Here is an updated patch addressing most of Uwe's and Peter's
comments. Ripping out the ehci/uhci_init() code doesn't seem to have
done any harm, and I got rid of a bunch of unused junk in
i3100_smbus.h
I left the *_set_subsystem() arguments unsigned, as that's how the
function is declared in include/device/pci.h.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3157 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ed Swierk
Stefan Reinauer
parent
62eee3ff4f
commit
aaea11b749
|
|
@ -0,0 +1,28 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2008 Arastra, Inc.
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License version 2 as
|
||||||
|
## published by the Free Software Foundation.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
## You should have received a copy of the GNU General Public License
|
||||||
|
## along with this program; if not, write to the Free Software
|
||||||
|
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
##
|
||||||
|
|
||||||
|
config chip.h
|
||||||
|
driver i3100.o
|
||||||
|
driver i3100_uhci.o
|
||||||
|
driver i3100_lpc.o
|
||||||
|
driver i3100_sata.o
|
||||||
|
driver i3100_ehci.o
|
||||||
|
driver i3100_smbus.o
|
||||||
|
driver i3100_pci.o
|
||||||
|
object i3100_reset.o
|
||||||
|
|
@ -0,0 +1,49 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
struct southbridge_intel_i3100_config
|
||||||
|
{
|
||||||
|
#define I3100_GPIO_USE_MASK 0x03
|
||||||
|
#define I3100_GPIO_USE_DEFAULT 0x00
|
||||||
|
#define I3100_GPIO_USE_AS_NATIVE 0x01
|
||||||
|
#define I3100_GPIO_USE_AS_GPIO 0x02
|
||||||
|
|
||||||
|
#define I3100_GPIO_SEL_MASK 0x0c
|
||||||
|
#define I3100_GPIO_SEL_DEFAULT 0x00
|
||||||
|
#define I3100_GPIO_SEL_OUTPUT 0x04
|
||||||
|
#define I3100_GPIO_SEL_INPUT 0x08
|
||||||
|
|
||||||
|
#define I3100_GPIO_LVL_MASK 0x30
|
||||||
|
#define I3100_GPIO_LVL_DEFAULT 0x00
|
||||||
|
#define I3100_GPIO_LVL_LOW 0x10
|
||||||
|
#define I3100_GPIO_LVL_HIGH 0x20
|
||||||
|
#define I3100_GPIO_LVL_BLINK 0x30
|
||||||
|
|
||||||
|
#define I3100_GPIO_INV_MASK 0xc0
|
||||||
|
#define I3100_GPIO_INV_DEFAULT 0x00
|
||||||
|
#define I3100_GPIO_INV_OFF 0x40
|
||||||
|
#define I3100_GPIO_INV_ON 0x80
|
||||||
|
|
||||||
|
/* GPIO use select */
|
||||||
|
u8 gpio[64];
|
||||||
|
u32 pirq_a_d;
|
||||||
|
u32 pirq_e_h;
|
||||||
|
};
|
||||||
|
extern struct chip_operations southbridge_intel_i3100_ops;
|
||||||
|
|
@ -0,0 +1,69 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* This code is based on src/southbridge/intel/esb6300/esb6300.c */
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
|
||||||
|
void i3100_enable(device_t dev)
|
||||||
|
{
|
||||||
|
device_t lpc_dev;
|
||||||
|
u32 index = 0;
|
||||||
|
u16 reg_old, reg;
|
||||||
|
|
||||||
|
/* See if we are behind the i3100 PCI bridge */
|
||||||
|
lpc_dev = dev_find_slot(dev->bus->secondary, PCI_DEVFN(0x1f, 0));
|
||||||
|
if ((dev->path.u.pci.devfn & 0xf8) == 0xf8) {
|
||||||
|
index = dev->path.u.pci.devfn & 7;
|
||||||
|
}
|
||||||
|
else if ((dev->path.u.pci.devfn & 0xf8) == 0xe8) {
|
||||||
|
index = (dev->path.u.pci.devfn & 7) + 8;
|
||||||
|
}
|
||||||
|
if ((!lpc_dev) || (index >= 16) || ((1 << index) & 0x3091)) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if ((lpc_dev->vendor != PCI_VENDOR_ID_INTEL) ||
|
||||||
|
(lpc_dev->device != PCI_DEVICE_ID_INTEL_3100_LPC)) {
|
||||||
|
u32 id;
|
||||||
|
id = pci_read_config32(lpc_dev, PCI_VENDOR_ID);
|
||||||
|
if (id != (PCI_VENDOR_ID_INTEL |
|
||||||
|
(PCI_DEVICE_ID_INTEL_3100_LPC << 16))) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
reg = reg_old = pci_read_config16(lpc_dev, 0xf2);
|
||||||
|
reg &= ~(1 << index);
|
||||||
|
if (!dev->enabled) {
|
||||||
|
reg |= (1 << index);
|
||||||
|
}
|
||||||
|
if (reg != reg_old) {
|
||||||
|
pci_write_config16(lpc_dev, 0xf2, reg);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations southbridge_intel_i3100_ops = {
|
||||||
|
CHIP_NAME("Intel 3100 Southbridge")
|
||||||
|
.enable_dev = i3100_enable,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef SOUTHBRIDGE_INTEL_I3100_I3100_H
|
||||||
|
#define SOUTHBRIDGE_INTEL_I3100_I3100_H
|
||||||
|
#include "chip.h"
|
||||||
|
|
||||||
|
void i3100_enable(device_t dev);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,32 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
static void i3100_enable_superio(void)
|
||||||
|
{
|
||||||
|
device_t dev;
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_INTEL,
|
||||||
|
PCI_DEVICE_ID_INTEL_3100_LPC), 0);
|
||||||
|
if (dev == PCI_DEV_INVALID) {
|
||||||
|
die("LPC bridge not found\r\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Enable decoding of I/O locations for SuperIO devices */
|
||||||
|
pci_write_config16(dev, 0x82, 0x340f);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,47 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "i3100_smbus.h"
|
||||||
|
|
||||||
|
#define SMBUS_IO_BASE 0x0f00
|
||||||
|
|
||||||
|
static void enable_smbus(void)
|
||||||
|
{
|
||||||
|
device_t dev;
|
||||||
|
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_INTEL,
|
||||||
|
PCI_DEVICE_ID_INTEL_3100_SMB), 0);
|
||||||
|
if (dev == PCI_DEV_INVALID) {
|
||||||
|
die("SMBus controller not found\r\n");
|
||||||
|
}
|
||||||
|
print_spew("SMBus controller enabled\r\n");
|
||||||
|
pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
|
||||||
|
pci_write_config8(dev, 0x40, 1);
|
||||||
|
pci_write_config8(dev, 0x4, 1);
|
||||||
|
/* SMBALERT_DIS */
|
||||||
|
outb(4, SMBUS_IO_BASE + SMBSLVCMD);
|
||||||
|
|
||||||
|
/* Disable interrupt generation */
|
||||||
|
outb(0, SMBUS_IO_BASE + SMBHSTCTL);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_read_byte(u32 device, u32 address)
|
||||||
|
{
|
||||||
|
return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,62 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
|
||||||
|
static void ehci_init(struct device *dev)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
|
||||||
|
{
|
||||||
|
u8 access_cntl;
|
||||||
|
access_cntl = pci_read_config8(dev, 0x80);
|
||||||
|
/* Enable writes to protected registers */
|
||||||
|
pci_write_config8(dev, 0x80, access_cntl | 1);
|
||||||
|
/* Write the subsystem vendor and device id */
|
||||||
|
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
|
||||||
|
((device & 0xffff) << 16) | (vendor & 0xffff));
|
||||||
|
/* Restore protection */
|
||||||
|
pci_write_config8(dev, 0x80, access_cntl);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_operations lops_pci = {
|
||||||
|
.set_subsystem = &ehci_set_subsystem,
|
||||||
|
};
|
||||||
|
static struct device_operations ehci_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = ehci_init,
|
||||||
|
.scan_bus = 0,
|
||||||
|
.enable = i3100_enable,
|
||||||
|
.ops_pci = &lops_pci,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver ehci_driver __pci_driver = {
|
||||||
|
.ops = &ehci_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_EHCI,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,311 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2004 Linux Networx
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* This code is based on src/southbridge/intel/esb6300/esb6300_lpc.c */
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <pc80/mc146818rtc.h>
|
||||||
|
#include <pc80/isa-dma.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
|
||||||
|
#define ACPI_BAR 0x40
|
||||||
|
#define GPIO_BAR 0x48
|
||||||
|
#define RCBA 0xf0
|
||||||
|
|
||||||
|
#define NMI_OFF 0
|
||||||
|
#define MAINBOARD_POWER_OFF 0
|
||||||
|
#define MAINBOARD_POWER_ON 1
|
||||||
|
|
||||||
|
#ifndef MAINBOARD_POWER_ON_AFTER_FAIL
|
||||||
|
#define MAINBOARD_POWER_ON_AFTER_FAIL MAINBOARD_POWER_ON
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define ALL (0xff << 24)
|
||||||
|
#define NONE (0)
|
||||||
|
#define DISABLED (1 << 16)
|
||||||
|
#define ENABLED (0 << 16)
|
||||||
|
#define TRIGGER_EDGE (0 << 15)
|
||||||
|
#define TRIGGER_LEVEL (1 << 15)
|
||||||
|
#define POLARITY_HIGH (0 << 13)
|
||||||
|
#define POLARITY_LOW (1 << 13)
|
||||||
|
#define PHYSICAL_DEST (0 << 11)
|
||||||
|
#define LOGICAL_DEST (1 << 11)
|
||||||
|
#define ExtINT (7 << 8)
|
||||||
|
#define NMI (4 << 8)
|
||||||
|
#define SMI (2 << 8)
|
||||||
|
#define INT (1 << 8)
|
||||||
|
|
||||||
|
static void setup_ioapic(device_t dev)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
u32 value_low, value_high;
|
||||||
|
u32 ioapic_base = 0xfec00000;
|
||||||
|
volatile u32 *l;
|
||||||
|
u32 interrupts;
|
||||||
|
struct resource *res;
|
||||||
|
|
||||||
|
/* Enable IO APIC */
|
||||||
|
res = find_resource(dev, RCBA);
|
||||||
|
if (!res) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
*((u8 *)(res->base + 0x31ff)) |= (1 << 0);
|
||||||
|
|
||||||
|
l = (u32 *) ioapic_base;
|
||||||
|
|
||||||
|
l[0] = 0x01;
|
||||||
|
interrupts = (l[04] >> 16) & 0xff;
|
||||||
|
for (i = 0; i < interrupts; i++) {
|
||||||
|
l[0] = (i * 2) + 0x10;
|
||||||
|
l[4] = DISABLED;
|
||||||
|
value_low = l[4];
|
||||||
|
l[0] = (i * 2) + 0x11;
|
||||||
|
l[4] = NONE; /* Should this be an address? */
|
||||||
|
value_high = l[4];
|
||||||
|
if (value_low == 0xffffffff) {
|
||||||
|
printk_warning("%d IO APIC not responding.\n",
|
||||||
|
dev_path(dev));
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Put the APIC in virtual wire mode */
|
||||||
|
l[0] = 0x10;
|
||||||
|
l[4] = ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define SERIRQ_CNTL 0x64
|
||||||
|
static void i3100_enable_serial_irqs(device_t dev)
|
||||||
|
{
|
||||||
|
/* set packet length and toggle silent mode bit */
|
||||||
|
pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(1 << 6)|((21 - 17) << 2)|(0 << 0));
|
||||||
|
pci_write_config8(dev, SERIRQ_CNTL, (1 << 7)|(0 << 6)|((21 - 17) << 2)|(0 << 0));
|
||||||
|
}
|
||||||
|
|
||||||
|
typedef struct southbridge_intel_i3100_config config_t;
|
||||||
|
|
||||||
|
static void set_i3100_gpio_use_sel(
|
||||||
|
device_t dev, struct resource *res, config_t *config)
|
||||||
|
{
|
||||||
|
u32 gpio_use_sel, gpio_use_sel2;
|
||||||
|
|
||||||
|
gpio_use_sel = 0x1b0ce7c3;
|
||||||
|
gpio_use_sel2 = 0x00000107;
|
||||||
|
outl(gpio_use_sel, res->base + 0x00);
|
||||||
|
outl(gpio_use_sel2, res->base + 0x30);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void set_i3100_gpio_direction(
|
||||||
|
device_t dev, struct resource *res, config_t *config)
|
||||||
|
{
|
||||||
|
u32 gpio_io_sel, gpio_io_sel2;
|
||||||
|
|
||||||
|
gpio_io_sel = 0xed00ffff;
|
||||||
|
gpio_io_sel2 = 0x00000307;
|
||||||
|
outl(gpio_io_sel, res->base + 0x04);
|
||||||
|
outl(gpio_io_sel2, res->base + 0x34);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void set_i3100_gpio_level(
|
||||||
|
device_t dev, struct resource *res, config_t *config)
|
||||||
|
{
|
||||||
|
u32 gpio_lvl, gpio_lvl2;
|
||||||
|
u32 gpio_blink;
|
||||||
|
|
||||||
|
gpio_lvl = 0x00030000;
|
||||||
|
gpio_blink = 0x00000000;
|
||||||
|
gpio_lvl2 = 0x00000300;
|
||||||
|
outl(gpio_lvl, res->base + 0x0c);
|
||||||
|
outl(gpio_blink, res->base + 0x18);
|
||||||
|
outl(gpio_lvl2, res->base + 0x38);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void set_i3100_gpio_inv(
|
||||||
|
device_t dev, struct resource *res, config_t *config)
|
||||||
|
{
|
||||||
|
u32 gpio_inv;
|
||||||
|
|
||||||
|
gpio_inv = 0x00006000;
|
||||||
|
outl(gpio_inv, res->base + 0x2c);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void i3100_pirq_init(device_t dev)
|
||||||
|
{
|
||||||
|
config_t *config;
|
||||||
|
|
||||||
|
/* Get the chip configuration */
|
||||||
|
config = dev->chip_info;
|
||||||
|
|
||||||
|
if(config->pirq_a_d) {
|
||||||
|
pci_write_config32(dev, 0x60, config->pirq_a_d);
|
||||||
|
}
|
||||||
|
if(config->pirq_e_h) {
|
||||||
|
pci_write_config32(dev, 0x68, config->pirq_e_h);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static void i3100_gpio_init(device_t dev)
|
||||||
|
{
|
||||||
|
struct resource *res;
|
||||||
|
config_t *config;
|
||||||
|
|
||||||
|
/* Skip if I don't have any configuration */
|
||||||
|
if (!dev->chip_info) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
/* The programmer is responsible for ensuring
|
||||||
|
* a valid gpio configuration.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Get the chip configuration */
|
||||||
|
config = dev->chip_info;
|
||||||
|
/* Find the GPIO bar */
|
||||||
|
res = find_resource(dev, GPIO_BAR);
|
||||||
|
if (!res) {
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Set the use selects */
|
||||||
|
set_i3100_gpio_use_sel(dev, res, config);
|
||||||
|
|
||||||
|
/* Set the IO direction */
|
||||||
|
set_i3100_gpio_direction(dev, res, config);
|
||||||
|
|
||||||
|
/* Setup the input inverters */
|
||||||
|
set_i3100_gpio_inv(dev, res, config);
|
||||||
|
|
||||||
|
/* Set the value on the GPIO output pins */
|
||||||
|
set_i3100_gpio_level(dev, res, config);
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static void lpc_init(struct device *dev)
|
||||||
|
{
|
||||||
|
u8 byte;
|
||||||
|
int pwr_on = MAINBOARD_POWER_ON_AFTER_FAIL;
|
||||||
|
|
||||||
|
setup_ioapic(dev);
|
||||||
|
|
||||||
|
/* Decode 0xffc00000 - 0xffffffff to fwh idsel 0 */
|
||||||
|
pci_write_config32(dev, 0xd0, 0x00000000);
|
||||||
|
|
||||||
|
i3100_enable_serial_irqs(dev);
|
||||||
|
|
||||||
|
get_option(&pwr_on, "power_on_after_fail");
|
||||||
|
byte = pci_read_config8(dev, 0xa4);
|
||||||
|
byte &= 0xfe;
|
||||||
|
if (!pwr_on) {
|
||||||
|
byte |= 1;
|
||||||
|
}
|
||||||
|
pci_write_config8(dev, 0xa4, byte);
|
||||||
|
printk_info("set power %s after power fail\n", pwr_on ? "on" : "off");
|
||||||
|
|
||||||
|
/* Set up the PIRQ */
|
||||||
|
i3100_pirq_init(dev);
|
||||||
|
|
||||||
|
/* Set the state of the gpio lines */
|
||||||
|
i3100_gpio_init(dev);
|
||||||
|
|
||||||
|
/* Initialize the real time clock */
|
||||||
|
rtc_init(0);
|
||||||
|
|
||||||
|
/* Initialize isa dma */
|
||||||
|
isa_dma_init();
|
||||||
|
}
|
||||||
|
|
||||||
|
static void i3100_lpc_read_resources(device_t dev)
|
||||||
|
{
|
||||||
|
struct resource *res;
|
||||||
|
|
||||||
|
/* Get the normal pci resources of this device */
|
||||||
|
pci_dev_read_resources(dev);
|
||||||
|
|
||||||
|
/* Add the ACPI BAR */
|
||||||
|
res = pci_get_resource(dev, ACPI_BAR);
|
||||||
|
|
||||||
|
/* Add the GPIO BAR */
|
||||||
|
res = pci_get_resource(dev, GPIO_BAR);
|
||||||
|
|
||||||
|
/* Add an extra subtractive resource for both memory and I/O */
|
||||||
|
res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
|
||||||
|
res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
|
||||||
|
|
||||||
|
res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
|
||||||
|
res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
|
||||||
|
|
||||||
|
/* Add resource for RCBA */
|
||||||
|
res = new_resource(dev, RCBA);
|
||||||
|
res->size = 0x4000;
|
||||||
|
res->limit = 0xffffc000;
|
||||||
|
res->align = 14;
|
||||||
|
res->gran = 14;
|
||||||
|
res->flags = IORESOURCE_MEM;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void i3100_lpc_enable_resources(device_t dev)
|
||||||
|
{
|
||||||
|
u8 acpi_cntl, gpio_cntl;
|
||||||
|
|
||||||
|
/* Enable the normal pci resources */
|
||||||
|
pci_dev_enable_resources(dev);
|
||||||
|
|
||||||
|
/* Enable the ACPI bar */
|
||||||
|
acpi_cntl = pci_read_config8(dev, 0x44);
|
||||||
|
acpi_cntl |= (1 << 4);
|
||||||
|
pci_write_config8(dev, 0x44, acpi_cntl);
|
||||||
|
|
||||||
|
/* Enable the GPIO bar */
|
||||||
|
gpio_cntl = pci_read_config8(dev, 0x4c);
|
||||||
|
gpio_cntl |= (1 << 4);
|
||||||
|
pci_write_config8(dev, 0x4c, gpio_cntl);
|
||||||
|
|
||||||
|
/* Enable the RCBA */
|
||||||
|
pci_write_config32(dev, RCBA, pci_read_config32(dev, RCBA) | (1 << 0));
|
||||||
|
|
||||||
|
enable_childrens_resources(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_operations lops_pci = {
|
||||||
|
.set_subsystem = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct device_operations lpc_ops = {
|
||||||
|
.read_resources = i3100_lpc_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = i3100_lpc_enable_resources,
|
||||||
|
.init = lpc_init,
|
||||||
|
.scan_bus = scan_static_bus,
|
||||||
|
.enable = i3100_enable,
|
||||||
|
.ops_pci = &lops_pci,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver lpc_driver __pci_driver = {
|
||||||
|
.ops = &lpc_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_LPC,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,46 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
|
||||||
|
static void pci_init(struct device *dev)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct device_operations pci_ops = {
|
||||||
|
.read_resources = pci_bus_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_bus_enable_resources,
|
||||||
|
.init = pci_init,
|
||||||
|
.scan_bus = pci_scan_bridge,
|
||||||
|
.ops_pci = 0,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver pci_driver __pci_driver = {
|
||||||
|
.ops = &pci_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_PCI,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <arch/io.h>
|
||||||
|
|
||||||
|
void hard_reset(void)
|
||||||
|
{
|
||||||
|
outb(0x06, 0xcf9);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,89 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* This code is based on src/southbridge/intel/esb6300/esb6300_sata.c */
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
|
||||||
|
static void sata_init(struct device *dev)
|
||||||
|
{
|
||||||
|
/* Enable SATA devices */
|
||||||
|
|
||||||
|
printk_debug("SATA init\n");
|
||||||
|
/* SATA configuration */
|
||||||
|
pci_write_config8(dev, 0x04, 0x07);
|
||||||
|
pci_write_config8(dev, 0x09, 0x8f);
|
||||||
|
|
||||||
|
/* Set timings */
|
||||||
|
pci_write_config16(dev, 0x40, 0x0a307);
|
||||||
|
pci_write_config16(dev, 0x42, 0x0a307);
|
||||||
|
|
||||||
|
/* Sync DMA */
|
||||||
|
pci_write_config16(dev, 0x48, 0x000f);
|
||||||
|
pci_write_config16(dev, 0x4a, 0x1111);
|
||||||
|
|
||||||
|
/* Fast ATA */
|
||||||
|
pci_write_config16(dev, 0x54, 0x1000);
|
||||||
|
|
||||||
|
/* Select IDE mode */
|
||||||
|
pci_write_config8(dev, 0x90, 0x00);
|
||||||
|
|
||||||
|
/* Enable ports 0-3 */
|
||||||
|
pci_write_config8(dev, 0x92, 0x0f);
|
||||||
|
|
||||||
|
printk_debug("SATA Enabled\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
|
||||||
|
{
|
||||||
|
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
|
||||||
|
((device & 0xffff) << 16) | (vendor & 0xffff));
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_operations lops_pci = {
|
||||||
|
.set_subsystem = sata_set_subsystem,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct device_operations sata_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = sata_init,
|
||||||
|
.scan_bus = 0,
|
||||||
|
.ops_pci = &lops_pci,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver sata_driver __pci_driver = {
|
||||||
|
.ops = &sata_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_SATA,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver sata_driver_nr __pci_driver = {
|
||||||
|
.ops = &sata_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_SATA_R,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
@ -0,0 +1,74 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/path.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/smbus.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
#include "i3100_smbus.h"
|
||||||
|
|
||||||
|
static int lsmbus_read_byte(device_t dev, u8 address)
|
||||||
|
{
|
||||||
|
u16 device;
|
||||||
|
struct resource *res;
|
||||||
|
struct bus *pbus;
|
||||||
|
|
||||||
|
device = dev->path.u.i2c.device;
|
||||||
|
pbus = get_pbus_smbus(dev);
|
||||||
|
res = find_resource(pbus->dev, 0x20);
|
||||||
|
|
||||||
|
return do_smbus_read_byte(res->base, device, address);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct smbus_bus_operations lops_smbus_bus = {
|
||||||
|
.read_byte = lsmbus_read_byte,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device)
|
||||||
|
{
|
||||||
|
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
|
||||||
|
((device & 0xffff) << 16) | (vendor & 0xffff));
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_operations lops_pci = {
|
||||||
|
.set_subsystem = &smbus_set_subsystem,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct device_operations smbus_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = 0,
|
||||||
|
.scan_bus = scan_static_bus,
|
||||||
|
.enable = i3100_enable,
|
||||||
|
.ops_pci = &lops_pci,
|
||||||
|
.ops_smbus_bus = &lops_smbus_bus,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver smbus_driver __pci_driver = {
|
||||||
|
.ops = &smbus_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_SMB,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
@ -0,0 +1,113 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* This code is based on src/southbridge/intel/esb6300/esb6300_smbus.h */
|
||||||
|
|
||||||
|
#include <device/smbus_def.h>
|
||||||
|
|
||||||
|
#define SMBHSTSTAT 0x0
|
||||||
|
#define SMBHSTCTL 0x2
|
||||||
|
#define SMBHSTCMD 0x3
|
||||||
|
#define SMBXMITADD 0x4
|
||||||
|
#define SMBHSTDAT0 0x5
|
||||||
|
#define SMBHSTDAT1 0x6
|
||||||
|
#define SMBBLKDAT 0x7
|
||||||
|
#define SMBTRNSADD 0x9
|
||||||
|
#define SMBSLVDATA 0xa
|
||||||
|
#define SMLINK_PIN_CTL 0xe
|
||||||
|
#define SMBUS_PIN_CTL 0xf
|
||||||
|
#define SMBSLVCMD 0x11
|
||||||
|
|
||||||
|
#define SMBUS_TIMEOUT (100*1000*10)
|
||||||
|
|
||||||
|
static void smbus_delay(void)
|
||||||
|
{
|
||||||
|
outb(0x80, 0x80);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_wait_until_ready(u32 smbus_io_base)
|
||||||
|
{
|
||||||
|
u32 loops = SMBUS_TIMEOUT;
|
||||||
|
u8 byte;
|
||||||
|
do {
|
||||||
|
smbus_delay();
|
||||||
|
if (--loops == 0)
|
||||||
|
break;
|
||||||
|
byte = inb(smbus_io_base + SMBHSTSTAT);
|
||||||
|
} while (byte & 1);
|
||||||
|
return loops ? 0 : -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int smbus_wait_until_done(u32 smbus_io_base)
|
||||||
|
{
|
||||||
|
u32 loops = SMBUS_TIMEOUT;
|
||||||
|
u8 byte;
|
||||||
|
do {
|
||||||
|
smbus_delay();
|
||||||
|
if (--loops == 0)
|
||||||
|
break;
|
||||||
|
byte = inb(smbus_io_base + SMBHSTSTAT);
|
||||||
|
} while ((byte & 1) || (byte & ~((1 << 6)|(1 << 0))) == 0);
|
||||||
|
return loops ? 0 : -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int do_smbus_read_byte(u32 smbus_io_base, u16 device, u8 address)
|
||||||
|
{
|
||||||
|
u8 global_status_register;
|
||||||
|
u8 byte;
|
||||||
|
|
||||||
|
if (smbus_wait_until_ready(smbus_io_base) < 0) {
|
||||||
|
return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
|
||||||
|
}
|
||||||
|
/* setup transaction */
|
||||||
|
/* disable interrupts */
|
||||||
|
outb(inb(smbus_io_base + SMBHSTCTL) & (~1), smbus_io_base + SMBHSTCTL);
|
||||||
|
/* set the device I'm talking too */
|
||||||
|
outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBXMITADD);
|
||||||
|
/* set the command/address... */
|
||||||
|
outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
|
||||||
|
/* set up for a byte data read */
|
||||||
|
outb((inb(smbus_io_base + SMBHSTCTL) & 0xE3) | (0x2 << 2), smbus_io_base + SMBHSTCTL);
|
||||||
|
/* clear any lingering errors, so the transaction will run */
|
||||||
|
outb(inb(smbus_io_base + SMBHSTSTAT), smbus_io_base + SMBHSTSTAT);
|
||||||
|
|
||||||
|
/* clear the data byte...*/
|
||||||
|
outb(0, smbus_io_base + SMBHSTDAT0);
|
||||||
|
|
||||||
|
/* start the command */
|
||||||
|
outb((inb(smbus_io_base + SMBHSTCTL) | 0x40), smbus_io_base + SMBHSTCTL);
|
||||||
|
|
||||||
|
/* poll for transaction completion */
|
||||||
|
if (smbus_wait_until_done(smbus_io_base) < 0) {
|
||||||
|
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
|
||||||
|
}
|
||||||
|
|
||||||
|
global_status_register = inb(smbus_io_base + SMBHSTSTAT);
|
||||||
|
|
||||||
|
/* Ignore the In Use Status... */
|
||||||
|
global_status_register &= ~(3 << 5);
|
||||||
|
|
||||||
|
/* read results of transaction */
|
||||||
|
byte = inb(smbus_io_base + SMBHSTDAT0);
|
||||||
|
if (global_status_register != (1 << 1)) {
|
||||||
|
return SMBUS_ERROR;
|
||||||
|
}
|
||||||
|
return byte;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,62 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Arastra, Inc.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <device/pci.h>
|
||||||
|
#include <device/pci_ids.h>
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include "i3100.h"
|
||||||
|
|
||||||
|
static void uhci_init(struct device *dev)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
static void uhci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
|
||||||
|
{
|
||||||
|
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
|
||||||
|
((device & 0xffff) << 16) | (vendor & 0xffff));
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct pci_operations lops_pci = {
|
||||||
|
.set_subsystem = &uhci_set_subsystem,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct device_operations uhci_ops = {
|
||||||
|
.read_resources = pci_dev_read_resources,
|
||||||
|
.set_resources = pci_dev_set_resources,
|
||||||
|
.enable_resources = pci_dev_enable_resources,
|
||||||
|
.init = uhci_init,
|
||||||
|
.scan_bus = 0,
|
||||||
|
.enable = i3100_enable,
|
||||||
|
.ops_pci = &lops_pci,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver uhci_driver __pci_driver = {
|
||||||
|
.ops = &uhci_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_USB,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct pci_driver usb2_driver __pci_driver = {
|
||||||
|
.ops = &uhci_ops,
|
||||||
|
.vendor = PCI_VENDOR_ID_INTEL,
|
||||||
|
.device = PCI_DEVICE_ID_INTEL_3100_USB2,
|
||||||
|
};
|
||||||
Loading…
Reference in New Issue