mb/google/brya/var/mithrax: update overridetree and Kconfig
1. Update override devicetree based on schematics. 2. Update Kconfig based on schematics. BUG=b:229191897 TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ia28ae16f609fda6d90558e69b2d41139dbe533fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/64329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
This commit is contained in:
John Su
Tim Wawrzynczak
parent
31021b3720
commit
af092ac6ec
|
|
@ -122,6 +122,7 @@ config DRIVER_TPM_I2C_BUS
|
|||
default 0x1 if BOARD_GOOGLE_CROTA
|
||||
default 0x1 if BOARD_GOOGLE_MOLI
|
||||
default 0x1 if BOARD_GOOGLE_OSIRIS
|
||||
default 0x1 if BOARD_GOOGLE_MITHRAX
|
||||
|
||||
config DRIVER_TPM_I2C_ADDR
|
||||
hex
|
||||
|
|
|
|||
|
|
@ -216,3 +216,5 @@ config BOARD_GOOGLE_OSIRIS
|
|||
config BOARD_GOOGLE_MITHRAX
|
||||
bool "-> Mithrax"
|
||||
select BOARD_GOOGLE_BASEBOARD_BRYA
|
||||
select DRIVERS_GENERIC_GPIO_KEYS
|
||||
select DRIVERS_GENESYSLOGIC_GL9755
|
||||
|
|
|
|||
|
|
@ -1,6 +1,360 @@
|
|||
chip soc/intel/alderlake
|
||||
|
||||
device domain 0 on
|
||||
end
|
||||
|
||||
fw_config
|
||||
field DB_USB 0 2
|
||||
option USB_ABSENT 0
|
||||
option USB3_PS8815 1
|
||||
end
|
||||
field STYLUS 5
|
||||
option STYLUS_ABSENT 0
|
||||
option STYLUS_PRESENT 1
|
||||
end
|
||||
field AUDIO_AMP 7 9
|
||||
option UNPROVISIONED 0
|
||||
option MAX98360_ALC5682VS_I2S_2WAY 1
|
||||
end
|
||||
end
|
||||
|
||||
chip soc/intel/alderlake
|
||||
register "sagv" = "SaGv_Enabled"
|
||||
|
||||
# FIVR configurations for brya are disabled since the board doesn't have V1p05 and Vnn
|
||||
# bypass rails implemented.
|
||||
register "ext_fivr_settings" = "{
|
||||
.configure_ext_fivr = 1,
|
||||
}"
|
||||
|
||||
register "usb2_ports[0]" = "USB2_PORT_EMPTY"
|
||||
register "usb2_ports[3]" = "USB2_PORT_EMPTY"
|
||||
register "usb3_ports[3]" = "USB3_PORT_EMPTY"
|
||||
|
||||
register "tcss_ports[0]" = "TCSS_PORT_EMPTY"
|
||||
|
||||
register "serial_io_i2c_mode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoPci,
|
||||
}"
|
||||
|
||||
register "serial_io_gspi_mode" = "{
|
||||
[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
|
||||
}"
|
||||
|
||||
# As per Intel Advisory doc#723158, the change is required to prevent possible
|
||||
# display flickering issue.
|
||||
register "usb2_phy_sus_pg_disable" = "1"
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | Audio |
|
||||
#| I2C1 | cr50 TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| I2C3 | Touchscreen |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 550,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.early_init = 1,
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 550,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
.i2c[3] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 550,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 550,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device ref dtt on
|
||||
chip drivers/intel/dptf
|
||||
## sensor information
|
||||
register "options.tsr[0].desc" = ""DRAM_SOC""
|
||||
register "options.tsr[1].desc" = ""Ambient""
|
||||
register "options.tsr[2].desc" = ""Charger""
|
||||
|
||||
## Active Policy
|
||||
register "policies.active" = "{
|
||||
[0] = {
|
||||
.target = DPTF_TEMP_SENSOR_1,
|
||||
.thresholds = {
|
||||
TEMP_PCT(48, 76),
|
||||
TEMP_PCT(45, 65),
|
||||
TEMP_PCT(42, 53),
|
||||
TEMP_PCT(39, 45),
|
||||
TEMP_PCT(36, 39),
|
||||
TEMP_PCT(33, 34),
|
||||
}
|
||||
}
|
||||
}"
|
||||
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 90, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 70, 5000),
|
||||
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 60, 5000),
|
||||
[3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 70, 5000),
|
||||
}"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(TEMP_SENSOR_0, 80, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_1, 70, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN),
|
||||
}"
|
||||
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 13000,
|
||||
.max_power = 15000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 28 * MSECS_PER_SEC,
|
||||
.granularity = 200,
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 55000,
|
||||
.max_power = 55000,
|
||||
.time_window_min = 32 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 1000,
|
||||
}
|
||||
}"
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 1700 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
|
||||
## Fan Performance Control (Percent, Speed, Noise, Power)
|
||||
register "controls.fan_perf" = "{
|
||||
[0] = { 90, 6700, 220, 2200, },
|
||||
[1] = { 80, 5800, 180, 1800, },
|
||||
[2] = { 70, 5000, 145, 1450, },
|
||||
[3] = { 60, 4900, 115, 1150, },
|
||||
[4] = { 50, 3838, 90, 900, },
|
||||
[5] = { 40, 2904, 55, 550, },
|
||||
[6] = { 30, 2337, 30, 300, },
|
||||
[7] = { 20, 1608, 15, 150, },
|
||||
[8] = { 10, 800, 10, 100, },
|
||||
[9] = { 0, 0, 0, 50, }
|
||||
}"
|
||||
|
||||
## Fan options
|
||||
register "options.fan.fine_grained_control" = "1"
|
||||
register "options.fan.step_size" = "2"
|
||||
|
||||
device generic 0 alias dptf_policy on end
|
||||
end
|
||||
end
|
||||
device ref tbt_pcie_rp0 off end
|
||||
device ref tbt_pcie_rp1 off end
|
||||
device ref tbt_pcie_rp2 off end
|
||||
device ref cnvi_wifi on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_PME_B0"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref tcss_dma0 off end
|
||||
device ref tcss_dma1 off end
|
||||
device ref pcie_rp6 off end
|
||||
device ref pcie_rp8 on
|
||||
chip soc/intel/common/block/pcie/rtd3
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
|
||||
register "srcclk_pin" = "3"
|
||||
device generic 0 on end
|
||||
end
|
||||
end #PCIE8 SD card
|
||||
device ref i2c0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RTL5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on
|
||||
probe AUDIO_AMP MAX98360_ALC5682VS_I2S_2WAY
|
||||
end
|
||||
end
|
||||
end #I2C0
|
||||
device ref i2c1 on
|
||||
chip drivers/i2c/tpm
|
||||
register "hid" = ""GOOG0005""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
|
||||
device i2c 50 on end
|
||||
end
|
||||
end #I2C1
|
||||
device ref i2c3 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN9008""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||
register "generic.reset_delay_ms" = "300"
|
||||
register "generic.reset_off_delay_ms" = "1"
|
||||
register "generic.enable_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||
register "generic.enable_delay_ms" = "6"
|
||||
register "generic.stop_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||
register "generic.stop_off_delay_ms" = "1"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "generic.disable_gpio_export_in_crs" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 10 on end
|
||||
end
|
||||
chip drivers/generic/gpio_keys
|
||||
register "name" = ""PENH""
|
||||
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_A7)"
|
||||
register "key.wake_gpe" = "GPE0_DW0_08"
|
||||
register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
|
||||
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
|
||||
register "key.dev_name" = ""EJCT""
|
||||
register "key.linux_code" = "SW_PEN_INSERTED"
|
||||
register "key.linux_input_type" = "EV_SW"
|
||||
register "key.label" = ""pen_eject""
|
||||
device generic 0 on
|
||||
probe STYLUS STYLUS_PRESENT
|
||||
end
|
||||
end
|
||||
end #I2C3
|
||||
device ref i2c5 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "wake" = "GPE0_DW2_14"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
end #I2C5
|
||||
device ref hda on
|
||||
chip drivers/generic/max98357a
|
||||
register "hid" = ""MX98360A""
|
||||
register "sdmode_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
|
||||
register "sdmode_delay" = "5"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn1 as mux_conn[1]
|
||||
use conn2 as mux_conn[0]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port2 as usb2_port
|
||||
use tcss_usb3_port2 as usb3_port
|
||||
device generic 1 alias conn1 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port3 as usb2_port
|
||||
use tcss_usb3_port3 as usb3_port
|
||||
device generic 2 alias conn2 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref tcss_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref tcss_usb3_port2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C2 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref tcss_usb3_port3 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref usb2_port2 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C2 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref usb2_port3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0 (DB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||
device ref usb2_port9 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port10 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0 (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
|
|||
|
|
@ -0,0 +1,14 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <chip.h>
|
||||
#include <fw_config.h>
|
||||
#include <baseboard/variants.h>
|
||||
|
||||
void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config)
|
||||
{
|
||||
if (fw_config_probe(FW_CONFIG(DB_USB, USB3_PS8815))) {
|
||||
config->typec_aux_bias_pads[2].pad_auxp_dc = GPP_A19;
|
||||
config->typec_aux_bias_pads[2].pad_auxn_dc = GPP_A20;
|
||||
config->tcss_aux_ori = 0x10;
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue