lynxpoint: split clearing and enabling of smm

Previously southbridge_smm_init() was provided that did both
the clearing of the SMM state and enabling SMIs. This is
troublesome in how haswell machines bring up the APs. The BSP
enters SMM once to determine if parallel SMM relocation is possible.
If it is possible the BSP releases the APs to do SMM relocation.
Normally, after the APs complete the SMM relocation, the BSP would then
re-enter the relocation handler to relocate its own SMM space.
However, because SMIs were previously enabled it is possible for an SMI
event to occur before the APs are complete or have entered the
relocation handler. This is bad because the BSP will turn off parallel
SMM save state. Additionally, this is a problem because the relocation
handler is not written to handle regular SMIs which can cause an
SMI storm which effectively looks like a hung machine. Correct these
issues by turning on SMIs after all the SMM relocation has occurred.

Change-Id: Id4f07553b110b9664d51d2e670a14e6617591500
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/2977
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

src/cpu/intel/haswell/smmrelocate.c

@@ -396,7 +396,8 @@ int smm_initialize(void)
 	if (cpu_smm_setup())
 		return -1;
 
-	southbridge_smm_init();
+	/* Clear the SMM state in the southbridge. */
+	southbridge_smm_clear_state();
 
 	/* Run the relocation handler. */
 	smm_initiate_relocation();
@@ -412,6 +413,10 @@ int smm_initialize(void)
 		release_aps_for_smm_relocation(0);
 	}
 
+	/* Now that all APs have been relocated as well as the BSP let SMIs
+	 * start flowing. */
+	southbridge_smm_enable_smi();
+
 	/* Lock down the SMRAM space. */
 	smm_lock();
 

src/southbridge/intel/lynxpoint/pch.h

@@ -170,9 +170,13 @@ void pch_log_state(void);
 void acpi_create_intel_hpet(acpi_hpet_t * hpet);
 
 /* These helpers are for performing SMM relocation. */
-void southbridge_smm_init(void);
 void southbridge_trigger_smi(void);
 void southbridge_clear_smi_status(void);
+/* The initialization of the southbridge is split into 2 compoments. One is
+ * for clearing the state in the SMM registers. The other is for enabling
+ * SMIs. They are split so that other work between the 2 actions. */
+void southbridge_smm_clear_state(void);
+void southbridge_smm_enable_smi(void);
 #else
 void enable_smbus(void);
 void enable_usb_bar(void);

src/southbridge/intel/lynxpoint/smi.c

@@ -30,7 +30,7 @@
 #include <string.h>
 #include "pch.h"
 
-void southbridge_smm_init(void)
+void southbridge_smm_clear_state(void)
 {
 	u32 smi_en;
 
@@ -54,7 +54,11 @@ void southbridge_smm_init(void)
 	clear_pm1_status();
 	clear_tco_status();
 	clear_gpe_status();
+}
 
+void southbridge_smm_enable_smi(void)
+{
+	printk(BIOS_DEBUG, "Enabling SMIs.\n");
 	/* Configure events */
 	enable_pm1(PWRBTN_EN | GBL_EN);
 	disable_gpe(PME_B0_EN);