sb/intel/i82801jx: Move early sb init to a common place

Setting southbridge GPIO is now done after console init,
which should be fine. This code is partially copied from
i82801ix.

Change-Id: I51dd30de4a82898b0f1d8c4308e8de4a00d1b7aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36756
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/asus/p5qc/romstage.c

@@ -17,7 +17,6 @@
 #include <device/pci_ops.h>
 #include <console/console.h>
 #include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/gpio.h>
 #include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
 #include <arch/romstage.h>
@@ -31,20 +30,8 @@
  * We should use standard gpio.h eventually
  */
 
-static void mb_gpio_init(void)
+static void mb_misc_rcba(void)
 {
-	/* Set the value for GPIO base address register and enable GPIO. */
-	pci_write_config32(LPC_DEV, D31F0_GPIO_BASE, (DEFAULT_GPIOBASE | 1));
-	pci_write_config8(LPC_DEV,  D31F0_GPIO_CNTL, 0x10);
-
-	setup_pch_gpios(&mainboard_gpio_map);
-
-	/* Set default GPIOs on superio: TODO (here or in ramstage) */
-
-	/* Enable IOAPIC */
-	RCBA8(0x31ff) = 0x03;
-	RCBA8(0x31ff);
-
 	/* TODO? */
 	RCBA32(RCBA_CG) = 0xbf7f001f;
 	RCBA32(0x3430) = 0x00000002;
@@ -59,13 +46,14 @@ void mainboard_romstage_entry(void)
 
 	/* Set southbridge and Super I/O GPIOs. */
 	i82801jx_lpc_setup();
-	mb_gpio_init();
+	mb_misc_rcba();
 	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 
 	console_init();
 
 	enable_smbus();
 
+	i82801jx_early_init();
 	x4x_early_init();
 
 	s3_resume = southbridge_detect_s3_resume();

src/mainboard/asus/p5ql-em/romstage.c

@@ -16,7 +16,6 @@
 #include <device/pnp_ops.h>
 #include <console/console.h>
 #include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/gpio.h>
 #include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
 #include <cpu/x86/msr.h>
@@ -104,19 +103,6 @@ static int setup_sio_gpio(void)
 	return need_reset;
 }
 
-static void mb_gpio_init(void)
-{
-	/* Set the value for GPIO base address register and enable GPIO. */
-	pci_write_config32(LPC_DEV, D31F0_GPIO_BASE, (DEFAULT_GPIOBASE | 1));
-	pci_write_config8(LPC_DEV,  D31F0_GPIO_CNTL, 0x10);
-
-	setup_pch_gpios(&mainboard_gpio_map);
-
-	/* Enable IOAPIC */
-	RCBA8(0x31ff) = 0x03;
-	RCBA8(0x31ff);
-}
-
 void mainboard_romstage_entry(void)
 {
 	/* This board has first dimm slot of each channel hooked up to
@@ -129,13 +115,13 @@ void mainboard_romstage_entry(void)
 
 	/* Set southbridge and Super I/O GPIOs. */
 	i82801jx_lpc_setup();
-	mb_gpio_init();
 	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 
 	console_init();
 
 	enable_smbus();
 
+	i82801jx_early_init();
 	x4x_early_init();
 
 	s3_resume = southbridge_detect_s3_resume();

src/mainboard/intel/dg43gt/romstage.c

@@ -17,7 +17,6 @@
 #include <device/pci_ops.h>
 #include <console/console.h>
 #include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/gpio.h>
 #include <southbridge/intel/common/pmclib.h>
 #include <northbridge/intel/x4x/x4x.h>
 #include <arch/romstage.h>
@@ -31,20 +30,8 @@
  * We should use standard gpio.h eventually
  */
 
-static void mb_gpio_init(void)
+static void mb_misc_rcba(void)
 {
-	/* Set the value for GPIO base address register and enable GPIO. */
-	pci_write_config32(LPC_DEV, D31F0_GPIO_BASE, (DEFAULT_GPIOBASE | 1));
-	pci_write_config8(LPC_DEV,  D31F0_GPIO_CNTL, 0x10);
-
-	setup_pch_gpios(&mainboard_gpio_map);
-
-	/* Set default GPIOs on superio: TODO (here or in ramstage) */
-
-	/* Enable IOAPIC */
-	RCBA8(0x31ff) = 0x03;
-	RCBA8(0x31ff);
-
 	RCBA32(0x3410) = 0x00060464;
 	RCBA32(RCBA_BUC) &= ~BUC_LAND;
 	RCBA32(0x3418) = 0x01320001;
@@ -61,13 +48,14 @@ void mainboard_romstage_entry(void)
 
 	/* Set southbridge and Super I/O GPIOs. */
 	i82801jx_lpc_setup();
-	mb_gpio_init();
+	mb_misc_rcba();
 	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 
 	console_init();
 
 	enable_smbus();
 
+	i82801jx_early_init();
 	x4x_early_init();
 
 	s3_resume = southbridge_detect_s3_resume();

src/northbridge/intel/x4x/early_init.c

@@ -42,8 +42,10 @@ void x4x_early_init(void)
 	pci_write_config32(d0f0, D0F0_EPBAR_LO, DEFAULT_EPBAR | 1);
 
 	/* Setup PMBASE */
-	pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1);
+	if (!CONFIG(SOUTHBRIDGE_INTEL_I82801JX)) {
-	pci_write_config8(PCI_DEV(0, 0x1f, 0), ACPI_CNTL, 0x80);
+		pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1);
+		pci_write_config8(PCI_DEV(0, 0x1f, 0), ACPI_CNTL, 0x80);
+	}
 
 	/* Setup HECIBAR */
 	pci_write_config32(PCI_DEV(0, 3, 0), 0x10, DEFAULT_HECIBAR);
@@ -57,12 +59,14 @@ void x4x_early_init(void)
 	pci_write_config8(d0f0, D0F0_PAM(5), 0x33);
 	pci_write_config8(d0f0, D0F0_PAM(6), 0x33);
 
-	printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
+	if (!CONFIG(SOUTHBRIDGE_INTEL_I82801JX)) {
-	RCBA32(GCS) = RCBA32(GCS) | (1 << 5);	/* No reset */
+		printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
-	outw(1 << 11, DEFAULT_PMBASE + 0x60 + 0x08);	/* halt timer */
+		RCBA32(GCS) = RCBA32(GCS) | (1 << 5);	/* No reset */
-	outw(1 <<  3, DEFAULT_PMBASE + 0x60 + 0x04);	/* clear timeout */
+		outw(1 << 11, DEFAULT_PMBASE + 0x60 + 0x08);	/* halt timer */
-	outw(1 <<  1, DEFAULT_PMBASE + 0x60 + 0x06);	/* clear 2nd timeout */
+		outw(1 <<  3, DEFAULT_PMBASE + 0x60 + 0x04);	/* clear timeout */
-	printk(BIOS_DEBUG, " done.\n");
+		outw(1 <<  1, DEFAULT_PMBASE + 0x60 + 0x06);	/* clear 2nd timeout */
+		printk(BIOS_DEBUG, " done.\n");
+	}
 
 	if (!(pci_read_config32(d0f0, D0F0_CAPID0 + 4) & (1 << (46 - 32)))) {
 		/* Enable internal GFX */

src/southbridge/intel/i82801jx/early_init.c

@@ -12,7 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <console/console.h>
 #include <device/pci_ops.h>
+#include <southbridge/intel/common/gpio.h>
+#include <southbridge/intel/common/pmbase.h>
 #include "i82801jx.h"
 #include "chip.h"
 
@@ -52,3 +55,61 @@ void i82801jx_lpc_setup(void)
 	pci_write_config32(d31f0, D31F0_GEN3_DEC, config->gen3_dec);
 	pci_write_config32(d31f0, D31F0_GEN4_DEC, config->gen4_dec);
 }
+
+static void i82801jx_setup_bars(void)
+{
+	const pci_devfn_t d31f0 = PCI_DEV(0, 0x1f, 0);
+
+	/* Set up RCBA. */
+	pci_write_config32(d31f0, RCBA, (uintptr_t)DEFAULT_RCBA | 1);
+
+	/* Set up PMBASE. */
+	pci_write_config32(d31f0, D31F0_PMBASE, DEFAULT_PMBASE | 1);
+	/* Enable PMBASE. */
+	pci_write_config8(d31f0, D31F0_ACPI_CNTL, 0x80);
+
+	/* Set up GPIOBASE. */
+	pci_write_config32(d31f0, D31F0_GPIO_BASE, DEFAULT_GPIOBASE);
+		/* Enable GPIO. */
+	pci_write_config8(d31f0, D31F0_GPIO_CNTL,
+			  pci_read_config8(d31f0, D31F0_GPIO_CNTL) | 0x10);
+}
+
+#define TCO_BASE 0x60
+
+void i82801jx_early_init(void)
+{
+	const pci_devfn_t d31f0 = PCI_DEV(0, 0x1f, 0);
+
+	printk(BIOS_DEBUG, "Setting up static southbridge registers...");
+	i82801jx_setup_bars();
+	printk(BIOS_DEBUG, " done.\n");
+
+	setup_pch_gpios(&mainboard_gpio_map);
+
+	printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
+	RCBA32(GCS) = RCBA32(GCS) | (1 << 5);	/* No reset */
+	write_pmbase16(TCO_BASE + 0x8, (1 << 11));	/* halt timer */
+	write_pmbase16(TCO_BASE + 0x4, (1 << 3));	/* clear timeout */
+	write_pmbase16(TCO_BASE + 0x6, (1 << 1));	/* clear 2nd timeout */
+	printk(BIOS_DEBUG, " done.\n");
+
+	/* Enable IOAPIC */
+	RCBA8(OIC) = 0x3;
+	RCBA8(OIC);
+
+	/* Initialize power management initialization
+	   register early as it affects reboot behavior. */
+	/* Bit 20 activates global reset of host and ME on cf9 writes of 0x6
+	   and 0xe (required if ME is disabled but present), bit 31 locks it.
+	   The other bits are 'must write'. */
+	u8 reg8 = pci_read_config8(d31f0, 0xac);
+	reg8 |= (1 << 31) | (1 << 30) | (1 << 20) | (3 << 8);
+	pci_write_config8(d31f0, 0xac, reg8);
+
+	/* TODO: If RTC power failed, reset RTC state machine
+		(set, then reset RTC 0x0b bit7) */
+
+	/* TODO: Check power state bits in GEN_PMCON_2 (D31F0 0xa2)
+		before they get cleared. */
+}

src/southbridge/intel/i82801jx/i82801jx.h

@@ -235,6 +235,7 @@ int smbus_block_write(unsigned int device, unsigned int cmd, u8 bytes,
 		const u8 *buf);
 #endif
 void i82801jx_lpc_setup(void);
+void i82801jx_early_init(void);
 
 #endif