 0) != CB_SUCCESS)
|
||||||
|
return;
|
||||||
|
|
||||||
|
for (i = 0; i < NCT7802Y_FAN_CNT; ++i) {
|
||||||
|
if (config->fan[i].mode != FAN_IGNORE)
|
||||||
|
init_fan(dev, &config->fan[i], i);
|
||||||
|
}
|
||||||
|
|
||||||
|
switch (config->on_pecierror) {
|
||||||
|
case PECI_ERROR_KEEP:
|
||||||
|
set = CLOSE_LOOP_FAN_PECI_ERR_CURR;
|
||||||
|
break;
|
||||||
|
case PECI_ERROR_VALUE:
|
||||||
|
set = CLOSE_LOOP_FAN_PECI_ERR_VALUE;
|
||||||
|
break;
|
||||||
|
case PECI_ERROR_FULLSPEED:
|
||||||
|
set = CLOSE_LOOP_FAN_PECI_ERR_MAX;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
set = 0;
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
nct7802y_update(dev, CLOSE_LOOP_FAN_RPM_CTRL,
|
||||||
|
CLOSE_LOOP_FAN_PECI_ERR_MASK, set);
|
||||||
|
nct7802y_write(dev, FAN_DUTY_ON_PECI_ERROR, config->pecierror_minduty);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,87 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright 2017 secunet Security Networks AG
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <types.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
|
||||||
|
#include "nct7802y.h"
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
void nct7802y_init_peci(struct device *const dev)
|
||||||
|
{
|
||||||
|
const struct drivers_i2c_nct7802y_config *const config = dev->chip_info;
|
||||||
|
unsigned int i, all_off = 1;
|
||||||
|
|
||||||
|
/* Bank 1 can only be written to if PECI reading is enabled */
|
||||||
|
if (nct7802y_select_bank(dev, 0) != CB_SUCCESS)
|
||||||
|
return;
|
||||||
|
nct7802y_update(dev, PECI_ENABLE, 0, PECI_ENABLE_AGENTx(0));
|
||||||
|
|
||||||
|
if (nct7802y_select_bank(dev, 1) != CB_SUCCESS)
|
||||||
|
return;
|
||||||
|
|
||||||
|
for (i = 0; i < NCT7802Y_PECI_CNT; ++i) {
|
||||||
|
if (config->peci[i].mode != PECI_DISABLED) {
|
||||||
|
u8 ctrl3 = 0, style = 0;
|
||||||
|
switch (config->peci[i].mode) {
|
||||||
|
case PECI_DOMAIN_0:
|
||||||
|
ctrl3 = PECI_CTRL_3_EN_AGENTx(i);
|
||||||
|
style = PECI_TEMP_STYLE_DOM0_AGENTx(i) |
|
||||||
|
PECI_TEMP_STYLE_SINGLE;
|
||||||
|
break;
|
||||||
|
case PECI_DOMAIN_1:
|
||||||
|
ctrl3 = PECI_CTRL_3_EN_AGENTx(i) |
|
||||||
|
PECI_CTRL_3_HAS_DOM1_AGENTx(i);
|
||||||
|
style = PECI_TEMP_STYLE_DOM1_AGENTx(i) |
|
||||||
|
PECI_TEMP_STYLE_SINGLE;
|
||||||
|
break;
|
||||||
|
case PECI_HIGHEST:
|
||||||
|
ctrl3 = PECI_CTRL_3_EN_AGENTx(i) |
|
||||||
|
PECI_CTRL_3_HAS_DOM1_AGENTx(i);
|
||||||
|
style = PECI_TEMP_STYLE_HIGHEST;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
nct7802y_update(dev, PECI_CTRL_1,
|
||||||
|
PECI_CTRL_1_MANUAL_EN,
|
||||||
|
PECI_CTRL_1_EN |
|
||||||
|
PECI_CTRL_1_ROUTINE_EN);
|
||||||
|
nct7802y_update(dev, PECI_CTRL_3,
|
||||||
|
PECI_CTRL_3_HAS_DOM1_AGENTx(i), ctrl3);
|
||||||
|
nct7802y_update(dev, PECI_REPORT_TEMP_STYLE,
|
||||||
|
PECI_TEMP_STYLE_DOM1_AGENTx(i) |
|
||||||
|
PECI_TEMP_STYLE_HIGHEST,
|
||||||
|
style);
|
||||||
|
nct7802y_write(dev, PECI_BASE_TEMP_AGENT(i),
|
||||||
|
config->peci[i].base_temp);
|
||||||
|
all_off = 0;
|
||||||
|
} else {
|
||||||
|
nct7802y_update(dev, PECI_CTRL_3,
|
||||||
|
PECI_CTRL_3_EN_AGENTx(i), 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (all_off)
|
||||||
|
nct7802y_update(dev, PECI_CTRL_1, PECI_CTRL_1_EN, 0);
|
||||||
|
|
||||||
|
/* Disable PECI #0 reading if we only enabled it to access bank 1 */
|
||||||
|
if (config->peci[0].mode == PECI_DISABLED) {
|
||||||
|
if (nct7802y_select_bank(dev, 0) != CB_SUCCESS)
|
||||||
|
return;
|
||||||
|
|
||||||
|
nct7802y_update(dev, PECI_ENABLE, PECI_ENABLE_AGENTx(0), 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue