mediatek: Use the 64-bit timer

GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about
330 seconds (0xffffffff / 13MHz). Timer and delay functions will not
work properly if the counter overflows. To fix that we should use the
64-bit timer (GPT6).

BUG=b:80501386
BRANCH=none
Test=emerge-elm coreboot; emerge-kukui coreboot

Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: You-Cheng Syu <youcheng@google.com>

payloads/libpayload/drivers/timer/Kconfig

@@ -54,7 +54,7 @@ config TIMER_IMG_PISTACHIO
 	bool "Timer for IMG Pistachio"
 
 config TIMER_MTK
-	bool "Timer for MediaTek MT8173"
+	bool "Timer for MediaTek"
 
 endchoice
 
@@ -77,7 +77,7 @@ config TIMER_GENERIC_REG
 	default 0x004A2000 if TIMER_IPQ40XX
 	default 0x0200A028 if TIMER_IPQ806X
 	default 0x101C0100 if TIMER_MCT
-	default 0x10008048 if TIMER_MTK
+	default 0x10008068 if TIMER_MTK
 	default 0xff810028 if TIMER_RK3288
 	default 0xff850008 if TIMER_RK3399
 	default 0x60005010 if TIMER_TEGRA_1US
@@ -89,6 +89,7 @@ config TIMER_GENERIC_HIGH_REG
 	hex "Generic Timer High Register Address"
 	default 0x004A2004 if TIMER_IPQ40XX
 	default 0x101C0104 if TIMER_MCT
+	default 0x10008078 if TIMER_MTK
 	default 0xff81002C if TIMER_RK3288
 	default 0xff85000C if TIMER_RK3399
 	default 0x0

src/soc/mediatek/common/include/soc/timer.h

@@ -19,18 +19,21 @@
 #include <soc/addressmap.h>
 #include <types.h>
 
-#define GPT4_MHZ	13
+#define GPT_MHZ	13
 
 struct mtk_gpt_regs {
-	u32 reserved[16];
+	u32 reserved1[24];
-	u32 gpt4_con;
+	u32 gpt6_con;
-	u32 gpt4_clk;
+	u32 gpt6_clk;
-	u32 gpt4_cnt;
+	u32 gpt6_cnt_l;
+	u32 reserved2[3];
+	u32 gpt6_cnt_h;
 };
 
-check_member(mtk_gpt_regs, gpt4_con, 0x0040);
+check_member(mtk_gpt_regs, gpt6_con, 0x0060);
-check_member(mtk_gpt_regs, gpt4_clk, 0x0044);
+check_member(mtk_gpt_regs, gpt6_clk, 0x0064);
-check_member(mtk_gpt_regs, gpt4_cnt, 0x0048);
+check_member(mtk_gpt_regs, gpt6_cnt_l, 0x0068);
+check_member(mtk_gpt_regs, gpt6_cnt_h, 0x0078);
 
 enum {
 	GPT_CON_EN        = 0x01,

src/soc/mediatek/common/timer.c

@@ -25,21 +25,34 @@ static struct mtk_gpt_regs *const mtk_gpt = (void *)GPT_BASE;
 
 __weak void timer_prepare(void) { /* do nothing */ }
 
+static uint64_t timer_raw_value(void)
+{
+	/*
+	 * According to "General-Purpose Timer (GPT).pdf", The read operation of
+	 * gpt6_cnt_l will make gpt6_cnt_h fixed until the next read operation
+	 * of gpt6_cnt_l. Therefore, we must read gpt6_cnt_l before gpt6_cnt_h.
+	 */
+	uint32_t low = read32(&mtk_gpt->gpt6_cnt_l);
+	uint32_t high = read32(&mtk_gpt->gpt6_cnt_h);
+
+	return low | (uint64_t)high << 32;
+}
+
 void timer_monotonic_get(struct mono_time *mt)
 {
-	mono_time_set_usecs(mt, read32(&mtk_gpt->gpt4_cnt) / GPT4_MHZ);
+	mono_time_set_usecs(mt, timer_raw_value() / GPT_MHZ);
 }
 
 void init_timer(void)
 {
 	timer_prepare();
 
-	/* Disable GPT4 and clear the counter */
+	/* Disable timer and clear the counter */
-	clrbits_le32(&mtk_gpt->gpt4_con, GPT_CON_EN);
+	clrbits_le32(&mtk_gpt->gpt6_con, GPT_CON_EN);
-	setbits_le32(&mtk_gpt->gpt4_con, GPT_CON_CLR);
+	setbits_le32(&mtk_gpt->gpt6_con, GPT_CON_CLR);
 
 	/* Set clock source to system clock and set clock divider to 1 */
-	write32(&mtk_gpt->gpt4_clk, GPT_SYS_CLK | GPT_CLK_DIV1);
+	write32(&mtk_gpt->gpt6_clk, GPT_SYS_CLK | GPT_CLK_DIV1);
-	/* Set operation mode to FREERUN mode and enable GTP4 */
+	/* Set operation mode to FREERUN mode and enable timer */
-	write32(&mtk_gpt->gpt4_con, GPT_CON_EN | GPT_MODE_FREERUN);
+	write32(&mtk_gpt->gpt6_con, GPT_CON_EN | GPT_MODE_FREERUN);
 }

src/soc/mediatek/mt8173/timer.c

@@ -31,5 +31,5 @@ void timer_prepare(void)
 	 */
 	write32(&mt8173_mcucfg->xgpt_idx, 0);
 	/* Set clock mode to 13Mhz and enable XGPT */
-	write32(&mt8173_mcucfg->xgpt_ctl, (0x1 | ((26 / GPT4_MHZ) << 8)));
+	write32(&mt8173_mcucfg->xgpt_ctl, (0x1 | ((26 / GPT_MHZ) << 8)));
 }