Documentation/mainboard: Move flashing instructions to common dir
Move the instructions for flashing coreboot with fwupd to common directory as the process is identical across all models and variants. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I293acf962b32c81fdf482e0df15363e1cffa39bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/62300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit is contained in:
parent
5da05b6e35
commit
ad8437c5aa
|
@ -0,0 +1,71 @@
|
|||
# Flashing with fwupd
|
||||
|
||||
#### **Requirements:**
|
||||
|
||||
* fwupd version 1.5.6 or later
|
||||
* The battery must be charged to at least 30%
|
||||
* The charger must be connected (either USB-C or DC Jack)
|
||||
* BIOS Lock must be disabled
|
||||
* Supported Linux distribution (Ubuntu 20.04 +, Linux Mint 20.1 + elementaryOS 6 +, Manjaro 21+)
|
||||
|
||||
**fwupd 1.5.6 or later**
|
||||
To check the version of **fwupd** you have installed, open a terminal window and enter the below command:
|
||||
|
||||
```
|
||||
fwupdmgr --version
|
||||
```
|
||||
|
||||
This will show the version number. **1.5.6** or greater will work.
|
||||
![fwupd version](fwupdVersion.png)
|
||||
On Ubuntu 20.04, Ubuntu 20.10, Linux Mint 20.1 and elementaryOS 6, fwupd 1.5.6 can be installed from our PPA with the below terminal commands:
|
||||
|
||||
```
|
||||
sudo add-apt-repository ppa:starlabs/ppa
|
||||
sudo apt update
|
||||
sudo apt install fwupd
|
||||
```
|
||||
|
||||
On Manjaro:
|
||||
|
||||
```
|
||||
sudo pacman -Sy fwupd-git flashrom-starlabs
|
||||
```
|
||||
|
||||
Instructions for other distributions will be added once fwupd 1.5.6 is available. If you are not using one of the distributions listed above, it is possible to install coreboot using a Live USB.
|
||||
|
||||
**Disable BIOS Lock**
|
||||
BIOS Lock must be disabled when switching from the standard AMI (American Megatrends Inc.) firmware to coreboot. To disable BIOS Lock:
|
||||
|
||||
1\. Start with your LabTop turned off\. Turn it on whilst holding the **F2** key to access the BIOS settings.
|
||||
2\. When the BIOS settings load, use the arrow keys to navigate to the **Advanced** tab\. Here you will see **BIOS Lock**\.
|
||||
3\. Press `Enter` to change this setting from **Enabled** to **Disabled**
|
||||
|
||||
![Disable BIOS Lock](BiosLock.jpg)
|
||||
|
||||
4\. Next, press the `F10` key to **Save & Exit** and then `Enter` to confirm.
|
||||
|
||||
#### **Switching Branch**
|
||||
|
||||
Switching branch refers to changing from AMI firmware to coreboot, or vice versa.
|
||||
|
||||
First, check for new firmware files with the below terminal command:
|
||||
|
||||
```
|
||||
fwupdmgr refresh --force
|
||||
```
|
||||
|
||||
Then, to change branch, enter the below terminal command:
|
||||
|
||||
```
|
||||
fwupdmgr switch-branch
|
||||
```
|
||||
|
||||
You can then select which branch you would like to use, by typing in the corresponding number:
|
||||
![Switch Branch](SwitchBranch.png)
|
||||
You will be prompted to confirm, press `y` to continue or `n` to cancel.
|
||||
|
||||
Once the switch has been completed, you will be prompted to restart.
|
||||
|
||||
The next reboot can take up to **5 minutes,** do not interrupt this process or disconnect the charger. Once the reboot is complete, that's it - you'll continue to receive updates for whichever branch you are using.
|
||||
|
||||
You can switch branch at any time.
|
|
@ -83,72 +83,4 @@ make
|
|||
| External flashing | yes |
|
||||
+---------------------+------------+
|
||||
|
||||
#### **Requirements:**
|
||||
|
||||
* fwupd version 1.5.6 or later
|
||||
* The battery must be charged to at least 30%
|
||||
* The charger must be connected (either USB-C or DC Jack)
|
||||
* BIOS Lock must be disabled
|
||||
* Supported Linux distribution (Ubuntu 20.04 +, Linux Mint 20.1 + elementaryOS 6 +, Manjaro 21+)
|
||||
|
||||
**fwupd 1.5.6 or later**
|
||||
To check the version of **fwupd** you have installed, open a terminal window and enter the below command:
|
||||
|
||||
```
|
||||
fwupdmgr --version
|
||||
```
|
||||
|
||||
This will show the version number. **1.5.6** or greater will work.
|
||||
![fwupd version](fwupdVersion.png)
|
||||
On Ubuntu 20.04, Ubuntu 20.10, Linux Mint 20.1 and elementaryOS 6, fwupd 1.5.6 can be installed from our PPA with the below terminal commands:
|
||||
|
||||
```
|
||||
sudo add-apt-repository ppa:starlabs/ppa
|
||||
sudo apt update
|
||||
sudo apt install fwupd
|
||||
```
|
||||
|
||||
On Manjaro:
|
||||
|
||||
```
|
||||
sudo pacman -Sy fwupd-git flashrom-starlabs
|
||||
```
|
||||
|
||||
Instructions for other distributions will be added once fwupd 1.5.6 is available. If you are not using one of the distributions listed above, it is possible to install coreboot using a Live USB.
|
||||
|
||||
**Disable BIOS Lock**
|
||||
BIOS Lock must be disabled when switching from the standard AMI (American Megatrends Inc.) firmware to coreboot. To disable BIOS Lock:
|
||||
|
||||
1\. Start with your LabTop turned off\. Turn it on whilst holding the **F2** key to access the BIOS settings.
|
||||
2\. When the BIOS settings load, use the arrow keys to navigate to the **Advanced** tab\. Here you will see **BIOS Lock**\.
|
||||
3\. Press `Enter` to change this setting from **Enabled** to **Disabled**
|
||||
|
||||
![Disable BIOS Lock](BiosLock.jpg)
|
||||
|
||||
4\. Next, press the `F10` key to **Save & Exit** and then `Enter` to confirm.
|
||||
|
||||
#### **Switching Branch**
|
||||
|
||||
Switching branch refers to changing from AMI firmware to coreboot, or vice versa.
|
||||
|
||||
First, check for new firmware files with the below terminal command:
|
||||
|
||||
```
|
||||
fwupdmgr refresh --force
|
||||
```
|
||||
|
||||
Then, to change branch, enter the below terminal command:
|
||||
|
||||
```
|
||||
fwupdmgr switch-branch
|
||||
```
|
||||
|
||||
You can then select which branch you would like to use, by typing in the corresponding number:
|
||||
![Switch Branch](SwitchBranch.png)
|
||||
You will be prompted to confirm, press `y` to continue or `n` to cancel.
|
||||
|
||||
Once the switch has been completed, you will be prompted to restart.
|
||||
|
||||
The next reboot can take up to **5 minutes,** do not interrupt this process or disconnect the charger. Once the reboot is complete, that's it - you'll continue to receive updates for whichever branch you are using.
|
||||
|
||||
You can switch branch at any time.
|
||||
Please see [here](../common/flashing.md) for instructions on how to flash with fwupd.
|
||||
|
|
Loading…
Reference in New Issue