soc/amd/picasso: remove warm reset flag code
Since the MCA(X) registers have defined values on the cold boot path, the is_warm_reset check can be dropped. Also the warm reset bit in the NCP_ERR register doesn't behave as the PPR [1] suggested; no matter if something was written to the register or the machine went through a warm reset cycle, the NCP_WARM_BOOT bit never got set. [1] checked with PPR for AMD Family 17h Models 11h,18h B1 (RV,PCO) #55570 Rev 3.15 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e6df98ffd5d15ca204c9847a76c19c753726737 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This commit is contained in:
parent
71971c9d7e
commit
aea59401d0
|
@ -59,8 +59,6 @@ void mp_init_cpus(struct bus *cpu_bus)
|
|||
|
||||
/* pre_mp_init made the flash not cacheable. Reset to WP for performance. */
|
||||
mtrr_use_temp_range(FLASH_BASE_ADDR, CONFIG_ROM_SIZE, MTRR_TYPE_WRPROT);
|
||||
|
||||
set_warm_reset_flag();
|
||||
}
|
||||
|
||||
static void model_17_init(struct device *dev)
|
||||
|
|
|
@ -83,7 +83,6 @@
|
|||
#define ACPI_GPE0_BLK (ACPI_IO_BASE + 0x20) /* 8 bytes */
|
||||
#define ACPI_GPE0_STS (ACPI_GPE0_BLK + 0x00) /* 4 bytes */
|
||||
#define ACPI_GPE0_EN (ACPI_GPE0_BLK + 0x04) /* 4 bytes */
|
||||
#define NCP_ERR 0xf0
|
||||
#define SMB_BASE_ADDR 0xb00
|
||||
#define PM2_INDEX 0xcd0
|
||||
#define PM2_DATA 0xcd1
|
||||
|
|
|
@ -140,9 +140,6 @@
|
|||
#define SATA_CAPABILITIES_REG 0xfc
|
||||
#define SATA_CAPABILITY_SPM BIT(12)
|
||||
|
||||
/* IO 0xf0 NCP Error */
|
||||
#define NCP_WARM_BOOT BIT(7) /* Write-once */
|
||||
|
||||
typedef struct aoac_devs {
|
||||
unsigned int :7;
|
||||
unsigned int ic2e:1; /* 7: I2C2 */
|
||||
|
|
|
@ -159,36 +159,34 @@ void check_mca(void)
|
|||
cap = rdmsr(IA32_MCG_CAP);
|
||||
num_banks = cap.lo & MCA_BANKS_MASK;
|
||||
|
||||
if (is_warm_reset()) {
|
||||
for (i = 0 ; i < num_banks ; i++) {
|
||||
mci.sts = rdmsr(MCAX_STATUS_MSR(i));
|
||||
if (mci.sts.hi || mci.sts.lo) {
|
||||
int core = cpuid_ebx(1) >> 24;
|
||||
for (i = 0 ; i < num_banks ; i++) {
|
||||
mci.sts = rdmsr(MCAX_STATUS_MSR(i));
|
||||
if (mci.sts.hi || mci.sts.lo) {
|
||||
int core = cpuid_ebx(1) >> 24;
|
||||
|
||||
printk(BIOS_WARNING, "#MC Error: core %d, bank %d %s\n",
|
||||
core, i,
|
||||
i < ARRAY_SIZE(mca_bank_name) ? mca_bank_name[i] : "");
|
||||
printk(BIOS_WARNING, "#MC Error: core %d, bank %d %s\n",
|
||||
core, i,
|
||||
i < ARRAY_SIZE(mca_bank_name) ? mca_bank_name[i] : "");
|
||||
|
||||
printk(BIOS_WARNING, " MC%d_STATUS = %08x_%08x\n",
|
||||
i, mci.sts.hi, mci.sts.lo);
|
||||
mci.addr = rdmsr(MCAX_ADDR_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_ADDR = %08x_%08x\n",
|
||||
i, mci.addr.hi, mci.addr.lo);
|
||||
mci.misc = rdmsr(MCAX_MISC0_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_MISC = %08x_%08x\n",
|
||||
i, mci.misc.hi, mci.misc.lo);
|
||||
mci.ctl = rdmsr(MCAX_CTL_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_CTL = %08x_%08x\n",
|
||||
i, mci.ctl.hi, mci.ctl.lo);
|
||||
mci.cmask = rdmsr(MCA_CTL_MASK_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_CTL_MASK = %08x_%08x\n",
|
||||
i, mci.cmask.hi, mci.cmask.lo);
|
||||
printk(BIOS_WARNING, " MC%d_STATUS = %08x_%08x\n",
|
||||
i, mci.sts.hi, mci.sts.lo);
|
||||
mci.addr = rdmsr(MCAX_ADDR_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_ADDR = %08x_%08x\n",
|
||||
i, mci.addr.hi, mci.addr.lo);
|
||||
mci.misc = rdmsr(MCAX_MISC0_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_MISC = %08x_%08x\n",
|
||||
i, mci.misc.hi, mci.misc.lo);
|
||||
mci.ctl = rdmsr(MCAX_CTL_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_CTL = %08x_%08x\n",
|
||||
i, mci.ctl.hi, mci.ctl.lo);
|
||||
mci.cmask = rdmsr(MCA_CTL_MASK_MSR(i));
|
||||
printk(BIOS_WARNING, " MC%d_CTL_MASK = %08x_%08x\n",
|
||||
i, mci.cmask.hi, mci.cmask.lo);
|
||||
|
||||
mci.bank = i;
|
||||
if (CONFIG(ACPI_BERT)
|
||||
&& mca_valid(mci.sts))
|
||||
build_bert_mca_error(&mci);
|
||||
}
|
||||
mci.bank = i;
|
||||
if (CONFIG(ACPI_BERT)
|
||||
&& mca_valid(mci.sts))
|
||||
build_bert_mca_error(&mci);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
@ -7,18 +7,6 @@
|
|||
#include <amdblocks/acpimmio.h>
|
||||
#include <amdblocks/reset.h>
|
||||
|
||||
void set_warm_reset_flag(void)
|
||||
{
|
||||
uint8_t ncp = inb(NCP_ERR);
|
||||
|
||||
outb(NCP_ERR, ncp | NCP_WARM_BOOT);
|
||||
}
|
||||
|
||||
int is_warm_reset(void)
|
||||
{
|
||||
return !!(inb(NCP_ERR) & NCP_WARM_BOOT);
|
||||
}
|
||||
|
||||
void do_cold_reset(void)
|
||||
{
|
||||
/* De-assert and then assert all PwrGood signals on CF9 reset. */
|
||||
|
@ -29,8 +17,6 @@ void do_cold_reset(void)
|
|||
|
||||
void do_warm_reset(void)
|
||||
{
|
||||
set_warm_reset_flag();
|
||||
|
||||
/* Assert reset signals only. */
|
||||
outb(RST_CPU | SYS_RST, RST_CNT);
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue