mb/google/volteer: sync'ing todor with terrador
Todor is created to take the place of terrador therefore copying terrador content into todor's setup. BUG=b:162110806 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TODOR Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I63151728a04f2252ca8a77158a2656ad8b1e1b51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This commit is contained in:
YH Lin
Nick Vaccaro
parent
32c505715c
commit
abe549cac7
|
|
@ -0,0 +1,7 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
bootblock-y += gpio.c
|
||||
|
||||
romstage-y += memory.c
|
||||
|
||||
ramstage-y += gpio.c
|
||||
|
|
@ -0,0 +1,229 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <variant/gpio.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <commonlib/helpers.h>
|
||||
|
||||
/* Pad configuration in ramstage */
|
||||
static const struct pad_config override_gpio_table[] = {
|
||||
/* A7 : I2S2_SCLK ==> I2S1_SPKR_SCLK */
|
||||
PAD_CFG_NF(GPP_A7, NONE, DEEP, NF1),
|
||||
/* A8 : I2S2_SFRM ==> I2S1_SPKR_SFRM */
|
||||
PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
|
||||
/* A9 : I2S2_TXD ==> I2S1_PCH_TX_SPKR_RX */
|
||||
PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
|
||||
/* A10 : I2S2_RXD ==> I2S1_PCH_RX_SPKR */
|
||||
PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
|
||||
/* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */
|
||||
PAD_CFG_GPO(GPP_A13, 1, DEEP),
|
||||
/* A16 : USB_OC3# ==> USB_C0_OC_ODL */
|
||||
PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
|
||||
/* A18 : DDSP_HPDB ==> HDMI_HPD */
|
||||
PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
|
||||
/* A19 : DDSP_HPD1 ==> USB_C0_DP_HPD */
|
||||
PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1),
|
||||
/* A20 : DDSP_HPD2 ==> USB_C1_DP_HPD */
|
||||
PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1),
|
||||
/* A21 : DDPC_CTRCLK ==> EN_FP_PWR */
|
||||
PAD_CFG_GPO(GPP_A21, 1, DEEP),
|
||||
/* A22 : DDPC_CTRLDATA ==> EN_HDMI_PWR */
|
||||
PAD_CFG_GPO(GPP_A22, 1, DEEP),
|
||||
|
||||
/* B2 : VRALERT# ==> NC */
|
||||
PAD_NC(GPP_B2, NONE),
|
||||
/* B7 : ISH_12C1_SDA ==> ISH_I2C1_SENSOR_SDA */
|
||||
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
|
||||
/* B8 : ISH_I2C1_SCL ==> ISH_I2C1_SENSOR_SCL */
|
||||
PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1),
|
||||
/* B9 : I2C5_SDA ==> PCH_I2C5_TRACKPAD_SDA */
|
||||
PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
|
||||
/* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */
|
||||
PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
|
||||
/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
|
||||
PAD_CFG_NF(GPP_B18, DN_20K, DEEP, NF1),
|
||||
/* B19 : GSPI1_CS0# ==> PCH_GSPI1_FPMCU_CS_L */
|
||||
PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),
|
||||
/* B20 : GSPI1_CLK ==> PCH_GSPI1_FPMCU_CLK */
|
||||
PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1),
|
||||
/* B21 : GSPI1_MISO ==> PCH_GSPI1_FPMCU_MISO */
|
||||
PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1),
|
||||
/* B23 : SML1ALERT# ==> GPP_B23_STRAP # */
|
||||
PAD_NC(GPP_B23, DN_20K),
|
||||
|
||||
/* C0 : SMBCLK ==> EN_PP3300_WLAN */
|
||||
PAD_CFG_GPO(GPP_C0, 1, DEEP),
|
||||
/* C2 : SMBALERT# ==> GPP_C2_STRAP */
|
||||
PAD_NC(GPP_C2, DN_20K),
|
||||
/* C3 : SML0CLK ==> USB4_SMB_SCL */
|
||||
PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1),
|
||||
/* C4 : SML0DATA ==> USB4_SMB_SDA */
|
||||
PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1),
|
||||
/* C5 : SML0ALERT# ==> USB_SMB_INT_L_BOOT_STRAP0 */
|
||||
PAD_NC(GPP_C5, DN_20K),
|
||||
/* C7 : SML1DATA ==> EN_USI_CHARGE */
|
||||
PAD_CFG_GPO(GPP_C7, 1, DEEP),
|
||||
/* C10 : UART0_RTS# ==> USI_RST_L */
|
||||
PAD_CFG_GPO(GPP_C10, 1, DEEP),
|
||||
/* C13 : UART1_TXD ==> EN_PP5000_TRACKPAD */
|
||||
PAD_CFG_GPO(GPP_C13, 1, DEEP),
|
||||
/* C16 : I2C0_SDA ==> PCH_I2C0_1V8_AUDIO_SDA */
|
||||
PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
|
||||
/* C17 : I2C0_SCL ==> PCH_I2C0_1V8_AUDIO_SCL */
|
||||
PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
|
||||
/* C18 : I2C1_SDA ==> PCH_I2C1_TOUCH_USI_SDA */
|
||||
PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
|
||||
/* C19 : I2C1_SCL ==> PCH_I2C1_TOUCH_USI_SCL */
|
||||
PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
|
||||
/* C20 : UART2_RXD ==> FPMCU_INT_L */
|
||||
PAD_CFG_GPI_INT(GPP_C20, NONE, PLTRST, LEVEL),
|
||||
/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
|
||||
PAD_CFG_GPO(GPP_C22, 0, DEEP),
|
||||
/* C23 : UART2_CTS# ==> FPMCU_RST_ODL */
|
||||
PAD_CFG_GPO(GPP_C23, 1, DEEP),
|
||||
|
||||
/* D0 : ISH_GP0 ==> ISH_IMU_INT_L */
|
||||
PAD_CFG_GPI(GPP_D0, NONE, DEEP),
|
||||
/* D1 : ISH_GP1 ==> ISH_ACCEL_INT_L */
|
||||
PAD_CFG_GPI(GPP_D1, NONE, DEEP),
|
||||
/* D2 : ISH_GP2 ==> ISH_LID_OPEN */
|
||||
PAD_CFG_GPI(GPP_D2, NONE, DEEP),
|
||||
/* D8 : SRCCLKREQ3# ==> SD_CLKREQ_ODL */
|
||||
PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1),
|
||||
/* D10 : ISH_SPI_CLK ==> PCH_GSPI2_CVF_CLK_STRAP */
|
||||
PAD_CFG_NF(GPP_D10, DN_20K, DEEP, NF7),
|
||||
/* D12 : ISH_SPI_MOSI ==> PCH_GSPI2_CVF_MISO_STRAP */
|
||||
PAD_CFG_NF(GPP_D12, DN_20K, DEEP, NF7),
|
||||
/* D13 : ISH_UART0_RXD ==> UART_ISH_RX_DEBUG_TX */
|
||||
PAD_CFG_NF(GPP_D13, NONE, DEEP, NF1),
|
||||
/* D14 : ISH_UART0_TXD ==> UART_ISH_TX_DEBUG_RX */
|
||||
PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1),
|
||||
/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
|
||||
PAD_CFG_GPO(GPP_D16, 1, DEEP),
|
||||
|
||||
/* E1 : SPI1_IO2 ==> PEN_DET_ODL */
|
||||
PAD_CFG_GPI_SCI_LOW(GPP_E1, NONE, DEEP, EDGE_SINGLE),
|
||||
/* E3 : CPU_GP0 ==> USI_REPORT_EN */
|
||||
PAD_CFG_GPO(GPP_E3, 1, DEEP),
|
||||
/* E7 : CPU_GP1 ==> USI_INT */
|
||||
PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE),
|
||||
/* E10 : SPI1_CS# ==> NC */
|
||||
PAD_NC(GPP_E10, NONE),
|
||||
/* E11 : SPI1_CLK ==> SD_PE_WAKE_ODL */
|
||||
PAD_CFG_GPI(GPP_E11, NONE, DEEP),
|
||||
/* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */
|
||||
PAD_CFG_GPI(GPP_E12, NONE, DEEP),
|
||||
/* E13 : SPI1_MOSI_IO0 ==> NC */
|
||||
PAD_NC(GPP_E13, NONE),
|
||||
/* E15 : ISH_GP6 ==> TRACKPAD_INT_ODL */
|
||||
PAD_CFG_GPI_IRQ_WAKE(GPP_E15, NONE, DEEP, LEVEL, INVERT),
|
||||
/* E16 : ISH_GP7 ==> USB_A0_RT_RST_ODL */
|
||||
PAD_CFG_GPO(GPP_E16, 1, DEEP),
|
||||
/* E17 : THC0_SPI1_INT# ==> PEN_DET_ODL */
|
||||
PAD_CFG_GPI_SCI_LOW(GPP_E1, NONE, DEEP, EDGE_SINGLE),
|
||||
/* E19 : DDP1_CTRLDATA ==> USB0_C0_LSX_SOC_RX_STRAP */
|
||||
PAD_CFG_NF(GPP_E19, DN_20K, DEEP, NF4),
|
||||
|
||||
/* F7 : GPPF7_STRAP */
|
||||
PAD_NC(GPP_F7, DN_20K),
|
||||
/* F11 : THC1_SPI2_CLK ==> NC */
|
||||
PAD_NC(GPP_F11, NONE),
|
||||
/* F12 : GSXDOUT ==> EN_PP3300_TRACKPAD */
|
||||
PAD_CFG_GPO(GPP_F12, 1, DEEP),
|
||||
/* F13 : GSXDOUT ==> WiFi_DISABLE_L */
|
||||
PAD_CFG_GPO(GPP_F13, 1, DEEP),
|
||||
/* F16 : GSXCLK ==> EN_PP3300_TOUCHSCREEN */
|
||||
PAD_CFG_GPO(GPP_F16, 1, DEEP),
|
||||
/* F17 : WWAN_RF_DISABLE_ODL ==> EC_IN_RW_OD */
|
||||
PAD_CFG_GPI(GPP_F17, NONE, DEEP),
|
||||
/* F18 : THC1_SPI2_INT# ==> EN_SPKR_PA */
|
||||
PAD_CFG_GPO(GPP_F18, 1, DEEP),
|
||||
|
||||
/* H0 : GPPH0_BOOT_STRAP1 */
|
||||
PAD_NC(GPP_H0, DN_20K),
|
||||
/* H1 : GPPH1_BOOT_STRAP2 */
|
||||
PAD_NC(GPP_H1, DN_20K),
|
||||
/* H2 : GPPH2_BOOT_STRAP3 */
|
||||
PAD_NC(GPP_H2, DN_20K),
|
||||
/* H3 : SX_EXIT_HOLDOFF# ==> SD_PERST_L */
|
||||
PAD_CFG_GPO(GPP_H3, 1, DEEP),
|
||||
/* H10 : SRCCLKREQ4# ==> USB_C_MIX_RT_FORCE_PWR */
|
||||
PAD_CFG_GPO(GPP_H10, 1, DEEP),
|
||||
/* H13 : M2_SKT2_CFG1 # ==> SPKR_INT_L */
|
||||
PAD_CFG_GPI(GPP_H13, NONE, DEEP),
|
||||
/* H16 : DDPB_CTRLCLK ==> DDPB_HDMI_CTRLCLK */
|
||||
PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1),
|
||||
/* H17 : DDPB_CTRLDATA ==> DDPB_HDMI_CTRLDATA */
|
||||
PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
|
||||
/* H19 : TIME_SYNC0 ==> USER_PRES_FP_ODL_R */
|
||||
PAD_CFG_GPI(GPP_H19, NONE, DEEP),
|
||||
|
||||
/* R0 : HDA_BCLK ==> I2S0_HP_SCLK */
|
||||
PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),
|
||||
/* R1 : HDA_SYNC ==> I2S0_HP_SFRM */
|
||||
PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),
|
||||
/* R2 : HDA_SDO ==> I2S0_PCH_TX_HP_RX_STRAP */
|
||||
PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2),
|
||||
/* R3 : HDA_SDIO ==> I2S0_PCH_RX_HP_TX */
|
||||
PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),
|
||||
/* R5 : HDA_SDI1 ==> HP_INT_L */
|
||||
PAD_CFG_GPI_INT(GPP_R5, NONE, PLTRST, EDGE_BOTH),
|
||||
|
||||
/* S0 : SNDW0_CLK ==> SNDW0_HP_CLK */
|
||||
PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1),
|
||||
/* S1 : SNDW0_DATA ==> SNDW0_HP_DATA */
|
||||
PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1),
|
||||
/* S2 : SNDW1_CLK ==> SNDW1_SPKR_CLK */
|
||||
PAD_CFG_NF(GPP_S2, NONE, DEEP, NF1),
|
||||
/* S3 : SNDW1_DATA ==> SNDW1_SPKR_DATA */
|
||||
PAD_CFG_NF(GPP_S3, NONE, DEEP, NF1),
|
||||
/* S6 : SNDW3_CLK ==> DMIC_CLK0 */
|
||||
PAD_CFG_NF(GPP_S6, NONE, DEEP, NF2),
|
||||
/* S7 : SNDW3_DATA ==> DMIC_DATA0 */
|
||||
PAD_CFG_NF(GPP_S7, NONE, DEEP, NF2),
|
||||
|
||||
/* GPD6: SLP_A# ==> NC */
|
||||
PAD_NC(GPD6, NONE),
|
||||
/* GPD9: SLP_WLAN# ==> SLP_WLAN_L */
|
||||
PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_override_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(override_gpio_table);
|
||||
return override_gpio_table;
|
||||
}
|
||||
|
||||
/* Early pad configuration in bootblock */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */
|
||||
PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
|
||||
/* A17 : DDSP_HPDC ==> MEM_CH_SEL */
|
||||
PAD_CFG_GPI(GPP_A17, NONE, DEEP),
|
||||
|
||||
/* B11 : PMCALERT# ==> PCH_WP_OD */
|
||||
PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
|
||||
/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
|
||||
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
|
||||
/* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */
|
||||
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
|
||||
/* B17 : GSPI0_MISO ==> PCH_GSPI0_H1_TPM_MISO */
|
||||
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
|
||||
/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
|
||||
PAD_CFG_NF(GPP_B18, DN_20K, DEEP, NF1),
|
||||
|
||||
/* C0 : SMBCLK ==> EN_PP3300_WLAN */
|
||||
PAD_CFG_GPO(GPP_C0, 1, DEEP),
|
||||
/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
|
||||
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
|
||||
/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
|
||||
PAD_CFG_GPO(GPP_C22, 0, DEEP),
|
||||
|
||||
/* E12 : SPI1_MISO_IO1 ==> PEN_ALERT_ODL */
|
||||
PAD_CFG_GPI(GPP_E12, NONE, DEEP),
|
||||
};
|
||||
|
||||
const struct pad_config *variant_early_gpio_table(size_t *num)
|
||||
{
|
||||
*num = ARRAY_SIZE(early_gpio_table);
|
||||
return early_gpio_table;
|
||||
}
|
||||
|
|
@ -1,3 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
|
||||
#include <baseboard/acpi/dptf.asl>
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#ifndef __VARIANT_EC_H__
|
||||
#define __VARIANT_EC_H__
|
||||
|
|
|
|||
|
|
@ -1,19 +1,12 @@
|
|||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0-or-later
|
||||
*/
|
||||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#ifndef VARIANT_GPIO_H
|
||||
#define VARIANT_GPIO_H
|
||||
|
||||
#include <baseboard/gpio.h>
|
||||
|
||||
#undef GPIO_EC_IN_RW
|
||||
/* EC in RW */
|
||||
#define GPIO_EC_IN_RW GPP_F17
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,60 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <baseboard/variants.h>
|
||||
|
||||
static const struct lpddr4x_cfg todor_memcfg = {
|
||||
/* DQ byte map */
|
||||
.dq_map = {
|
||||
[0] = {
|
||||
{ 7, 3, 1, 4, 0, 5, 2, 6, }, /* DDR0_DQ0[7:0] */
|
||||
{ 13, 14, 8, 10, 9, 15, 11, 12 }, /* DDR0_DQ1[7:0] */
|
||||
},
|
||||
[1] = {
|
||||
{ 1, 2, 7, 6, 3, 5, 4, 0, }, /* DDR1_DQ0[7:0] */
|
||||
{ 14, 15, 13, 10, 8, 11, 12, 9 }, /* DDR1_DQ1[7:0] */
|
||||
},
|
||||
[2] = {
|
||||
{ 11, 15, 10, 9, 8, 12, 13, 14, }, /* DDR2_DQ0[7:0] */
|
||||
{ 5, 6, 4, 0, 7, 2, 3, 1 }, /* DDR2_DQ1[7:0] */
|
||||
},
|
||||
[3] = {
|
||||
{ 11, 15, 10, 9, 13, 12, 14, 8, }, /* DDR3_DQ0[7:0] */
|
||||
{ 0, 5, 6, 4, 1, 2, 7, 3 }, /* DDR3_DQ1[7:0] */
|
||||
},
|
||||
[4] = {
|
||||
{ 7, 2, 3, 1, 4, 0, 5, 6, }, /* DDR4_DQ0[7:0] */
|
||||
{ 13, 14, 8, 12, 10, 9, 15, 11 }, /* DDR4_DQ1[7:0] */
|
||||
},
|
||||
[5] = {
|
||||
{ 7, 3, 2, 1, 6, 4, 0, 5, }, /* DDR5_DQ0[7:0] */
|
||||
{ 15, 14, 12, 8, 11, 13, 9, 10 }, /* DDR5_DQ1[7:0] */
|
||||
},
|
||||
[6] = {
|
||||
{ 11, 10, 15, 12, 8, 9, 14, 13, }, /* DDR6_DQ0[7:0] */
|
||||
{ 6, 0, 5, 4, 3, 2, 7, 1 }, /* DDR6_DQ1[7:0] */
|
||||
},
|
||||
[7] = {
|
||||
{ 9, 10, 11, 8, 12, 14, 13, 15, }, /* DDR7_DQ0[7:0] */
|
||||
{ 0, 5, 4, 7, 1, 6, 3, 2 }, /* DDR7_DQ1[7:0] */
|
||||
},
|
||||
},
|
||||
|
||||
/* DQS CPU<>DRAM map */
|
||||
.dqs_map = {
|
||||
[0] = { 0, 1 }, /* DDR0_DQS[1:0] */
|
||||
[1] = { 0, 1 }, /* DDR1_DQS[1:0] */
|
||||
[2] = { 1, 0 }, /* DDR2_DQS[1:0] */
|
||||
[3] = { 1, 0 }, /* DDR3_DQS[1:0] */
|
||||
[4] = { 0, 1 }, /* DDR4_DQS[1:0] */
|
||||
[5] = { 0, 1 }, /* DDR5_DQS[1:0] */
|
||||
[6] = { 1, 0 }, /* DDR6_DQS[1:0] */
|
||||
[7] = { 1, 0 }, /* DDR7_DQS[1:0] */
|
||||
},
|
||||
|
||||
.ect = 1, /* Enable Early Command Training */
|
||||
};
|
||||
|
||||
const struct lpddr4x_cfg *variant_memory_params(void)
|
||||
{
|
||||
return &todor_memcfg;
|
||||
}
|
||||
|
|
@ -0,0 +1,6 @@
|
|||
## SPDX-License-Identifier: GPL-2.0-or-later
|
||||
## This is an auto-generated file. Do not edit!!
|
||||
|
||||
SPD_SOURCES =
|
||||
SPD_SOURCES += spd-1.hex # ID = 0(0b0000) Parts = MT53E512M64D4NW-046 WT:E
|
||||
SPD_SOURCES += spd-3.hex # ID = 1(0b0001) Parts = MT53E1G64D8NW-046 WT:E
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
DRAM Part Name ID to assign
|
||||
MT53E512M64D4NW-046 WT:E 0 (0000)
|
||||
MT53E1G64D8NW-046 WT:E 1 (0001)
|
||||
|
|
@ -0,0 +1,2 @@
|
|||
MT53E512M64D4NW-046 WT:E
|
||||
MT53E1G64D8NW-046 WT:E
|
||||
|
|
@ -1,6 +1,130 @@
|
|||
chip soc/intel/tigerlake
|
||||
# BitMask where bits [3:0] are Controller 0 Channel [3:0] and
|
||||
# bits [7:4] are Controller 1 Channel [3:0].
|
||||
# Enable Command Mirroring for controller 0 channel 0 and 1,
|
||||
# and controller 1 channel 0 and 1.
|
||||
register "CmdMirror" = "0x00000033"
|
||||
|
||||
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" # Type-A / Type-C Port 0
|
||||
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC1)" # Type-A / Type-C Port 1
|
||||
register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC1)" # Type-A / Type-C Port 1
|
||||
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Front Camera
|
||||
register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC0)" # Type-A / Type-C Port 0
|
||||
register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A / Type-C Port 0
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A / Type-C Port 1
|
||||
register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used
|
||||
|
||||
register "SaGv" = "SaGv_Disabled"
|
||||
|
||||
device domain 0 on
|
||||
device pci 15.0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_R5)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/max98373
|
||||
register "vmon_slot_no" = "0"
|
||||
register "imon_slot_no" = "1"
|
||||
register "uid" = "0"
|
||||
register "desc" = ""Right Speaker Amp""
|
||||
register "name" = ""MAXR""
|
||||
device i2c 31 on
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/max98373
|
||||
register "vmon_slot_no" = "2"
|
||||
register "imon_slot_no" = "3"
|
||||
register "uid" = "1"
|
||||
register "desc" = ""Left Speaker Amp""
|
||||
register "name" = ""MAXL""
|
||||
device i2c 32 on
|
||||
end
|
||||
end
|
||||
end # I2C #0 0xA0E8
|
||||
device pci 15.1 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""GDIX0000""
|
||||
register "generic.desc" = ""Goodix Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
|
||||
register "generic.reset_delay_ms" = "120"
|
||||
register "generic.reset_off_delay_ms" = "3"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
|
||||
register "generic.enable_delay_ms" = "12"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 14 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN90FC""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
|
||||
register "generic.reset_delay_ms" = "20"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "generic.disable_gpio_export_in_crs" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 10 on end
|
||||
end
|
||||
end # I2C1 0xA0E9
|
||||
device pci 15.2 on
|
||||
chip drivers/i2c/sx9310
|
||||
register "desc" = ""SAR0 Proximity Sensor""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "0"
|
||||
register "reg_prox_ctrl0" = "0x10"
|
||||
register "reg_prox_ctrl1" = "0x00"
|
||||
register "reg_prox_ctrl2" = "0x84"
|
||||
register "reg_prox_ctrl3" = "0x0e"
|
||||
register "reg_prox_ctrl4" = "0x07"
|
||||
register "reg_prox_ctrl5" = "0xc6"
|
||||
register "reg_prox_ctrl6" = "0x20"
|
||||
register "reg_prox_ctrl7" = "0x0d"
|
||||
register "reg_prox_ctrl8" = "0x8d"
|
||||
register "reg_prox_ctrl9" = "0x43"
|
||||
register "reg_prox_ctrl10" = "0x1f"
|
||||
register "reg_prox_ctrl11" = "0x00"
|
||||
register "reg_prox_ctrl12" = "0x00"
|
||||
register "reg_prox_ctrl13" = "0x00"
|
||||
register "reg_prox_ctrl14" = "0x00"
|
||||
register "reg_prox_ctrl15" = "0x00"
|
||||
register "reg_prox_ctrl16" = "0x00"
|
||||
register "reg_prox_ctrl17" = "0x00"
|
||||
register "reg_prox_ctrl18" = "0x00"
|
||||
register "reg_prox_ctrl19" = "0x00"
|
||||
register "reg_sar_ctrl0" = "0x50"
|
||||
register "reg_sar_ctrl1" = "0x8a"
|
||||
register "reg_sar_ctrl2" = "0x3c"
|
||||
device i2c 28 on end
|
||||
end
|
||||
end # I2C2 0xA0EA
|
||||
device pci 19.1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
|
||||
register "wake" = "GPE0_DW2_15"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C5 0xA0C6
|
||||
end
|
||||
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue