diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 90164c7ccb..51b764d677 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -14,9 +14,9 @@ end ## Compute the start location and size size of ## The coreboot bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_PAYLOAD = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of coreboot will start in the boot rom @@ -33,7 +33,7 @@ default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) default XIP_ROM_SIZE=65536 default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) -arch i386 end +arch i386 end ## @@ -53,46 +53,42 @@ if HAVE_PIRQ_TABLE object irq_tables.o end if USE_DCACHE_RAM - if CONFIG_USE_INIT - - makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" - end - - else - - makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" - end - +if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" end else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end +end +else ## ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end end @@ -101,13 +97,12 @@ end ## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds end mainboardinit cpu/x86/32bit/entry32.inc - if USE_DCACHE_RAM if CONFIG_USE_INIT ldscript /cpu/x86/32bit/entry32.lds @@ -121,12 +116,12 @@ end ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end if USE_DCACHE_RAM @@ -157,7 +152,7 @@ if USE_DCACHE_RAM end ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### @@ -195,171 +190,169 @@ else end - ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end - # sample config for tyan/s2891 chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end - + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/ck804 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b off # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b off # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end end - device pci 1.1 on # SM 0 -# chip drivers/generic/generic #dimm 0-0-0 -# device i2c 50 on end -# end -# chip drivers/generic/generic #dimm 0-0-1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #dimm 0-1-0 -# device i2c 52 on end -# end -# chip drivers/generic/generic #dimm 0-1-1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #dimm 1-0-0 -# device i2c 54 on end -# end -# chip drivers/generic/generic #dimm 1-0-1 -# device i2c 55 on end -# end -# chip drivers/generic/generic #dimm 1-1-0 -# device i2c 56 on end -# end -# chip drivers/generic/generic #dimm 1-1-1 -# device i2c 57 on end -# end - end # SM -# device pci 1.1 on # SM 1 + device pci 1.1 on # SM 0 +# chip drivers/generic/generic #dimm 0-0-0 +# device i2c 50 on end +# end +# chip drivers/generic/generic #dimm 0-0-1 +# device i2c 51 on end +# end +# chip drivers/generic/generic #dimm 0-1-0 +# device i2c 52 on end +# end +# chip drivers/generic/generic #dimm 0-1-1 +# device i2c 53 on end +# end +# chip drivers/generic/generic #dimm 1-0-0 +# device i2c 54 on end +# end +# chip drivers/generic/generic #dimm 1-0-1 +# device i2c 55 on end +# end +# chip drivers/generic/generic #dimm 1-1-0 +# device i2c 56 on end +# end +# chip drivers/generic/generic #dimm 1-1-1 +# device i2c 57 on end +# end + end # SM +# device pci 1.1 on # SM 1 # chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 -# device i2c 2d on end -# end -# chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 -# device i2c 2e on end -# end -# chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN -# device i2c 2a on end -# end -# chip drivers/generic/generic # Winbond HWM 0x92 -# device i2c 49 on end -# end -# chip drivers/generic/generic # Winbond HWM 0x94 -# device i2c 4a on end -# end +# device i2c 2d on end +# end +# chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 +# device i2c 2e on end +# end +# chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN +# device i2c 2a on end +# end +# chip drivers/generic/generic # Winbond HWM 0x92 +# device i2c 49 on end +# end +# chip drivers/generic/generic # Winbond HWM 0x94 +# device i2c 4a on end +# end # end #SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on # PCI + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI # chip drivers/ati/ragexl - chip drivers/pci/onboard - device pci 7.0 on end - #register "rom_address" = "0xfff80000" #for 512K - register "rom_address" = "0xfff00000" #for 1M - end + chip drivers/pci/onboard + device pci 7.0 on end + #register "rom_address" = "0xfff80000" #for 512K + register "rom_address" = "0xfff00000" #for 1M + end end - device pci a.0 off end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end # Link 1 device pci 18.0 on - # devices on link 2, link 2 == LDT 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - chip drivers/pci/onboard - device pci 9.0 on end + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 9.0 on end device pci 9.1 on end - end + end end - device pci 1.1 on end - end + device pci 1.1 on end + end end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end #mc0 - + end # pci_domain -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 off end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 off end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 off end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 off end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc # device pnp 0.8 on end # hard_reset -# end +# end end # root_complex diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 8513e049fb..bd3b695671 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -30,9 +30,9 @@ uses USE_OPTION_TABLE uses LB_CKS_RANGE_START uses LB_CKS_RANGE_END uses LB_CKS_LOC +uses MAINBOARD uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR -uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION @@ -75,7 +75,6 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK - ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes default ROM_SIZE=524288 @@ -83,7 +82,6 @@ default ROM_SIZE=524288 #1M bytes #default ROM_SIZE=1048576 - ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c index c8747a88cb..e264f366b1 100644 --- a/src/mainboard/tyan/s2891/auto.c +++ b/src/mainboard/tyan/s2891/auto.c @@ -1,5 +1,5 @@ #define ASSEMBLY 1 - + #include #include #include @@ -33,20 +33,20 @@ static void hard_reset(void) { - set_bios_reset(); + set_bios_reset(); - /* full reset */ + /* full reset */ outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); + outb(0x0e, 0x0cf9); } static void soft_reset(void) { - set_bios_reset(); + set_bios_reset(); #if 1 - /* link reset */ + /* link reset */ outb(0x02, 0x0cf9); - outb(0x06, 0x0cf9); + outb(0x06, 0x0cf9); #endif } @@ -69,15 +69,14 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #define QRANK_DIMM_SUPPORT 1 - #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" - /* tyan does not want the default */ -#include "resourcemap.c" +/* tyan does not want the default */ +#include "resourcemap.c" -#define FIRST_CPU 1 +#define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -112,38 +111,36 @@ static void main(unsigned long bist) #endif }; - int needs_reset; + int needs_reset; #if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; + struct node_core_id id; #else - unsigned nodeid; + unsigned nodeid; #endif - if (bist == 0) { - k8_init_and_stop_secondaries(); - } + if (bist == 0) { + k8_init_and_stop_secondaries(); + } + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); - // post_code(0x32); - - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - /* Halt if there was a built in self test failure */ report_bist_failure(bist); - setup_s2891_resource_map(); + setup_s2891_resource_map(); needs_reset = setup_coherent_ht_domain(); - + needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); + needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } enable_smbus(); diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c index aceffc33fa..78a2bb1ac8 100644 --- a/src/mainboard/tyan/s2891/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c @@ -8,7 +8,6 @@ #define SET_NB_CFG_54 1 #endif - #include #include #include @@ -21,17 +20,6 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } -#endif -} -#endif - #include #include "northbridge/amd/amdk8/incoherent_ht.c" @@ -54,7 +42,6 @@ static void post_code(uint8_t value) { #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) - static void memreset_setup(void) { } @@ -78,7 +65,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/dualcore/dualcore.c" @@ -92,7 +79,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" - #if USE_FALLBACK_IMAGE == 1 #include "southbridge/nvidia/ck804/ck804_enable_rom.c" @@ -101,28 +87,28 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; + unsigned value; + uint32_t dword; + uint8_t byte; - /* subject decoding*/ - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + /* subject decoding*/ + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - /* Serial 0, Serial 1 */ - dword |= (1<<0) | (1<<1); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + /* LPC Positive Decode 0 */ + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + /* Serial 0, Serial 1 */ + dword |= (1<<0) | (1<<1); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); -#if 1 - /* s2891 has onboard LPC port 80 */ - /*Hope I can enable port 80 here - It will decode port 80 to LPC, If you are using PCI post code you can not do this */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); +#if 1 + /* s2891 has onboard LPC port 80 */ + /*Hope I can enable port 80 here + It will decode port 80 to LPC, If you are using PCI post code you can not do this */ + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); #endif @@ -130,48 +116,48 @@ static void sio_setup(void) void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { - unsigned last_boot_normal_x = last_boot_normal(); + unsigned last_boot_normal_x = last_boot_normal(); - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ - enumerate_ht_chain(); + enumerate_ht_chain(); - sio_setup(); + sio_setup(); - /* Setup the ck804 */ - ck804_enable_rom(); + /* Setup the ck804 */ + ck804_enable_rom(); - /* Is this a deliberate reset by the bios */ -// post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } normal_image: -// post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) , "b" (cpu_init_detectedx)/* inputs */ - ); +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ + ); fallback_image: -// post_code(0x25); +// post_code(0x25); ; } #endif @@ -182,71 +168,71 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #endif - real_main(bist, cpu_init_detectedx); + real_main(bist, cpu_init_detectedx); } void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { - (0xa<<3)|0, (0xa<<3)|2, 0, 0, - (0xa<<3)|1, (0xa<<3)|3, 0, 0, + (0xa<<3)|0, (0xa<<3)|2, 0, 0, + (0xa<<3)|1, (0xa<<3)|3, 0, 0, #if CONFIG_MAX_PHYSICAL_CPUS > 1 - (0xa<<3)|4, (0xa<<3)|6, 0, 0, - (0xa<<3)|5, (0xa<<3)|7, 0, 0, + (0xa<<3)|4, (0xa<<3)|6, 0, 0, + (0xa<<3)|5, (0xa<<3)|7, 0, 0, #endif }; - int needs_reset; - unsigned bsp_apicid = 0; + int needs_reset; + unsigned bsp_apicid = 0; - struct mem_controller ctrl[8]; - unsigned nodes; + struct mem_controller ctrl[8]; + unsigned nodes; - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx); - } + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx); + } // post_code(0x32); - + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - + uart_init(); + console_init(); + /* Halt if there was a built in self test failure */ report_bist_failure(bist); - setup_s2891_resource_map(); + setup_s2891_resource_map(); #if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x18, 0)); dump_pci_device(PCI_DEV(0, 0x19, 0)); #endif needs_reset = setup_coherent_ht_domain(); - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); #endif - needs_reset |= ht_setup_chains_x(); + needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); + needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); -// soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\r\n"); + // soft_reset(); + } - allow_all_aps_stop(bsp_apicid); + allow_all_aps_stop(bsp_apicid); - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); enable_smbus(); #if 0 @@ -260,7 +246,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) sdram_initialize(nodes, ctrl); #if 0 - print_pci_devices(); + print_pci_devices(); #endif #if 0 diff --git a/src/mainboard/tyan/s2891/failover.c b/src/mainboard/tyan/s2891/failover.c index 1ec4137b5a..1d85c0129b 100644 --- a/src/mainboard/tyan/s2891/failover.c +++ b/src/mainboard/tyan/s2891/failover.c @@ -91,7 +91,6 @@ static unsigned long main(unsigned long bist) : "a" (bist) /* inputs */ : /* clobbers */ ); - fallback_image: return bist; } diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c index 8093f96332..1f8c8fe244 100644 --- a/src/mainboard/tyan/s2891/get_bus_conf.c +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -25,9 +25,9 @@ unsigned apicid_ck804; unsigned apicid_8131_1; unsigned apicid_8131_2; - -unsigned pci1234x[] = + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000000, @@ -39,7 +39,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -62,9 +62,9 @@ void get_bus_conf(void) { unsigned apicid_base; + unsigned sbdn; device_t dev; - unsigned sbdn; int i; if(get_bus_conf_done==1) return; //do it only once @@ -78,7 +78,7 @@ void get_bus_conf(void) } get_sblk_pci1234(); - + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain sbdn = sysconf.sbdn; @@ -91,51 +91,15 @@ void get_bus_conf(void) dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); if (dev) { bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_ck804_4++; -#endif } else { printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else bus_ck804_4 = 3; -#endif - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } - -#endif dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); if (dev) { @@ -160,7 +124,6 @@ void get_bus_conf(void) } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8131-1 */ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); if (dev) { @@ -192,13 +155,13 @@ void get_bus_conf(void) bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff; coprocdn = (sysconf.hcdn[2] & 0xff); } - + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_ck804 = apicid_base+0; apicid_8131_1 = apicid_base+1; diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c index f694c85924..c0e484a4f0 100644 --- a/src/mainboard/tyan/s2891/irq_tables.c +++ b/src/mainboard/tyan/s2891/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,22 +12,22 @@ #include -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } extern unsigned char bus_isa; @@ -37,13 +37,13 @@ extern unsigned char bus_ck804_2; //3 extern unsigned char bus_ck804_3; //4 extern unsigned char bus_ck804_4; //5 extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0;//7 -extern unsigned char bus_8131_1;//8 -extern unsigned char bus_8131_2;//9 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 extern unsigned char bus_coproc_0; extern unsigned sbdn3; -extern unsigned coprocdn; +extern unsigned coprocdn; extern void get_bus_conf(void); @@ -54,32 +54,32 @@ unsigned long write_pirq_routing_table(unsigned long addr) struct irq_info *pirq_info; unsigned slot_num; uint8_t *v; - - uint8_t sum=0; - int i; unsigned sbdn; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + uint8_t sum=0; + int i; + + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c sbdn = sysconf.sbdn; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_ck804_0; pirq->rtr_devfn = ((sbdn+9)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x10de; pirq->rtr_device = 0x005c; @@ -93,74 +93,74 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; //co processor - if(sysconf.pci1234[2] & 1) { - write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; + if(sysconf.pci1234[2] & 1) { + write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; } - + #if 0 //smbus write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //usb write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //audio write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //sata write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //nic - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot1 PCIE x16 - write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; //firewire - write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot2 pci - write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); - pirq_info++; slot_num++; -//Slot3 PCIE x16 - write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; //Slot4 PCIX - write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; //Slot5 PCIX - write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; //Slot6 PCIX - write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; #endif - - pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } printk_info("done.\n"); diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c index 3b90ff7e78..cf917eeb8e 100644 --- a/src/mainboard/tyan/s2891/mptable.c +++ b/src/mainboard/tyan/s2891/mptable.c @@ -13,9 +13,9 @@ extern unsigned char bus_ck804_2; //3 extern unsigned char bus_ck804_3; //4 extern unsigned char bus_ck804_4; //5 extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0;//7 -extern unsigned char bus_8131_1;//8 -extern unsigned char bus_8131_2;//9 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 extern unsigned apicid_ck804; extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; @@ -26,52 +26,52 @@ extern void get_bus_conf(void); void *smp_write_config_table(void *v) { - static const char sig[4] = "PCMP"; - static const char oem[8] = "TYAN "; - static const char productid[12] = "S2891 "; - struct mp_config_table *mc; + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2891 "; + struct mp_config_table *mc; unsigned sbdn; - unsigned char bus_num; + unsigned char bus_num; int i; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; - smp_write_processors(mc); + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; /*Bus: Bus ID Type*/ /* define bus and isa numbers */ - for(bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; + { + device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); @@ -80,33 +80,33 @@ void *smp_write_config_table(void *v) /* Initialize interrupt mapping*/ dword = 0x0120d218; - pci_write_config32(dev, 0x7c, dword); + pci_write_config32(dev, 0x7c, dword); - dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); - dword = 0x0000007d; - pci_write_config32(dev, 0x84, dword); + dword = 0x0000007d; + pci_write_config32(dev, 0x84, dword); - } + } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); - if (dev) { + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } - } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); - if (dev) { + } + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); } - } + } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1); @@ -122,53 +122,53 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); // Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 // Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 // Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 // Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 // Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 //Slot PCIE x16 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } //Slot PCIE x4 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); + } //Onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (7<<2)|0, apicid_ck804, 0x13); // 19 //Channel B of 8131 //Onboard Broadcom NIC - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 - } + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 + } //Channel A of 8131 -//Slot 4 PCIX 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24 - } +//Slot 4 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (0+i)%4); //24 + } //Slot 3 PCIX 133/100/66 SoDIMM PCI - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26 - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (0xa<<2)|i, apicid_8131_1, (2+i)%4); //26 + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2891/resourcemap.c b/src/mainboard/tyan/s2891/resourcemap.c index ad559b2ded..312ce03ad7 100644 --- a/src/mainboard/tyan/s2891/resourcemap.c +++ b/src/mainboard/tyan/s2891/resourcemap.c @@ -6,7 +6,6 @@ static void setup_s2891_resource_map(void) { static const unsigned int register_values[] = { -#if 1 /* Careful set limit registers before base registers which contain the enables */ /* DRAM Limit i Registers * F1:0x44 i = 0 @@ -80,8 +79,6 @@ static void setup_s2891_resource_map(void) PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, -#endif -#if 1 /* Memory-Mapped I/O Limit i Registers * F1:0x84 i = 0 @@ -158,8 +155,6 @@ static void setup_s2891_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, // PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, -#endif -#if 1 /* PCI I/O Limit i Registers * F1:0xC4 i = 0 @@ -220,7 +215,7 @@ static void setup_s2891_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, -#endif + /* Config Base and Limit i Registers * F1:0xE0 i = 0 * F1:0xE4 i = 1 @@ -257,12 +252,10 @@ static void setup_s2891_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration region i */ -#if 1 // PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, -#endif }; diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 90a6e023bf..f9cbfd40c6 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -14,9 +14,9 @@ end ## Compute the start location and size size of ## The coreboot bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_PAYLOAD = 1 +default CONFIG_ROM_PAYLOAD = 1 ## ## Compute where this copy of coreboot will start in the boot rom @@ -33,7 +33,7 @@ default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) default XIP_ROM_SIZE=65536 default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) -arch i386 end +arch i386 end ## @@ -43,10 +43,10 @@ arch i386 end driver mainboard.o #dir /drivers/ati/ragexl + #needed by irq_tables and mptable and acpi_tables object get_bus_conf.o - if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o @@ -54,46 +54,42 @@ if HAVE_PIRQ_TABLE object irq_tables.o end if USE_DCACHE_RAM if CONFIG_USE_INIT - -makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" + end +else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end end else + ## + ## Romcc output + ## + makerule ./failover.E + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end -makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" -end + makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + end -end -else - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end + makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end + makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + end end @@ -101,8 +97,8 @@ end ## Build our 16 bit and 32 bit coreboot entry code ## if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds end mainboardinit cpu/x86/32bit/entry32.inc @@ -113,25 +109,25 @@ if USE_DCACHE_RAM end if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds + ldscript /cpu/amd/car/cache_as_ram.lds end end ## ## Build our reset vector (This is where coreboot is entered) ## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end if USE_DCACHE_RAM else -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc + ### Should this be in the northbridge code? + mainboardinit arch/i386/lib/cpu_reset.inc end ## @@ -149,24 +145,24 @@ if USE_FALLBACK_IMAGE end if USE_DCACHE_RAM -## -## Setup Cache-As-Ram -## -mainboardinit cpu/amd/car/cache_as_ram.inc + ## + ## Setup Cache-As-Ram + ## + mainboardinit cpu/amd/car/cache_as_ram.inc end ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### if USE_FALLBACK_IMAGE -if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds -else - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc + end end ### @@ -178,187 +174,185 @@ end ## if USE_DCACHE_RAM -if CONFIG_USE_INIT -initobject auto.o -else -mainboardinit ./auto.inc -end + if CONFIG_USE_INIT + initobject auto.o + else + mainboardinit ./auto.inc + end else -# ROMCC -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit cpu/x86/mmx/enable_mmx.inc -mainboardinit cpu/x86/sse/enable_sse.inc -mainboardinit ./auto.inc -mainboardinit cpu/x86/sse/disable_sse.inc -mainboardinit cpu/x86/mmx/disable_mmx.inc + # ROMCC + mainboardinit cpu/x86/fpu/enable_fpu.inc + mainboardinit cpu/x86/mmx/enable_mmx.inc + mainboardinit cpu/x86/sse/enable_sse.inc + mainboardinit ./auto.inc + mainboardinit cpu/x86/sse/disable_sse.inc + mainboardinit cpu/x86/mmx/disable_mmx.inc end ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## if CONFIG_CHIP_NAME - config chip.h + config chip.h end - # sample config for tyan/s2892 chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end - + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on # northbridge - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/ck804 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627hf - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.6 off # CIR - io 0x60 = 0x100 - end - device pnp 2e.7 off # GAME_MIDI_GIPO1 - io 0x60 = 0x220 - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.8 off end # GPIO2 - device pnp 2e.9 off end # GPIO3 - device pnp 2e.a off end # ACPI - device pnp 2e.b on # HW Monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end + device pci 1.0 on # LPC + chip superio/winbond/w83627hf + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x220 + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.8 off end # GPIO2 + device pnp 2e.9 off end # GPIO3 + device pnp 2e.a off end # ACPI + device pnp 2e.b on # HW Monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end - end # SM - device pci 1.1 on # SM 1 + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end + end # SM + device pci 1.1 on # SM 1 chip drivers/i2c/adm1027 # ADT7463A CPU0 temp, SYS FAN 2/3/4 - device i2c 2d on end - end - chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 - device i2c 2e on end - end - chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN - device i2c 2a on end - end - chip drivers/generic/generic # Winbond HWM 0x92 - device i2c 49 on end - end - chip drivers/generic/generic # Winbond HWM 0x94 - device i2c 4a on end - end + device i2c 2d on end + end + chip drivers/i2c/adm1027 # ADT7463A CPU1 temp, CPU0/1 FAN , SYS FAN 1/5 + device i2c 2e on end + end + chip drivers/generic/generic # Winbond HWM 0x54 CPU0/1 VRM temp, SYSFAN 6/7, SB FAN + device i2c 2a on end + end + chip drivers/generic/generic # Winbond HWM 0x92 + device i2c 49 on end + end + chip drivers/generic/generic # Winbond HWM 0x94 + device i2c 4a on end + end end #SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on # PCI + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on # PCI # chip drivers/ati/ragexl chip drivers/pci/onboard device pci 6.0 on end register "rom_address" = "0xfff80000" end - chip drivers/pci/onboard - device pci 8.0 on end - end + chip drivers/pci/onboard + device pci 8.0 on end + end end - device pci a.0 off end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + device pci a.0 off end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 on end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end # Link 1 device pci 18.0 on - # devices on link 2, link 2 == LDT 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - chip drivers/pci/onboard - device pci 9.0 on end # broadcom 5704 + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 9.0 on end # broadcom 5704 device pci 9.1 on end - end + end end - device pci 1.1 on end - end + device pci 1.1 on end + end end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end end #mc0 - + end # pci_domain - -# chip drivers/generic/debug -# device pnp 0.0 off end -# device pnp 0.1 off end -# device pnp 0.2 off end -# device pnp 0.3 off end -# device pnp 0.4 off end + +# chip drivers/generic/debug +# device pnp 0.0 off end +# device pnp 0.1 off end +# device pnp 0.2 off end +# device pnp 0.3 off end +# device pnp 0.4 off end # device pnp 0.5 on end -# end +# end end # root_complex diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 9dbaf9dd31..381444418c 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -30,9 +30,9 @@ uses USE_OPTION_TABLE uses LB_CKS_RANGE_START uses LB_CKS_RANGE_END uses LB_CKS_LOC +uses MAINBOARD uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR -uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION @@ -76,7 +76,6 @@ default ROM_SIZE=524288 #1M bytes #default ROM_SIZE=1048576 - ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## @@ -131,6 +130,9 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +#1G memory hole +default HW_MEM_HOLE_SIZEK=0x100000 + ##HT Unit ID offset, default is 1, the typical one default HT_CHAIN_UNITID_BASE=0x0 @@ -143,9 +145,6 @@ default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 -#1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 - #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c index 917fb8414a..3bd9209f09 100644 --- a/src/mainboard/tyan/s2892/auto.c +++ b/src/mainboard/tyan/s2892/auto.c @@ -1,5 +1,5 @@ #define ASSEMBLY 1 - + #include #include #include @@ -33,20 +33,20 @@ static void hard_reset(void) { - set_bios_reset(); + set_bios_reset(); - /* full reset */ + /* full reset */ outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); + outb(0x0e, 0x0cf9); } static void soft_reset(void) { - set_bios_reset(); + set_bios_reset(); #if 1 - /* link reset */ + /* link reset */ outb(0x02, 0x0cf9); - outb(0x06, 0x0cf9); + outb(0x06, 0x0cf9); #endif } @@ -73,10 +73,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" - /* tyan does not want the default */ -#include "resourcemap.c" +/* tyan does not want the default */ +#include "resourcemap.c" -#define FIRST_CPU 1 +#define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -84,14 +84,13 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" //set GPIO to input mode #define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ #include "southbridge/nvidia/ck804/ck804_early_setup.c" - static void main(unsigned long bist) { static const struct mem_controller cpu[] = { @@ -119,32 +118,31 @@ static void main(unsigned long bist) #endif }; - int needs_reset; + int needs_reset; - if (bist == 0) { - k8_init_and_stop_secondaries(); - } + if (bist == 0) { + k8_init_and_stop_secondaries(); + } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - + uart_init(); + console_init(); + /* Halt if there was a built in self test failure */ // report_bist_failure(bist); - setup_s2892_resource_map(); + setup_s2892_resource_map(); needs_reset = setup_coherent_ht_domain(); - + needs_reset |= ht_setup_chains_x(); needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } enable_smbus(); diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c index 4b63ffed4e..f1a4bdb8a4 100644 --- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c @@ -1,6 +1,6 @@ #define ASSEMBLY 1 #define __ROMCC__ - + #include #include #include @@ -13,18 +13,8 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x80000;i++) { - outb(value, 0x80); - } -#endif -} -#endif - #include + #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -72,7 +62,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -83,10 +73,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" //set GPIO to input mode #define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ #include "southbridge/nvidia/ck804/ck804_early_setup.c" @@ -96,7 +86,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" - #if USE_FALLBACK_IMAGE == 1 #include "southbridge/nvidia/ck804/ck804_enable_rom.c" @@ -105,63 +94,64 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; + unsigned value; + uint32_t dword; + uint8_t byte; - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); } + void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { - unsigned last_boot_normal_x = last_boot_normal(); + unsigned last_boot_normal_x = last_boot_normal(); - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ - enumerate_ht_chain(); + enumerate_ht_chain(); - sio_setup(); + sio_setup(); - /* Setup the ck804 */ - ck804_enable_rom(); + /* Setup the ck804 */ + ck804_enable_rom(); - /* Is this a deliberate reset by the bios */ -// post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } normal_image: -// post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ + ); + fallback_image: -// post_code(0x25); +// post_code(0x25); ; } #endif @@ -172,91 +162,90 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); + failover_process(bist, cpu_init_detectedx); #endif - real_main(bist, cpu_init_detectedx); + real_main(bist, cpu_init_detectedx); } void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { - - static const uint16_t spd_addr [] = { - (0xa<<3)|0, (0xa<<3)|2, 0, 0, - (0xa<<3)|1, (0xa<<3)|3, 0, 0, + static const uint16_t spd_addr [] = { + (0xa<<3)|0, (0xa<<3)|2, 0, 0, + (0xa<<3)|1, (0xa<<3)|3, 0, 0, #if CONFIG_MAX_PHYSICAL_CPUS > 1 - (0xa<<3)|4, (0xa<<3)|6, 0, 0, - (0xa<<3)|5, (0xa<<3)|7, 0, 0, + (0xa<<3)|4, (0xa<<3)|6, 0, 0, + (0xa<<3)|5, (0xa<<3)|7, 0, 0, #endif - }; + }; - int needs_reset; - unsigned bsp_apicid = 0; + int needs_reset; + unsigned bsp_apicid = 0; - struct mem_controller ctrl[8]; - unsigned nodes; + struct mem_controller ctrl[8]; + unsigned nodes; - if (bist == 0) { + if (bist == 0) { init_cpus(cpu_init_detectedx); - } + } // post_code(0x32); - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); - setup_s2892_resource_map(); + setup_s2892_resource_map(); #if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); - dump_pci_device(PCI_DEV(0, 0x19, 0)); + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); #endif - needs_reset = setup_coherent_ht_domain(); + needs_reset = setup_coherent_ht_domain(); - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); #endif - needs_reset |= ht_setup_chains_x(); + needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); + needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } - allow_all_aps_stop(bsp_apicid); + allow_all_aps_stop(bsp_apicid); - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); - enable_smbus(); + enable_smbus(); #if 0 - dump_spd_registers(&cpu[0]); + dump_spd_registers(&cpu[0]); #endif #if 0 - dump_smbus_registers(); + dump_smbus_registers(); #endif - memreset_setup(); - sdram_initialize(nodes, ctrl); + memreset_setup(); + sdram_initialize(nodes, ctrl); #if 0 - print_pci_devices(); + print_pci_devices(); #endif #if 0 - dump_pci_devices(); + dump_pci_devices(); #endif - post_cache_as_ram(); + post_cache_as_ram(); } diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c index 2e8a5cd337..4f215ce9ae 100644 --- a/src/mainboard/tyan/s2892/get_bus_conf.c +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -25,7 +25,7 @@ unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -37,7 +37,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -75,7 +75,7 @@ void get_bus_conf(void) } get_sblk_pci1234(); - + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain sbdn = sysconf.sbdn; @@ -88,51 +88,15 @@ void get_bus_conf(void) dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); if (dev) { bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_ck804_4++; -#endif } else { printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else bus_ck804_4 = 3; -#endif - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } - -#endif dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); if (dev) { @@ -157,7 +121,6 @@ void get_bus_conf(void) } bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8131-1 */ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); if (dev) { @@ -190,8 +153,8 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(3); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_ck804 = apicid_base+0; apicid_8131_1 = apicid_base+1; diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c index a1b2b2ed37..bb5e8e0307 100644 --- a/src/mainboard/tyan/s2892/irq_tables.c +++ b/src/mainboard/tyan/s2892/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,22 +12,22 @@ #include -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } extern unsigned char bus_isa; @@ -37,9 +37,9 @@ extern unsigned char bus_ck804_2; //3 extern unsigned char bus_ck804_3; //4 extern unsigned char bus_ck804_4; //5 extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0;//7 -extern unsigned char bus_8131_1;//8 -extern unsigned char bus_8131_2;//9 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 extern unsigned sbdn3; @@ -54,30 +54,30 @@ unsigned long write_pirq_routing_table(unsigned long addr) uint8_t *v; unsigned sbdn; - uint8_t sum=0; - int i; + uint8_t sum=0; + int i; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c sbdn = sysconf.sbdn; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_ck804_0; pirq->rtr_devfn = ((sbdn+9)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x10de; pirq->rtr_device = 0x005c; @@ -91,69 +91,69 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + #if 0 //smbus write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //usb write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //audio write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //sata write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //nic - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot1 PCIE x16 - write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; //firewire - write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot2 pci - write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); - pirq_info++; slot_num++; -//Slot3 PCIE x16 - write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; //Slot4 PCIX - write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; //Slot5 PCIX - write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; //Slot6 PCIX - write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; #endif - - pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } printk_info("done.\n"); diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c index 8ce5434d5d..c46fa9add8 100644 --- a/src/mainboard/tyan/s2892/mptable.c +++ b/src/mainboard/tyan/s2892/mptable.c @@ -13,64 +13,65 @@ extern unsigned char bus_ck804_2; //3 extern unsigned char bus_ck804_3; //4 extern unsigned char bus_ck804_4; //5 extern unsigned char bus_ck804_5; //6 -extern unsigned char bus_8131_0;//7 -extern unsigned char bus_8131_1;//8 -extern unsigned char bus_8131_2;//9 +extern unsigned char bus_8131_0; //7 +extern unsigned char bus_8131_1; //8 +extern unsigned char bus_8131_2; //9 extern unsigned apicid_ck804; extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; extern unsigned sbdn3; +extern void get_bus_conf(void); void *smp_write_config_table(void *v) { - static const char sig[4] = "PCMP"; - static const char oem[8] = "TYAN "; - static const char productid[12] = "S2892 "; - struct mp_config_table *mc; + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2892 "; + struct mp_config_table *mc; unsigned sbdn; - unsigned char bus_num; + unsigned char bus_num; int i; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; - smp_write_processors(mc); + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; /*Bus: Bus ID Type*/ /* define bus and isa numbers */ - for(bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; + { + device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); @@ -79,33 +80,33 @@ void *smp_write_config_table(void *v) /* Initialize interrupt mapping*/ dword = 0x0120d218; - pci_write_config32(dev, 0x7c, dword); + pci_write_config32(dev, 0x7c, dword); - dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); - dword = 0x0000007d; - pci_write_config32(dev, 0x84, dword); + dword = 0x0000007d; + pci_write_config32(dev, 0x84, dword); - } + } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); - if (dev) { + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } - } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); - if (dev) { + } + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); } - } + } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1); @@ -121,74 +122,74 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); // Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 // Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 // Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 // Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 // Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 //Slot PCIE x16 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } //Slot PCIE x4 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_4, (0x00<<2)|i, apicid_ck804, 0x10 + (1+i+4-sbdn%4)%4); + } //Slot 2 PCI 32 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (4<<2)|i, apicid_ck804, 0x10+(0+i)%4); //16 - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (4<<2)|i, apicid_ck804, 0x10+(0+i)%4); //16 + } //Onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x12); // 18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (6<<2)|0, apicid_ck804, 0x12); // 18 //Onboard intel 10/100 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (8<<2)|0, apicid_ck804, 0x12); // 18 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (8<<2)|0, apicid_ck804, 0x12); // 18 //Channel B of 8131 //Onboard Broadcom NIC - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 - } + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (0+i)%4); //28 + } //SO DIMM PCI-X - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|i, apicid_8131_2, (0+i)%4); //28 - } + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (7<<2)|i, apicid_8131_2, (0+i)%4); //28 + } //Slot 4 PCIX 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (2+i)%4); //30 - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (2+i)%4); //30 + } //Channel A of 8131 -//Slot 5 PCIX 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|i, apicid_8131_1, (3+i)%4); //27 - } +//Slot 5 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|i, apicid_8131_1, (3+i)%4); //27 + } -//Slot 6 PCIX 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|i, apicid_8131_1, (2+i)%4); //26 - } +//Slot 6 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|i, apicid_8131_1, (2+i)%4); //26 + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); diff --git a/src/mainboard/tyan/s2892/resourcemap.c b/src/mainboard/tyan/s2892/resourcemap.c index b7d72db90e..04d3f59edd 100644 --- a/src/mainboard/tyan/s2892/resourcemap.c +++ b/src/mainboard/tyan/s2892/resourcemap.c @@ -6,7 +6,6 @@ static void setup_s2892_resource_map(void) { static const unsigned int register_values[] = { -#if 1 /* Careful set limit registers before base registers which contain the enables */ /* DRAM Limit i Registers * F1:0x44 i = 0 @@ -80,8 +79,6 @@ static void setup_s2892_resource_map(void) PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, -#endif -#if 1 /* Memory-Mapped I/O Limit i Registers * F1:0x84 i = 0 @@ -158,8 +155,6 @@ static void setup_s2892_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, // PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, -#endif -#if 1 /* PCI I/O Limit i Registers * F1:0xC4 i = 0 @@ -220,7 +215,7 @@ static void setup_s2892_resource_map(void) PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, -#endif + /* Config Base and Limit i Registers * F1:0xE0 i = 0 * F1:0xE4 i = 1 @@ -257,12 +252,10 @@ static void setup_s2892_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration region i */ -#if 1 // PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ // PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, -#endif }; diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 980c2570ad..019dd9be78 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -19,7 +19,7 @@ end ## Compute the start location and size size of ## The coreboot bootloader. ## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) ## @@ -39,14 +39,14 @@ default XIP_ROM_SIZE=65536 if USE_FAILOVER_IMAGE default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) else - if USE_FALLBACK_IMAGE - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) - else - default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) - end + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end end -arch i386 end +arch i386 end ## ## Build the objects we have code for in this directory. @@ -59,44 +59,45 @@ object get_bus_conf.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end #object reset.o + if USE_DCACHE_RAM - if CONFIG_USE_INIT - makerule ./auto.o - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" - end - else - makerule ./auto.inc - depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" - action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" - end +if CONFIG_USE_INIT + makerule ./auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o" end +else + makerule ./auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end +end else ## ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ../romcc" - action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + depends "$(MAINBOARD)/failover.c ../romcc" + action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ../romcc" - action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" + depends "$(MAINBOARD)/auto.c option_table.h ../romcc" + action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end end @@ -105,48 +106,47 @@ end ## Build our 16 bit and 32 bit coreboot entry code ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds - end + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end end mainboardinit cpu/x86/32bit/entry32.inc if USE_DCACHE_RAM - if CONFIG_USE_INIT - ldscript /cpu/x86/32bit/entry32.lds - end + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end - if CONFIG_USE_INIT - ldscript /cpu/amd/car/cache_as_ram.lds - end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end end - ## ## Build our reset vector (This is where coreboot is entered) ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end else - if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end end @@ -166,15 +166,15 @@ ldscript /southbridge/nvidia/ck804/id.lds ## ROMSTRAP table for CK804 ## if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - mainboardinit southbridge/nvidia/ck804/romstrap.inc - ldscript /southbridge/nvidia/ck804/romstrap.lds - end + if USE_FAILOVER_IMAGE + mainboardinit southbridge/nvidia/ck804/romstrap.inc + ldscript /southbridge/nvidia/ck804/romstrap.lds + end else - if USE_FALLBACK_IMAGE - mainboardinit southbridge/nvidia/ck804/romstrap.inc - ldscript /southbridge/nvidia/ck804/romstrap.lds - end + if USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/ck804/romstrap.inc + ldscript /southbridge/nvidia/ck804/romstrap.lds + end end if USE_DCACHE_RAM @@ -185,24 +185,24 @@ if USE_DCACHE_RAM end ### -### This is the early phase of coreboot startup +### This is the early phase of coreboot startup ### Things are delicate and we test to see if we should ### failover to another image. ### if HAVE_FAILOVER_BOOT - if USE_FAILOVER_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover_failover.lds + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end end - end else - if USE_FALLBACK_IMAGE - if USE_DCACHE_RAM - ldscript /arch/i386/lib/failover.lds - else - mainboardinit ./failover.inc + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + else + mainboardinit ./failover.inc + end end - end end ## @@ -228,7 +228,7 @@ else end ## -## Include the secondary Configuration files +## Include the secondary Configuration files ## if CONFIG_CHIP_NAME config chip.h @@ -236,177 +236,158 @@ end # sample config for tyan/s2895 chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_940 - device apic 0 on end - end - end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + end device pci_domain 0 on chip northbridge/amd/amdk8 #mc0 - device pci 18.0 on - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/ck804 + device pci 18.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/smsc/lpc47b397 - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.5 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.7 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.8 on # HW Monitor - io 0x60 = 0x290 - chip drivers/generic/generic # LM95221 CPU temp - device i2c 2b on end - end - chip drivers/generic/generic # EMCT03 - device i2c 54 on end - end + device pci 1.0 on # LPC + chip superio/smsc/lpc47b397 + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 end - device pnp 2e.a on # RT - io 0x60 = 0x400 + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 end - end + device pnp 2e.4 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.5 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.8 on # HW Monitor + io 0x60 = 0x290 + chip drivers/generic/generic # LM95221 CPU temp + device i2c 2b on end + end + chip drivers/generic/generic # EMCT03 + device i2c 54 on end + end + end + device pnp 2e.a on # RT + io 0x60 = 0x400 + end + end end - device pci 1.1 on # SM 0 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic #dimm 1-0-0 - device i2c 54 on end - end - chip drivers/generic/generic #dimm 1-0-1 - device i2c 55 on end - end - chip drivers/generic/generic #dimm 1-1-0 - device i2c 56 on end - end - chip drivers/generic/generic #dimm 1-1-1 - device i2c 57 on end - end + device pci 1.1 on # SM 0 + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic #dimm 1-0-0 + device i2c 54 on end + end + chip drivers/generic/generic #dimm 1-0-1 + device i2c 55 on end + end + chip drivers/generic/generic #dimm 1-1-0 + device i2c 56 on end + end + chip drivers/generic/generic #dimm 1-1-1 + device i2c 57 on end + end end # SM - device pci 1.1 on # SM 1 -#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus? -# chip drivers/generic/generic #PCIXA Slot1 -# device i2c 50 on end -# end -# chip drivers/generic/generic #PCIXB Slot1 -# device i2c 51 on end -# end -# chip drivers/generic/generic #PCIXB Slot2 -# device i2c 52 on end -# end -# chip drivers/generic/generic #PCI Slot1 -# device i2c 53 on end -# end -# chip drivers/generic/generic #Master CK804 PCI-E -# device i2c 54 on end -# end -# chip drivers/generic/generic #Slave CK804 PCI-E -# device i2c 55 on end -# end - chip drivers/generic/generic #MAC EEPROM - device i2c 51 on end - end + device pci 1.1 on # SM 1 + chip drivers/generic/generic #MAC EEPROM + device i2c 51 on end + end - end # SM - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # ACI - device pci 4.1 off end # MCI - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" + end # SM + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # ACI + device pci 4.1 off end # MCI + device pci 6.0 on end # IDE + device pci 7.0 on end # SATA 1 + device pci 8.0 on end # SATA 0 + device pci 9.0 on end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" # register "nic_rom_address" = "0xfff80000" # 64k # register "raid_rom_address" = "0xfff90000" register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1 register "mac_eeprom_addr" = "0x51" end - end # device pci 18.0 + end # device pci 18.0 device pci 18.0 on end # Link 1 device pci 18.0 on - # devices on link 2, link 2 == LDT 2 - chip southbridge/amd/amd8131 - # the on/off keyword is mandatory - device pci 0.0 on end - device pci 0.1 on end - device pci 1.0 on - chip drivers/pci/onboard - device pci 6.0 on end # lsi scsi - device pci 6.1 on end - end + # devices on link 2, link 2 == LDT 2 + chip southbridge/amd/amd8131 + # the on/off keyword is mandatory + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on + chip drivers/pci/onboard + device pci 6.0 on end # lsi scsi + device pci 6.1 on end + end end device pci 1.1 on end - end + end end # device pci 18.0 device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end - end # mc0 - + end #mc0 + chip northbridge/amd/amdk8 - device pci 19.0 on # northbridge - # devices on link 0, link 0 == LDT 0 - chip southbridge/nvidia/ck804 - device pci 0.0 on end # HT - device pci 1.0 on end # LPC - device pci 1.1 off end # SM - device pci 2.0 off end # USB 1.1 - device pci 2.1 off end # USB 2 - device pci 4.0 off end # ACI - device pci 4.1 off end # MCI - device pci 6.0 off end # IDE - device pci 7.0 off end # SATA 1 - device pci 8.0 off end # SATA 0 - device pci 9.0 off end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 - device pci c.0 off end # PCI E 2 - device pci d.0 off end # PCI E 1 - device pci e.0 on end # PCI E 0 + device pci 19.0 on # northbridge + # devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/ck804 + device pci 0.0 on end # HT + device pci 1.0 on end # LPC + device pci 1.1 off end # SM + device pci 2.0 off end # USB 1.1 + device pci 2.1 off end # USB 2 + device pci 4.0 off end # ACI + device pci 4.1 off end # MCI + device pci 6.0 off end # IDE + device pci 7.0 off end # SATA 1 + device pci 8.0 off end # SATA 0 + device pci 9.0 off end # PCI + device pci a.0 on end # NIC + device pci b.0 off end # PCI E 3 + device pci c.0 off end # PCI E 2 + device pci d.0 off end # PCI E 1 + device pci e.0 on end # PCI E 0 # register "nic_rom_address" = "0xfff80000" # 64k - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end # device pci 19.0 - + register "mac_eeprom_smbus" = "3" + register "mac_eeprom_addr" = "0x51" + end + end # device pci 19.0 + device pci 19.0 on end device pci 19.0 on end device pci 19.1 on end @@ -414,15 +395,15 @@ chip northbridge/amd/amdk8/root_complex device pci 19.3 on end end end # PCI domain - -# chip drivers/generic/debug -# device pnp 0.0 off end # chip name -# device pnp 0.1 off end # pci_regs_all -# device pnp 0.2 off end # mem -# device pnp 0.3 off end # cpuid -# device pnp 0.4 on end # smbus_regs_all -# device pnp 0.5 off end # dual core msr -# device pnp 0.6 off end # cache size -# device pnp 0.7 off end # tsc -# end -end #root_complex + +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 off end # pci_regs_all +# device pnp 0.2 off end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# end +end # root_complex diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index 84922a399a..b67642cd6a 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -37,7 +37,7 @@ uses MAINBOARD uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID -uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB @@ -166,7 +166,7 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #Opteron K8 1G HT Support default K8_HT_FREQ_1G_SUPPORT=1 -#VGA +#VGA Console default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c index 2aa19115ab..a4b86627e1 100644 --- a/src/mainboard/tyan/s2895/auto.c +++ b/src/mainboard/tyan/s2895/auto.c @@ -1,5 +1,5 @@ #define ASSEMBLY 1 - + #include #include #include @@ -37,20 +37,20 @@ static void hard_reset(void) { - set_bios_reset(); + set_bios_reset(); - /* full reset */ + /* full reset */ outb(0x0a, 0x0cf9); - outb(0x0e, 0x0cf9); + outb(0x0e, 0x0cf9); } static void soft_reset(void) { - set_bios_reset(); + set_bios_reset(); #if 1 - /* link reset */ + /* link reset */ outb(0x02, 0x0cf9); - outb(0x06, 0x0cf9); + outb(0x06, 0x0cf9); #endif } @@ -63,7 +63,7 @@ static void memreset(int controllers, const struct mem_controller *ctrl) } #define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) - + #define SUPERIO_GPIO_IO_BASE 0x400 static void sio_gpio_setup(void){ @@ -71,13 +71,9 @@ static void sio_gpio_setup(void){ unsigned value; // lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); // Already enable in failover.c - -#if 1 lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); -#endif - } static inline void activate_spd_rom(const struct mem_controller *ctrl) @@ -91,23 +87,14 @@ static inline int spd_read_byte(unsigned device, unsigned address) } #define QRANK_DIMM_SUPPORT 1 - #include "northbridge/amd/amdk8/raminit.c" -#if 0 - #define ENABLE_APIC_EXT_ID 1 - #define APIC_ID_OFFSET 0x10 - #define LIFT_BSP_APIC_ID 0 -#else - #define ENABLE_APIC_EXT_ID 0 -#endif #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" /* tyan does not want the default */ #include "resourcemap.c" - -#define FIRST_CPU 1 +#define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -116,18 +103,16 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define CK804_USE_NIC 1 #define CK804_USE_ACI 1 #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" - //set GPIO to input mode #define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ - -#include "southbridge/nvidia/ck804/ck804_early_setup.c" + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ +#include "southbridge/nvidia/ck804/ck804_early_setup.c" static void main(unsigned long bist) { @@ -156,41 +141,37 @@ static void main(unsigned long bist) #endif }; - int needs_reset; + int needs_reset; - if (bist == 0) { - k8_init_and_stop_secondaries(); - } + if (bist == 0) { + k8_init_and_stop_secondaries(); + } - // post_code(0x32); + lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); - lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - /* Halt if there was a built in self test failure */ report_bist_failure(bist); sio_gpio_setup(); - setup_s2895_resource_map(); + setup_s2895_resource_map(); needs_reset = setup_coherent_ht_domain(); - needs_reset |= ht_setup_chains_x(); + needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } + needs_reset |= ck804_early_setup_x(); + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } enable_smbus(); memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); - } diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c index 576bebebfa..99afbd3bc2 100644 --- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -1,18 +1,16 @@ #define ASSEMBLY 1 #define __ROMCC__ - #define K8_ALLOCATE_IO_RANGE 1 //#define K8_SCAN_PCI_BUS 1 - +//used by raminit #define QRANK_DIMM_SUPPORT 1 #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 #endif - #include #include #include @@ -27,17 +25,6 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#if 0 -static void post_code(uint8_t value) { -#if 1 - int i; - for(i=0;i<0x8000;i++) { - outb(value, 0x80); - } -#endif -} -#endif - #include #include "northbridge/amd/amdk8/incoherent_ht.c" @@ -68,7 +55,6 @@ static void post_code(uint8_t value) { #include "cpu/amd/mtrr/amd_earlymtrr.c" - #include "northbridge/amd/amdk8/setup_resource_map.c" #define SERIAL_DEV PNP_DEV(0x2e, LPC47B397_SP1) @@ -81,15 +67,14 @@ static void memreset(int controllers, const struct mem_controller *ctrl) { } - static void sio_gpio_setup(void){ - unsigned value; + unsigned value; - /*Enable onboard scsi*/ - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); + /*Enable onboard scsi*/ + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1<<7)|(0<<2)|(0<<1)|(0<<0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1<<1))); } @@ -103,13 +88,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } - #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" /* tyan does not want the default */ -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/dualcore/dualcore.c" @@ -122,12 +106,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) //set GPIO to input mode #define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ #include "southbridge/nvidia/ck804/ck804_early_setup_car.c" @@ -144,105 +128,103 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" - static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; + unsigned value; + uint32_t dword; + uint8_t byte; - - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<29)|(1<<0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); - value &= 0xbf; - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<29)|(1<<0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); + + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); } void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { - unsigned last_boot_normal_x = last_boot_normal(); + unsigned last_boot_normal_x = last_boot_normal(); - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } + /* Is this a cpu only reset? or Is this a secondary cpu? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) { + goto normal_image; + } else { + goto fallback_image; + } + } - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ - enumerate_ht_chain(); + enumerate_ht_chain(); - sio_setup(); + sio_setup(); - /* Setup the ck804 */ - ck804_enable_rom(); + /* Setup the ck804 */ + ck804_enable_rom(); - /* Is this a deliberate reset by the bios */ -// post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } + /* Is this a deliberate reset by the bios */ +// post_code(0x22); + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } normal_image: -// post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); +// post_code(0x23); + __asm__ volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ + ); fallback_image: -// post_code(0x25); +// post_code(0x25); #if HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) #endif ; } #endif + void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { -#if HAVE_FAILOVER_BOOT==1 - #if USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif +#if HAVE_FAILOVER_BOOT==1 + #if USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #endif #else - #if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); + #if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif #endif + real_main(bist, cpu_init_detectedx); + } #if USE_FAILOVER_IMAGE==0 @@ -250,38 +232,38 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { - (0xa<<3)|0, (0xa<<3)|2, 0, 0, - (0xa<<3)|1, (0xa<<3)|3, 0, 0, + (0xa<<3)|0, (0xa<<3)|2, 0, 0, + (0xa<<3)|1, (0xa<<3)|3, 0, 0, #if CONFIG_MAX_PHYSICAL_CPUS > 1 - (0xa<<3)|4, (0xa<<3)|6, 0, 0, - (0xa<<3)|5, (0xa<<3)|7, 0, 0, + (0xa<<3)|4, (0xa<<3)|6, 0, 0, + (0xa<<3)|5, (0xa<<3)|7, 0, 0, #endif }; - int needs_reset; - unsigned bsp_apicid = 0; + int needs_reset; + unsigned bsp_apicid = 0; - struct mem_controller ctrl[8]; - unsigned nodes; + struct mem_controller ctrl[8]; + unsigned nodes; - if (bist == 0) { - bsp_apicid = init_cpus(cpu_init_detectedx); - } + if (bist == 0) { + bsp_apicid = init_cpus(cpu_init_detectedx); + } // post_code(0x32); lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - + uart_init(); + console_init(); + /* Halt if there was a built in self test failure */ report_bist_failure(bist); sio_gpio_setup(); - setup_mb_resource_map(); + setup_mb_resource_map(); #if 0 - dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x18, 0)); dump_pci_device(PCI_DEV(0, 0x19, 0)); #endif @@ -289,25 +271,25 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); + // It is said that we should start core1 after all core0 launched + start_other_cores(); wait_all_other_cores_started(bsp_apicid); #endif - needs_reset |= ht_setup_chains_x(); + needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); + needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - // soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\r\n"); + // soft_reset(); + } - allow_all_aps_stop(bsp_apicid); + allow_all_aps_stop(bsp_apicid); - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); enable_smbus(); #if 0 diff --git a/src/mainboard/tyan/s2895/failover.c b/src/mainboard/tyan/s2895/failover.c index 537abd43f4..87f4685ae8 100644 --- a/src/mainboard/tyan/s2895/failover.c +++ b/src/mainboard/tyan/s2895/failover.c @@ -50,14 +50,12 @@ static void sio_setup(void) } - #if CONFIG_LOGICAL_CPUS==1 #include "cpu/amd/dualcore/dualcore_id.c" #else #include "cpu/amd/model_fxx/node_id.c" #endif - static unsigned long main(unsigned long bist) { /* Is this a cpu only reset? */ diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c index 4d1451a92f..c44095b2c3 100644 --- a/src/mainboard/tyan/s2895/get_bus_conf.c +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -9,7 +9,6 @@ #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default unsigned char bus_isa; @@ -33,7 +32,7 @@ unsigned apicid_8131_2; unsigned apicid_ck804b; -unsigned pci1234x[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -45,7 +44,7 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -56,6 +55,7 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; + unsigned sbdn3; unsigned sbdnb; @@ -97,63 +97,15 @@ void get_bus_conf(void) dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); if (dev) { bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; -#else bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); bus_ck804_5++; -#endif } else { printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); bus_ck804_1 = 2; -#if 0 - bus_ck804_2 = 3; -#else bus_ck804_5 = 3; -#endif - } -#if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); - - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } - - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } -#endif dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); if (dev) { @@ -194,56 +146,6 @@ void get_bus_conf(void) if(sysconf.pci1234[2] & 0x0f) { //if the second cpu is installed bus_ck804b_0 = (sysconf.pci1234[2]>>16) & 0xff; -#if 0 - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0)); - if (dev) { - bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_2++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); - - bus_ck804b_1 = bus_ck804b_0+1; - bus_ck804b_2 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0)); - if (dev) { - bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_3++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); - - bus_ck804b_2 = bus_ck804b_0+1; - bus_ck804b_3 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0)); - if (dev) { - bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_4++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); - - bus_ck804b_4 = bus_ck804b_3+1; - } - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0)); - if (dev) { - bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_5++; - } - else { - printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); - - bus_ck804b_5 = bus_ck804b_4+1; - } -#endif dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0)); if (dev) { @@ -253,10 +155,7 @@ void get_bus_conf(void) } else { printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); -#if 1 bus_ck804b_5 = bus_ck804b_4+1; -#endif - bus_isa = bus_ck804b_5+1; } } @@ -265,12 +164,11 @@ void get_bus_conf(void) /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 apicid_base = get_apicid_base(4); -#else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif apicid_ck804 = apicid_base+0; apicid_8131_1 = apicid_base+1; apicid_8131_2 = apicid_base+2; apicid_ck804b = apicid_base+3; - } diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c index 1779644c12..cc18119120 100644 --- a/src/mainboard/tyan/s2895/irq_tables.c +++ b/src/mainboard/tyan/s2895/irq_tables.c @@ -1,4 +1,4 @@ -/* This file was generated by getpir.c, do not modify! +/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up @@ -12,22 +12,22 @@ #include -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } extern unsigned char bus_ck804_0; //1 @@ -50,6 +50,8 @@ extern unsigned char bus_ck804b_5;//f extern unsigned sbdn3; extern unsigned sbdnb; +extern void get_bus_conf(void); + unsigned long write_pirq_routing_table(unsigned long addr) { @@ -59,30 +61,30 @@ unsigned long write_pirq_routing_table(unsigned long addr) uint8_t *v; unsigned sbdn; - uint8_t sum=0; - int i; + uint8_t sum=0; + int i; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c sbdn = sysconf.sbdn; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be betweeen 0xf0000 & 0x100000 */ - printk_info("Writing IRQ routing tables to 0x%x...", addr); + /* This table must be betweeen 0xf0000 & 0x100000 */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); pirq = (void *)(addr); v = (uint8_t *)(addr); - + pirq->signature = PIRQ_SIGNATURE; pirq->version = PIRQ_VERSION; - + pirq->rtr_bus = bus_ck804_0; pirq->rtr_devfn = ((sbdn+9)<<3)|0; pirq->exclusive_irqs = 0; - + pirq->rtr_vendor = 0x10de; pirq->rtr_device = 0x005c; @@ -96,81 +98,81 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge - write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - - if(sysconf.pci1234[2] & 0xf) { - //second pci beidge - write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + + if(sysconf.pci1234[2] & 0xf) { + //second pci beidge + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); + pirq_info++; slot_num++; } #if 0 //smbus write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+1)<<3)|0, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //usb write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+2)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //audio write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+4)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //sata write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+7)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + pirq_info++; slot_num++; //sata - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+8)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //nic - write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_0, ((sbdn+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot1 PCIE x16 - write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 1, 0); + pirq_info++; slot_num++; //firewire - write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_1, (0x5<<3)|0, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot2 pci - write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); - pirq_info++; slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; -//Slot3 PCIE x16 - write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_ck804_1, (0x4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 2, 0); + pirq_info++; slot_num++; +//nic + write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+0xa)<<3)|0, 0x1, 0xdef8, 0, 0, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; +//Slot3 PCIE x16 + write_pirq_info(pirq_info, bus_ck804b_5, (0<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 3, 0); + pirq_info++; slot_num++; //Slot4 PCIX - write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 4, 0); + pirq_info++; slot_num++; //Slot5 PCIX - write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (9<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 5, 0); + pirq_info++; slot_num++; //onboard scsi - write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_2, (6<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0, 0, 0, 0, 0, 0); + pirq_info++; slot_num++; //Slot6 PCIX - write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, bus_8131_1, (4<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 6, 0); + pirq_info++; slot_num++; #endif - - pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } printk_info("done.\n"); diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c index 3f286d05b9..1591ec9e64 100644 --- a/src/mainboard/tyan/s2895/mptable.c +++ b/src/mainboard/tyan/s2895/mptable.c @@ -30,54 +30,56 @@ extern unsigned apicid_ck804b; extern unsigned sbdn3; extern unsigned sbdnb; +extern void get_bus_conf(void); + void *smp_write_config_table(void *v) { - static const char sig[4] = "PCMP"; - static const char oem[8] = "TYAN "; - static const char productid[12] = "S2895 "; - struct mp_config_table *mc; + static const char sig[4] = "PCMP"; + static const char oem[8] = "TYAN "; + static const char productid[12] = "S2895 "; + struct mp_config_table *mc; unsigned sbdn; - unsigned char bus_num; + unsigned char bus_num; int i; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - memset(mc, 0, sizeof(*mc)); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); - memcpy(mc->mpc_signature, sig, sizeof(sig)); - mc->mpc_length = sizeof(*mc); /* initially just the header */ - mc->mpc_spec = 0x04; - mc->mpc_checksum = 0; /* not yet computed */ - memcpy(mc->mpc_oem, oem, sizeof(oem)); - memcpy(mc->mpc_productid, productid, sizeof(productid)); - mc->mpc_oemptr = 0; - mc->mpc_oemsize = 0; - mc->mpc_entry_count = 0; /* No entries yet... */ - mc->mpc_lapic = LAPIC_ADDR; - mc->mpe_length = 0; - mc->mpe_checksum = 0; - mc->reserved = 0; + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; - smp_write_processors(mc); + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; /*Bus: Bus ID Type*/ /* define bus and isa numbers */ - for(bus_num = 0; bus_num < bus_isa; bus_num++) { - smp_write_bus(mc, bus_num, "PCI "); - } - smp_write_bus(mc, bus_isa, "ISA "); + for(bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); /*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; + { + device_t dev; struct resource *res; uint32_t dword; - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); @@ -86,53 +88,53 @@ void *smp_write_config_table(void *v) /* Initialize interrupt mapping*/ dword = 0x0120d218; - pci_write_config32(dev, 0x7c, dword); + pci_write_config32(dev, 0x7c, dword); - dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x12008a00; + pci_write_config32(dev, 0x80, dword); - dword = 0x00080d7d; - pci_write_config32(dev, 0x84, dword); + dword = 0x00080d7d; + pci_write_config32(dev, 0x84, dword); - } + } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); - if (dev) { + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_1, 0x11, res->base); } - } - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); - if (dev) { + } + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_0); if (res) { smp_write_ioapic(mc, apicid_8131_2, 0x11, res->base); } - } + } if(sysconf.pci1234[2] & 0xf) { - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); - if (dev) { + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); + if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); if (res) { smp_write_ioapic(mc, apicid_ck804b, 0x11, res->base); } dword = 0x0000d218; - pci_write_config32(dev, 0x7c, dword); + pci_write_config32(dev, 0x7c, dword); - dword = 0x00000000; - pci_write_config32(dev, 0x80, dword); + dword = 0x00000000; + pci_write_config32(dev, 0x80, dword); - dword = 0x00000d00; - pci_write_config32(dev, 0x84, dword); + dword = 0x00000d00; + pci_write_config32(dev, 0x84, dword); - } + } } } - + /*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_ck804, 0x0); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_ck804, 0x1); @@ -148,73 +150,73 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_ck804, 0xf); // Onboard ck804 smbus - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+1)<<2)|1, apicid_ck804, 0xa); // 10 // Onboard ck804 USB 1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|0, apicid_ck804, 0x15); // 21 // Onboard ck804 USB 2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+2)<<2)|1, apicid_ck804, 0x14); // 20 // Onboard ck804 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn+4)<<2)|0, apicid_ck804, 0x14); // 20 // Onboard ck804 SATA 0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +7)<<2)|0, apicid_ck804, 0x17); // 23 // Onboard ck804 SATA 1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +8)<<2)|0, apicid_ck804, 0x16); // 22 // Onboard ck804 NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_0, ((sbdn +0x0a)<<2)|0, apicid_ck804, 0x15); // 21 //Slot 1 PCIE x16 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_5, (0x00<<2)|i, apicid_ck804, 0x10 + (2+i+4-sbdn%4)%4); + } //Onboard Firewire - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x05<<2)|0, apicid_ck804, 0x13); // 19 //Slot 2 PCI 32 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); + } if(sysconf.pci1234[2] & 0xf) { //Onboard ck804b NIC - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 //Slot 3 PCIE x16 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_5, (0x00<<2)|i, apicid_ck804b, 0x10 + (2+i+4-sbdnb%4)%4); + } } //Channel B of 8131 //Slot 4 PCI-X 100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4); - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (4<<2)|i, apicid_8131_2, (0+i)%4); + } //Slot 5 PCIX 100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29 - } + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (9<<2)|i, apicid_8131_2, (1+i)%4); // 29 + } //OnBoard LSI SCSI - for(i=0;i<2;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30 - } + for(i=0;i<2;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (2+i)%4); //30 + } //Channel A of 8131 -//Slot 6 PCIX 133/100/66 - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24 - } +//Slot 6 PCIX 133/100/66 + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|i, apicid_8131_1, (0+i)%4); //24 + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);