GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

newconfig is no more. 

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Patrick Georgi 2010-02-07 21:43:48 +00:00
parent 389240f288
commit abf2ad716d
653 changed files with 15 additions and 64257 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

73
src/arch/i386/Config.lb
View File

@ -1,73 +0,0 @@
uses CONFIG_SMP
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_USE_INIT
uses CONFIG_HAVE_FAILOVER_BOOT
uses CONFIG_USE_FAILOVER_IMAGE
uses CONFIG_USE_FALLBACK_IMAGE
init init/crt0.S.lb
if CONFIG_USE_FAILOVER_IMAGE
else
initobject /src/lib/cbfs.o
initobject /src/lib/lzma.o
end
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
ldscript init/ldscript_failover.lb
else
ldscript init/ldscript_cbfs.lb
end
else
if CONFIG_USE_FALLBACK_IMAGE
ldscript init/ldscript_fallback_cbfs.lb
else
ldscript init/ldscript_cbfs.lb
end
end
makerule all
depends "coreboot.rom"
end
makerule floppy
depends "all"
action "mcopy -o coreboot.rom a:"
end
makerule nrv2b
depends "$(TOP)/util/nrv2b/nrv2b.c"
action "$(HOSTCC) -O2 -DENCODE -DDECODE -DMAIN -DVERBOSE -DNDEBUG -DBITSIZE=32 -DENDIAN=0 $< -o $@"
end
if CONFIG_USE_FAILOVER_IMAGE
makedefine COREBOOT_APC:=
makedefine COREBOOT_RAM_ROM:=
end
makerule crt0.S
depends "$(CONFIG_CRT0)"
action "cp $< $@"
end
addaction clean "rm -f romimage payload.*"
if CONFIG_USE_INIT
makerule init.o
depends "$(INIT-OBJECTS)"
action "$(LD) -melf_i386 -r -o init.pre.o $(INIT-OBJECTS)"
action "$(CONFIG_OBJCOPY) --rename-section .text=.init.text --rename-section .data=.init.data --rename-section .rodata=.init.rodata --rename-section .rodata.str1.1=.init.rodata.str1.1 init.pre.o init.o"
end
makerule coreboot
depends "crt0.o init.o $(COREBOOT_APC) $(COREBOOT_RAM_ROM) ldscript.ld"
action "$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o init.o"
action "$(CONFIG_CROSS_COMPILE)nm -n coreboot | sort > coreboot.map"
end
end
dir lib
dir boot
dir smp

22
src/arch/i386/boot/Config.lb
View File

@ -1,22 +0,0 @@
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_GENERATE_ACPI_TABLES
uses CONFIG_MULTIBOOT
uses CONFIG_HAVE_ACPI_RESUME
object boot.o
object coreboot_table.o
if CONFIG_MULTIBOOT
object multiboot.o
end
object tables.o
if CONFIG_GENERATE_PIRQ_TABLE
object pirq_routing.o
end
if CONFIG_GENERATE_ACPI_TABLES
object acpi.o
object acpigen.o
if CONFIG_HAVE_ACPI_RESUME
object wakeup.S
end
end
object gdt.o

18
src/arch/i386/lib/Config.lb
View File

@ -1,18 +0,0 @@
uses CONFIG_USE_INIT
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_USE_FAILOVER_IMAGE
object c_start.S
object cpu.c
object pci_ops_conf1.c
object pci_ops_conf2.c
object pci_ops_mmconf.c
object pci_ops_auto.c
object exception.c
initobject printk_init.o
if CONFIG_USE_FAILOVER_IMAGE
else
initobject cbfs_and_run.o
end

10
src/arch/i386/smp/Config.lb
View File

@ -1,10 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_IOAPIC
if CONFIG_GENERATE_MP_TABLE
object mpspec.o
end
if CONFIG_IOAPIC
object ioapic.o
end

2
src/boot/Config.lb
View File

@ -1,2 +0,0 @@
object hardwaremain.o
object selfboot.o

214
src/config/Config.lb
View File

@ -1,214 +0,0 @@
## This is Architecture independant part of the makefile
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_AP_CODE_IN_CAR
uses CONFIG_ASSEMBLER_DEBUG
makedefine CPP:= $(CC) -x assembler-with-cpp -DASSEMBLY -E
makedefine LIBGCC_FILE_NAME := $(shell $(CC) -print-libgcc-file-name)
makedefine GCC ?= $(CC)
makedefine GCC_INC_DIR := $(shell LC_ALL=C $(GCC) -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp")
makedefine CPPFLAGS := -I$(TOP)/src/include -I$(TOP)/src/arch/$(CONFIG_ARCH)/include -I$(GCC_INC_DIR) $(CPUFLAGS)
makedefine CFLAGS = $(CONFIG_CPU_OPT) $(DISTRO_CFLAGS) $(CPPFLAGS) -Os -nostdinc -nostdlib -Wall -Wundef -Wstrict-prototypes -Wmissing-prototypes -Wwrite-strings -Wredundant-decls -Wno-trigraphs -Werror-implicit-function-declaration -Wstrict-aliasing -Wshadow -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer -pipe
if CONFIG_ASSEMBLER_DEBUG
makedefine DEBUG_CFLAGS := -g -dA -fverbose-asm
end
makedefine HOSTCFLAGS:= -Os -Wall -Wstrict-prototypes -Wmissing-prototypes -Wredundant-decls -Wno-trigraphs -Werror-implicit-function-declaration -Wstrict-aliasing -Wshadow
makerule ldscript.ld
depends "ldoptions $(LDSUBSCRIPTS-1)"
action "echo 'INCLUDE ldoptions' > $@; for file in $(LDSUBSCRIPTS-1) ; do echo /\* $$file \*/ >> $@; cat $$file >> $@ ; done"
end
#makerule cpuflags
# depends "Makefile.settings"
# action "perl -e 'print \"CPUFLAGS :=\n\"; foreach $$var (split(\" \", $$ENV{VARIABLES})) { if (exists($$ENV{$$var})) { print \"CPUFLAGS += -D$$var\" . (length($$ENV{$$var})?\"=\x27$$ENV{$$var}\x27\":\"\") .\"\n\"} else { print \"CPUFLAGS += -U$$var\n\"} }' > $@"
#end
#makerule ldoptions
# depends "Makefile.settings"
# action "perl -e 'foreach $$var (split(\" \", $$ENV{VARIABLES})) { if ($$ENV{$$var} =~ m/^(0x[0-9a-fA-F]+|0[0-7]+|[0-9]+)$$/) { print \"$$var = $$ENV{$$var};\n\"; }}' > $@"
#end
makerule coreboot.rom
depends "coreboot"
action "$(CONFIG_OBJCOPY) -O binary coreboot coreboot.rom"
end
makerule coreboot.a
depends "$(OBJECTS)"
action "rm -f coreboot.a"
action "$(CONFIG_CROSS_COMPILE)ar cr coreboot.a $(OBJECTS)"
end
makerule coreboot_ram.o
depends "src/arch/$(CONFIG_ARCH)/lib/c_start.o $(DRIVER) coreboot.a $(LIBGCC_FILE_NAME)"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -r -o $@ src/arch/$(CONFIG_ARCH)/lib/c_start.o $(DRIVER) -Wl,--wrap,__divdi3 -Wl,--wrap,__udivdi3 -Wl,--wrap,__moddi3 -Wl,--wrap,__umoddi3 -Wl,-\( coreboot.a $(LIBGCC_FILE_NAME) -Wl,-\)"
end
makerule coreboot_ram
depends "coreboot_ram.o $(TOP)/src/config/coreboot_ram.ld ldoptions"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -nostartfiles -static -o $@ -T $(TOP)/src/config/coreboot_ram.ld coreboot_ram.o"
action "$(CONFIG_CROSS_COMPILE)nm -n coreboot_ram | sort > coreboot_ram.map"
end
##
## By default compress the part of coreboot that runs from RAM
##
makedefine COREBOOT_RAM-$(CONFIG_COMPRESS):=coreboot_ram.nrv2b
makedefine COREBOOT_RAM-$(CONFIG_UNCOMPRESSED):=coreboot_ram.bin
makerule coreboot_ram.bin
depends "coreboot_ram"
action "$(CONFIG_OBJCOPY) -O binary $< $@"
end
makerule coreboot_ram.nrv2b
depends "coreboot_ram.bin nrv2b"
action "./nrv2b e $< $@"
end
makerule coreboot_ram.rom
depends "$(COREBOOT_RAM-1)"
action "cp $(COREBOOT_RAM-1) coreboot_ram.rom"
end
makedefine COREBOOT_APC:=
if CONFIG_AP_CODE_IN_CAR
#for ap code in cache
makerule coreboot_apc.a
depends "apc_auto.o"
action "rm -f coreboot_apc.a"
action "$(CONFIG_CROSS_COMPILE)ar cr coreboot_apc.a apc_auto.o"
end
makerule coreboot_apc.o
depends "src/arch/$(CONFIG_ARCH)/lib/c_start.o coreboot_apc.a"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -r -o $@ $^"
end
makerule coreboot_apc
depends "coreboot_apc.o $(TOP)/src/config/coreboot_apc.ld ldoptions"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -nostartfiles -static -o $@ -T $(TOP)/src/config/coreboot_apc.ld coreboot_apc.o"
action "$(CONFIG_CROSS_COMPILE)nm -n coreboot_apc | sort > coreboot_apc.map"
end
##
## By default compress the part of coreboot that runs from cache as ram
##
makedefine COREBOOT_APC-$(CONFIG_COMPRESS):=coreboot_apc.nrv2b
makedefine COREBOOT_APC-$(CONFIG_UNCOMPRESSED):=coreboot_apc.bin
makerule coreboot_apc.bin
depends "coreboot_apc"
action "$(CONFIG_OBJCOPY) -O binary $< $@"
end
makerule coreboot_apc.nrv2b
depends "coreboot_apc.bin nrv2b"
action "./nrv2b e $< $@"
end
makerule coreboot_apc.rom
depends "$(COREBOOT_APC-1)"
action "cp $(COREBOOT_APC-1) coreboot_apc.rom"
end
makedefine COREBOOT_APC:=coreboot_apc.rom
end
makedefine COREBOOT_RAM_ROM:=coreboot_ram.rom
makerule coreboot
depends "crt0.o $(INIT-OBJECTS) $(COREBOOT_APC) $(COREBOOT_RAM_ROM) ldscript.ld"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld crt0.o $(INIT-OBJECTS)"
action "$(CONFIG_CROSS_COMPILE)nm -n coreboot | sort > coreboot.map"
action "$(CONFIG_CROSS_COMPILE)objdump -dS coreboot > coreboot.disasm"
end
# Force crt0.s (which has build time version code in it to rebuild every time)
makedefine .PHONY : crt0.s
makerule crt0.s
depends "crt0.S $(CRT0_INCLUDES)"
action "$(CPP) $(CPPFLAGS) -I. -I$(TOP)/src $< > $@.new && mv $@.new $@"
end
# generate an assembly listing via -a switch.
makerule crt0.o
depends "crt0.s"
action "$(CC) -Wa,-acdlns -c $(CONFIG_CPU_OPT) -o $@ $< >crt0.disasm"
end
makerule etags
depends "$(SOURCES)"
action "etags $(SOURCES)"
end
makerule tags
depends "$(SOURCES)"
action "ctags $(SOURCES)"
end
makerule corebootDoc.config
depends "$(TOP)/src/config/corebootDoc.config"
action "cat $(TOP)/src/config/corebootDoc.config > corebootDoc.config"
action "echo 'INPUT=$(SOURCES)' >> corebootDoc.config"
end
makerule documentation
depends "corebootDoc.config"
action "doxygen corebootDoc.config"
end
# Yes, the rule doesn't seem to make sense, but multiple images could try to
# create a romcc binary at the same time, clobbering each other.
# Our makefile architecture won't allow us to easily have the romcc target
# in the main makefile, so keep it here and move the race condition winner
# in place. That way, romcc may get compiled twice, but the binary will always
# be in a correct and valid state if it exists because the move is atomic.
makerule ../romcc
depends "$(TOP)/util/romcc/romcc.c"
action "$(HOSTCC) -g $(HOSTCFLAGS) $< -o romcc.tmpfile"
action "mv romcc.tmpfile $@"
end
makerule build_opt_tbl
depends "$(TOP)/util/options/build_opt_tbl.c $(TOP)/src/include/pc80/mc146818rtc.h $(TOP)/src/include/boot/coreboot_tables.h Makefile.settings Makefile"
action "$(HOSTCC) $(HOSTCFLAGS) $(CPUFLAGS) $< -o $@"
end
makerule option_table.h option_table.c
depends "build_opt_tbl $(CONFIG_MAINBOARD)/cmos.layout"
action "./build_opt_tbl --config $(CONFIG_MAINBOARD)/cmos.layout --header option_table.h --option option_table.c"
end
if CONFIG_HAVE_OPTION_TABLE
object ./option_table.o
end
makerule clean
action "rm -f $(OBJECTS)"
action "rm -f $(DRIVER)"
action "rm -f coreboot.* *~"
action "rm -f coreboot"
action "rm -f ldscript.ld"
action "rm -f a.out *.s *.l *.o *.E *.inc"
action "rm -f TAGS tags romcc*"
action "rm -f docipl chips.c *chip.c coreboot_apc* coreboot_ram* coreboot_pay*"
action "rm -f build_opt_tbl* nrv2b* option_table.c option_table.h crt0.S crt0.disasm"
action "rm -f smm smm.elf smm.map smm_bin.c"
action "rm -f dsdt.aml dsdt.c"
action "rm -f payload"
end
# do standard config files that the user need not specify
# for now, this is just 'lib', but it may be more later.
dir /lib
dir /console
dir /devices
dir /pc80
dir /boot

1122
src/config/Options.lb
View File

File diff suppressed because it is too large Load Diff

31
src/console/Config.lb
View File

@ -1,31 +0,0 @@
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_USBDEBUG_DIRECT
uses CONFIG_CONSOLE_VGA
uses CONFIG_CONSOLE_BTEXT
uses CONFIG_CONSOLE_LOGBUF
uses CONFIG_USE_INIT
uses CONFIG_USE_PRINTK_IN_CAR
object printk.o
if CONFIG_CONSOLE_SERIAL8250
driver uart8250_console.o
end
if CONFIG_USBDEBUG_DIRECT
driver usbdebug_direct_console.o
end
if CONFIG_CONSOLE_VGA
driver vga_console.o
end
if CONFIG_CONSOLE_BTEXT
driver btext_console.o
driver font-8x16.o
end
if CONFIG_CONSOLE_LOGBUF
driver logbuf_console.o
end
object console.o
object vtxprintf.o
object vsprintf.o
initobject vtxprintf.o

1
src/cpu/amd/dualcore/Config.lb
View File

@ -1 +0,0 @@
object amd_sibling.o

1
src/cpu/amd/microcode/Config.lb
View File

@ -1 +0,0 @@
object microcode.o

38
src/cpu/amd/model_10xxx/Config.lb
View File

@ -1,38 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2007 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_HAVE_MOVNTI
uses CONFIG_CPU_ADDR_BITS
default CONFIG_HAVE_INIT_TIMER=1
default CONFIG_HAVE_MOVNTI=1
default CONFIG_CPU_ADDR_BITS=48
dir /cpu/x86/tsc
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/pae
dir /cpu/x86/smm
dir /cpu/amd/mtrr
dir /cpu/amd/quadcore
dir /cpu/amd/microcode
driver model_10xxx_init.o
object update_microcode.o
object apic_timer.o
object processor_name.o

20
src/cpu/amd/model_fxx/Config.lb
View File

@ -1,20 +0,0 @@
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_HAVE_MOVNTI
uses CONFIG_CPU_ADDR_BITS
default CONFIG_HAVE_INIT_TIMER=1
default CONFIG_HAVE_MOVNTI=1
default CONFIG_CPU_ADDR_BITS=40
dir /cpu/x86/tsc
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/pae
dir /cpu/x86/smm
dir /cpu/amd/mtrr
dir /cpu/amd/dualcore
dir /cpu/amd/microcode
driver model_fxx_init.o
object apic_timer.o
object model_fxx_update_microcode.o
object processor_name.o
object powernow_acpi.o

5
src/cpu/amd/model_gx1/Config.lb
View File

@ -1,5 +0,0 @@
dir /cpu/x86/tsc
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
driver model_gx1_init.o

7
src/cpu/amd/model_gx2/Config.lb
View File

@ -1,7 +0,0 @@
dir /cpu/x86/tsc
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
driver model_gx2_init.o
object cpubug.o
object vsmsetup.o

7
src/cpu/amd/model_lx/Config.lb
View File

@ -1,7 +0,0 @@
dir /cpu/x86/tsc
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
driver model_lx_init.o
object cpubug.o
object vsmsetup.o

2
src/cpu/amd/mtrr/Config.lb
View File

@ -1,2 +0,0 @@
dir /cpu/x86/mtrr
object amd_mtrr.o

20
src/cpu/amd/quadcore/Config.lb
View File

@ -1,20 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2007 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
object amd_sibling.o

3
src/cpu/amd/sc520/Config.lb
View File

@ -1,3 +0,0 @@
config chip.h
object sc520.o

4
src/cpu/amd/socket_754/Config.lb
View File

@ -1,4 +0,0 @@
config chip.h
object socket_754.o
dir /cpu/amd/model_fxx

5
src/cpu/amd/socket_939/Config.lb
View File

@ -1,5 +0,0 @@
config chip.h
object socket_939.o
dir /cpu/amd/model_fxx

5
src/cpu/amd/socket_940/Config.lb
View File

@ -1,5 +0,0 @@
config chip.h
object socket_940.o
dir /cpu/amd/model_fxx

16
src/cpu/amd/socket_AM2/Config.lb
View File

@ -1,16 +0,0 @@
uses CONFIG_K8_REV_F_SUPPORT
uses CONFIG_K8_HT_FREQ_1G_SUPPORT
uses CONFIG_DIMM_SUPPORT
uses CONFIG_CPU_SOCKET_TYPE
config chip.h
default CONFIG_K8_REV_F_SUPPORT=1
#Opteron K8 1G HT Support
default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
default CONFIG_DIMM_SUPPORT=0x0004 #DDR2 unbuffered
default CONFIG_CPU_SOCKET_TYPE=0x11
object socket_AM2.o
dir /cpu/amd/model_fxx

51
src/cpu/amd/socket_AM2r2/Config.lb
View File

@ -1,51 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2007 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
uses CONFIG_PCI_IO_CFG_EXT
uses CONFIG_MMCONF_SUPPORT
uses CONFIG_HT3_SUPPORT
uses CONFIG_EXT_RT_TBL_SUPPORT
uses CONFIG_EXT_CONF_SUPPORT
uses CONFIG_DIMM_SUPPORT
uses CONFIG_CPU_SOCKET_TYPE
uses CONFIG_CBB
uses CONFIG_CDB
uses CONFIG_PCI_BUS_SEGN_BITS
config chip.h
default CONFIG_PCI_IO_CFG_EXT=1
default CONFIG_HT3_SUPPORT=1
default CONFIG_EXT_RT_TBL_SUPPORT=0
default CONFIG_EXT_CONF_SUPPORT=0
default CONFIG_DIMM_SUPPORT=0x0104 #DDR2 and REG
default CONFIG_CPU_SOCKET_TYPE=0x11
if CONFIG_EXT_RT_TBL_SUPPORT
default CONFIG_CBB=0xff
default CONFIG_CDB=0
end
#default CONFIG_MMCONF_SUPPORT=1
#default CONFIG_MMCONF_SUPPORT_DEFAULT=1
object socket_AM2r2.o
dir /cpu/amd/model_10xxx

16
src/cpu/amd/socket_F/Config.lb
View File

@ -1,16 +0,0 @@
uses CONFIG_K8_REV_F_SUPPORT
uses CONFIG_K8_HT_FREQ_1G_SUPPORT
uses CONFIG_DIMM_SUPPORT
uses CONFIG_CPU_SOCKET_TYPE
config chip.h
default CONFIG_K8_REV_F_SUPPORT=1
#Opteron K8 1G HT Support
default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
default CONFIG_DIMM_SUPPORT=0x0104 #DDR2 and REG
default CONFIG_CPU_SOCKET_TYPE=0x10
object socket_F.o
dir /cpu/amd/model_fxx

51
src/cpu/amd/socket_F_1207/Config.lb
View File

@ -1,51 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2007 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
uses CONFIG_PCI_IO_CFG_EXT
uses CONFIG_MMCONF_SUPPORT
uses CONFIG_HT3_SUPPORT
uses CONFIG_EXT_RT_TBL_SUPPORT
uses CONFIG_EXT_CONF_SUPPORT
uses CONFIG_DIMM_SUPPORT
uses CONFIG_CPU_SOCKET_TYPE
uses CONFIG_CBB
uses CONFIG_CDB
uses CONFIG_PCI_BUS_SEGN_BITS
config chip.h
default CONFIG_PCI_IO_CFG_EXT=1
default CONFIG_HT3_SUPPORT=1
default CONFIG_EXT_RT_TBL_SUPPORT=0
default CONFIG_EXT_CONF_SUPPORT=0
default CONFIG_DIMM_SUPPORT=0x0104 #DDR2 and REG
default CONFIG_CPU_SOCKET_TYPE=0x10
if CONFIG_EXT_RT_TBL_SUPPORT
default CONFIG_CBB=0xff
default CONFIG_CDB=0
end
#default CONFIG_MMCONF_SUPPORT=1
#default CONFIG_MMCONF_SUPPORT_DEFAULT=1
object socket_F_1207.o
dir /cpu/amd/model_10xxx

16
src/cpu/amd/socket_S1G1/Config.lb
View File

@ -1,16 +0,0 @@
uses CONFIG_K8_REV_F_SUPPORT
uses CONFIG_K8_HT_FREQ_1G_SUPPORT
uses CONFIG_DIMM_SUPPORT
uses CONFIG_CPU_SOCKET_TYPE
config chip.h
default CONFIG_K8_REV_F_SUPPORT=1
#Opteron K8 1G HT Support
default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
default CONFIG_DIMM_SUPPORT=0x0204 #DDR2 and REG, S1G1
default CONFIG_CPU_SOCKET_TYPE=0x12
object socket_S1G1.o
dir /cpu/amd/model_fxx

2
src/cpu/emulation/qemu-x86/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object northbridge.o

3
src/cpu/intel/bga956/Config.lb
View File

@ -1,3 +0,0 @@
config chip.h
object bga956.o
dir /cpu/intel/model_1067x

28
src/cpu/intel/ep80579/Config.lb
View File

@ -1,28 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Arastra, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License version 2 as
## published by the Free Software Foundation.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
config chip.h
object ep80579.o
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver ep80579_init.o

1
src/cpu/intel/hyperthreading/Config.lb
View File

@ -1 +0,0 @@
object intel_sibling.o

1
src/cpu/intel/microcode/Config.lb
View File

@ -1 +0,0 @@
object microcode.o

11
src/cpu/intel/model_1067x/Config.lb
View File

@ -1,11 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
driver model_1067x_init.o

31
src/cpu/intel/model_106cx/Config.lb
View File

@ -1,31 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2009 coresystems GmbH
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
dir /cpu/intel/speedstep
driver model_106cx_init.o

7
src/cpu/intel/model_69x/Config.lb
View File

@ -1,7 +0,0 @@
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_69x_init.o

7
src/cpu/intel/model_6dx/Config.lb
View File

@ -1,7 +0,0 @@
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_6dx_init.o

12
src/cpu/intel/model_6ex/Config.lb
View File

@ -1,12 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
dir /cpu/intel/speedstep
driver model_6ex_init.o

11
src/cpu/intel/model_6fx/Config.lb
View File

@ -1,11 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
driver model_6fx_init.o

7
src/cpu/intel/model_6xx/Config.lb
View File

@ -1,7 +0,0 @@
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_6xx_init.o

9
src/cpu/intel/model_f0x/Config.lb
View File

@ -1,9 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_f0x_init.o

9
src/cpu/intel/model_f1x/Config.lb
View File

@ -1,9 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_f1x_init.o

10
src/cpu/intel/model_f2x/Config.lb
View File

@ -1,10 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
driver model_f2x_init.o

10
src/cpu/intel/model_f3x/Config.lb
View File

@ -1,10 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
driver model_f3x_init.o

10
src/cpu/intel/model_f4x/Config.lb
View File

@ -1,10 +0,0 @@
uses CONFIG_HAVE_MOVNTI
default CONFIG_HAVE_MOVNTI=1
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
dir /cpu/intel/hyperthreading
driver model_f4x_init.o

3
src/cpu/intel/slot_2/Config.lb
View File

@ -1,3 +0,0 @@
config chip.h
object slot_2.o
dir /cpu/intel/model_6xx

22
src/cpu/intel/socket_441/Config.lb
View File

@ -1,22 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2009 coresystems GmbH
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
config chip.h
object socket_441.o
dir /cpu/intel/model_106cx

3
src/cpu/intel/socket_PGA370/Config.lb
View File

@ -1,3 +0,0 @@
config chip.h
object socket_PGA370.o
dir /cpu/intel/model_6xx

6
src/cpu/intel/socket_mFCPGA478/Config.lb
View File

@ -1,6 +0,0 @@
config chip.h
object socket_mFCPGA478.o
dir /cpu/intel/model_69x
dir /cpu/intel/model_6dx
dir /cpu/intel/model_6ex
dir /cpu/intel/model_6fx

4
src/cpu/intel/socket_mPGA478/Config.lb
View File

@ -1,4 +0,0 @@
config chip.h
object socket_mPGA478.o
dir /cpu/intel/model_69x
dir /cpu/intel/model_6dx

4
src/cpu/intel/socket_mPGA479M/Config.lb
View File

@ -1,4 +0,0 @@
config chip.h
object socket_mPGA479M.o
dir /cpu/intel/model_69x
dir /cpu/intel/model_6dx

6
src/cpu/intel/socket_mPGA603/Config.lb
View File

@ -1,6 +0,0 @@
config chip.h
object socket_mPGA603_400Mhz.o
dir /cpu/intel/model_f0x
dir /cpu/intel/model_f1x
dir /cpu/intel/model_f2x

5
src/cpu/intel/socket_mPGA604/Config.lb
View File

@ -1,5 +0,0 @@
config chip.h
object socket_mPGA604.o
dir /cpu/intel/model_f2x
dir /cpu/intel/model_f3x
dir /cpu/intel/model_f4x

1
src/cpu/intel/speedstep/Config.lb
View File

@ -1 +0,0 @@
object acpi.o

28
src/cpu/via/model_c3/Config.lb
View File

@ -1,28 +0,0 @@
#
# This file is part of the coreboot project.
#
# (C) 2007-2008 coresystems GmbH
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
# MA 02110-1301 USA
#
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_c3_init.o

28
src/cpu/via/model_c7/Config.lb
View File

@ -1,28 +0,0 @@
#
# This file is part of the coreboot project.
#
# (C) 2007-2008 coresystems GmbH
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; version 2 of
# the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
# MA 02110-1301 USA
#
dir /cpu/x86/tsc
dir /cpu/x86/mtrr
dir /cpu/x86/lapic
dir /cpu/x86/cache
dir /cpu/x86/smm
dir /cpu/intel/microcode
driver model_c7_init.o

1
src/cpu/x86/cache/Config.lb vendored
View File

@ -1 +0,0 @@
object cache.o

11
src/cpu/x86/lapic/Config.lb
View File

@ -1,11 +0,0 @@
uses CONFIG_UDELAY_LAPIC
object lapic.o
object lapic_cpu_init.o
object secondary.S
if CONFIG_UDELAY_LAPIC
default CONFIG_HAVE_INIT_TIMER=1
object apic_timer.o
end

1
src/cpu/x86/mtrr/Config.lb
View File

@ -1 +0,0 @@
object mtrr.o

1
src/cpu/x86/pae/Config.lb
View File

@ -1 +0,0 @@
object pgtbl.o

48
src/cpu/x86/smm/Config.lb
View File

@ -1,48 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 coresystems GmbH
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses CONFIG_HAVE_SMI_HANDLER
if CONFIG_HAVE_SMI_HANDLER
object smmrelocate.S
smmobject smmhandler.S
smmobject smihandler.o
smmobject smiutil.o
makerule smm.o
depends "$(SMM-OBJECTS) src/console/printk.o src/console/vtxprintf.o $(LIBGCC_FILE_NAME)"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -r -o $@ $^"
end
makerule smm
depends "smm.o $(TOP)/src/cpu/x86/smm/smm.ld ldoptions"
action "$(CC) $(DISTRO_LFLAGS) -nostdlib -nostartfiles -static -o smm.elf -T $(TOP)/src/cpu/x86/smm/smm.ld smm.o"
action "$(CONFIG_CROSS_COMPILE)nm -n smm.elf | sort > smm.map"
action "$(CONFIG_OBJCOPY) -O binary smm.elf smm"
end
makerule smm_bin.c
depends "smm"
action "(echo 'unsigned char smm[] = {'; od -vtx1 smm | sed -e 's,^[0-9]* *,,' -e 's:[0-9a-f][0-9a-f] :0x&,:g' -e 's:[0-9a-f][0-9a-f]$$:0x&,:'; echo '}; unsigned int smm_len = '; wc -c smm |awk '{print $$1;}' ; echo ';') > smm_bin.c"
end
object ./smm_bin.o
end

9
src/cpu/x86/tsc/Config.lb
View File

@ -1,9 +0,0 @@
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_HAVE_INIT_TIMER
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=0
if CONFIG_UDELAY_TSC
default CONFIG_HAVE_INIT_TIMER=1
object delay_tsc.o
end

25
src/devices/Config.lb
View File

@ -1,25 +0,0 @@
uses CONFIG_PCI_ROM_RUN
uses CONFIG_VGA_ROM_RUN
object device.o
object root_device.o
object device_util.o
object pci_device.o
object hypertransport.o
object pcix_device.o
object pciexp_device.o
object agp_device.o
object cardbus_device.o
object pnp_device.o
object pci_ops.o
object smbus_ops.o
if CONFIG_PCI_ROM_RUN
object pci_rom.o
dir ../../util/x86emu
else
if CONFIG_VGA_ROM_RUN
object pci_rom.o
dir ../../util/x86emu
end
end

1
src/drivers/ati/ragexl/Config.lb
View File

@ -1 +0,0 @@
driver xlinit.o

1
src/drivers/emulation/qemu/Config.lb
View File

@ -1 +0,0 @@
driver init.o

2
src/drivers/generic/debug/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object debug_dev.o

0
src/drivers/generic/generic/Config.lb
View File

2
src/drivers/i2c/adm1026/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object adm1026.o

2
src/drivers/i2c/adm1027/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object adm1027.o

2
src/drivers/i2c/i2cmux/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object i2cmux.o

2
src/drivers/i2c/i2cmux2/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object i2cmux2.o

2
src/drivers/i2c/lm63/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
object lm63.o

1
src/drivers/si/3114/Config.lb
View File

@ -1 +0,0 @@
driver si_sata.o

1
src/drivers/trident/blade3d/Config.lb
View File

@ -1 +0,0 @@
driver blade3d.o

33
src/lib/Config.lb
View File

@ -1,33 +0,0 @@
uses CONFIG_USE_INIT
uses CONFIG_USBDEBUG_DIRECT
object clog2.o
object uart8250.o
if CONFIG_USBDEBUG_DIRECT
object usbdebug_direct.o
end
object memset.o
object memcpy.o
object memcmp.o
object memmove.o
object malloc.o
object delay.o
object fallback_boot.o
object compute_ip_checksum.o
object version.o
object gcc.o
object cbfs.o
object lzma.o
object cbmem.o
# Force version.o to recompile every time
makedefine .PHONY : version.o
initobject uart8250.o
initobject memset.o
initobject memcpy.o
initobject memcmp.o

132
src/mainboard/a-trend/atc-6220/Config.lb
View File

@ -1,132 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 128 * 1024
include /config/nofailovercalculation.lb
default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
arch i386 end
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
makerule ./failover.E
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/mmx_disable.inc
dir /pc80
config chip.h
chip northbridge/intel/i440bx # Northbridge
device apic_cluster 0 on # APIC cluster
chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
device apic 0 on end # APIC
end
end
device pci_domain 0 on # PCI domain
device pci 0.0 on end # Host bridge
device pci 1.0 on end # PCI/AGP bridge
chip southbridge/intel/i82371eb # Southbridge
device pci 7.0 on # ISA bridge
chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
device pnp 3f0.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 3f0.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 3f0.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 3f0.3 on # COM2 / IR
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 3f0.5 on # PS/2 keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1 # PS/2 keyboard interrupt
irq 0x72 = 12 # PS/2 mouse interrupt
end
device pnp 3f0.6 on # Consumer IR
end
device pnp 3f0.7 on # GPIO 1
end
device pnp 3f0.8 on # GPIO 2
end
device pnp 3f0.a on # ACPI
end
end
end
device pci 7.1 on end # IDE
device pci 7.2 on end # USB
device pci 7.3 on end # ACPI
register "ide0_enable" = "1"
register "ide1_enable" = "1"
register "ide_legacy_enable" = "1"
# Enable UDMA/33 for higher speed if your IDE device(s) support it.
register "ide0_drive0_udma33_enable" = "0"
register "ide0_drive1_udma33_enable" = "0"
register "ide1_drive0_udma33_enable" = "0"
register "ide1_drive1_udma33_enable" = "0"
end
end
end

97
src/mainboard/a-trend/atc-6220/Options.lb
View File

@ -1,97 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
default CONFIG_ROM_SIZE = 256 * 1024
default CONFIG_HAVE_FALLBACK_BOOT = 1
default CONFIG_GENERATE_MP_TABLE = 0
default CONFIG_HAVE_HARD_RESET = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default CONFIG_GENERATE_PIRQ_TABLE = 1
default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
default CONFIG_STACK_SIZE = 8 * 1024
default CONFIG_HEAP_SIZE = 16 * 1024
default CONFIG_HAVE_OPTION_TABLE = 0
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_TTYS0_BAUD = 115200
default CONFIG_TTYS0_BASE = 0x3f8
default CONFIG_TTYS0_LCS = 0x3 # 8n1
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
default CONFIG_CONSOLE_VGA = 1
default CONFIG_PCI_ROM_RUN = 1
end

142
src/mainboard/a-trend/atc-6240/Config.lb
View File

@ -1,142 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 128 * 1024
include /config/nofailovercalculation.lb
default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
arch i386 end
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
makerule ./failover.E
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/mmx_disable.inc
dir /pc80
config chip.h
chip northbridge/intel/i440bx # Northbridge
device apic_cluster 0 on # APIC cluster
chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
device apic 0 on end # APIC
end
end
device pci_domain 0 on # PCI domain
device pci 0.0 on end # Host bridge
device pci 1.0 on end # PCI/AGP bridge
chip southbridge/intel/i82371eb # Southbridge
device pci 7.0 on # ISA bridge
chip superio/winbond/w83627hf # Super I/O
device pnp 3f0.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 3f0.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
end
device pnp 3f0.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 3f0.3 on # COM2 / IR
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 3f0.5 on # PS/2 keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1 # PS/2 keyboard interrupt
irq 0x72 = 12 # PS/2 mouse interrupt
end
device pnp 3f0.6 on # Consumer IR
io 0x60 = 0x00
end
device pnp 3f0.7 on # Game port / MIDI / GPIO 1
io 0x60 = 0x201
io 0x62 = 0x330
irq 0x70 = 9
end
device pnp 3f0.8 off # GPIO 2 / WDT
end
device pnp 3f0.9 off # GPIO 3
end
device pnp 3f0.a off # ACPI
end
device pnp 3f0.b off # HWM (TODO)
end
end
end
device pci 7.1 on end # IDE
device pci 7.2 on end # USB
device pci 7.3 on end # ACPI
device pci c.0 on end # Onboard audio (ES1371)
register "ide0_enable" = "1"
register "ide1_enable" = "1"
register "ide_legacy_enable" = "1"
# Enable UDMA/33 for higher speed if your IDE device(s) support it.
register "ide0_drive0_udma33_enable" = "0"
register "ide0_drive1_udma33_enable" = "0"
register "ide1_drive0_udma33_enable" = "0"
register "ide1_drive1_udma33_enable" = "0"
end
end
end

97
src/mainboard/a-trend/atc-6240/Options.lb
View File

@ -1,97 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
default CONFIG_ROM_SIZE = 256 * 1024
default CONFIG_HAVE_FALLBACK_BOOT = 1
default CONFIG_GENERATE_MP_TABLE = 0
default CONFIG_HAVE_HARD_RESET = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default CONFIG_GENERATE_PIRQ_TABLE = 1
default CONFIG_IRQ_SLOT_COUNT = 7 # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
default CONFIG_STACK_SIZE = 8 * 1024
default CONFIG_HEAP_SIZE = 16 * 1024
default CONFIG_HAVE_OPTION_TABLE = 0
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_TTYS0_BAUD = 115200
default CONFIG_TTYS0_BASE = 0x3f8
default CONFIG_TTYS0_LCS = 0x3 # 8n1
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
default CONFIG_CONSOLE_VGA = 1
default CONFIG_PCI_ROM_RUN = 1
end

132
src/mainboard/abit/be6-ii_v2_0/Config.lb
View File

@ -1,132 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 128 * 1024
include /config/nofailovercalculation.lb
default CONFIG_XIP_ROM_BASE = 0xffffffff - CONFIG_XIP_ROM_SIZE + 1
arch i386 end
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
makerule ./failover.E
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -E -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -O2 -mcpu=p2 --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -E -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -O2 -mcpu=p2 -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit ./auto.inc
mainboardinit cpu/x86/mmx_disable.inc
dir /pc80
config chip.h
chip northbridge/intel/i440bx # Northbridge
device apic_cluster 0 on # APIC cluster
chip cpu/intel/slot_2 # CPU (FIXME: It's slot 1, actually)
device apic 0 on end # APIC
end
end
device pci_domain 0 on # PCI domain
device pci 0.0 on end # Host bridge
device pci 1.0 on end # PCI/AGP bridge
chip southbridge/intel/i82371eb # Southbridge
device pci 7.0 on # ISA bridge
chip superio/winbond/w83977tf # Super I/O (FIXME: It's W83977EF!)
device pnp 3f0.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 3f0.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 3f0.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 3f0.3 on # COM2 / IR
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 3f0.5 on # PS/2 keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1 # PS/2 keyboard interrupt
irq 0x72 = 12 # PS/2 mouse interrupt
end
device pnp 3f0.6 on # Consumer IR
end
device pnp 3f0.7 on # GPIO 1
end
device pnp 3f0.8 on # GPIO 2
end
device pnp 3f0.a on # ACPI
end
end
end
device pci 7.1 on end # IDE, UDMA/33 (part of 82371EB)
device pci 7.2 on end # USB
device pci 7.3 on end # ACPI
device pci 13.0 on end # IDE, UDMA/66 (HPT366 controller)
register "ide0_enable" = "1"
register "ide1_enable" = "1"
register "ide_legacy_enable" = "1"
register "ide0_drive0_udma33_enable" = "1"
register "ide0_drive1_udma33_enable" = "1"
register "ide1_drive0_udma33_enable" = "1"
register "ide1_drive1_udma33_enable" = "1"
end
end
end

98
src/mainboard/abit/be6-ii_v2_0/Options.lb
View File

@ -1,98 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
default CONFIG_ROM_SIZE = 256 * 1024 # Override this in targets/*/Config.lb.
default CONFIG_HAVE_FALLBACK_BOOT = 1
default CONFIG_GENERATE_MP_TABLE = 0
default CONFIG_HAVE_HARD_RESET = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default CONFIG_GENERATE_PIRQ_TABLE = 1
default CONFIG_IRQ_SLOT_COUNT = 9 # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_ROM_IMAGE_SIZE = 36 * 1024
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
default CONFIG_STACK_SIZE = 8 * 1024
default CONFIG_HEAP_SIZE = 16 * 1024
default CONFIG_HAVE_OPTION_TABLE = 0
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC = "gcc"
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_TTYS0_BAUD = 115200
default CONFIG_TTYS0_BASE = 0x3f8
default CONFIG_TTYS0_LCS = 0x3 # 8n1
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9 # Override this in targets/*/Config.lb.
default CONFIG_CONSOLE_VGA = 1 # Override this in targets/*/Config.lb.
default CONFIG_PCI_ROM_RUN = 1 # Override this in targets/*/Config.lb.
end

129
src/mainboard/advantech/pcm-5820/Config.lb
View File

@ -1,129 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
arch i386 end
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
makerule ./failover.E
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
# depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
depends "$(CONFIG_MAINBOARD)/auto.c ../romcc"
action "../romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
mainboardinit arch/i386/lib/cpu_reset.inc
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit cpu/amd/model_gx1/cpu_setup.inc
mainboardinit cpu/amd/model_gx1/gx_setup.inc
mainboardinit ./auto.inc
dir /pc80
config chip.h
chip northbridge/amd/gx1 # Northbridge
device pci_domain 0 on # PCI domain
device pci 0.0 on end # Host bridge
chip southbridge/amd/cs5530 # Southbridge
device pci 12.0 on # ISA bridge
chip superio/winbond/w83977f # SUper I/O
device pnp 3f0.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 3f0.1 on # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 3f0.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 3f0.3 on # COM2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 3f0.4 on # RTC / On-Now control
io 0x60 = 0x70
irq 0x70 = 8
end
device pnp 3f0.5 on # PS/2 keyboard / mouse
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1 # PS/2 keyboard interrupt
irq 0x72 = 12 # PS/2 mouse interrupt
end
device pnp 3f0.6 on # IR
# TODO?
end
device pnp 3f0.7 on # GPIO 1
# TODO?
end
device pnp 3f0.8 on # GPIO 2
# TODO?
end
end
end
device pci 12.1 on end # SMI
device pci 12.2 on end # IDE
device pci 12.3 on end # Audio (onboard)
device pci 12.4 on end # VGA
device pci 13.0 on end # USB
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
end
chip cpu/amd/model_gx1 # CPU
end
end

103
src/mainboard/advantech/pcm-5820/Options.lb
View File

@ -1,103 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_VIDEO_MB
uses CONFIG_SPLASH_GRAPHIC
uses CONFIG_GX1_VIDEO
uses CONFIG_GX1_VIDEOMODE
uses CONFIG_PIRQ_ROUTE
## Enable VGA with a splash screen (only 640x480 to run on most monitors).
## We want to support up to 1024x768@16 so we need 2MiB video memory.
## Note: Higher resolutions might need faster SDRAM speed.
default CONFIG_GX1_VIDEO = 1
default CONFIG_GX1_VIDEOMODE = 0
default CONFIG_SPLASH_GRAPHIC = 1
default CONFIG_VIDEO_MB = 2
default CONFIG_ROM_SIZE = 256 * 1024
default CONFIG_GENERATE_PIRQ_TABLE = 1
default CONFIG_IRQ_SLOT_COUNT = 2 # Override this in targets/*/Config.lb.
default CONFIG_PIRQ_ROUTE = 1
default CONFIG_HAVE_FALLBACK_BOOT = 1
default CONFIG_GENERATE_MP_TABLE = 0
default CONFIG_HAVE_HARD_RESET = 0
default CONFIG_UDELAY_TSC = 1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
default CONFIG_HAVE_OPTION_TABLE = 0
default CONFIG_MAINBOARD_VENDOR = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_MAINBOARD_PART_NUMBER = "N/A" # Override this in targets/*/Config.lb.
default CONFIG_ROM_IMAGE_SIZE = 64 * 1024
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
default CONFIG_STACK_SIZE = 8 * 1024
default CONFIG_HEAP_SIZE = 16 * 1024
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = ""
default CC = "$(CONFIG_CROSS_COMPILE)gcc "
default HOSTCC = "gcc"
default CONFIG_CONSOLE_SERIAL8250 = 1
default CONFIG_TTYS0_BAUD = 115200
default CONFIG_TTYS0_BASE = 0x3f8
default CONFIG_TTYS0_LCS = 0x3 # 8n1
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 9
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 9
end

152
src/mainboard/amd/db800/Config.lb
View File

@ -1,152 +0,0 @@
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
##
## Set all of the defaults for an x86 architecture
##
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
### Should this be in the northbridge code?
#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
# mainboardinit ./failover.inc
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
##
## Include the secondary Configuration files
##
dir /pc80
config chip.h
chip northbridge/amd/lx
device pci_domain 0 on
device pci 1.0 on end # Northbridge
device pci 1.1 on end # Graphics
chip southbridge/amd/cs5536
# IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
# SIRQ Mode = Active(Quiet) mode. Save power....
# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse, UARTs, etc IRQs. OK
register "lpc_serirq_enable" = "0x0000105a"
register "lpc_serirq_polarity" = "0x0000EFA5"
register "lpc_serirq_mode" = "1"
register "enable_gpio_int_route" = "0x0D0C0700"
register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
register "enable_USBP4_device" = "1" # 0: host, 1:device
register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
register "com1_enable" = "0"
register "com1_address" = "0x3F8"
register "com1_irq" = "4"
register "com2_enable" = "0"
register "com2_address" = "0x2F8"
register "com2_irq" = "3"
register "unwanted_vpci[0]" = "0" # End of list has a zero
device pci d.0 on end # Ethernet
device pci e.0 on end # Slot1
device pci f.0 on # ISA Bridge
chip superio/winbond/w83627hf
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off end # Com2
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR
device pnp 2e.7 off end # GAME_MIDI_GIPO1
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b off end # HW Monitor
end
end
device pci f.2 on end # IDE Controller
device pci f.3 on end # Audio
device pci f.4 on end # OHCI
device pci f.5 on end # EHCI
end
end
# APIC cluster is late CPU init.
device apic_cluster 0 on
chip cpu/amd/model_lx
device apic 0 on end
end
end
end

180
src/mainboard/amd/db800/Options.lb
View File

@ -1,180 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_VIDEO_MB
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_PIRQ_ROUTE
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
default CONFIG_ROM_SIZE = 256*1024
###
### Build options
###
default CONFIG_CONSOLE_VGA=0
default CONFIG_VIDEO_MB=8
default CONFIG_PCI_ROM_RUN=0
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default CONFIG_GENERATE_MP_TABLE=0
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=0
## Delay timer options
##
default CONFIG_UDELAY_TSC=1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=4
default CONFIG_PIRQ_ROUTE=1
#object irq_tables.o
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=0
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 32768
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc8000
default CONFIG_DCACHE_RAM_SIZE=0x08000
default CONFIG_USE_PRINTK_IN_CAR=1
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
default CONFIG_CROSS_COMPILE=""
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
end

258
src/mainboard/amd/dbm690t/Config.lb
View File

@ -1,258 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
##
##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
#dir /drivers/si/3114
if CONFIG_GENERATE_MP_TABLE object mptable.o end
if CONFIG_GENERATE_PIRQ_TABLE
object get_bus_conf.o
object irq_tables.o
end
if CONFIG_GENERATE_ACPI_TABLES
object acpi_tables.o
object fadt.o
makerule dsdt.c
depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
action "mv dsdt.hex dsdt.c"
end
object ./dsdt.o
end
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
##
## Include the secondary Configuration files
##
config chip.h
#The variables belong to mainboard are defined here.
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
#Define gfx_compliance, 0: didn't support compliance, 1: support
#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_S1G1
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on # southbridge
chip southbridge/amd/rs690
device pci 0.0 on end # HT 0x7910
device pci 1.0 on # Internal Graphics P2P bridge 0x7912
device pci 5.0 on end # Internal Graphics 0x791F
end
device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
device pci 3.0 off end # PCIE P2P bridge 0x791b
device pci 4.0 on end # PCIE P2P bridge 0x7914
device pci 5.0 on end # PCIE P2P bridge 0x7915
device pci 6.0 on end # PCIE P2P bridge 0x7916
device pci 7.0 on end # PCIE P2P bridge 0x7917
device pci 8.0 off end # NB/SB Link P2P bridge
register "gpp_configuration" = "4"
register "port_enable" = "0xfc"
register "gfx_dev2_dev3" = "1"
register "gfx_dual_slot" = "0"
register "gfx_lane_reversal" = "0"
register "gfx_tmds" = "0"
register "gfx_compliance" = "0"
register "gfx_reconfiguration" = "1"
register "gfx_link_width" = "0"
end
chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
device pci 12.0 on end # SATA 0x4380
device pci 13.0 on end # USB 0x4387
device pci 13.1 on end # USB 0x4388
device pci 13.2 on end # USB 0x4389
device pci 13.3 on end # USB 0x438a
device pci 13.4 on end # USB 0x438b
device pci 13.5 on end # USB 2 0x4386
device pci 14.0 on # SM 0x4385
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
end # SM
device pci 14.1 on end # IDE 0x438c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x438d
chip superio/ite/it8712f
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.2 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.3 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.4 off end # EC
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end
device pnp 2e.6 on # Mouse
irq 0x70 = 12
end
device pnp 2e.7 off # GPIO, must be closed for unresolved reason.
end
device pnp 2e.8 off # MIDI
io 0x60 = 0x300
irq 0x70 = 9
end
device pnp 2e.9 off # GAME
io 0x60 = 0x220
end
device pnp 2e.a off end # CIR
end #superio/ite/it8712f
end #LPC
device pci 14.4 on end # PCI 0x4384
device pci 14.5 on end # ACI 0x4382
device pci 14.6 on end # MCI 0x438e
register "ide0_enable" = "1"
register "sata0_enable" = "1"
register "hda_viddid" = "0x10ec0882"
end #southbridge/amd/sb600
end # device pci 18.0
device pci 18.0 on end
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #northbridge/amd/amdk8
end #pci_domain
end #northbridge/amd/amdk8/root_complex

301
src/mainboard/amd/dbm690t/Options.lb
View File

@ -1,301 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
##
##
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_GENERATE_ACPI_TABLES
uses CONFIG_HAVE_ACPI_RESUME
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses CONFIG_FALLBACK_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_ROMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_LB_CKS_RANGE_START
uses CONFIG_LB_CKS_RANGE_END
uses CONFIG_LB_CKS_LOC
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses CONFIG_RAMBASE
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_GDB_STUB
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_VGA_ROM_RUN
uses CONFIG_HW_MEM_HOLE_SIZEK
uses CONFIG_HT_CHAIN_UNITID_BASE
uses CONFIG_HT_CHAIN_END_UNITID_BASE
uses CONFIG_SB_HT_CHAIN_ON_BUS0
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_VIDEO_MB
uses CONFIG_GFXUMA
uses CONFIG_HAVE_MAINBOARD_RESOURCES
###
### Build options
###
##
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
default CONFIG_ROM_SIZE=524288
##
## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default CONFIG_GENERATE_MP_TABLE=1
## ACPI tables will be included
default CONFIG_GENERATE_ACPI_TABLES=1
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=0
##
## Move the default coreboot cmos range off of AMD RTC registers
##
default CONFIG_LB_CKS_RANGE_START=49
default CONFIG_LB_CKS_RANGE_END=122
default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_PHYSICAL_CPUS=1
default CONFIG_LOGICAL_CPUS=1
#1G memory hole
default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
default CONFIG_VGA_ROM_RUN=1
# BTDC: Only one HT device on Herring.
#HT Unit ID offset
#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
default CONFIG_HT_CHAIN_UNITID_BASE=0x0
#real SB Unit ID
default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
#make the SB HT chain on bus 0
default CONFIG_SB_HT_CHAIN_ON_BUS0=1
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc8000
default CONFIG_DCACHE_RAM_SIZE=0x8000
default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default CONFIG_MAINBOARD_PART_NUMBER="dbm690t"
default CONFIG_MAINBOARD_VENDOR="amd"
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
##
## coreboot C code runs at this location in RAM
##
default CONFIG_RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
default CONFIG_USE_PRINTK_IN_CAR=1
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
default CONFIG_VIDEO_MB=1
default CONFIG_GFXUMA=1
default CONFIG_HAVE_MAINBOARD_RESOURCES=1
### End Options.lb
end

125
src/mainboard/amd/norwich/Config.lb
View File

@ -1,125 +0,0 @@
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
##
## Set all of the defaults for an x86 architecture
##
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
### Should this be in the northbridge code?
#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
# mainboardinit ./failover.inc
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
##
## Include the secondary Configuration files
##
dir /pc80
config chip.h
chip northbridge/amd/lx
device pci_domain 0 on
device pci 1.0 on end # Northbridge
device pci 1.1 on end # Graphics
chip southbridge/amd/cs5536
# IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
# SIRQ Mode = Active(Quiet) mode. Save power....
# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
register "lpc_serirq_enable" = "0x00001002"
register "lpc_serirq_polarity" = "0x0000EFFD"
register "lpc_serirq_mode" = "1"
register "enable_gpio_int_route" = "0x0D0C0700"
register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
register "enable_USBP4_device" = "0" #0: host, 1:device
register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
register "com1_enable" = "1"
register "com1_address" = "0x3F8"
register "com1_irq" = "4"
register "com2_enable" = "0"
register "com2_address" = "0x2F8"
register "com2_irq" = "3"
register "unwanted_vpci[0]" = "0" # End of list has a zero
device pci b.0 on end # Slot 3
device pci c.0 on end # Slot 4
device pci d.0 on end # Slot 1
device pci e.0 on end # Slot 2
device pci f.0 on end # ISA Bridge
device pci f.2 on end # IDE Controller
device pci f.3 on end # Audio
device pci f.4 on end # OHCI
device pci f.5 on end # EHCI
end
end
# APIC cluster is late CPU init.
device apic_cluster 0 on
chip cpu/amd/model_lx
device apic 0 on end
end
end
end

180
src/mainboard/amd/norwich/Options.lb
View File

@ -1,180 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_VIDEO_MB
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_PIRQ_ROUTE
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
default CONFIG_ROM_SIZE = 256*1024
###
### Build options
###
default CONFIG_CONSOLE_VGA=0
default CONFIG_VIDEO_MB=8
default CONFIG_PCI_ROM_RUN=0
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default CONFIG_GENERATE_MP_TABLE=0
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=0
## Delay timer options
##
default CONFIG_UDELAY_TSC=1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=6
default CONFIG_PIRQ_ROUTE=1
#object irq_tables.o
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=0
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc8000
default CONFIG_DCACHE_RAM_SIZE=0x08000
default CONFIG_USE_PRINTK_IN_CAR=1
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
default CONFIG_CROSS_COMPILE=""
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
end

218
src/mainboard/amd/pistachio/Config.lb
View File

@ -1,218 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
##
##
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
#dir /drivers/si/3114
if CONFIG_GENERATE_MP_TABLE object mptable.o end
if CONFIG_GENERATE_PIRQ_TABLE
object get_bus_conf.o
object irq_tables.o
end
if CONFIG_GENERATE_ACPI_TABLES
object acpi_tables.o
object fadt.o
makerule dsdt.c
depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
action "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
action "mv dsdt.hex dsdt.c"
end
object ./dsdt.o
end
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
##
## Include the secondary Configuration files
##
config chip.h
#The variables belong to mainboard are defined here.
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
#Define gfx_compliance, 0: didn't support compliance, 1: support
#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_AM2
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on # southbridge, K8 HT Configuration
chip southbridge/amd/rs690
device pci 0.0 on end # HT 0x7910
# device pci 0.1 off end # CLK
device pci 1.0 on # Internal Graphics P2P bridge 0x7912
device pci 5.0 on end # Internal Graphics 0x791F
end
device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
device pci 3.0 off end # PCIE P2P bridge 0x791b
device pci 4.0 on end # PCIE P2P bridge 0x7914
device pci 5.0 on end # PCIE P2P bridge 0x7915
device pci 6.0 on end # PCIE P2P bridge 0x7916
device pci 7.0 on end # PCIE P2P bridge 0x7917
device pci 8.0 off end # NB/SB Link P2P bridge
register "gpp_configuration" = "4"
register "port_enable" = "0xfc"
register "gfx_dev2_dev3" = "1"
register "gfx_dual_slot" = "0"
register "gfx_lane_reversal" = "0"
register "gfx_tmds" = "0"
register "gfx_compliance" = "0"
register "gfx_reconfiguration" = "1"
register "gfx_link_width" = "0"
end
chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
device pci 12.0 on end # SATA 0x4380
device pci 13.0 on end # USB 0x4387
device pci 13.1 on end # USB 0x4388
device pci 13.2 on end # USB 0x4389
device pci 13.3 on end # USB 0x438a
device pci 13.4 on end # USB 0x438b
device pci 13.5 on end # USB 2 0x4386
device pci 14.0 on # SM 0x4385
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 off end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 off end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 off end
end
end # SM
device pci 14.1 on end # IDE 0x438c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on end # LPC 0x438d
device pci 14.4 on end # PCI 0x4384
device pci 14.5 on end # ACI 0x4382
device pci 14.6 on end # MCI 0x438e
register "ide0_enable" = "1"
register "sata0_enable" = "1"
register "hda_viddid" = "0x10ec0882"
end #southbridge/amd/sb600
end # device pci 18.0
device pci 18.1 on end # K8 Address Map
device pci 18.2 on end # K8 DRAM Controller and HT Trace Mode
device pci 18.3 on end # K8 Miscellaneous Control
end #northbridge/amd/amdk8
end #pci_domain
end #northbridge/amd/amdk8/root_complex

301
src/mainboard/amd/pistachio/Options.lb
View File

@ -1,301 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2008 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
##
##
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_GENERATE_ACPI_TABLES
uses CONFIG_HAVE_ACPI_RESUME
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses CONFIG_FALLBACK_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_ROMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_LB_CKS_RANGE_START
uses CONFIG_LB_CKS_RANGE_END
uses CONFIG_LB_CKS_LOC
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses CONFIG_RAMBASE
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_GDB_STUB
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_VGA_ROM_RUN
uses CONFIG_HW_MEM_HOLE_SIZEK
uses CONFIG_HT_CHAIN_UNITID_BASE
uses CONFIG_HT_CHAIN_END_UNITID_BASE
uses CONFIG_SB_HT_CHAIN_ON_BUS0
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_VIDEO_MB
uses CONFIG_GFXUMA
uses CONFIG_HAVE_MAINBOARD_RESOURCES
###
### Build options
###
##
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
default CONFIG_ROM_SIZE=524288
##
## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default CONFIG_GENERATE_MP_TABLE=1
## ACPI tables will be included
default CONFIG_GENERATE_ACPI_TABLES=1
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=0
##
## Move the default coreboot cmos range off of AMD RTC registers
##
default CONFIG_LB_CKS_RANGE_START=49
default CONFIG_LB_CKS_RANGE_END=122
default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_PHYSICAL_CPUS=1
default CONFIG_LOGICAL_CPUS=1
#1G memory hole
default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
default CONFIG_VGA_ROM_RUN=1
# BTDC: Only one HT device on Herring.
#HT Unit ID offset
#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
default CONFIG_HT_CHAIN_UNITID_BASE=0x0
#real SB Unit ID
default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
#make the SB HT chain on bus 0
default CONFIG_SB_HT_CHAIN_ON_BUS0=1
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc8000
default CONFIG_DCACHE_RAM_SIZE=0x8000
default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default CONFIG_MAINBOARD_PART_NUMBER="pistachio"
default CONFIG_MAINBOARD_VENDOR="amd"
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
##
## coreboot C code runs at this location in RAM
##
default CONFIG_RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
default CONFIG_USE_PRINTK_IN_CAR=1
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
default CONFIG_VIDEO_MB=1
default CONFIG_GFXUMA=1
default CONFIG_HAVE_MAINBOARD_RESOURCES=1
### End Options.lb
end

115
src/mainboard/amd/rumba/Config.lb
View File

@ -1,115 +0,0 @@
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
##
## Set all of the defaults for an x86 architecture
##
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
##
## Romcc output
##
makerule ./failover.E
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./failover.inc
depends "$(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c ../romcc"
action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
end
makerule ./auto.E
depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
action "../romcc -E -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
makerule ./auto.inc
depends "$(CONFIG_MAINBOARD)/auto.c option_table.h ../romcc"
action "../romcc -mcpu=p2 -O -I$(TOP)/src -I. $(CPPFLAGS) $(CONFIG_MAINBOARD)/auto.c -o $@"
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit ./auto.inc
##
## Include the secondary Configuration files
##
dir /pc80
config chip.h
chip northbridge/amd/gx2
device apic_cluster 0 on
chip cpu/amd/model_gx2
device apic 0 on end
end
end
device pci_domain 0 on
device pci 1.0 on end
device pci 1.1 on end
chip southbridge/amd/cs5536
register "lpc_serirq_enable" = "0x80" # enabled with default timing
device pci d.0 on end # Realtek 8139 LAN
device pci f.0 on end # ISA Bridge
device pci f.2 on end # IDE Controller
device pci f.3 on end # Audio
device pci f.4 on end # OHCI
device pci f.4 on end # UHCI
end
end
end

159
src/mainboard/amd/rumba/Options.lb
View File

@ -1,159 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
default CONFIG_ROM_SIZE = 256*1024
###
### Build options
###
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default CONFIG_GENERATE_MP_TABLE=0
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=0
## Delay timer options
##
default CONFIG_UDELAY_TSC=1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=2
#object irq_tables.o
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=0
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
default CONFIG_CROSS_COMPILE=""
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
end

358
src/mainboard/amd/serengeti_cheetah/Config.lb
View File

@ -1,358 +0,0 @@
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/failovercalculation.lb
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
#dir /drivers/si/3114
#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o
if CONFIG_GENERATE_MP_TABLE
object mptable.o
end
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
#if CONFIG_GENERATE_ACPI_TABLES
# object acpi_tables.o
# object fadt.o
# if CONFIG_SB_HT_CHAIN_ON_BUS0
# object dsdt_bus0.o
# else
# object dsdt.o
# end
# object ssdt.o
# if CONFIG_ACPI_SSDTX_NUM
# if CONFIG_SB_HT_CHAIN_ON_BUS0
# object ssdt2_bus0.o
# else
# object ssdt2.o
# end
# end
#end
if CONFIG_GENERATE_ACPI_TABLES
object acpi_tables.o
object fadt.o
makerule dsdt.c
depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
action "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
action "mv dsdt_lb.hex dsdt.c"
end
object ./dsdt.o
#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
if CONFIG_ACPI_SSDTX_NUM
makerule ssdt2.c
depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
action "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
action "mv pci2.hex ssdt2.c"
end
object ./ssdt2.o
makerule ssdt3.c
depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
action "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
action "mv pci3.hex ssdt3.c"
end
object ./ssdt3.o
makerule ssdt4.c
depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
action "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
action "mv pci4.hex ssdt4.c"
end
object ./ssdt4.o
end
end
if CONFIG_USE_INIT
# compile cache_as_ram.c to auto.o
makerule ./cache_as_ram_auto.o
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
if CONFIG_USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
makerule ./apc_auto.o
depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
end
ldscript /arch/i386/init/ldscript_apc.lb
end
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
else
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
end
mainboardinit cpu/x86/32bit/entry32.inc
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
else
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
ldscript /arch/i386/lib/failover_failover.lds
end
else
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
##
## Include the secondary Configuration files
##
config chip.h
# sample config for amd/serengeti_cheetah
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_F
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on # northbridge
# devices on link 0, link 0 == LDT 0
chip southbridge/amd/amd8132
# the on/off keyword is mandatory
device pci 0.0 on end
device pci 0.1 on end
device pci 1.0 on end
device pci 1.1 on end
end
chip southbridge/amd/amd8111
# this "device pci 0.0" is the parent the next one
# PCI bridge
device pci 0.0 on
device pci 0.0 on end
device pci 0.1 on end
device pci 0.2 off end
device pci 1.0 off end
end
device pci 1.0 on
chip superio/winbond/w83627hf
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off # CIR
io 0x60 = 0x100
end
device pnp 2e.7 off # GAME_MIDI_GIPO1
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 5
end
end
end
device pci 1.1 on end
device pci 1.2 on end
device pci 1.3 on
chip drivers/i2c/i2cmux # pca9556 smbus mux
device i2c 18 on #0 pca9516 1
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
end
device i2c 18 on #1 pca9516 2
chip drivers/generic/generic #dimm 1-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 1-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 1-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 1-1-1
device i2c 53 on end
end
chip drivers/generic/generic #dimm 1-2-0
device i2c 54 on end
end
chip drivers/generic/generic #dimm 1-2-1
device i2c 55 on end
end
chip drivers/generic/generic #dimm 1-3-0
device i2c 56 on end
end
chip drivers/generic/generic #dimm 1-3-1
device i2c 57 on end
end
end
end
end # acpi
device pci 1.5 off end
device pci 1.6 off end
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
end # device pci 18.0
device pci 18.0 on end
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end
chip northbridge/amd/amdk8
device pci 19.0 on # northbridge
chip southbridge/amd/amd8151
# the on/off keyword is mandatory
device pci 0.0 on end
device pci 1.0 on end
end
end # device pci 19.0
device pci 19.0 on end
device pci 19.0 on end
device pci 19.1 on end
device pci 19.2 on end
device pci 19.3 on end
end
end #pci_domain
# chip drivers/generic/debug
# device pnp 0.0 off end # chip name
# device pnp 0.1 on end # pci_regs_all
# device pnp 0.2 off end # mem
# device pnp 0.3 off end # cpuid
# device pnp 0.4 off end # smbus_regs_all
# device pnp 0.5 off end # dual core msr
# device pnp 0.6 off end # cache size
# device pnp 0.7 off end # tsc
# end
end

325
src/mainboard/amd/serengeti_cheetah/Options.lb
View File

@ -1,325 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_GENERATE_ACPI_TABLES
uses CONFIG_HAVE_ACPI_RESUME
uses CONFIG_ACPI_SSDTX_NUM
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_USE_FAILOVER_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_FAILOVER_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses CONFIG_FALLBACK_SIZE
uses CONFIG_FAILOVER_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_LB_CKS_RANGE_START
uses CONFIG_LB_CKS_RANGE_END
uses CONFIG_LB_CKS_LOC
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses CONFIG_RAMBASE
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_GDB_STUB
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_HW_MEM_HOLE_SIZEK
uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
uses CONFIG_K8_HT_FREQ_1G_SUPPORT
uses CONFIG_HT_CHAIN_UNITID_BASE
uses CONFIG_HT_CHAIN_END_UNITID_BASE
uses CONFIG_SB_HT_CHAIN_ON_BUS0
uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
uses CONFIG_SERIAL_CPU_INIT
uses CONFIG_ENABLE_APIC_EXT_ID
uses CONFIG_APIC_ID_OFFSET
uses CONFIG_LIFT_BSP_APIC_ID
uses CONFIG_PCI_64BIT_PREF_MEM
uses CONFIG_RAMTOP
uses CONFIG_AP_CODE_IN_CAR
uses CONFIG_MEM_TRAIN_SEQ
uses CONFIG_WAIT_BEFORE_CPUS_INIT
uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
###
##
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
default CONFIG_ROM_SIZE=524288
##
## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
default CONFIG_FAILOVER_SIZE=0x01000
#more 1M for pgtbl
default CONFIG_RAMTOP=2048*1024
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
default CONFIG_HAVE_FAILOVER_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default CONFIG_GENERATE_MP_TABLE=1
## ACPI tables will be included
default CONFIG_GENERATE_ACPI_TABLES=1
## extra SSDT num
default CONFIG_ACPI_SSDTX_NUM=1
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=1
##
## Move the default coreboot cmos range off of AMD RTC registers
##
default CONFIG_LB_CKS_RANGE_START=49
default CONFIG_LB_CKS_RANGE_END=122
default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=8
default CONFIG_MAX_PHYSICAL_CPUS=4
default CONFIG_LOGICAL_CPUS=1
default CONFIG_SERIAL_CPU_INIT=0
default CONFIG_ENABLE_APIC_EXT_ID=0
default CONFIG_APIC_ID_OFFSET=0x8
default CONFIG_LIFT_BSP_APIC_ID=1
#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
#1G
default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
#512M
#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
#Opteron K8 1G HT Support
default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
#HT Unit ID offset, default is 1, the typical one
default CONFIG_HT_CHAIN_UNITID_BASE=0xa
#real SB Unit ID, default is 0x20, mean dont touch it at last
default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
#make the SB HT chain on bus 0, default is not (0)
default CONFIG_SB_HT_CHAIN_ON_BUS0=2
#only offset for SB chain?, default is yes(1)
#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#allow capable device use that above 4G
#default CONFIG_PCI_64BIT_PREF_MEM=1
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc8000
default CONFIG_DCACHE_RAM_SIZE=0x08000
default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
##
## for rev F training on AP purpose
##
default CONFIG_AP_CODE_IN_CAR=1
default CONFIG_MEM_TRAIN_SEQ=1
default CONFIG_WAIT_BEFORE_CPUS_INIT=1
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default CONFIG_MAINBOARD_PART_NUMBER="serengeti_cheetah"
default CONFIG_MAINBOARD_VENDOR="AMD"
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536 - CONFIG_FAILOVER_SIZE
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 32K heap
##
default CONFIG_HEAP_SIZE=0x8000
##
## Only use the option table in a normal image
##
default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
##
## Coreboot C code runs at this location in RAM
##
default CONFIG_RAMBASE=0x00100000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##
default CONFIG_USE_PRINTK_IN_CAR=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
end

362
src/mainboard/amd/serengeti_cheetah_fam10/Config.lb
View File

@ -1,362 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2007 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/failovercalculation.lb
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o
if CONFIG_GENERATE_MP_TABLE
object mptable.o
end
if CONFIG_GENERATE_PIRQ_TABLE
object irq_tables.o
end
if CONFIG_GENERATE_ACPI_TABLES
object acpi_tables.o
object fadt.o
makerule dsdt.c
depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
action "iasl -p $(CURDIR)/dsdt_lb -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
action "mv dsdt_lb.hex dsdt.c"
end
object ./dsdt.o
#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
if CONFIG_ACPI_SSDTX_NUM
makerule ssdt2.c
depends "$(CONFIG_MAINBOARD)/dx/pci2.asl"
action "iasl -p $(CURDIR)/pci2 -tc $(CONFIG_MAINBOARD)/dx/pci2.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
action "mv pci2.hex ssdt2.c"
end
object ./ssdt2.o
makerule ssdt3.c
depends "$(CONFIG_MAINBOARD)/dx/pci3.asl"
action "iasl -p $(CURDIR)/pci3 -tc $(CONFIG_MAINBOARD)/dx/pci3.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
action "mv pci3.hex ssdt3.c"
end
object ./ssdt3.o
makerule ssdt4.c
depends "$(CONFIG_MAINBOARD)/dx/pci4.asl"
action "iasl -p $(CURDIR)/pci4 -tc $(CONFIG_MAINBOARD)/dx/pci4.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
action "mv pci4.hex ssdt4.c"
end
object ./ssdt4.o
makerule ssdt5.c
depends "$(CONFIG_MAINBOARD)/dx/pci5.asl"
action "iasl -p $(CURDIR)/pci5 -tc $(CONFIG_MAINBOARD)/dx/pci5.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
action "mv pci5.hex ssdt5.c"
end
object ./ssdt5.o
end
end
if CONFIG_USE_INIT
# compile cache_as_ram.c to auto.o
makerule ./cache_as_ram_auto.o
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
if CONFIG_USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
makerule ./apc_auto.o
depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
end
ldscript /arch/i386/init/ldscript_apc.lb
end
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
else
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
end
mainboardinit cpu/x86/32bit/entry32.inc
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
else
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_HAVE_FAILOVER_BOOT
if CONFIG_USE_FAILOVER_IMAGE
ldscript /arch/i386/lib/failover_failover.lds
end
else
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if CONFIG_USE_INIT
initobject cache_as_ram_auto.o
else
mainboardinit ./cache_as_ram_auto.inc
end
##
## Include the secondary Configuration files
##
config chip.h
dir /southbridge/amd/amd8151
# sample config for amd/serengeti_cheetah_fam10
chip northbridge/amd/amdfam10/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_F_1207 #L1 and DDR2
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdfam10
device pci 18.0 on # northbridge
# devices on link 0, link 0 == LDT 0
chip southbridge/amd/amd8132
# the on/off keyword is mandatory
device pci 0.0 on end
device pci 0.1 on end
device pci 1.0 on end
device pci 1.1 on end
end
chip southbridge/amd/amd8111
# this "device pci 0.0" is the parent the next one
# PCI bridge
device pci 0.0 on
device pci 0.0 on end
device pci 0.1 on end
device pci 0.2 off end
device pci 1.0 off end
end
device pci 1.0 on
chip superio/winbond/w83627hf
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off # CIR
io 0x60 = 0x100
end
device pnp 2e.7 off # GAME_MIDI_GIPO1
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 5
end
end
end
device pci 1.1 on end
device pci 1.2 on end
device pci 1.3 on
chip drivers/i2c/i2cmux2 # pca9556 smbus mux
chip drivers/i2c/i2cmux2 # pca9556 smbus mux
device i2c 18 on #0 pca9516 1
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
end
device i2c 18 on #1 pca9516 2
chip drivers/generic/generic #dimm 1-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 1-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 1-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 1-1-1
device i2c 53 on end
end
end
end
end
end # acpi
device pci 1.5 off end
device pci 1.6 off end
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
end # device pci 18.0
device pci 18.0 on end
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
device pci 18.4 on end
# device pci 00.5 on end
end
end #pci_domain
#for node 32 to node 63
# device pci_domain 0 on
# chip northbridge/amd/amdfam10
# device pci 00.0 on end# northbridge
# device pci 00.0 on end
# device pci 00.0 on end
# device pci 00.0 on end
# device pci 00.1 on end
# device pci 00.2 on end
# device pci 00.3 on end
# device pci 00.4 on end
# device pci 00.5 on end
# end
# end #pci_domain
# chip drivers/generic/debug
# device pnp 0.0 off end # chip name
# device pnp 0.1 on end # pci_regs_all
# device pnp 0.2 off end # mem
# device pnp 0.3 off end # cpuid
# device pnp 0.4 off end # smbus_regs_all
# device pnp 0.5 off end # dual core msr
# device pnp 0.6 off end # cache size
# device pnp 0.7 off end # tsc
# device pnp 0.8 off end # hard reset
# device pnp 0.9 off end # mcp55
# device pnp 0.a on end # GH ext table
# end
end

365
src/mainboard/amd/serengeti_cheetah_fam10/Options.lb
View File

@ -1,365 +0,0 @@
#
# This file is part of the coreboot project.
#
# Copyright (C) 2007 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_GENERATE_ACPI_TABLES
uses CONFIG_HAVE_ACPI_RESUME
uses CONFIG_ACPI_SSDTX_NUM
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_USE_FAILOVER_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_FAILOVER_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses CONFIG_FALLBACK_SIZE
uses CONFIG_FAILOVER_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_ROMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_LB_CKS_RANGE_START
uses CONFIG_LB_CKS_RANGE_END
uses CONFIG_LB_CKS_LOC
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses CONFIG_RAMBASE
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_GDB_STUB
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_HW_MEM_HOLE_SIZEK
uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
uses CONFIG_HT_CHAIN_UNITID_BASE
uses CONFIG_HT_CHAIN_END_UNITID_BASE
uses CONFIG_SB_HT_CHAIN_ON_BUS0
uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
uses CONFIG_SERIAL_CPU_INIT
uses CONFIG_ENABLE_APIC_EXT_ID
uses CONFIG_APIC_ID_OFFSET
uses CONFIG_LIFT_BSP_APIC_ID
uses CONFIG_PCI_64BIT_PREF_MEM
uses CONFIG_RAMTOP
uses CONFIG_PCI_BUS_SEGN_BITS
uses CONFIG_AP_CODE_IN_CAR
uses CONFIG_MEM_TRAIN_SEQ
uses CONFIG_WAIT_BEFORE_CPUS_INIT
uses CONFIG_AMDMCT
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_AMD_UCODE_PATCH_FILE
uses CONFIG_ID_SECTION_OFFSET
###
### Build options
###
##
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
default CONFIG_ROM_SIZE=1024*1024
##
##
#FALLBACK_SIZE_SIZE is the amount of the ROM the complete fallback image will use
##
#FALLBACK: 1024K - 8K
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
#FAILOVER: 8k
default CONFIG_FAILOVER_SIZE=0x02000
#more 1M for pgtbl
#if there is RAM on node0, we need to set it to 32M, otherwise can not access CAR on node0, and RAM on node1 at same time.
default CONFIG_RAMTOP=16384*1024
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
default CONFIG_HAVE_FAILOVER_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default CONFIG_GENERATE_MP_TABLE=1
## ACPI tables will be included
default CONFIG_GENERATE_ACPI_TABLES=1
## extra SSDT num
default CONFIG_ACPI_SSDTX_NUM=31
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=1
##
## Move the default coreboot cmos range off of AMD RTC registers
##
default CONFIG_LB_CKS_RANGE_START=49
default CONFIG_LB_CKS_RANGE_END=122
default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
##
default CONFIG_SMP=1
default CONFIG_MAX_PHYSICAL_CPUS=8
default CONFIG_MAX_CPUS=6 * CONFIG_MAX_PHYSICAL_CPUS
default CONFIG_LOGICAL_CPUS=1
#default CONFIG_SERIAL_CPU_INIT=0
default CONFIG_ENABLE_APIC_EXT_ID=1
default CONFIG_APIC_ID_OFFSET=0x00
default CONFIG_LIFT_BSP_APIC_ID=1
#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
#1G
default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
#512M
#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
#HT Unit ID offset, default is 1, the typical one
default CONFIG_HT_CHAIN_UNITID_BASE=0xa
#real SB Unit ID, default is 0x20, mean dont touch it at last
default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
#make the SB HT chain on bus 0, default is not (0)
default CONFIG_SB_HT_CHAIN_ON_BUS0=2
#only offset for SB chain?, default is yes(1)
#default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#allow capable device use that above 4G
#default CONFIG_PCI_64BIT_PREF_MEM=1
#it only be 0, 1, 2, 3, 4 and default is 0
#default CONFIG_PCI_BUS_SEGN_BITS=3
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc4000
default CONFIG_DCACHE_RAM_SIZE=0x0c000
#default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x08000
default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
default CONFIG_USE_INIT=0
#default CONFIG_AP_CODE_IN_CAR=1
default CONFIG_MEM_TRAIN_SEQ=2
default CONFIG_WAIT_BEFORE_CPUS_INIT=0
default CONFIG_AMDMCT = 1
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
default CONFIG_MAINBOARD_PART_NUMBER="Cheetah Fam10"
default CONFIG_MAINBOARD_VENDOR="AMD"
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
##
## Set microcode patch file name
##
## Barcelona rev DR-Ax: "mc_patch_01000020.h"
## Barcelona rev DR-B0, B1, BA: "mc_patch_01000096.h"
## Barcelona rev DR-B2, B3: "mc_patch_01000095.h"
## Shanghai rev DA-C2: "mc_patch_0100009f.h"
##
default CONFIG_AMD_UCODE_PATCH_FILE="mc_patch_01000095.h"
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 768k heap
##
default CONFIG_HEAP_SIZE=0xc0000
##
## Only use the option table in a normal image
##
default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
##
## Coreboot C code runs at this location in RAM
##
default CONFIG_RAMBASE=0x00200000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##
default CONFIG_USE_PRINTK_IN_CAR=1
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
default CONFIG_ID_SECTION_OFFSET=0x80
### End Options.lb
end

297
src/mainboard/arima/hdama/Config.lb
View File

@ -1,297 +0,0 @@
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 128 * 1024
include /config/nofailovercalculation.lb
##
## Set all of the defaults for an x86 architecture
##
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
if CONFIG_GENERATE_MP_TABLE object mptable.o end
if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
makerule ./auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
##
## Include the secondary Configuration files
##
config chip.h
# config for arima/hdama
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_940
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on # northbridge
# devices on link 0, link 0 == LDT 0
chip southbridge/amd/amd8131
# the on/off keyword is mandatory
device pci 0.0 on # PCIX bridge
## On board NIC A
#chip drivers/generic/generic
# device pci 3.0 on
# irq 0 = 0x13
# end
#end
## On board NIC B
#chip drivers/generic/generic
# device pci 4.0 on
# irq 0 = 0x13
# end
#end
## PCI Slot 3
#chip drivers/generic/generic
# device pci 1.0 on
# irq 0 = 0x11
# irq 1 = 0x12
# irq 2 = 0x13
# irq 3 = 0x10
# end
#end
## PCI Slot 4
#chip drivers/generic/generic
# device pci 2.0 on
# irq 0 = 0x12
# irq 1 = 0x13
# irq 2 = 0x10
# irq 3 = 0x11
# end
#end
end
device pci 0.1 on end # IOAPIC
device pci 1.0 on # PCIX bridge
## PCI Slot 1
#chip drivers/generic/generic
# device pci 1.0 on
# irq 0 = 0x11
# irq 1 = 0x12
# irq 2 = 0x13
# irq 3 = 0x10
# end
#end
## PCI Slot 2
#chip drivers/generic/generic
# device pci 2.0 on
# irq 0 = 0x12
# irq 1 = 0x13
# irq 2 = 0x10
# irq 3 = 0x11
# end
#end
end
device pci 1.1 on end # IOAPIC
end
chip southbridge/amd/amd8111
# this "device pci 0.0" is the parent of the next one
# PCI bridge
device pci 0.0 on
device pci 0.0 on end # USB0
device pci 0.1 on end # USB1
device pci 0.2 off end # USB 2.0
device pci 1.0 off end # LAN
device pci 6.0 on end # ATI Rage XL
## PCI Slot 5 (correct?)
#chip drivers/generic/generic
# device pci 5.0 on
# irq 0 = 0x11
# irq 1 = 0x12
# irq 2 = 0x13
# irq 3 = 0x10
# end
#end
## PCI Slot 6 (correct?)
#chip drivers/generic/generic
# device pci 4.0 on
# irq 0 = 0x10
# irq 1 = 0x11
# irq 2 = 0x12
# irq 3 = 0x13
# end
#end
end
# LPC bridge
device pci 1.0 on
chip superio/nsc/pc87360
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 off # Com 2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.3 on # Com 1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.4 off end # SWC
device pnp 2e.5 off end # Mouse
device pnp 2e.6 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end
device pnp 2e.7 off end # GPIO
device pnp 2e.8 off end # ACB
device pnp 2e.9 off end # FSCM
device pnp 2e.a off end # WDT
end
end
device pci 1.1 on end # IDE
device pci 1.2 on end # SMBus 2.0
device pci 1.3 on # System Management
chip drivers/generic/generic
#phillips pca9545 smbus mux
device i2c 70 on
# analog_devices adm1026
chip drivers/generic/generic
device i2c 2c on end
end
end
device i2c 70 on end
device i2c 70 on end
device i2c 70 on end
end
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
chip drivers/generic/generic #dimm 1-0-0
device i2c 54 on end
end
chip drivers/generic/generic #dimm 1-0-1
device i2c 55 on end
end
chip drivers/generic/generic #dimm 1-1-0
device i2c 56 on end
end
chip drivers/generic/generic #dimm 1-1-1
device i2c 57 on end
end
end
device pci 1.5 off end # AC97 Audio
device pci 1.6 on end # AC97 Modem
register "ide0_enable" = "1"
register "ide1_enable" = "1"
end
end # device pci 18.0
device pci 18.0 on end # LDT1
device pci 18.0 on end # LDT2
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end # chip northbridge/amd/amdk8
chip northbridge/amd/amdk8
device pci 19.0 on end
device pci 19.0 on end
device pci 19.0 on end
device pci 19.1 on end
device pci 19.2 on end
device pci 19.3 on end
end
end
end

242
src/mainboard/arima/hdama/Options.lb
View File

@ -1,242 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses CONFIG_FALLBACK_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_LB_CKS_RANGE_START
uses CONFIG_LB_CKS_RANGE_END
uses CONFIG_LB_CKS_LOC
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_PART_NUMBER
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
uses CONFIG_RAMBASE
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_LOGICAL_CPUS
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
uses CONFIG_USE_PRINTK_IN_CAR
###
### Build options
###
##
## CONFIG_LOGICAL_CPUS enables dual core support
##
default CONFIG_LOGICAL_CPUS=1
##
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
default CONFIG_ROM_SIZE=524288
##
## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=9
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
default CONFIG_GENERATE_MP_TABLE=1
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=1
##
## Move the default coreboot cmos range off of AMD RTC registers
##
default CONFIG_LB_CKS_RANGE_START=49
default CONFIG_LB_CKS_RANGE_END=122
default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=4
default CONFIG_MAX_PHYSICAL_CPUS=2
##
## Build code to setup a generic IOAPIC
##
default CONFIG_IOAPIC=1
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xcf000
default CONFIG_DCACHE_RAM_SIZE=0x1000
default CONFIG_USE_INIT=0
#VGA
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
##
## Clean up the motherboard id strings
##
default CONFIG_MAINBOARD_PART_NUMBER="HDAMA"
default CONFIG_MAINBOARD_VENDOR="ARIMA"
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f
default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
##
## Coreboot C code runs at this location in RAM
##
default CONFIG_RAMBASE=0x00004000
##
## Load the payload from the ROM
##
default CONFIG_ROM_PAYLOAD = 1
###
### Defaults of options that you may want to override in the target config file
###
##
## The default compiler
##
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
default CONFIG_USE_PRINTK_IN_CAR=1
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
end

124
src/mainboard/artecgroup/dbe61/Config.lb
View File

@ -1,124 +0,0 @@
## CONFIG_XIP_ROM_SIZE must be a power of 2.
default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/nofailovercalculation.lb
##
## Set all of the defaults for an x86 architecture
##
arch i386 end
##
## Build the objects we have code for in this directory.
##
driver mainboard.o
if CONFIG_GENERATE_PIRQ_TABLE object irq_tables.o end
#compile cache_as_ram.c to auto.inc
makerule ./cache_as_ram_auto.inc
depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
##
## Build our 16 bit and 32 bit coreboot entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
##
## Build our reset vector (This is where coreboot is entered)
##
if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/x86/32bit/reset32.lds
end
### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
###
### This is the early phase of coreboot startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
# mainboardinit ./failover.inc
end
###
### O.k. We aren't just an intermediary anymore!
###
##
## Setup RAM
##
mainboardinit cpu/x86/fpu_enable.inc
mainboardinit cpu/amd/model_lx/cache_as_ram.inc
mainboardinit ./cache_as_ram_auto.inc
##
## Include the secondary Configuration files
##
dir /pc80
config chip.h
chip northbridge/amd/lx
device pci_domain 0 on
device pci 1.0 on end # Northbridge
device pci 1.1 on end # Graphics
chip southbridge/amd/cs5536
# IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
# SIRQ Mode = Active(Quiet) mode. Save power....
# Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
register "lpc_serirq_enable" = "0x00001002"
register "lpc_serirq_polarity" = "0x0000EFFD"
register "lpc_serirq_mode" = "1"
register "enable_gpio_int_route" = "0x0D0C0700"
register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
register "enable_USBP4_device" = "0" #0: host, 1:device
register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
register "com1_enable" = "0"
register "com1_address" = "0x2F8"
register "com1_irq" = "3"
register "com2_enable" = "1"
register "com2_address" = "0x3F8"
register "com2_irq" = "4"
register "unwanted_vpci[0]" = "0" # End of list has a zero
device pci b.0 on end # Slot 3
device pci c.0 on end # Slot 4
device pci d.0 on end # Slot 1
device pci e.0 on end # Slot 2
device pci f.0 on end # ISA Bridge
device pci f.2 on end # IDE Controller
device pci f.3 on end # Audio
device pci f.4 on end # OHCI
device pci f.5 on end # EHCI
end
end
# APIC cluster is late CPU init.
device apic_cluster 0 on
chip cpu/amd/model_lx
device apic 0 on end
end
end
end

180
src/mainboard/artecgroup/dbe61/Options.lb
View File

@ -1,180 +0,0 @@
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_GENERATE_PIRQ_TABLE
uses CONFIG_USE_FALLBACK_IMAGE
uses CONFIG_HAVE_FALLBACK_BOOT
uses CONFIG_HAVE_HARD_RESET
uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_USE_OPTION_TABLE
uses CONFIG_ROM_PAYLOAD
uses CONFIG_IRQ_SLOT_COUNT
uses CONFIG_MAINBOARD
uses CONFIG_MAINBOARD_VENDOR
uses CONFIG_MAINBOARD_PART_NUMBER
uses COREBOOT_EXTRA_VERSION
uses CONFIG_ARCH
uses CONFIG_FALLBACK_SIZE
uses CONFIG_STACK_SIZE
uses CONFIG_HEAP_SIZE
uses CONFIG_ROM_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_IMAGE_SIZE
uses CONFIG_ROM_SECTION_SIZE
uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses CONFIG_ROMBASE
uses CONFIG_RAMBASE
uses CONFIG_XIP_ROM_SIZE
uses CONFIG_XIP_ROM_BASE
uses CONFIG_GENERATE_MP_TABLE
uses CONFIG_CROSS_COMPILE
uses CC
uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_TTYS0_BAUD
uses CONFIG_TTYS0_BASE
uses CONFIG_TTYS0_LCS
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses CONFIG_VIDEO_MB
uses CONFIG_USE_DCACHE_RAM
uses CONFIG_DCACHE_RAM_BASE
uses CONFIG_DCACHE_RAM_SIZE
uses CONFIG_USE_PRINTK_IN_CAR
uses CONFIG_PIRQ_ROUTE
## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
default CONFIG_ROM_SIZE = 256*1024
###
### Build options
###
default CONFIG_CONSOLE_VGA=0
default CONFIG_PCI_ROM_RUN=0
default CONFIG_VIDEO_MB=8
##
## Build code for the fallback boot
##
default CONFIG_HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default CONFIG_GENERATE_MP_TABLE=0
##
## Build code to reset the motherboard from coreboot
##
default CONFIG_HAVE_HARD_RESET=0
## Delay timer options
##
default CONFIG_UDELAY_TSC=1
default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
##
## Build code to export a programmable irq routing table
##
default CONFIG_GENERATE_PIRQ_TABLE=1
default CONFIG_IRQ_SLOT_COUNT=3
default CONFIG_PIRQ_ROUTE=1
#object irq_tables.o
##
## Build code to export a CMOS option table
##
default CONFIG_HAVE_OPTION_TABLE=0
###
### coreboot layout values
###
## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
default CONFIG_ROM_IMAGE_SIZE = 65536
default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
##
## enable CACHE_AS_RAM specifics
##
default CONFIG_USE_DCACHE_RAM=1
default CONFIG_DCACHE_RAM_BASE=0xc8000
default CONFIG_DCACHE_RAM_SIZE=0x08000
default CONFIG_USE_PRINTK_IN_CAR=1
##
## Use a small 8K stack
##
default CONFIG_STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default CONFIG_HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
default CONFIG_USE_OPTION_TABLE = 0
default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
default CONFIG_CROSS_COMPILE=""
default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## The Serial Console
##
# To Enable the Serial Console
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
default CONFIG_TTYS0_BAUD=115200
#default CONFIG_TTYS0_BAUD=57600
#default CONFIG_TTYS0_BAUD=38400
#default CONFIG_TTYS0_BAUD=19200
#default CONFIG_TTYS0_BAUD=9600
#default CONFIG_TTYS0_BAUD=4800
#default CONFIG_TTYS0_BAUD=2400
#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
##
## EMERG 1 system is unusable
## ALERT 2 action must be taken immediately
## CRIT 3 critical conditions
## ERR 4 error conditions
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
end

2
src/mainboard/artecgroup/dbe61/realmode/Config.lb
View File

@ -1,2 +0,0 @@
config chip.h
driver vgabios.o

Some files were not shown because too many files have changed in this diff Show More