mb/google/dedede: add lalala variant
The Lalala variant is a design that differs only in replacing Cr50 with a discrete TPM part. BUG=b:184151664 Change-Id: I2f7abb9637cd5a13ac896396781b19feb156c948 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
This commit is contained in:
Aaron Durbin
parent
7164ad74bf
commit
a435c3e2ea
|
|
@ -98,6 +98,7 @@ config MAINBOARD_PART_NUMBER
|
|||
default "Waddledoo" if BOARD_GOOGLE_WADDLEDOO
|
||||
default "Waddledee" if BOARD_GOOGLE_WADDLEDEE
|
||||
default "Wheelie" if BOARD_GOOGLE_WHEELIE
|
||||
default "Lalala" if BOARD_GOOGLE_LALALA
|
||||
default "Magolor" if BOARD_GOOGLE_MAGOLOR
|
||||
default "Metaknight" if BOARD_GOOGLE_METAKNIGHT
|
||||
default "Lantis" if BOARD_GOOGLE_LANTIS
|
||||
|
|
@ -132,6 +133,7 @@ config VARIANT_DIR
|
|||
default "waddledoo" if BOARD_GOOGLE_WADDLEDOO
|
||||
default "waddledee" if BOARD_GOOGLE_WADDLEDEE
|
||||
default "wheelie" if BOARD_GOOGLE_WHEELIE
|
||||
default "lalala" if BOARD_GOOGLE_LALALA
|
||||
default "magolor" if BOARD_GOOGLE_MAGOLOR
|
||||
default "metaknight" if BOARD_GOOGLE_METAKNIGHT
|
||||
default "lantis" if BOARD_GOOGLE_LANTIS
|
||||
|
|
|
|||
|
|
@ -62,6 +62,14 @@ config BOARD_GOOGLE_WHEELIE
|
|||
select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
|
||||
select BASEBOARD_DEDEDE_LAPTOP
|
||||
|
||||
config BOARD_GOOGLE_LALALA
|
||||
bool "-> Lalala"
|
||||
select BOARD_GOOGLE_BASEBOARD_DEDEDE_TPM2
|
||||
select BASEBOARD_DEDEDE_LAPTOP
|
||||
select DRIVERS_INTEL_MIPI_CAMERA
|
||||
select GEO_SAR_ENABLE if CHROMEOS_WIFI_SAR
|
||||
select SOC_INTEL_COMMON_BLOCK_IPU
|
||||
|
||||
config BOARD_GOOGLE_MAGOLOR
|
||||
bool "-> Magolor"
|
||||
select BOARD_GOOGLE_BASEBOARD_DEDEDE_CR50
|
||||
|
|
|
|||
|
|
@ -0,0 +1,3 @@
|
|||
## SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
ramstage-$(CONFIG_FW_CONFIG) += variant.c
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#ifndef MAINBOARD_EC_H
|
||||
#define MAINBOARD_EC_H
|
||||
|
||||
#include <baseboard/ec.h>
|
||||
|
||||
/* Enable Keyboard Backlight in ACPI */
|
||||
#define EC_ENABLE_KEYBOARD_BACKLIGHT
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#ifndef MAINBOARD_GPIO_H
|
||||
#define MAINBOARD_GPIO_H
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
|
||||
#endif /* MAINBOARD_GPIO_H */
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
## SPDX-License-Identifier: GPL-2.0-or-later
|
||||
## This is an auto-generated file. Do not edit!!
|
||||
|
||||
SPD_SOURCES =
|
||||
SPD_SOURCES += lp4x-spd-1.hex # ID = 0(0b0000) Parts = MT53E512M32D2NP-046 WT:E, K4U6E3S4AA-MGCR, H9HCNNNBKMMLXR-NEE
|
||||
SPD_SOURCES += lp4x-spd-4.hex # ID = 1(0b0001) Parts = MT53E1G32D2NP-046 WT:A
|
||||
SPD_SOURCES += lp4x-spd-3.hex # ID = 2(0b0010) Parts = K4UBE3D4AA-MGCR
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
DRAM Part Name ID to assign
|
||||
MT53E512M32D2NP-046 WT:E 0 (0000)
|
||||
K4U6E3S4AA-MGCR 0 (0000)
|
||||
H9HCNNNBKMMLXR-NEE 0 (0000)
|
||||
MT53E1G32D2NP-046 WT:A 1 (0001)
|
||||
K4UBE3D4AA-MGCR 2 (0010)
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
MT53E512M32D2NP-046 WT:E
|
||||
K4U6E3S4AA-MGCR
|
||||
H9HCNNNBKMMLXR-NEE
|
||||
MT53E1G32D2NP-046 WT:A
|
||||
K4UBE3D4AA-MGCR
|
||||
|
|
@ -0,0 +1,307 @@
|
|||
chip soc/intel/jasperlake
|
||||
|
||||
# USB Port Configuration
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Camera
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | Trackpad |
|
||||
#| I2C1 | TBD |
|
||||
#| I2C2 | Touchscreen |
|
||||
#| I2C3 | Camera |
|
||||
#| I2C4 | Audio |
|
||||
#| I2C5 | TBD |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[2] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
.i2c[3] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
.i2c[4] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 40,
|
||||
}
|
||||
},
|
||||
}"
|
||||
|
||||
register "power_limits_config" = "{
|
||||
.tdp_pl1_override = 7,
|
||||
.tdp_pl2_override = 12,
|
||||
}"
|
||||
|
||||
register "tcc_offset" = "15" # TCC of 90C
|
||||
|
||||
# Enable Acoustic noise mitigation and set slew rate to 1/8
|
||||
# Rest of the parameters are 0 by default.
|
||||
register "AcousticNoiseMitigation" = "1"
|
||||
register "SlowSlewRate" = "SlewRateFastBy8"
|
||||
register "FastPkgCRampDisable" = "1"
|
||||
|
||||
device domain 0 on
|
||||
device pci 04.0 on
|
||||
chip drivers/intel/dptf
|
||||
register "options.tsr[0].desc" = ""Memory""
|
||||
register "options.tsr[1].desc" = ""Ambient""
|
||||
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 90, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 70, 6000),
|
||||
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 60, 5000)}"
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 80, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN)}"
|
||||
register "controls.power_limits.pl1" = "{
|
||||
.min_power = 3000,
|
||||
.max_power = 7000,
|
||||
.time_window_min = 1 * MSECS_PER_SEC,
|
||||
.time_window_max = 1 * MSECS_PER_SEC,
|
||||
.granularity = 200,}"
|
||||
register "controls.power_limits.pl2" = "{
|
||||
.min_power = 12000,
|
||||
.max_power = 12000,
|
||||
.time_window_min = 1 * MSECS_PER_SEC,
|
||||
.time_window_max = 1 * MSECS_PER_SEC,
|
||||
.granularity = 1000,}"
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf[0]" = "{ 255, 3000 }"
|
||||
register "controls.charger_perf[1]" = "{ 24, 1500 }"
|
||||
register "controls.charger_perf[2]" = "{ 16, 1000 }"
|
||||
register "controls.charger_perf[3]" = "{ 8, 500 }"
|
||||
|
||||
device generic 0 on end
|
||||
end
|
||||
end # SA Thermal device
|
||||
device pci 05.0 on # IPU - MIPI Camera
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_uid" = "0x50000"
|
||||
register "acpi_name" = ""IPU0""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
|
||||
|
||||
register "cio2_num_ports" = "1"
|
||||
register "cio2_lanes_used" = "{2}"
|
||||
register "cio2_lane_endpoint[0]" = ""^I2C3.CAM0""
|
||||
register "cio2_prt[0]" = "2"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device pci 14.0 on
|
||||
chip drivers/usb/acpi
|
||||
device usb 0.0 on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device usb 2.5 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end # USB xHCI
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""PNP0C50""
|
||||
register "generic.desc" = ""Synaptics Touchpad""
|
||||
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_B3_IRQ)"
|
||||
register "generic.wake" = "GPE0_DW0_03"
|
||||
register "generic.probed" = "1"
|
||||
register "hid_desc_reg_offset" = "0x20"
|
||||
device i2c 0x2c on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_B3_IRQ)"
|
||||
register "wake" = "GPE0_DW0_03"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C 0
|
||||
device pci 15.2 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN6915""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D4_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
|
||||
register "generic.reset_delay_ms" = "20"
|
||||
register "generic.reset_off_delay_ms" = "2"
|
||||
register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
|
||||
register "generic.stop_delay_ms" = "280"
|
||||
register "generic.stop_off_delay_ms" = "2"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
||||
register "generic.enable_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "generic.disable_gpio_export_in_crs" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 15 on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0001""
|
||||
register "desc" = ""ELAN Touchscreen""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
|
||||
register "probed" = "1"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
|
||||
register "reset_delay_ms" = "20"
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
||||
register "enable_delay_ms" = "1"
|
||||
register "has_power_resource" = "1"
|
||||
device i2c 10 on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RAYD0001""
|
||||
register "desc" = ""Raydium Touchscreen""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D4_IRQ)"
|
||||
register "probed" = "1"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D5)"
|
||||
register "reset_delay_ms" = "100"
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
|
||||
register "enable_delay_ms" = "50"
|
||||
register "has_power_resource" = "1"
|
||||
register "disable_gpio_export_in_crs" = "1"
|
||||
device i2c 39 on end
|
||||
end
|
||||
end # I2C 2
|
||||
device pci 15.3 on # I2C 3
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_hid" = ""OVTI5675""
|
||||
register "acpi_uid" = "0"
|
||||
register "acpi_name" = ""CAM0""
|
||||
register "chip_name" = ""Ov 5675 Camera""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
|
||||
|
||||
register "ssdb.lanes_used" = "2"
|
||||
register "ssdb.link_used" = "1"
|
||||
register "ssdb.vcm_type" = "0x0C"
|
||||
register "vcm_name" = ""VCM0""
|
||||
register "num_freq_entries" = "1"
|
||||
register "link_freq[0]" = "DEFAULT_LINK_FREQ"
|
||||
register "remote_name" = ""IPU0""
|
||||
|
||||
register "has_power_resource" = "1"
|
||||
#Controls
|
||||
register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_1
|
||||
register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
|
||||
|
||||
register "gpio_panel.gpio[0].gpio_num" = "GPP_D13" #power_enable_2p8
|
||||
register "gpio_panel.gpio[1].gpio_num" = "GPP_D14" #power_enable_1p2
|
||||
register "gpio_panel.gpio[2].gpio_num" = "GPP_D12" #reset
|
||||
|
||||
#_ON
|
||||
register "on_seq.ops_cnt" = "5"
|
||||
register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
|
||||
register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
|
||||
register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
|
||||
register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
|
||||
register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
|
||||
|
||||
#_OFF
|
||||
register "off_seq.ops_cnt" = "4"
|
||||
register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
|
||||
register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
|
||||
register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
|
||||
register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
|
||||
|
||||
device i2c 36 on end
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_uid" = "3"
|
||||
register "acpi_name" = ""VCM0""
|
||||
register "chip_name" = ""DW AF DAC""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_VCM"
|
||||
|
||||
register "pr0" = ""\\_SB.PCI0.I2C3.CAM0.PRIC""
|
||||
register "vcm_compat" = ""dongwoon,dw9714""
|
||||
|
||||
device i2c 0C on end
|
||||
|
||||
end
|
||||
chip drivers/intel/mipi_camera
|
||||
register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
|
||||
register "acpi_uid" = "1"
|
||||
register "acpi_name" = ""NVM0""
|
||||
register "chip_name" = ""GT24C08""
|
||||
register "device_type" = "INTEL_ACPI_CAMERA_NVM"
|
||||
|
||||
register "pr0" = ""\\_SB.PCI0.I2C3.CAM0.PRIC""
|
||||
|
||||
register "nvm_size" = "0x2000"
|
||||
register "nvm_pagesize" = "1"
|
||||
register "nvm_readonly" = "1"
|
||||
register "nvm_width" = "0x10"
|
||||
register "nvm_compat" = ""atmel,24c08""
|
||||
|
||||
device i2c 50 on end
|
||||
end
|
||||
end
|
||||
device pci 19.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Realtek RT5682""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)"
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC1015""
|
||||
register "desc" = ""Realtek SPK AMP L""
|
||||
register "uid" = "0"
|
||||
device i2c 28 on end
|
||||
end
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC1015""
|
||||
register "desc" = ""Realtek SPK AMP R""
|
||||
register "uid" = "1"
|
||||
device i2c 29 on end
|
||||
end
|
||||
end
|
||||
device pci 1e.2 off end # GSPI 0
|
||||
device pci 1f.3 on end # Intel HDA
|
||||
device pci 1f.5 on
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 0c31.0 on end # Discrete TPM
|
||||
end # chip drivers/pc80/tpm
|
||||
end # PCH SPI
|
||||
device pci 1c.7 on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_DW2_03"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # PCI Express Root Port 8 - WLAN
|
||||
end
|
||||
end
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <fw_config.h>
|
||||
#include <sar.h>
|
||||
|
||||
const char *get_wifi_sar_cbfs_filename(void)
|
||||
{
|
||||
if (fw_config_probe(FW_CONFIG(TABLETMODE, TABLETMODE_ENABLED)))
|
||||
return "wifi_sar-lalala.hex";
|
||||
|
||||
return WIFI_SAR_CBFS_DEFAULT_FILENAME;
|
||||
}
|
||||
Loading…
Reference in New Issue