diff --git a/src/mainboard/google/fizz/variants/baseboard/devicetree.cb b/src/mainboard/google/fizz/variants/baseboard/devicetree.cb index ff0db37964..45997a99dd 100644 --- a/src/mainboard/google/fizz/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/fizz/variants/baseboard/devicetree.cb @@ -323,9 +323,6 @@ chip soc/intel/skylake register "psys_pmax" = "120" register "tcc_offset" = "6" # TCC of 94C - # Use default SD card detect GPIO configuration - register "sdcard_cd_gpio_default" = "GPP_A7" - device cpu_cluster 0 on device lapic 0 on end end @@ -352,11 +349,6 @@ chip soc/intel/skylake register "type" = "UPC_TYPE_A" device usb 2.2 on end end - chip drivers/usb/acpi - register "desc" = ""USB2 Type-A Front Left"" - register "type" = "UPC_TYPE_A" - device usb 2.3 on end - end chip drivers/usb/acpi register "desc" = ""USB2 Type-A Rear Right"" register "type" = "UPC_TYPE_A" @@ -387,11 +379,6 @@ chip soc/intel/skylake register "type" = "UPC_TYPE_USB3_A" device usb 3.2 on end end - chip drivers/usb/acpi - register "desc" = ""USB3 Type-A Front Left"" - register "type" = "UPC_TYPE_USB3_A" - device usb 3.3 on end - end chip drivers/usb/acpi register "desc" = ""USB3 Type-A Rear Right"" register "type" = "UPC_TYPE_USB3_A" diff --git a/src/mainboard/google/fizz/variants/fizz/overridetree.cb b/src/mainboard/google/fizz/variants/fizz/overridetree.cb index 0d3c4fc54e..05d8a97560 100644 --- a/src/mainboard/google/fizz/variants/fizz/overridetree.cb +++ b/src/mainboard/google/fizz/variants/fizz/overridetree.cb @@ -1,6 +1,25 @@ chip soc/intel/skylake + # Use default SD card detect GPIO configuration + register "sdcard_cd_gpio_default" = "GPP_A7" + device domain 0 on + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Front Left"" + register "type" = "UPC_TYPE_A" + device usb 2.3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Front Left"" + register "type" = "UPC_TYPE_USB3_A" + device usb 3.3 on end + end + end + end + end # USB xHCI device pci 19.1 on chip drivers/i2c/generic register "hid" = ""10EC5663"" @@ -10,7 +29,5 @@ chip soc/intel/skylake device i2c 13 on end end end # I2C #5 - end - end diff --git a/src/mainboard/google/fizz/variants/karma/gpio.c b/src/mainboard/google/fizz/variants/karma/gpio.c index c54f75cf4d..0c775b696c 100644 --- a/src/mainboard/google/fizz/variants/karma/gpio.c +++ b/src/mainboard/google/fizz/variants/karma/gpio.c @@ -27,8 +27,7 @@ static const struct pad_config gpio_table[] = { /* ESPI_IO3 */ /* ESPI_CS# */ /* SERIRQ */ PAD_CFG_NC(GPP_A6), /* TP331 */ -/* PIRQA# */ PAD_CFG_GPI_INT(GPP_A7, 20K_PU, DEEP, - EDGE), /* SD_CDZ */ +/* PIRQA# */ PAD_CFG_NC(GPP_A7), /* TP104 */ /* CLKRUN# */ PAD_CFG_NC(GPP_A8), /* TP329 */ /* ESPI_CLK */ /* CLKOUT_LPC1 */ PAD_CFG_NC(GPP_A10), /* TP188 */ @@ -38,8 +37,8 @@ static const struct pad_config gpio_table[] = { DEEP), /* eSPI mode */ /* ESPI_RESET# */ /* SUSACK# */ PAD_CFG_NC(GPP_A15), /* TP150 */ -/* SD_1P8_SEL */ PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1), -/* SD_PWR_EN# */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1), +/* SD_1P8_SEL */ PAD_CFG_NC(GPP_A16), +/* SD_PWR_EN# */ PAD_CFG_NC(GPP_A17), /* ISH_GP0 */ PAD_CFG_GPO(GPP_A18, 0, DEEP), /* 7322_OE */ /* ISH_GP1 */ PAD_CFG_GPI_GPIO_DRIVER(GPP_A19, NONE, DEEP), /* HDPO */ /* ISH_GP2 */ PAD_CFG_NC(GPP_A20), @@ -217,13 +216,13 @@ static const struct pad_config gpio_table[] = { /* EMMC_CLK */ PAD_CFG_NC(GPP_F22), /* RSVD */ PAD_CFG_NC(GPP_F23), -/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1), -/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1), -/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1), -/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1), -/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1), -/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1), /* SD_CDZ */ -/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1), +/* SD_CMD */ PAD_CFG_NC(GPP_G0), +/* SD_DATA0 */ PAD_CFG_NC(GPP_G1), +/* SD_DATA1 */ PAD_CFG_NC(GPP_G2), +/* SD_DATA2 */ PAD_CFG_NC(GPP_G3), +/* SD_DATA3 */ PAD_CFG_NC(GPP_G4), +/* SD_CD# */ PAD_CFG_NC(GPP_G5), +/* SD_CLK */ PAD_CFG_NC(GPP_G6), /* SD_WP */ PAD_CFG_NC(GPP_G7), /* TP292 */ /* BATLOW# */ PAD_CFG_NC(GPD0), /* TP148 */ diff --git a/src/mainboard/google/fizz/variants/karma/overridetree.cb b/src/mainboard/google/fizz/variants/karma/overridetree.cb index f04def2a05..ee88352d13 100644 --- a/src/mainboard/google/fizz/variants/karma/overridetree.cb +++ b/src/mainboard/google/fizz/variants/karma/overridetree.cb @@ -4,20 +4,35 @@ chip soc/intel/skylake #+----------------+-------+-----------------------------------+ #| Device | Port# | Rev | #+----------------+-------+-----------------------------------+ + #| SD Card | 4 | | #| Touchsreen | 10 | | #+----------------+-------+-----------------------------------+ + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Card reader register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Touchscreen + + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Card reader + register "psys_pmax" = "151" device domain 0 on device pci 14.0 on chip drivers/usb/acpi device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""USB2 SD Card"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.3 on end + end chip drivers/usb/acpi register "desc" = ""USB2 Touchscreen"" register "type" = "UPC_TYPE_INTERNAL" device usb 2.9 on end end + chip drivers/usb/acpi + register "desc" = ""USB3 SD Card"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.3 on end + end end end end # USB xHCI @@ -45,5 +60,6 @@ chip soc/intel/skylake device i2c 1a on end end end # I2C #5 + device pci 1e.6 off end # SDCard end end