sb/via/k8t890: add vga textmode code for k8m890 chrome igp.
Add initialisation for the VIA Chrome 9 IGP on the k8m890 through native code and through the general vga infrastructure i committed a month or two ago. Add videoram_size option for k8m890 and the Asus M2V-MX SE. Now the Asus M2V-MX SE will magically come up with a working standard VGA 80x25 textmode. Many thanks to the people who worked hard on the Asus M2V-MX SE, and all of its components; this vga bringup was a breeze thanks to your hard work for this excellently supported board. And separate thanks to Rudolf Marek for spurring me on and for providing a register dump. Signed-off-by: Luc Verhaegen <libv@skynet.be> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Luc Verhaegen
parent
b2bd9963a5
commit
aeb6c9870f
|
|
@ -44,7 +44,7 @@ uses CONFIG_XIP_ROM_SIZE
|
|||
uses CONFIG_XIP_ROM_BASE
|
||||
uses CONFIG_STACK_SIZE
|
||||
uses CONFIG_HEAP_SIZE
|
||||
# uses CONFIG_USE_OPTION_TABLE
|
||||
uses CONFIG_USE_OPTION_TABLE
|
||||
uses CONFIG_LB_MEM_TOPK
|
||||
uses CONFIG_HAVE_ACPI_TABLES
|
||||
uses CONFIG_HAVE_MAINBOARD_RESOURCES
|
||||
|
|
@ -74,6 +74,7 @@ uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
|||
uses CONFIG_CONSOLE_SERIAL8250
|
||||
uses CONFIG_HAVE_INIT_TIMER
|
||||
uses CONFIG_GDB_STUB
|
||||
uses CONFIG_VGA
|
||||
uses CONFIG_CONSOLE_VGA
|
||||
uses CONFIG_PCI_ROM_RUN
|
||||
# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
|
||||
|
|
@ -101,7 +102,7 @@ default CONFIG_HAVE_HARD_RESET = 1
|
|||
default CONFIG_HAVE_PIRQ_TABLE = 0
|
||||
default CONFIG_IRQ_SLOT_COUNT = 11 # FIXME?
|
||||
default CONFIG_HAVE_MP_TABLE = 0
|
||||
default CONFIG_HAVE_OPTION_TABLE = 0 # FIXME
|
||||
default CONFIG_HAVE_OPTION_TABLE = 1 # FIXME
|
||||
# Move the default coreboot CMOS range off of AMD RTC registers.
|
||||
default CONFIG_LB_CKS_RANGE_START = 49
|
||||
default CONFIG_LB_CKS_RANGE_END = 122
|
||||
|
|
@ -136,6 +137,7 @@ default CONFIG_SB_HT_CHAIN_ON_BUS0 = 1
|
|||
# Only offset for SB chain?, default is yes(1).
|
||||
default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
|
||||
|
||||
default CONFIG_VGA = 1
|
||||
default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
|
||||
default CONFIG_PCI_ROM_RUN = 0 # Needed for VGA.
|
||||
default CONFIG_USE_DCACHE_RAM = 1
|
||||
|
|
@ -157,6 +159,7 @@ default CONFIG_HEAP_SIZE = 256 * 1024
|
|||
default CONFIG_LB_MEM_TOPK = 32768
|
||||
# to 1MB
|
||||
default CONFIG_RAMBASE = 0x1F00000
|
||||
default CONFIG_USE_OPTION_TABLE = 0
|
||||
# default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
|
||||
default CONFIG_ROM_PAYLOAD = 1
|
||||
default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32"
|
||||
|
|
|
|||
|
|
@ -43,6 +43,7 @@ entries
|
|||
440 4 e 9 slow_cpu
|
||||
444 1 e 1 nmi
|
||||
445 1 e 1 iommu
|
||||
448 3 e 10 videoram_size
|
||||
728 256 h 0 user_data
|
||||
984 16 h 0 check_sum
|
||||
# Reserve the extended AMD configuration registers
|
||||
|
|
@ -90,6 +91,13 @@ enumerations
|
|||
9 5 37.5%
|
||||
9 6 25.0%
|
||||
9 7 12.5%
|
||||
# videoram_size: mimics the bits in the ramcontroller.
|
||||
10 1 8MB
|
||||
10 2 16MB
|
||||
10 3 32MB
|
||||
10 4 64MB
|
||||
10 5 128MB
|
||||
10 6 256MB
|
||||
|
||||
checksums
|
||||
|
||||
|
|
|
|||
|
|
@ -25,3 +25,4 @@ driver k8t890_host_ctrl.o
|
|||
driver k8t890_pcie.o
|
||||
driver k8t890_traf_ctrl.o
|
||||
driver k8t890_error.o
|
||||
driver k8m890_chrome.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,179 @@
|
|||
/*
|
||||
* Copyright (C) 2007-2009 Luc Verhaegen <libv@skynet.be>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation; either version 2 of the License, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* this program; if not, write to the Free Software Foundation, Inc., 51
|
||||
* Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <string.h> /* for memset */
|
||||
#include "k8t890.h"
|
||||
|
||||
#if CONFIG_VGA == 1
|
||||
#include <pc80/vga_io.h>
|
||||
#include <pc80/vga.h>
|
||||
#include <arch/io.h>
|
||||
|
||||
/*
|
||||
*
|
||||
*/
|
||||
static void
|
||||
chrome_vga_init(struct device *dev)
|
||||
{
|
||||
vga_sr_write(0x10, 0x01); /* unlock extended regs */
|
||||
|
||||
vga_sr_mask(0x1A, 0x02, 0x02); /* enable mmio */
|
||||
|
||||
vga_sr_mask(0x1A, 0x40, 0x40); /* Software Reset */
|
||||
|
||||
vga_cr_mask(0x6A, 0x00, 0xC8); /* Disable CRTC2 & Simultaneous */
|
||||
|
||||
/* Make sure that non of the primary VGA overflow registers are set */
|
||||
vga_cr_write(0x33, 0x00);
|
||||
vga_cr_write(0x35, 0x00);
|
||||
vga_cr_mask(0x11, 0x00, 0x30);
|
||||
|
||||
vga_sr_mask(0x16, 0x00, 0x40); /* Wire CRT to CRTC1 */
|
||||
vga_cr_mask(0x36, 0x00, 0x30); /* Power on CRT */
|
||||
|
||||
/* Disable Extended Display Mode */
|
||||
vga_sr_mask(0x15, 0x00, 0x02);
|
||||
|
||||
/* Disable Wrap-around */
|
||||
vga_sr_mask(0x15, 0x00, 0x20);
|
||||
|
||||
/* Disable Extended Mode memory access */
|
||||
vga_sr_mask(0x1A, 0x00, 0x08);
|
||||
|
||||
/* Make sure that we only touch CRTC1s DAC */
|
||||
vga_sr_mask(0x1A, 0x00, 0x01);
|
||||
|
||||
/* Set up power to the clocks/crtcs */
|
||||
vga_sr_mask(0x19, 0x7F, 0x7F); /* enable clock gating for all. */
|
||||
vga_sr_mask(0x1B, 0xC0, 0xC0); /* secondary clock according to pm */
|
||||
vga_sr_mask(0x1B, 0x20, 0x30); /* primary clock is always on */
|
||||
|
||||
/* set everything according to PM/Engine idle state except pci dma */
|
||||
vga_sr_write(0x2D, 0xFF); /* Power management control 1 */
|
||||
vga_sr_write(0x2E, 0xFB); /* Power management control 2 */
|
||||
vga_sr_write(0x3F, 0xFF); /* Power management control 3 */
|
||||
|
||||
/* now set up the engine clock. */
|
||||
vga_sr_write(0x47, 0xB8);
|
||||
vga_sr_write(0x48, 0x08);
|
||||
vga_sr_write(0x49, 0x03);
|
||||
|
||||
/* trigger engine clock setting */
|
||||
vga_sr_mask(0x40, 0x01, 0x01);
|
||||
vga_sr_mask(0x40, 0, 0x01);
|
||||
|
||||
vga_cr_mask(0x30, 0x04, 0x04); /* Enable PowerNow in primary path */
|
||||
vga_cr_mask(0x36, 0x01, 0x01); /* Enable PCI Power Management */
|
||||
|
||||
/* Power now indicators... */
|
||||
vga_cr_write(0x41, 0xB9);
|
||||
vga_cr_write(0x42, 0xB4);
|
||||
/* could these be the CRTC2 power now indicators? */
|
||||
vga_cr_write(0x9D, 0x80); /* Power Now Ending position enable */
|
||||
vga_cr_write(0x9E, 0xB4); /* Power Now Control 3 */
|
||||
|
||||
/* primary fifo setting */
|
||||
vga_sr_mask(0x16, 0x28, 0xBF); /* pthreshold: 160 */
|
||||
vga_sr_write(0x17, 0x60); /* max depth: 194 */
|
||||
vga_sr_mask(0x18, 0x0E, 0xBF); /* high priority threshold: 56 */
|
||||
vga_sr_write(0x1C, 0x54); /* Fetch count */
|
||||
|
||||
vga_sr_write(0x20, 0x40); /* display queue typical arbiter control 0 */
|
||||
vga_sr_write(0x21, 0x40); /* display queue typical arbiter control 1 */
|
||||
vga_sr_mask(0x22, 0x14, 0x1F); /* display queue expire number */
|
||||
|
||||
/* Typical Arbiter Control */
|
||||
vga_sr_mask(0x41, 0x40, 0xF0); /* Request threshold */
|
||||
vga_sr_mask(0x42, 0x20, 0x20); /* Support Fetch Cycle with Length 2 */
|
||||
|
||||
vga_sr_write(0x50, 0x1F); /* AGP Control Register */
|
||||
vga_sr_write(0x51, 0xF5); /* AGP FIFO Control 1 */
|
||||
|
||||
vga_cr_mask(0x33, 0x08, 0x08); /* Enable Prefetch Mode */
|
||||
}
|
||||
|
||||
#endif /* CONFIG_VGA */
|
||||
|
||||
/*
|
||||
*
|
||||
*/
|
||||
static void
|
||||
chrome_init(struct device *dev)
|
||||
{
|
||||
uint32_t fb_size, fb_address;
|
||||
|
||||
fb_size = k8m890_host_fb_size_get();
|
||||
if (!fb_size) {
|
||||
printk_warning("Chrome: Device has not been initialised in the"
|
||||
" ramcontroller!\n");
|
||||
return;
|
||||
}
|
||||
|
||||
fb_address = pci_read_config32(dev, 0x10);
|
||||
fb_address &= ~0x0F;
|
||||
if (!fb_address) {
|
||||
printk_warning("Chrome: No FB BAR assigned!\n");
|
||||
return;
|
||||
}
|
||||
|
||||
printk_info("Chrome: Using %dMB Framebuffer at 0x%08X.\n",
|
||||
fb_size, fb_address);
|
||||
|
||||
//k8m890_host_fb_direct_set(fb_address);
|
||||
|
||||
#if CONFIG_VGA == 1
|
||||
/* Now set up the VGA console */
|
||||
vga_io_init(); /* Enable full IO access */
|
||||
|
||||
chrome_vga_init(dev);
|
||||
|
||||
vga_textmode_init();
|
||||
|
||||
#if CONFIG_CONSOLE_VGA == 1
|
||||
vga_console_init();
|
||||
#endif
|
||||
|
||||
printk_info("Chrome VGA Textmode initialized.\n");
|
||||
|
||||
#if CONFIG_CONSOLE_VGA == 0
|
||||
/* if we don't have console, at least print something... */
|
||||
vga_line_write(0, "Chrome VGA Textmode initialized.");
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_VGA */
|
||||
}
|
||||
|
||||
static struct device_operations
|
||||
chrome_ops = {
|
||||
.read_resources = pci_dev_read_resources,
|
||||
.set_resources = pci_dev_set_resources,
|
||||
.enable_resources = pci_dev_enable_resources,
|
||||
.init = chrome_init,
|
||||
.scan_bus = 0,
|
||||
.enable = 0,
|
||||
};
|
||||
|
||||
static const struct pci_driver unichrome_driver __pci_driver = {
|
||||
.ops = &chrome_ops,
|
||||
.vendor = 0x1106,
|
||||
.device = 0x3230,
|
||||
};
|
||||
|
|
@ -43,4 +43,7 @@
|
|||
extern void writeback(struct device *dev, u16 where, u8 what);
|
||||
extern void dump_south(device_t dev);
|
||||
|
||||
int k8m890_host_fb_size_get(void);
|
||||
//void k8m890_host_fb_direct_set(uint32_t fb_address);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@
|
|||
#include <console/console.h>
|
||||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <pc80/mc146818rtc.h>
|
||||
#include <bitops.h>
|
||||
#include "k8t890.h"
|
||||
|
||||
|
|
@ -104,6 +105,23 @@ extern uint64_t high_tables_base, high_tables_size;
|
|||
#endif
|
||||
}
|
||||
|
||||
/*
|
||||
*
|
||||
*/
|
||||
int
|
||||
k8m890_host_fb_size_get(void)
|
||||
{
|
||||
struct device *dev = dev_find_device(PCI_VENDOR_ID_VIA,
|
||||
PCI_DEVICE_ID_VIA_K8M890CE_3, 0);
|
||||
unsigned char tmp;
|
||||
|
||||
tmp = pci_read_config8(dev, 0xA1);
|
||||
tmp >>= 4;
|
||||
if (tmp & 0x08)
|
||||
return 4 << (tmp & 7);
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void dram_init_fb(struct device *dev)
|
||||
{
|
||||
|
|
@ -115,7 +133,24 @@ static void dram_init_fb(struct device *dev)
|
|||
*/
|
||||
u8 tmp;
|
||||
uint64_t proposed_base;
|
||||
unsigned int fbsize = (K8M890_FBSIZEMB * 1024 * 1024);
|
||||
unsigned int fbbits = 0;
|
||||
unsigned int fbsize;
|
||||
int ret;
|
||||
|
||||
|
||||
ret = get_option(&fbbits, "videoram_size");
|
||||
if (ret) {
|
||||
printk_warning("Failed to get videoram size (error %d), using default.\n", ret);
|
||||
fbbits = 5;
|
||||
}
|
||||
|
||||
if ((fbbits < 1) || (fbbits > 7)) {
|
||||
printk_warning("Invalid videoram size (%d), using default.\n",
|
||||
4 << fbbits);
|
||||
fbbits = 5;
|
||||
}
|
||||
|
||||
fbsize = 4 << (fbbits + 20);
|
||||
|
||||
resmax = NULL;
|
||||
search_global_resources(
|
||||
|
|
@ -131,13 +166,13 @@ static void dram_init_fb(struct device *dev)
|
|||
proposed_base = resmax->base + resmax->size - fbsize;
|
||||
resmax->size -= fbsize;
|
||||
|
||||
printk_debug("VIA FB proposed base: %llx\n", proposed_base);
|
||||
printk_info("K8M890: Using a %dMB framebuffer.\n", 4 << fbbits);
|
||||
|
||||
/* Step 1: enable UMA but no FB */
|
||||
pci_write_config8(dev, 0xa1, 0x80);
|
||||
|
||||
/* Step 2: enough is just the FB size, the CPU accessible address is not needed */
|
||||
tmp = ((log2(K8M890_FBSIZEMB) - 2) << 4) | 0x80;
|
||||
tmp = (fbbits << 4) | 0x80;
|
||||
pci_write_config8(dev, 0xa1, tmp);
|
||||
|
||||
/* TODO K8 needs some UMA fine tuning too maybe call some generic routine here? */
|
||||
|
|
|
|||
Loading…
Reference in New Issue