nvidia southbridges: don't touch 0x78 in LPC bridge with Fam10h
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC bridge register 0x78 (particularly the 0x7b byte) to get to ramstage: Assume that there's something about this register that adjusting it the way we do for K8 is something that can/should be universally avoided on all Fam10h systems with these chipsets. Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-on: http://review.coreboot.org/10984 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
This commit is contained in:
parent
ff40196c6c
commit
acba73aefc
|
@ -67,15 +67,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
|
|||
#include "resourcemap.c"
|
||||
#include "cpu/amd/quadcore/quadcore.c"
|
||||
|
||||
/*
|
||||
* Avoid crash (complete with severe memory corruption!) during initial CAR boot
|
||||
* in ck804_early_setup_x().
|
||||
* Interestingly once the system is fully booted into Linux this can be set, but
|
||||
* not before! Apparently something isn't initialized but the amount of effort
|
||||
* required to fix this is non-negligible and of unknown real-world benefit
|
||||
*/
|
||||
#define CK804_SKIP_PCI_REG_78_INIT 1
|
||||
|
||||
#define CK804_MB_SETUP \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+33, ~(0x0f),(0x04 | 0x01), /* -ENOINFO Proprietary BIOS sets this register; "When in Rome..."*/
|
||||
|
||||
|
|
|
@ -152,10 +152,24 @@ static void ck804_early_setup(void)
|
|||
RES_PCI_IO, PCI_ADDR(CK804B_BUSN, CK804B_DEVN_BASE + 9, 0, 0x74), 0xffffffc0, 0x00000000,
|
||||
#endif
|
||||
|
||||
#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
|
||||
/*
|
||||
* Avoid crash (complete with severe memory corruption!) during initial CAR boot
|
||||
* in ck804_early_setup_x() on Fam10h systems by not touching 0x78.
|
||||
* Interestingly once the system is fully booted into Linux this can be set, but
|
||||
* not before! Apparently something isn't initialized but the amount of effort
|
||||
* required to fix this is non-negligible and of unknown real-world benefit
|
||||
*/
|
||||
#else
|
||||
RES_PCI_IO, PCI_ADDR(0, CK804_DEVN_BASE + 1, 0, 0x78), 0xc0ffffff, 0x19000000,
|
||||
#endif
|
||||
RES_PCI_IO, PCI_ADDR(0, CK804_DEVN_BASE + 1, 0, 0xe0), 0xfffffeff, 0x00000100,
|
||||
|
||||
#if CONFIG_CK804_NUM > 1
|
||||
/*
|
||||
* Avoid touching 0x78 for CONFIG_NORTHBRIDGE_AMD_AMDFAM10 for
|
||||
* non-primary chain too???
|
||||
*/
|
||||
RES_PCI_IO, PCI_ADDR(CK804B_BUSN, CK804B_DEVN_BASE + 1, 0, 0x78), 0xc0ffffff, 0x20000000,
|
||||
RES_PCI_IO, PCI_ADDR(CK804B_BUSN, CK804B_DEVN_BASE + 1, 0, 0xe0), 0xfffffeff, 0x00000000,
|
||||
RES_PCI_IO, PCI_ADDR(CK804B_BUSN, CK804B_DEVN_BASE + 1, 0, 0xe8), 0xffffff00, 0x000000ff,
|
||||
|
|
|
@ -142,7 +142,15 @@ static void ck804_early_setup(unsigned ck804_num, unsigned *busn,
|
|||
CK804_MB_SETUP
|
||||
#endif
|
||||
|
||||
#ifndef CK804_SKIP_PCI_REG_78_INIT
|
||||
#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
|
||||
/*
|
||||
* Avoid crash (complete with severe memory corruption!) during initial CAR boot
|
||||
* in ck804_early_setup_x() on Fam10h systems by not touching 0x78.
|
||||
* Interestingly once the system is fully booted into Linux this can be set, but
|
||||
* not before! Apparently something isn't initialized but the amount of effort
|
||||
* required to fix this is non-negligible and of unknown real-world benefit
|
||||
*/
|
||||
#else
|
||||
RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x78), 0xc0ffffff, 0x19000000,
|
||||
#endif
|
||||
RES_PCI_IO, PCI_ADDR(0, 1, 0, 0xe0), 0xfffffeff, 0x00000100,
|
||||
|
@ -239,6 +247,10 @@ static void ck804_early_setup(unsigned ck804_num, unsigned *busn,
|
|||
RES_PCI_IO, PCI_ADDR(0, 9, 0, 0x4c), 0xfe00ffff, 0x00440000,
|
||||
RES_PCI_IO, PCI_ADDR(0, 9, 0, 0x74), 0xffffffc0, 0x00000000,
|
||||
|
||||
/*
|
||||
* Avoid touching 0x78 for CONFIG_NORTHBRIDGE_AMD_AMDFAM10 for
|
||||
* non-primary chains too???
|
||||
*/
|
||||
RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x78), 0xc0ffffff, 0x20000000,
|
||||
RES_PCI_IO, PCI_ADDR(0, 1, 0, 0xe0), 0xfffffeff, 0x00000000,
|
||||
RES_PCI_IO, PCI_ADDR(0, 1, 0, 0xe8), 0xffffff00, 0x000000ff,
|
||||
|
|
|
@ -242,7 +242,17 @@ static void mcp55_early_setup(unsigned mcp55_num, unsigned *busn,
|
|||
RES_PCI_IO, PCI_ADDR(0, 6, 0, 0x74), 0xFFFFFFC0, 0x00000000,
|
||||
RES_PCI_IO, PCI_ADDR(0, 6, 0, 0xC0), 0x00000000, 0xCB8410DE,
|
||||
RES_PCI_IO, PCI_ADDR(0, 6, 0, 0xC4), 0xFFFFFFF8, 0x00000007,
|
||||
#if IS_ENABLED(CONFIG_NORTHBRIDGE_AMD_AMDFAM10)
|
||||
/*
|
||||
* Avoid crash (complete with severe memory corruption!) during initial CAR boot
|
||||
* in mcp55_early_setup_x() on Fam10h systems by not touching 0x78.
|
||||
* Interestingly once the system is fully booted into Linux this can be set, but
|
||||
* not before! Apparently something isn't initialized but the amount of effort
|
||||
* required to fix this is non-negligible and of unknown real-world benefit
|
||||
*/
|
||||
#else
|
||||
RES_PCI_IO, PCI_ADDR(0, 1, 0, 0x78), 0xC0FFFFFF, 0x19000000,
|
||||
#endif
|
||||
|
||||
#if CONFIG_MCP55_USE_AZA
|
||||
RES_PCI_IO, PCI_ADDR(0, 6, 1, 0x40), 0x00000000, 0xCB8410DE,
|
||||
|
|
Loading…
Reference in New Issue