This patch contains some significant updates to the i82801gx component and will

be required for a series of later patches. Roughly it contains:

* fixed SMBus driver (was not compiled in before)
* fixed S-ATA/P-ATA combination
* Added warnings to drivers being called with a NULL dev->chip_info 
* Set subsystem ids for those boards that have none specified in Options.lb
* Fix license headers. The code was originally released under GPL v2 but
  some files sneaked in with a v2 or later header.
* some attempts to fix azalia/Intel HDA.. not working yet
* clean up and fix pci bridge handling code
* Add Config based GPI handling to LPC driver
* Add HPET enable function
* Enable clock gating where appropriate
* first attempt at USB debug console support (not working yet)
* Add required options to kontron board
* many other minor changes

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Myles Watson <mylesgw@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/kontron/986lcd-m/Config.lb

@@ -190,12 +190,18 @@ chip northbridge/intel/i945
                 chip southbridge/intel/i82801gx
 			register "pirqa_routing" = "0x05"
 			register "pirqb_routing" = "0x07"
-			register "pirqc_routing" = "0x06"
+			register "pirqc_routing" = "0x05"
 			register "pirqd_routing" = "0x07"
 			register "pirqe_routing" = "0x80"
 			register "pirqf_routing" = "0x80"
 			register "pirqg_routing" = "0x80"
-			register "pirqh_routing" = "0x05"
+			register "pirqh_routing" = "0x06"
+
+			# GPI routing
+			#  0 No effect (default)
+			#  1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+			#  2 SCI (if corresponding GPIO_EN bit is also set)
+			register "gpi13_routing" = "1"
 
                         register "ide_legacy_combined" = "0x1"
                         register "ide_enable_primary" = "0x1"

src/mainboard/kontron/986lcd-m/Options.lb

@@ -69,6 +69,9 @@ uses XIP_ROM_SIZE
 uses HAVE_HARD_RESET
 uses HAVE_SMI_HANDLER
 uses CONFIG_PCIE_CONFIGSPACE_HOLE
+uses MMCONF_SUPPORT
+uses MMCONF_BASE_ADDRESS
+uses CONFIG_GFXUMA
 #
 uses MAINBOARD
 uses MAINBOARD_PART_NUMBER
@@ -86,7 +89,9 @@ uses TTYS0_LCS
 uses DEFAULT_CONSOLE_LOGLEVEL
 uses MAXIMUM_CONSOLE_LOGLEVEL
 uses CONFIG_CONSOLE_VGA
+uses CONFIG_VGA_ROM_RUN
 uses CONFIG_PCI_ROM_RUN
+uses DEBUG
 # Toolchain
 uses CC
 uses HOSTCC
@@ -145,6 +150,13 @@ default HAVE_SMI_HANDLER=1
 ##
 
 default CONFIG_PCIE_CONFIGSPACE_HOLE=1
+default MMCONF_SUPPORT=1
+default MMCONF_BASE_ADDRESS=0xf0000000
+
+##
+## UMA
+##
+default CONFIG_GFXUMA=1
 
 ##
 ## Build code to export a programmable irq routing table
@@ -163,7 +175,7 @@ default HAVE_MP_TABLE=1
 ##
 default HAVE_ACPI_TABLES=1
 default HAVE_MAINBOARD_RESOURCES=1
-default HAVE_HIGH_TABLES=0
+default HAVE_HIGH_TABLES=1
 
 ##
 ## Build code to export a CMOS option table
@@ -179,7 +191,12 @@ default LB_CKS_LOC=123
 
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
-default CONFIG_PCI_ROM_RUN=1
+# There are some network option roms that don't work with
+# coreboot's x86emu. Thus, we only execute the VGA option rom
+# for now:
+default CONFIG_VGA_ROM_RUN=1
+default CONFIG_PCI_ROM_RUN=0
+default DEBUG=0
 
 ##
 ## Build code for SMP support

src/southbridge/intel/i82801gx/Config.lb

@@ -5,8 +5,7 @@
 ##
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
+## the Free Software Foundation; version 2 of the License.
-## (at your option) any later version.
 ##
 ## This program is distributed in the hope that it will be useful,
 ## but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -30,6 +29,7 @@ driver i82801gx_nic.o
 driver i82801gx_pci.o
 driver i82801gx_pcie.o
 driver i82801gx_sata.o
+driver i82801gx_smbus.o
 driver i82801gx_usb.o
 driver i82801gx_usb_ehci.o
 

src/southbridge/intel/i82801gx/IOMAP

@@ -1,35 +0,0 @@
-Non-automatic IO-Addresses
---------------------------
-
-The following dynamic IO BARs are used on the ICH7 for the Kontron Default BIOS:
-
-GPIOBASE	0x480 (64 bytes)
-PMBASE		0x800 (128 bytes)
-SMBASE		0x400 (32 bytes)
-HWMON		0xa00 (??)
-
-The following dynamic IO BARs are used on the ICH7 for the Getac Default BIOS:
-
-GPIOBASE	0x1180 (64 bytes)
-PMBASE		0x1000 (128 bytes)
-SMBASE		0x18e0 (32 bytes)
-
-The Getac also needs an IO Trapped area of 0x0C bytes (defaults to 0x800)
-
-coreboot:
-GPIOBASE	0x480 (64 bytes)
-PMBASE		0x500 (128 bytes)
-SMBASE		0x400 (32 bytes)
-HWMON		0xa00 (??)
-
-
-
-NOTE: Coreboot sets the SMBASE to 0xf00 in auto.c. But it gets relocated 
-in stage2 because its a "normal BAR" (to 0x2080 in one case here). 
-
-This is not unhealthy but at least confusing. We should provide a method to
-nail down certain resources for stage2. 
-
-For a list of static I/O space allocation look at 6.3.1 of the ICH7 Family
-Datasheet.
-

src/southbridge/intel/i82801gx/chip.h

@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -22,7 +22,10 @@
 #define SOUTHBRIDGE_INTEL_I82801GX_CHIP_H
 
 struct southbridge_intel_i82801gx_config {
-	/* LPC configuration */
+	/**
+	 * Interrupt Routing configuration
+	 * If bit7 is 1, the interrupt is disabled.
+	 */
 	uint8_t pirqa_routing;
 	uint8_t pirqb_routing;
 	uint8_t pirqc_routing;
@@ -32,6 +35,32 @@ struct southbridge_intel_i82801gx_config {
 	uint8_t pirqg_routing;
 	uint8_t pirqh_routing;
 
+	/**
+	 * GPI Routing configuration
+	 *
+	 * Only the lower two bits have a meaning:
+	 * 00: No effect
+	 * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+	 * 10: SCI (if corresponding GPIO_EN bit is also set)
+	 * 11: reserved
+	 */
+	uint8_t gpi0_routing;
+	uint8_t gpi1_routing;
+	uint8_t gpi2_routing;
+	uint8_t gpi3_routing;
+	uint8_t gpi4_routing;
+	uint8_t gpi5_routing;
+	uint8_t gpi6_routing;
+	uint8_t gpi7_routing;
+	uint8_t gpi8_routing;
+	uint8_t gpi9_routing;
+	uint8_t gpi10_routing;
+	uint8_t gpi11_routing;
+	uint8_t gpi12_routing;
+	uint8_t gpi13_routing;
+	uint8_t gpi14_routing;
+	uint8_t gpi15_routing;
+
 	/* IDE configuration */
 	uint32_t ide_legacy_combined;
 	uint32_t ide_enable_primary;
@@ -39,7 +68,7 @@ struct southbridge_intel_i82801gx_config {
 	uint32_t sata_ahci;
 
 	/* Azalia Configuration */
-	unsigned long hda_viddid;
+	uint32_t hda_viddid;
 };
 
 extern struct chip_operations southbridge_intel_i82801gx_ops;

src/southbridge/intel/i82801gx/cmos_failover.c

@@ -1,10 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * This program is free software; you can redistribute it and/or modify
+ * (C) 2008-2009 coresystems GmbH
- * it under the terms of the GNU General Public License as published by
+ *
- * the Free Software Foundation; either version 2 of the License, or
+ * This program is free software; you can redistribute it and/or
- * (at your option) any later version.
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

src/southbridge/intel/i82801gx/i82801gx.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,6 +25,12 @@
 
 void i82801gx_enable(device_t dev)
 {
+	u32 reg32;
+
+	/* Enable SERR */
+	reg32 = pci_read_config32(dev, PCI_COMMAND);
+	reg32 |= PCI_COMMAND_SERR;
+	pci_write_config32(dev, PCI_COMMAND, reg32);
 }
 
 struct chip_operations southbridge_intel_i82801gx_ops = {

src/southbridge/intel/i82801gx/i82801gx.h

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

src/southbridge/intel/i82801gx/i82801gx_ac97.c

@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -119,7 +119,6 @@ static void program_sigid(struct device *dev, u32 id)
 
 static void ac97_audio_init(struct device *dev)
 {
-	u8 reg8;
 	u16 reg16;
 	u32 reg32;
 	int i;

src/southbridge/intel/i82801gx/i82801gx_azalia.c

@@ -31,61 +31,63 @@
 #define   HDA_ICII_BUSY (1 << 0)
 #define   HDA_ICII_VALID  (1 << 1)
 
+typedef struct southbridge_intel_i82801gx_config config_t;
+
 static int set_bits(u8 * port, u32 mask, u32 val)
 {
-	u32 dword;
+	u32 reg32;
 	int count;
 
+	/* Write (val & mask) to port */
 	val &= mask;
-	dword = readl(port);
+	reg32 = readl(port);
-	dword &= ~mask;
+	reg32 &= ~mask;
-	dword |= val;
+	reg32 |= val;
-	writel(dword, port);
+	writel(reg32, port);
 
+	/* Wait for readback of register to 
+	 * match what was just written to it 
+	 */
 	count = 50;
 	do {
-		dword = readl(port);
+		/* Wait 1ms based on BKDG wait time */
-		dword &= mask;
+		mdelay(1);
-		udelay(100);
+		reg32 = readl(port);
-	} while ((dword != val) && --count);
+		reg32 &= mask;
+	} while ((reg32 != val) && --count);
 
+	/* Timeout occured */
 	if (!count)
 		return -1;
-
-	udelay(540);
 	return 0;
 }
 
 static int codec_detect(u8 * base)
 {
-	u32 dword;
+	u32 reg32;
 
-	/* 1 */
+	/* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
-	set_bits(base + 0x08, 1, 1);
+	if (set_bits(base + 0x08, 1, 0) == -1) 
+		goto no_codec;
 
-	/* 2 */
+	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
-	dword = readl(base + 0x0e);
+	if (set_bits(base + 0x08, 1, 1) == -1) 
-	dword |= 7;
+		goto no_codec;
-	writel(dword, base + 0x0e);
 
-	/* 3 */
+	/* Read in Codec location (BAR + 0xe)[2..0]*/
+	reg32 = readl(base + 0xe);
+	reg32 &= 0x0f;
+	if (!reg32)
+		goto no_codec;
+		
+	return reg32;
+
+no_codec:
+	/* Codec Not found */
+	/* Put HDA back in reset (BAR + 0x8) [0] */
 	set_bits(base + 0x08, 1, 0);
-
+	printk_debug("Azalia: No codec!\n");
-	/* 4 */
+	return 0;
-	set_bits(base + 0x08, 1, 1);
-
-	/* 5 */
-	dword = readl(base + 0xe);
-	dword &= 7;
-
-	/* 6 */
-	if (!dword) {
-		set_bits(base + 0x08, 1, 0);
-		printk_debug("No codec!\n");
-		return 0;
-	}
-	return dword;
-
 }
 
 static u32 cim_verb_data[] = {
@@ -156,19 +158,24 @@ static u32 cim_verb_data[] = {
 	0x01F71F41,
 };
 
-static unsigned find_verb(u32 viddid, u32 ** verb)
+static unsigned find_verb(struct device *dev, u32 viddid, u32 ** verb)
 {
-	device_t azalia_dev = dev_find_slot(0, PCI_DEVFN(0x14, 2));
+	config_t *config = dev->chip_info;
-	struct southbridge_intel_i82801gx_config *cfg =
+	
-	    (struct southbridge_intel_i82801gx_config *)azalia_dev->chip_info;
+	if (config == NULL) {
-	printk_debug("Dev=%s\n", dev_path(azalia_dev));
+		printk_err("\ni82801gx_azalia: Not mentioned in mainboard's Config.lb!\n");
-	printk_debug("Default viddid=%x\n", cfg->hda_viddid);
-	printk_debug("Reading viddid=%x\n", viddid);
-	if (!cfg)
 		return 0;
-	if (viddid != cfg->hda_viddid)
+	}
+
+	printk_debug("Azalia: dev=%s\n", dev_path(dev));
+	printk_debug("Azalia: Default viddid=%x\n", (u32)config->hda_viddid);
+	printk_debug("Azalia: Reading viddid=%x\n", viddid);
+
+	if (viddid != config->hda_viddid)
 		return 0;
+
 	*verb = (u32 *) cim_verb_data;
+
 	return sizeof(cim_verb_data) / sizeof(u32);
 }
 
@@ -185,8 +192,8 @@ static int wait_for_ready(u8 *base)
 	int timeout = 50;
 
 	while(timeout--) {
-		u32 dword=readl(base +  HDA_ICII_REG);
+		u32 reg32 = readl(base +  HDA_ICII_REG);
-		if (!(dword & HDA_ICII_BUSY))
+		if (!(reg32 & HDA_ICII_BUSY))
 			return 0;
 		udelay(1);
 	}
@@ -207,8 +214,8 @@ static int wait_for_valid(u8 *base)
 
 	int timeout = 50;
 	while(timeout--) {
-		u32 dword = readl(base + HDA_ICII_REG);
+		u32 reg32 = readl(base + HDA_ICII_REG);
-		if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
+		if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) ==
 			HDA_ICII_VALID)
 			return 0;
 		udelay(1);
@@ -217,9 +224,9 @@ static int wait_for_valid(u8 *base)
 	return 1;
 }
 
-static void codec_init(u8 * base, int addr)
+static void codec_init(struct device *dev, u8 * base, int addr)
 {
-	u32 dword;
+	u32 reg32;
 	u32 *verb;
 	u32 verb_size;
 	int i;
@@ -228,24 +235,24 @@ static void codec_init(u8 * base, int addr)
 	if (wait_for_ready(base) == -1)
 		return;
 
-	dword = (addr << 28) | 0x000f0000;
+	reg32 = (addr << 28) | 0x000f0000;
-	writel(dword, base + 0x60);
+	writel(reg32, base + 0x60);
 
 	if (wait_for_valid(base) == -1)
 		return;
 
-	dword = readl(base + 0x64);
+	reg32 = readl(base + 0x64);
 
 	/* 2 */
-	printk_debug("codec viddid: %08x\n", dword);
+	printk_debug("Azalia: codec viddid: %08x\n", reg32);
-	verb_size = find_verb(dword, &verb);
+	verb_size = find_verb(dev, reg32, &verb);
 
 	if (!verb_size) {
-		printk_debug("No verb!\n");
+		printk_debug("Azalia: No verb!\n");
 		return;
 	}
 
-	printk_debug("verb_size: %d\n", verb_size);
+	printk_debug("Azalia: verb_size: %d\n", verb_size);
 	/* 3 */
 	for (i = 0; i < verb_size; i++) {
 		if (wait_for_ready(base) == -1)
@@ -256,15 +263,15 @@ static void codec_init(u8 * base, int addr)
 		if (wait_for_valid(base) == -1)
 			return;
 	}
-	printk_debug("verb loaded!\n");
+	printk_debug("Azalia: verb loaded.\n");
 }
 
-static void codecs_init(u8 * base, u32 codec_mask)
+static void codecs_init(struct device *dev, u8 * base, u32 codec_mask)
 {
 	int i;
 	for (i = 2; i >= 0; i--) {
 		if (codec_mask & (1 << i))
-			codec_init(base, i);
+			codec_init(dev, base, i);
 	}
 }
 
@@ -273,7 +280,71 @@ static void azalia_init(struct device *dev)
 	u8 *base;
 	struct resource *res;
 	u32 codec_mask;
+	u8 reg8;
+	u32 reg32;
 
+#if MMCONF_SUPPORT
+	// ESD
+	reg32 = pci_mmio_read_config32(dev, 0x134);
+	reg32 &= 0xff00ffff;
+	reg32 |= (2 << 16);
+	pci_mmio_write_config32(dev, 0x134, reg32);
+
+	// Link1 description
+	reg32 = pci_mmio_read_config32(dev, 0x140);
+	reg32 &= 0xff00ffff;
+	reg32 |= (2 << 16);
+	pci_mmio_write_config32(dev, 0x140, reg32);
+
+	// Port VC0 Resource Control Register
+	reg32 = pci_mmio_read_config32(dev, 0x114);
+	reg32 &= 0xffffff00;
+	reg32 |= 1;
+	pci_mmio_write_config32(dev, 0x114, reg32);
+
+	// VCi traffic class
+	reg8 = pci_mmio_read_config8(dev, 0x44);
+	reg8 |= (7 << 0); // TC7
+	pci_mmio_write_config8(dev, 0x44, reg8);
+
+	// VCi Resource Control
+	reg32 = pci_mmio_read_config32(dev, 0x120);
+	reg32 |= (1 << 31); 
+	reg32 |= (1 << 24); // VCi ID
+	reg32 |= (0x80 << 0); // VCi map
+	pci_mmio_write_config32(dev, 0x120, reg32);
+#else
+#error ICH7 Azalia required MMCONF_SUPPORT
+#endif
+
+	/* Set Bus Master */
+	reg32 = pci_read_config32(dev, PCI_COMMAND);
+	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+
+	pci_write_config8(dev, 0x3c, 0x0a); // unused?
+
+	// TODO Actually check if we're AC97 or HDA instead of hardcoding this
+	// here, in Config.lb and/or auto.c.
+	reg8 = pci_read_config8(dev, 0x40);
+	reg8 |= (1 << 3); // Clear Clock Detect Bit
+	pci_write_config8(dev, 0x40, reg8);
+	reg8 &= ~(1 << 3); // Keep CLKDETCLR from clearing the bit over and over
+	pci_write_config8(dev, 0x40, reg8);
+	reg8 |= (1 << 2); // Enable clock detection
+	pci_write_config8(dev, 0x40, reg8);
+	mdelay(1);
+	reg8 = pci_read_config8(dev, 0x40);
+	printk_debug("Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97");
+
+	//
+	reg8 = pci_read_config8(dev, 0x40); // Audio Control
+	reg8 |= 1; // Select Azalia mode. This needs to be controlled via Config.lb
+	pci_write_config8(dev, 0x40, reg8);
+
+	reg8 = pci_read_config8(dev, 0x4d); // Docking Status
+	reg8 &= ~(1 << 7); // Docking not supported
+	pci_write_config8(dev, 0x4d, reg8);
+#if 0
 	/* Set routing pin */
 	pci_write_config32(dev, 0xf8, 0x0);
 	pci_write_config8(dev, 0xfc, 0xAA);
@@ -283,21 +354,39 @@ static void azalia_init(struct device *dev)
 
 	/* Enable azalia, disable ac97 */
 	// pm_iowrite(0x59, 0xB);
+#endif
 
 	res = find_resource(dev, 0x10);
 	if (!res)
 		return;
 
+	// NOTE this will break as soon as the Azalia get's a bar above
+	// 4G. Is there anything we can do about it?
 	base = (u8 *) ((u32)res->base);
-	printk_debug("base = %08x\n", base);
+	printk_debug("Azalia: base = %08x\n", (u32)base);
 	codec_mask = codec_detect(base);
 
 	if (codec_mask) {
-		printk_debug("codec_mask = %02x\n", codec_mask);
+		printk_debug("Azalia: codec_mask = %02x\n", codec_mask);
-		codecs_init(base, codec_mask);
+		codecs_init(dev, base, codec_mask);
 	}
 }
 
+static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+	if (!vendor || !device) {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
+}
+
+static struct pci_operations azalia_pci_ops = {
+	.set_subsystem    = azalia_set_subsystem,
+};
+
 static struct device_operations azalia_ops = {
 	.read_resources		= pci_dev_read_resources,
 	.set_resources		= pci_dev_set_resources,
@@ -305,6 +394,7 @@ static struct device_operations azalia_ops = {
 	.init			= azalia_init,
 	.scan_bus		= 0,
 	.enable			= i82801gx_enable,
+	.ops_pci		= &azalia_pci_ops,
 };
 
 /* 82801GB/GR/GDH/GBM/GHM (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH) */

src/southbridge/intel/i82801gx/i82801gx_early_smbus.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -54,6 +54,6 @@ static void enable_smbus(void)
 
 static inline int smbus_read_byte(unsigned device, unsigned address)
 {
-	return do_smbus_read_byte(device, address);
+	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
 }
 

src/southbridge/intel/i82801gx/i82801gx_ide.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -30,12 +30,20 @@ static void ide_init(struct device *dev)
 {
 	u16 ideTimingConfig;
 	u32 reg32;
+	u32 enable_primary, enable_secondary;
 
 	/* Get the chip configuration */
 	config_t *config = dev->chip_info;
 
-	int enable_primary = config->ide_enable_primary;
+	printk_debug("i82801gx_ide: initializing... ");
-	int enable_secondary = config->ide_enable_secondary;
+	if (config == NULL) {
+		printk_err("\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n");
+		// Trying to set somewhat save defaults instead of bailing out.
+		enable_primary = enable_secondary = 1;
+	} else {
+		enable_primary = config->ide_enable_primary;
+		enable_secondary = config->ide_enable_secondary;
+	}
 
 	reg32 = pci_read_config32(dev, PCI_COMMAND);
 	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_IO | PCI_COMMAND_MASTER);
@@ -81,8 +89,25 @@ static void ide_init(struct device *dev)
 	/* Set Interrupt Line */
 	/* Interrupt Pin is set by D31IP.PIP */
 	pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */
+
+	printk_debug("\n");
 }
 
+static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+	if (!vendor || !device) {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
+}
+
+static struct pci_operations ide_pci_ops = {
+	.set_subsystem    = ide_set_subsystem,
+};
+
 static struct device_operations ide_ops = {
 	.read_resources		= pci_dev_read_resources,
 	.set_resources		= pci_dev_set_resources,
@@ -90,6 +115,7 @@ static struct device_operations ide_ops = {
 	.init			= ide_init,
 	.scan_bus		= 0,
 	.enable			= i82801gx_enable,
+	.ops_pci		= &ide_pci_ops,
 };
 
 /* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */

src/southbridge/intel/i82801gx/i82801gx_lpc.c

@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -151,6 +151,35 @@ static void i82801gx_pirq_init(device_t dev)
 	}
 }
 
+static void i82801gx_gpi_routing(device_t dev)
+{
+	/* Get the chip configuration */
+	config_t *config = dev->chip_info;
+	u32 reg32 = 0;
+
+	/* An array would be much nicer here, or some
+	 * other method of doing this.
+	 */
+	reg32 |= (config->gpi0_routing & 0x03) << 0;
+	reg32 |= (config->gpi1_routing & 0x03) << 2;
+	reg32 |= (config->gpi2_routing & 0x03) << 4;
+	reg32 |= (config->gpi3_routing & 0x03) << 6;
+	reg32 |= (config->gpi4_routing & 0x03) << 8;
+	reg32 |= (config->gpi5_routing & 0x03) << 10;
+	reg32 |= (config->gpi6_routing & 0x03) << 12;
+	reg32 |= (config->gpi7_routing & 0x03) << 14;
+	reg32 |= (config->gpi8_routing & 0x03) << 16;
+	reg32 |= (config->gpi9_routing & 0x03) << 18;
+	reg32 |= (config->gpi10_routing & 0x03) << 20;
+	reg32 |= (config->gpi11_routing & 0x03) << 22;
+	reg32 |= (config->gpi12_routing & 0x03) << 24;
+	reg32 |= (config->gpi13_routing & 0x03) << 26;
+	reg32 |= (config->gpi14_routing & 0x03) << 28;
+	reg32 |= (config->gpi15_routing & 0x03) << 30;
+
+	pci_write_config32(dev, 0xb8, reg32);
+}
+
 static void i82801gx_power_options(device_t dev)
 {
 	u8 reg8;
@@ -172,6 +201,7 @@ static void i82801gx_power_options(device_t dev)
 		reg8 |= 1;
 	}
 	reg8 |= (3 << 4);	/* avoid #S4 assertions */
+	reg8 &= ~(1 << 3);	/* minimum asssertion is 1 to 2 RTCCLK */
 
 	pci_write_config8(dev, GEN_PMCON_3, reg8);
 	printk_info("Set power %s after power failure.\n", pwr_on ? "on" : "off");
@@ -198,19 +228,34 @@ static void i82801gx_power_options(device_t dev)
 
 	// Enable CPU_SLP# and Intel Speedstep, set SMI# rate down
 	reg16 = pci_read_config16(dev, GEN_PMCON_1);
-	reg16 &= ~3;
+	reg16 &= ~((3 << 0) | (1 << 10));
-	reg16 |= (1 << 3) | (1 << 5) | (1 << 10);
+	reg16 |= (1 << 3) | (1 << 5);
+	reg16 |= (1 << 2); // CLKRUN_EN
 	pci_write_config16(dev, GEN_PMCON_1, reg16);
 
-	// Set GPIO13 to SCI (?)
+	// Set the board's GPI routing.
-	// This might be board specific
+	i82801gx_gpi_routing(dev);
-	pci_write_config32(dev, 0xb8, 0x08000000);
 }
 
-void i82801gx_rtc_init(struct device *dev)
+static void i82801gx_configure_cstates(device_t dev)
+{
+	u8 reg8;
+	
+	reg8 = pci_read_config8(dev, 0xa9); // Cx state configuration
+	reg8 |= (1 << 4) | (1 << 3) | (1 << 2);	// Enable Popup & Popdown
+	pci_write_config8(dev, 0xa9, reg8);
+
+	// Set Deeper Sleep configuration to recommended values
+	reg8 = pci_read_config8(dev, 0xaa);
+	reg8 &= 0xf0;
+	reg8 |= (2 << 2);	// Deeper Sleep to Stop CPU: 34-40us
+	reg8 |= (2 << 0);	// Deeper Sleep to Sleep: 15us
+	pci_write_config8(dev, 0xaa, reg8);
+}
+
+static void i82801gx_rtc_init(struct device *dev)
 {
 	u8 reg8;
-	u32 reg32;
 	int rtc_failed;
 
 	reg8 = pci_read_config8(dev, GEN_PMCON_3);
@@ -224,17 +269,40 @@ void i82801gx_rtc_init(struct device *dev)
 	rtc_init(rtc_failed);
 }
 
-static void enable_hpet(struct device *dev)
+static void enable_hpet(void)
 {
-	/* TODO */
+	u32 reg32;
+	
+	/* Leave HPET at default address, but enable it */
+	reg32 = RCBA32(0x3404);
+	reg32 |= (1 << 7); // HPET Address Enable
+	RCBA32(0x3404) = reg32;
 }
 
+static void enable_clock_gating(void)
+{
+	u32 reg32;
+	
+	/* Enable Clock Gating for most devices */
+	reg32 = RCBA32(0x341c);
+	reg32 |= (1 << 31);	// LPC clock gating
+	reg32 |= (1 << 30);	// PATA clock gating
+	// SATA clock gating
+	reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24);
+	reg32 |= (1 << 23);	// AC97 clock gating
+	reg32 |= (1 << 20) | (1 << 19);	// USB EHCI clock gating
+	reg32 |= (1 << 3) | (1 << 1);	// DMI clock gating
+	reg32 |= (1 << 2);	// PCIe clock gating;
+	RCBA32(0x341c) = reg32;
+}
 
 #if HAVE_SMI_HANDLER
 static void i82801gx_lock_smm(struct device *dev)
 {
 	void smm_lock(void);
+#if TEST_SMM_FLASH_LOCKDOWN
 	u8 reg8;
+#endif
 
 #if ENABLE_ACPI_MODE_IN_COREBOOT
 	printk_debug("Enabling ACPI via APMC:\n");
@@ -279,6 +347,22 @@ static void i82801gx_lock_smm(struct device *dev)
 }
 #endif
 
+#define SPIBASE 0x3020
+static void i82801gx_spi_init(void)
+{
+	u16 spicontrol;
+
+	spicontrol = RCBA16(SPIBASE + 2);
+	spicontrol &= ~(1 << 0); // SPI Access Request
+	RCBA16(SPIBASE + 2) = spicontrol;
+}
+
+static void i82801gx_fixups(void)
+{
+	/* This needs to happen after PCI enumeration */
+	RCBA32(0x1d40) |= 1;
+}
+
 static void lpc_init(struct device *dev)
 {
 	printk_debug("i82801gx: lpc_init\n");
@@ -297,6 +381,9 @@ static void lpc_init(struct device *dev)
 	/* Setup power options. */
 	i82801gx_power_options(dev);
 
+	/* Configure Cx state registers */
+	i82801gx_configure_cstates(dev);
+
 	/* Set the state of the GPIO lines. */
 	//gpio_init(dev);
 
@@ -307,13 +394,20 @@ static void lpc_init(struct device *dev)
 	isa_dma_init();
 
 	/* Initialize the High Precision Event Timers, if present. */
-	enable_hpet(dev);
+	enable_hpet();
+
+	/* Initialize Clock Gating */
+	enable_clock_gating();
 
 	setup_i8259();
 
 #if HAVE_SMI_HANDLER
 	i82801gx_lock_smm(dev);
 #endif
+
+	i82801gx_spi_init();
+
+	i82801gx_fixups();
 }
 
 static void i82801gx_lpc_read_resources(device_t dev)
@@ -341,9 +435,13 @@ static void i82801gx_lpc_enable_resources(device_t dev)
 
 static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
 {
-	printk_debug("Setting LPC bridge subsystem ID\n");
+	if (!vendor || !device) {
-	pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
-			pci_read_config32(dev, 0));
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
 }
 
 static struct pci_operations pci_ops = {

src/southbridge/intel/i82801gx/i82801gx_nic.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

src/southbridge/intel/i82801gx/i82801gx_pci.c

@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -26,31 +26,42 @@
 static void pci_init(struct device *dev)
 {
 	u16 reg16;
+	u8 reg8;
 
-#if 0
+	/* Enable Bus Master */
-	/* Commented out for now because it will break on some machines. */
+	reg16 = pci_read_config16(dev, PCI_COMMAND);
-	/* Set latency timer to 32. */
+	reg16 |= PCI_COMMAND_MASTER;
-	pci_write_config16(dev, 0x1b, 0x20);
+	pci_write_config16(dev, PCI_COMMAND, reg16);
-#endif
 
-	/* disable parity error response */
+	/* This device has no interrupt */
+	pci_write_config8(dev, 0x3c, 0xff);
+
+	/* disable parity error response and SERR */
 	reg16 = pci_read_config16(dev, 0x3e);
 	reg16 &= ~(1 << 0);
+	reg16 &= ~(1 << 1);
 	pci_write_config16(dev, 0x3e, reg16);
 
-	/* Clear errors in status registers */
+	/* Master Latency Count must be set to 0x04! */
-	reg16 = pci_read_config16(dev, 0x06);
+	reg8 = pci_read_config8(dev, 0x1b);
-	reg16 |= 0xf900;
+	reg8 &= 0x07;
-	pci_write_config16(dev, 0x06, reg16);
+	reg8 |= (0x04 << 3);
-
+	pci_write_config8(dev, 0x1b, reg8);
-	reg16 = pci_read_config16(dev, 0x1e);
-	reg16 |= 0xf900;
-	pci_write_config16(dev, 0x1e, reg16);
 
 	/* Will this improve throughput of bus masters? */
 	pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+
+	/* Clear errors in status registers */
+	reg16 = pci_read_config16(dev, 0x06);
+	//reg16 |= 0xf900;
+	pci_write_config16(dev, 0x06, reg16);
+
+	reg16 = pci_read_config16(dev, 0x1e);
+	// reg16 |= 0xf900;
+	pci_write_config16(dev, 0x1e, reg16);
 }
 
+#undef PCI_BRIDGE_UPDATE_COMMAND
 static void ich_pci_dev_enable_resources(struct device *dev)
 {
 	const struct pci_operations *ops;
@@ -68,15 +79,17 @@ static void ich_pci_dev_enable_resources(struct device *dev)
 			MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID);
 	}
 
-#if 0
+	command = pci_read_config16(dev, PCI_COMMAND);
+	command |= dev->command;
+#if PCI_BRIDGE_UPDATE_COMMAND
 	/* If we write to PCI_COMMAND, on some systems 
 	 * this will cause the ROM and APICs not being visible
 	 * anymore.
 	 */
-	command = pci_read_config16(dev, PCI_COMMAND);
-	command |= dev->command;
 	printk_debug("%s cmd <- %02x\n", dev_path(dev), command);
 	pci_write_config16(dev, PCI_COMMAND, command);
+#else
+	printk_debug("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command);
 #endif
 }
 
@@ -102,16 +115,14 @@ static void ich_pci_bus_enable_resources(struct device *dev)
 
 static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
 {
-#if 0
+	/* NOTE: This is not the default position! */
-	/* Currently disabled because it causes a "BAR 9" memory resource
+	if (!vendor || !device) {
-	 * conflict:
+		pci_write_config32(dev, 0x54,
-	 */
+				pci_read_config32(dev, PCI_VENDOR_ID));
-	u32 pci_id;
+	} else {
-
+		pci_write_config32(dev, 0x54,
-	printk_debug("Setting PCI bridge subsystem ID\n");
+				((device & 0xffff) << 16) | (vendor & 0xffff));
-	pci_id = pci_read_config32(dev, 0);
+	}
-	pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_id );
-#endif
 }
 
 static struct pci_operations pci_ops = {

src/southbridge/intel/i82801gx/i82801gx_pcie.c

@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -29,29 +29,53 @@ static void pci_init(struct device *dev)
 	u32 reg32;
 
 	printk_debug("Initializing ICH7 PCIe bridge.\n");
-#if 0
-	// When the latency of the PCIe(!) bridge is set to 0x20
-	// all devices on the secondary bus of the PCI(!) bridge
-	// suddenly vanish. If you know why, please explain here.
 	
-	/* Set latency timer to 32. */
+	/* Enable Bus Master */
-	pci_write_config16(dev, 0x1b, 0x20);
+	reg32 = pci_read_config32(dev, PCI_COMMAND);
-#endif
+	reg32 |= PCI_COMMAND_MASTER;
+	pci_write_config32(dev, PCI_COMMAND, reg32);
+
+	/* Set Cache Line Size to 0x10 */
+	// This has no effect but the OS might expect it
+	pci_write_config8(dev, 0x0c, 0x10);
 
-	/* disable parity error response */
 	reg16 = pci_read_config16(dev, 0x3e);
-	reg16 &= ~(1 << 0);
+	reg16 &= ~(1 << 0); /* disable parity error response */
+	// reg16 &= ~(1 << 1); /* disable SERR */
+	reg16 |= (1 << 2); /* ISA enable */
 	pci_write_config16(dev, 0x3e, reg16);
 
-	/* Clear errors in status registers */
+	/* Enable IO xAPIC on this PCIe port */
-	reg16 = pci_read_config16(dev, 0x06);
+	reg32 = pci_read_config32(dev, 0xd8);
-	reg16 |= 0xf900;
+	reg32 |= (1 << 7);
-	pci_write_config16(dev, 0x06, reg16);
+	pci_write_config32(dev, 0xd8, reg32);
 
-	reg16 = pci_read_config16(dev, 0x1e);
+	/* Enable Backbone Clock Gating */
-	reg16 |= 0xf900;
+	reg32 = pci_read_config32(dev, 0xe1);
-	pci_write_config16(dev, 0x1e, reg16);
+	reg32 |= (1 << 3) | (1 << 2) | (1 << 1) | (1 << 0);
+	pci_write_config32(dev, 0xe1, reg32);
 
+#if MMCONF_SUPPORT
+	/* Set VC0 transaction class */
+	reg32 = pci_mmio_read_config32(dev, 0x114);
+	reg32 &= 0xffffff00;
+	reg32 |= 1;
+	pci_mmio_write_config32(dev, 0x114, reg32);
+
+	/* Mask completion timeouts */
+	reg32 = pci_mmio_read_config32(dev, 0x148);
+	reg32 |= (1 << 14);
+	pci_mmio_write_config32(dev, 0x148, reg32);
+#else
+#error "MMIO needed for ICH7 PCIe"
+#endif
+	/* Enable common clock configuration */
+	// Are there cases when we don't want that?
+	reg16 = pci_read_config16(dev, 0x50);
+	reg16 |= (1 << 6);
+	pci_write_config16(dev, 0x50, reg16);
+
+#if EVEN_MORE_DEBUG
 	reg32 = pci_read_config32(dev, 0x20);
 	printk_spew("    MBL    = 0x%08x\n", reg32);
 	reg32 = pci_read_config32(dev, 0x24);
@@ -60,19 +84,32 @@ static void pci_init(struct device *dev)
 	printk_spew("    PMBU32 = 0x%08x\n", reg32);
 	reg32 = pci_read_config32(dev, 0x2c);
 	printk_spew("    PMLU32 = 0x%08x\n", reg32);
+#endif
+
+	/* Clear errors in status registers */
+	reg16 = pci_read_config16(dev, 0x06);
+	//reg16 |= 0xf900;
+	pci_write_config16(dev, 0x06, reg16);
+
+	reg16 = pci_read_config16(dev, 0x1e);
+	//reg16 |= 0xf900;
+	pci_write_config16(dev, 0x1e, reg16);
 }
 
-static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
+static void pcie_set_subsystem(device_t dev, unsigned vendor, unsigned device)
 {
-	u32 pci_id;
+	/* NOTE: This is not the default position! */
-
+	if (!vendor || !device) {
-	printk_debug("Setting PCIe bridge subsystem ID.\n");
+		pci_write_config32(dev, 0x94,
-	pci_id = pci_read_config32(dev, 0);
+				pci_read_config32(dev, 0));
-	pci_write_config32(dev, 0x94, pci_id );
+	} else {
+		pci_write_config32(dev, 0x94,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
 }
 
 static struct pci_operations pci_ops = {
-	.set_subsystem = set_subsystem,
+	.set_subsystem = pcie_set_subsystem,
 };
 
 static struct device_operations device_ops = {

src/southbridge/intel/i82801gx/i82801gx_reset.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

src/southbridge/intel/i82801gx/i82801gx_sata.c

@@ -3,10 +3,10 @@
  *
  * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -29,16 +29,29 @@ typedef struct southbridge_intel_i82801gx_config config_t;
 static void sata_init(struct device *dev)
 {
 	u32 reg32;
+	u16 reg16;
 	/* Get the chip configuration */
 	config_t *config = dev->chip_info;
 
 	printk_debug("i82801gx_sata: initializing...\n");
+
+	if (config == NULL)
+		printk_err("i82801gx_sata: error: device not in Config.lb!\n");
+
 	/* SATA configuration */
 
 	/* Enable BARs */
-	pci_write_config16(dev, 0x04, 0x0007);
+	pci_write_config16(dev, PCI_COMMAND, 0x0007);
 
 	if (config->ide_legacy_combined) {
+		printk_debug("SATA controller in combined mode.\n");
+		/* No AHCI: clear AHCI base */
+		pci_write_config32(dev, 0x24, 0x00000000);
+		/* And without AHCI BAR no memory decoding */
+		reg16 = pci_read_config16(dev, PCI_COMMAND);
+		reg16 &= ~PCI_COMMAND_MEMORY;
+		pci_write_config16(dev, PCI_COMMAND, reg16);
+
 		pci_write_config8(dev, 0x09, 0x80);
 
 		/* Set timings */
@@ -49,6 +62,10 @@ static void sata_init(struct device *dev)
 		pci_write_config16(dev, 0x48, 0x0004);
 		pci_write_config16(dev, 0x4a, 0x0200);
 
+		/* Set IDE I/O Configuration */
+		reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
+		pci_write_config32(dev, IDE_CONFIG, reg32);
+
 		/* Combine IDE - SATA configuration */
 		pci_write_config8(dev, 0x90, 0x02);
 
@@ -56,8 +73,9 @@ static void sata_init(struct device *dev)
 		pci_write_config8(dev, 0x92, 0x0f);
 
 		/* SATA Initialization register */
-		pci_write_config32(dev, 0x94, 0x40000180);
+		pci_write_config32(dev, 0x94, 0x5a000180);
 	} else if(config->sata_ahci) {
+		printk_debug("SATA controller in AHCI mode.\n");
 		/* Allow both Legacy and Native mode */
 		pci_write_config8(dev, 0x09, 0x8f);
 
@@ -86,6 +104,18 @@ static void sata_init(struct device *dev)
 		/* SATA Initialization register */
 		pci_write_config32(dev, 0x94, 0x1a000180);
 	} else {
+		printk_debug("SATA controller in plain mode.\n");
+		/* Set Sata Controller Mode. No Mapping(?) */
+		pci_write_config8(dev, 0x90, 0x00);
+
+		/* No AHCI: clear AHCI base */
+		pci_write_config32(dev, 0x24, 0x00000000);
+
+		/* And without AHCI BAR no memory decoding */
+		reg16 = pci_read_config16(dev, PCI_COMMAND);
+		reg16 &= ~PCI_COMMAND_MEMORY;
+		pci_write_config16(dev, PCI_COMMAND, reg16);
+
 		/* Native mode capable on both primary and secondary (0xa)
 		 * or'ed with enabled (0x50) = 0xf
 		 */
@@ -107,9 +137,6 @@ static void sata_init(struct device *dev)
 		reg32 = SIG_MODE_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
 		pci_write_config32(dev, IDE_CONFIG, reg32);
 	
-		/* Set Sata Controller Mode. */
-		pci_write_config8(dev, 0x90, 0x02);
-	
 		/* Port 0 & 1 enable XXX */
 		pci_write_config8(dev, 0x92, 0x15);
 	
@@ -135,8 +162,28 @@ static void sata_init(struct device *dev)
 	pci_write_config8(dev, 0xa0, 0x00);
 
 	pci_write_config8(dev, PCI_INTERRUPT_LINE, 0);
+
+	/* Sata Initialization Register */
+	reg32 = pci_read_config32(dev, 0x94);
+	reg32 |= (1 << 30); // due to some bug
+	pci_write_config32(dev, 0x94, reg32);
 }
 
+static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+	if (!vendor || !device) {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
+}
+
+static struct pci_operations sata_pci_ops = {
+	.set_subsystem    = sata_set_subsystem,
+};
+
 static struct device_operations sata_ops = {
 	.read_resources		= pci_dev_read_resources,
 	.set_resources		= pci_dev_set_resources,
@@ -144,6 +191,7 @@ static struct device_operations sata_ops = {
 	.init			= sata_init,
 	.scan_bus		= 0,
 	.enable			= i82801gx_enable,
+	.ops_pci		= &sata_pci_ops,
 };
 
 /* Desktop Non-AHCI and Non-RAID Mode */
@@ -154,6 +202,15 @@ static const struct pci_driver i82801gx_sata_normal_driver __pci_driver = {
 	.device	= 0x27c0,
 };
 
+/* Mobile Non-AHCI and Non-RAID Mode */
+/* 82801GBM/GHM (ICH7-M/ICH7-M DH) */
+static const struct pci_driver i82801gx_sata_mobile_normal_driver __pci_driver = {
+	.ops	= &sata_ops,
+	.vendor	= PCI_VENDOR_ID_INTEL,
+	.device	= 0x27c4,
+};
+
+
 /* NOTE: Any of the below are not properly supported yet. */
 
 /* Desktop AHCI Mode */
@@ -172,14 +229,6 @@ static const struct pci_driver i82801gx_sata_raid_driver __pci_driver = {
 	.device	= 0x27c3,
 };
 
-/* Mobile Non-AHCI and Non-RAID Mode */
-/* 82801GBM/GHM (ICH7-M/ICH7-M DH) */
-static const struct pci_driver i82801gx_sata_mobile_normal_driver __pci_driver = {
-	.ops	= &sata_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
-	.device	= 0x27c4,
-};
-
 /* Mobile AHCI Mode */
 /* 82801GBM/GHM (ICH7-M/ICH7-M DH) */
 static const struct pci_driver i82801gx_sata_mobile_ahci_driver __pci_driver = {

src/southbridge/intel/i82801gx/i82801gx_smbus.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,27 +18,47 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-#include <stdint.h>
+#include <console/console.h>
-#include <smbus.h>
+#include <device/device.h>
-#include <pci.h>
+#include <device/path.h>
-#include <pci_ids.h>
+#include <device/smbus.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
 #include <arch/io.h>
 #include "i82801gx.h"
-#include "i82801_smbus.h"
+#include "i82801gx_smbus.h"
  
-static int smbus_read_byte(struct bus *bus, device_t dev, u8 address)
+static int lsmbus_read_byte(device_t dev, u8 address)
 {
 	u16 device;
 	struct resource *res;
+	struct bus *pbus;
 
 	device = dev->path.i2c.device;
-	res = find_resource(bus->dev, 0x20);
+	pbus = get_pbus_smbus(dev);
+	res = find_resource(pbus->dev, 0x20);
 
 	return do_smbus_read_byte(res->base, device, address);
 }
 
 static struct smbus_bus_operations lops_smbus_bus = {
-	.read_byte	= smbus_read_byte,
+	.read_byte	= lsmbus_read_byte,
+};
+
+static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+	if (!vendor || !device) {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
+}
+
+static struct pci_operations smbus_pci_ops = {
+	.set_subsystem    = smbus_set_subsystem,
 };
 
 static struct device_operations smbus_ops = {
@@ -49,6 +69,7 @@ static struct device_operations smbus_ops = {
 	.scan_bus		= scan_static_bus,
 	.enable			= i82801gx_enable,
 	.ops_smbus_bus		= &lops_smbus_bus,
+	.ops_pci		= &smbus_pci_ops,
 };
 
 /* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */

src/southbridge/intel/i82801gx/i82801gx_smbus.h

@@ -2,11 +2,12 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
+ * Copyright (C) 2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,7 +26,7 @@ static void smbus_delay(void)
 	inb(0x80);
 }
 
-static int smbus_wait_until_ready(void)
+static int smbus_wait_until_ready(u16 smbus_base)
 {
 	unsigned loops = SMBUS_TIMEOUT;
 	unsigned char byte;
@@ -33,12 +34,12 @@ static int smbus_wait_until_ready(void)
 		smbus_delay();
 		if (--loops == 0)
 			break;
-		byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+		byte = inb(smbus_base + SMBHSTSTAT);
 	} while (byte & 1);
 	return loops ? 0 : -1;
 }
 
-static int smbus_wait_until_done(void)
+static int smbus_wait_until_done(u16 smbus_base)
 {
 	unsigned loops = SMBUS_TIMEOUT;
 	unsigned char byte;
@@ -46,142 +47,54 @@ static int smbus_wait_until_done(void)
 		smbus_delay();
 		if (--loops == 0)
 			break;
-		byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+		byte = inb(smbus_base + SMBHSTSTAT);
 	} while ((byte & 1) || (byte & ~((1 << 6) | (1 << 0))) == 0);
 	return loops ? 0 : -1;
 }
 
-static int smbus_wait_until_blk_done(void)
+static int do_smbus_read_byte(unsigned smbus_base, unsigned device, unsigned address)
-{
-	unsigned loops = SMBUS_TIMEOUT;
-	unsigned char byte;
-	do {
-		smbus_delay();
-		if (--loops == 0)
-			break;
-		byte = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-	} while ((byte & (1 << 7)) == 0);
-	return loops ? 0 : -1;
-}
-
-static int do_smbus_read_byte(unsigned device, unsigned address)
 {
 	unsigned char global_status_register;
 	unsigned char byte;
 
-	if (smbus_wait_until_ready() < 0) {
+	if (smbus_wait_until_ready(smbus_base) < 0) {
 		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
 	}
 	/* Setup transaction */
 	/* Disable interrupts */
-	outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
+	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
 	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBXMITADD);
+	outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
 	/* Set the command/address... */
-	outb(address & 0xff, SMBUS_IO_BASE + SMBHSTCMD);
+	outb(address & 0xff, smbus_base + SMBHSTCMD);
 	/* Set up for a byte data read */
-	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x2 << 2),
+	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
-	     (SMBUS_IO_BASE + SMBHSTCTL));
+	     (smbus_base + SMBHSTCTL));
 	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
 
 	/* Clear the data byte... */
-	outb(0, SMBUS_IO_BASE + SMBHSTDAT0);
+	outb(0, smbus_base + SMBHSTDAT0);
 
 	/* Start the command */
-	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) | 0x40),
+	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     SMBUS_IO_BASE + SMBHSTCTL);
+	     smbus_base + SMBHSTCTL);
 
 	/* Poll for transaction completion */
-	if (smbus_wait_until_done() < 0) {
+	if (smbus_wait_until_done(smbus_base) < 0) {
 		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
 	}
 
-	global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT);
+	global_status_register = inb(smbus_base + SMBHSTSTAT);
 
 	/* Ignore the "In Use" status... */
 	global_status_register &= ~(3 << 5);
 
 	/* Read results of transaction */
-	byte = inb(SMBUS_IO_BASE + SMBHSTDAT0);
+	byte = inb(smbus_base + SMBHSTDAT0);
 	if (global_status_register != (1 << 1)) {
 		return SMBUS_ERROR;
 	}
 	return byte;
 }
 
-/* This function is neither used nor tested by me (Corey Osgood), the author 
-(Yinghai) probably tested/used it on i82801er */
-static int do_smbus_write_block(unsigned device, unsigned length, unsigned cmd,
-				unsigned data1, unsigned data2)
-{
-	unsigned char byte;
-	unsigned char stat;
-	int i;
-
-#if CONFIG_USE_PRINTK_IN_CAR
-	printk_err("Untested smbus_write_block called\r\n");
-#else
-	print_err("Untested smbus_write_block called\r\n");
-#endif
-
-	/* Clear the PM timeout flags, SECOND_TO_STS */
-	outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
-
-	if (smbus_wait_until_ready() < 0) {
-		return -2;
-	}
-
-	/* Setup transaction */
-	/* Obtain ownership */
-	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
-	for (stat = 0; (stat & 0x40) == 0;) {
-		stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-	}
-	/* Clear the done bit */
-	outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
-	/* Disable interrupts */
-	outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
-
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
-
-	/* Set the command address */
-	outb(cmd & 0xff, SMBUS_IO_BASE + SMBHSTCMD);
-
-	/* Set the block length */
-	outb(length & 0xff, SMBUS_IO_BASE + SMBHSTDAT0);
-
-	/* Try sending out the first byte of data here */
-	byte = (data1 >> (0)) & 0x0ff;
-	outb(byte, SMBUS_IO_BASE + SMBBLKDAT);
-	/* Issue a block write command */
-	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xe3) | (0x5 << 2) | 0x40,
-	     SMBUS_IO_BASE + SMBHSTCTL);
-
-	for (i = 0; i < length; i++) {
-
-		/* Poll for transaction completion */
-		if (smbus_wait_until_blk_done() < 0) {
-			return -3;
-		}
-
-		/* Load the next byte */
-		if (i > 3)
-			byte = (data2 >> (i % 4)) & 0x0ff;
-		else
-			byte = (data1 >> (i)) & 0x0ff;
-		outb(byte, SMBUS_IO_BASE + SMBBLKDAT);
-
-		/* Clear the done bit */
-		outb(inb(SMBUS_IO_BASE + SMBHSTSTAT),
-		     SMBUS_IO_BASE + SMBHSTSTAT);
-	}
-
-#if CONFIG_USE_PRINTK_IN_CAR
-	printk_debug("SMBUS Block complete\r\n");
-#else
-	print_debug("SMBUS Block complete\r\n");
-#endif
-	return 0;
-}

src/southbridge/intel/i82801gx/i82801gx_usb.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -42,6 +42,21 @@ static void usb_init(struct device *dev)
 	printk_debug("done.\n");
 }
 
+static void usb_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+	if (!vendor || !device) {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
+}
+
+static struct pci_operations usb_pci_ops = {
+	.set_subsystem    = usb_set_subsystem,
+};
+
 static struct device_operations usb_ops = {
 	.read_resources		= pci_dev_read_resources,
 	.set_resources		= pci_dev_set_resources,
@@ -49,6 +64,7 @@ static struct device_operations usb_ops = {
 	.init			= usb_init,
 	.scan_bus		= 0,
 	.enable			= i82801gx_enable,
+	.ops_pci		= &usb_pci_ops,
 };
 
 /* 82801GB/GR/GDH/GBM/GHM/GU (ICH7/ICH7R/ICH7DH/ICH7-M/ICH7-M DH/ICH7-U) */

src/southbridge/intel/i82801gx/i82801gx_usb_debug.c

@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+// An arbitrary address for the BAR
+#define EHCI_BAR		0xFEF00000
+// These could be read from DEBUG_BASE (0:1d.7 R 0x5A 16bit)
+#define EHCI_BAR_INDEX		0x10
+#define EHCI_DEBUG_OFFSET	0xA0
+
+static void set_debug_port(unsigned port)
+{
+	// Nothing for now?
+}
+
+static void i82801gx_enable_usbdebug_direct(unsigned port)
+{
+	pci_write_config32(PCI_DEV(0, 0x1d, 7), EHCI_BAR_INDEX, EHCI_BAR);
+	pci_write_config8(PCI_DEV(0, 0x1d, 7), 0x04, 0x2); // Memory Space Enable
+}
+

src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,14 +23,23 @@
 #include <device/pci.h>
 #include <device/pci_ids.h>
 #include "i82801gx.h"
+#if CONFIG_USBDEBUG_DIRECT
+#include <usbdebug_direct.h>
+#endif
+#include <arch/io.h>
 
 static void usb_ehci_init(struct device *dev)
 {
+	struct resource *res;
+	u8 *base;
 	u32 reg32;
+	u8 reg8;
 
 	printk_debug("EHCI: Setting up controller.. ");
 	reg32 = pci_read_config32(dev, PCI_COMMAND);
-	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER);
+	reg32 |= PCI_COMMAND_MASTER;
+	reg32 |= PCI_COMMAND_SERR;
+	pci_write_config32(dev, PCI_COMMAND, reg32);
 
 	reg32 = pci_read_config32(dev, 0xdc);
 	reg32 |= (1 << 31) | (1 << 27);
@@ -41,11 +50,21 @@ static void usb_ehci_init(struct device *dev)
 	reg32 |= (2 << 2) | (1 << 29) | (1 << 17);
 	pci_write_config32(dev, 0xfc, reg32);
 
+	/* Clear any pending port changes */
+	res = find_resource(dev, 0x10);
+	base =(u8 *)res->base;
+	reg32 = readl(base + 0x24) | (1 << 2);
+	writel(base + 0x24, reg32);
+
+	/* workaround */
+	reg8 = pci_read_config8(dev, 0x84);
+	reg8 |= (1 << 4);
+	pci_write_config8(dev, 0x84, reg8);
+
 	printk_debug("done.\n");
 }
 
-static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
+static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
-				   unsigned device)
 {
 	u8 access_cntl;
 
@@ -54,14 +73,42 @@ static void usb_ehci_set_subsystem(device_t dev, unsigned vendor,
 	/* Enable writes to protected registers. */
 	pci_write_config8(dev, 0x80, access_cntl | 1);
 
-	/* Write the subsystem vendor and device ID. */
+	if (!vendor || !device) {
-	pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
-			   ((device & 0xffff) << 16) | (vendor & 0xffff));
+				pci_read_config32(dev, PCI_VENDOR_ID));
+	} else {
+		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+				((device & 0xffff) << 16) | (vendor & 0xffff));
+	}
 
 	/* Restore protection. */
 	pci_write_config8(dev, 0x80, access_cntl);
 }
 
+static void usb_ehci_set_resources(struct device *dev)
+{
+#if CONFIG_USBDEBUG_DIRECT
+	struct resource *res;
+	u32 base;
+	u32 usb_debug;
+
+	usb_debug = get_ehci_debug();
+	set_ehci_debug(0);
+#endif
+	pci_dev_set_resources(dev);
+
+#if CONFIG_USBDEBUG_DIRECT
+	res = find_resource(dev, 0x10);
+	set_ehci_debug(usb_debug);
+	if (!res) return;
+	base = res->base;
+	set_ehci_base(base);
+	report_resource_stored(dev, res, "");
+#endif
+}
+
+
+
 static struct pci_operations lops_pci = {
 	.set_subsystem	= &usb_ehci_set_subsystem,
 };

src/southbridge/intel/i82801gx/i82801gx_watchdog.c

@@ -1,12 +1,12 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2008 coresystems GmbH
+ * Copyright (C) 2008-2009 coresystems GmbH
  *
- * This program is free software; you can redistribute it and/or modify
+ * This program is free software; you can redistribute it and/or
- * it under the terms of the GNU General Public License as published by
+ * modify it under the terms of the GNU General Public License as
- * the Free Software Foundation; either version 2 of the License, or
+ * published by the Free Software Foundation; version 2 of
- * (at your option) any later version.
+ * the License.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of