Hook up all AMD SB600/SB700 boards to the EHCI Debug Port infrastructure.

Without a (currently) dummy set_debug_port() function the build fails,
this may or may not be fixed differently in the future.

Manually build-tested on all SB600/SB700 boards, and tested on hardware on
one SB600 board I own, works fine.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5833 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/amd/dbm690t/romstage.c

@@ -52,6 +52,11 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "superio/ite/it8712f/it8712f_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb600/sb600_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -123,6 +128,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	/* it8712f_enable_serial does not use its 1st parameter. */
 	it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb600_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	/* Halt if there was a built in self test failure */

src/mainboard/amd/mahogany/romstage.c

@@ -52,6 +52,11 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "superio/ite/it8718f/it8718f_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -122,6 +127,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	/* Halt if there was a built in self test failure */

src/mainboard/amd/mahogany_fam10/romstage.c

@@ -60,6 +60,12 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/ite/it8718f/it8718f_early_serial.c"
+
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -138,6 +144,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/amd/pistachio/romstage.c

@@ -46,6 +46,11 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "superio/ite/it8712f/it8712f_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb600/sb600_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -117,8 +122,14 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	sb600_lpc_init();
 
 	/* Pistachio used a FPGA to enable serial debug instead of a SIO
-	 * and it doens't require any special setup. */
+	 * and it doesn't require any special setup. */
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb600_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	post_code(0x03);

src/mainboard/amd/tilapia_fam10/romstage.c

@@ -60,6 +60,12 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/ite/it8718f/it8718f_early_serial.c"
+
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -138,6 +144,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/asrock/939a785gmh/romstage.c

@@ -53,6 +53,11 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "superio/winbond/w83627dhg/w83627dhg_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -176,6 +181,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	sio_init();
 	w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	/* Halt if there was a built in self test failure */

src/mainboard/asus/m4a785-m/romstage.c

@@ -60,6 +60,12 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/ite/it8712f/it8712f_early_serial.c"
+
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -139,6 +145,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
 	it8712f_kill_watchdog(); /* disable watchdog, so it does not reset while still booting */
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/gigabyte/ma785gmt/romstage.c

@@ -56,6 +56,12 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/ite/it8718f/it8718f_early_serial.c"
+
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -134,6 +140,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
 	it8718f_disable_reboot();
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/gigabyte/ma78gm/romstage.c

@@ -60,6 +60,12 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/ite/it8718f/it8718f_early_serial.c"
+
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -138,6 +144,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
 	it8718f_disable_reboot();
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/iei/kino-780am2-fam10/romstage.c

@@ -63,6 +63,12 @@
 static int smbus_read_byte(u32 device, u32 address);
 
 #include "superio/fintek/f71859/f71859_early_serial.c"
+
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -141,6 +147,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	f71859_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/jetway/pa78vm5/romstage.c

@@ -67,6 +67,11 @@ static int smbus_read_byte(u32 device, u32 address);
 #define SERIAL_DEV PNP_DEV(0x2e, F71863FG_SP1)
 #endif
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb700/sb700_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include <cpu/amd/mtrr.h>
 #include "northbridge/amd/amdfam10/setup_resource_map.c"
@@ -146,6 +151,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 
 	f71863fg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb700_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 	printk(BIOS_DEBUG, "\n");
 

src/mainboard/kontron/kt690/romstage.c

@@ -54,6 +54,11 @@
 #include "northbridge/amd/amdk8/debug.c"
 #include "superio/winbond/w83627dhg/w83627dhg_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb600/sb600_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -125,6 +130,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	dev=PNP_DEV(0x2e, W83627DHG_SP1);
 	w83627dhg_enable_serial(dev, CONFIG_TTYS0_BASE);
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb600_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	/* Halt if there was a built in self test failure */

src/mainboard/technexion/tim5690/romstage.c

@@ -53,6 +53,11 @@
 #include "northbridge/amd/amdk8/debug.c"
 #include "superio/ite/it8712f/it8712f_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb600/sb600_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -130,6 +135,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
 	it8712f_kill_watchdog();
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb600_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	/* Halt if there was a built in self test failure */

src/mainboard/technexion/tim8690/romstage.c

@@ -53,6 +53,11 @@
 #include "northbridge/amd/amdk8/debug.c"
 #include "superio/ite/it8712f/it8712f_early_serial.c"
 
+#if CONFIG_USBDEBUG
+#include "southbridge/amd/sb600/sb600_enable_usbdebug.c"
+#include "pc80/usbdebug_serial.c"
+#endif
+
 #include "cpu/x86/mtrr/earlymtrr.c"
 #include "cpu/x86/bist.h"
 
@@ -124,6 +129,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
 	it8712f_kill_watchdog();
 	uart_init();
+
+#if CONFIG_USBDEBUG
+	sb600_enable_usbdebug(0);
+	early_usbdebug_init();
+#endif
+
 	console_init();
 
 	/* Halt if there was a built in self test failure */

src/southbridge/amd/sb600/sb600_enable_usbdebug.c

@@ -17,6 +17,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
+#include <usbdebug.h>
+
 #ifndef SB600_DEVN_BASE
 
 #define SB600_DEVN_BASE 0
@@ -27,6 +29,11 @@
 #define EHCI_BAR 0xFEF00000
 #define EHCI_DEBUG_OFFSET 0xE0
 
+/* Required for successful build, but currently empty. */
+void set_debug_port(unsigned int port)
+{
+}
+
 static void sb600_enable_usbdebug(u32 port)
 {
 	set_debug_port(port);

src/southbridge/amd/sb700/sb700_enable_usbdebug.c

@@ -17,6 +17,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
+#include <usbdebug.h>
+
 #ifndef SB700_DEVN_BASE
 
 #define SB700_DEVN_BASE 0
@@ -27,6 +29,11 @@
 #define EHCI_BAR 0xFEF00000
 #define EHCI_DEBUG_OFFSET 0xE0
 
+/* Required for successful build, but currently empty. */
+void set_debug_port(unsigned int port)
+{
+}
+
 static void sb700_enable_usbdebug(u32 port)
 {
 	set_debug_port(port);