src: Get rid of unneeded whitespace

Change-Id: I630d49ab504d9f6e052806b516a600fa41b9a8da
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

src/mainboard/lenovo/z61t/devicetree.cb

@@ -139,7 +139,6 @@ chip northbridge/intel/i945
 						io 0x66 = 0x1604
 					end
 
-
 					register "config0" = "0xa6"
 					register "config1" = "0x05"
 					register "config2" = "0xa0"
@@ -232,7 +231,6 @@ chip northbridge/intel/i945
 					device i2c 5e on end
 					device i2c 5f on end
 				end
-
 			end
 		end
 	end

src/mainboard/pcengines/alix1c/devicetree.cb

@@ -81,5 +81,4 @@ chip northbridge/amd/lx
 			device lapic 0 on end
 		end
 	end
-
 end

src/mainboard/pcengines/alix2d/devicetree.cb

@@ -41,5 +41,4 @@ chip northbridge/amd/lx
 			device lapic 0 on end
 		end
 	end
-
 end

src/northbridge/amd/amdmct/mct/mct_d.c

@@ -3752,8 +3752,9 @@ void mct_SetDramConfigHi_D(struct DCTStatStruc *pDCTstat, u32 dct,
 	 * Solution: From the bug report:
 	 *  1. A software-initiated frequency change should be wrapped into the
 	 *     following sequence :
-	 * 	- a) Disable Compensation (F2[1, 0]9C_x08[30])
+	 *	a) Disable Compensation (F2[1, 0]9C_x08[30])
-	 * 	b) Reset the Begin Compensation bit (D3CMP->COMP_CONFIG[0]) in all the compensation engines
+	 *	b) Reset the Begin Compensation bit (D3CMP->COMP_CONFIG[0]) in
+	 *	   all the compensation engines
 	 *	c) Do frequency change
 	 *	d) Enable Compensation (F2[1, 0]9C_x08[30])
 	 *  2. A software-initiated Disable Compensation should always be

src/northbridge/amd/amdmct/mct_ddr3/mct_d.c

@@ -7908,8 +7908,9 @@ void mct_SetDramConfigHi_D(struct MCTStatStruc *pMCTstat,
 	 * Solution: From the bug report:
 	 *  1. A software-initiated frequency change should be wrapped into the
 	 *     following sequence :
-	 * 	- a) Disable Compensation (F2[1, 0]9C_x08[30])
+	 *	a) Disable Compensation (F2[1, 0]9C_x08[30])
-	 * 	b) Reset the Begin Compensation bit (D3CMP->COMP_CONFIG[0]) in all the compensation engines
+	 *	b) Reset the Begin Compensation bit (D3CMP->COMP_CONFIG[0]) in
+	 *	   all the compensation engines
 	 *	c) Do frequency change
 	 *	d) Enable Compensation (F2[1, 0]9C_x08[30])
 	 *  2. A software-initiated Disable Compensation should always be

src/southbridge/amd/cimx/sb900/late.c

@@ -387,7 +387,7 @@ static void sb900_enable(struct device *dev)
 
 	case (0x14 << 3) | 2: /* 0:14:2 HDA */
 		if (dev->enabled) {
-  			if (AZALIA_DISABLE == sb_config->AzaliaController) {
+			if (sb_config->AzaliaController == AZALIA_DISABLE) {
 				sb_config->AzaliaController = AZALIA_AUTO;
 			}
 			printk(BIOS_DEBUG, "hda enabled\n");

util/vgabios/device.c

@@ -80,7 +80,8 @@ biosemu_dev_get_addr_info(void)
 	taa_index++;
 	/* legacy ranges if its a VGA card... */
 	if ((bios_device.dev->class & 0xFF0000) == 0x030000) {
-		DEBUG_PRINTF("%s: VGA device found, adding legacy resources... \n", __func__);
+		DEBUG_PRINTF("%s: VGA device found, adding legacy resources..."
+			     "\n", __func__);
 		/* I/O 0x3B0-0x3BB */
 		translate_address_array[taa_index].info = IORESOURCE_FIXED | IORESOURCE_IO;
 		translate_address_array[taa_index].bus = bus;

util/vgabios/testbios.c

@@ -116,8 +116,8 @@ int printk(int msg_level, const char *fmt, ...)
 static void usage(char *name)
 {
 	printf
-	    ("Usage: %s [-c codesegment] [-s size] [-b base] [-i ip] [-t] <filename> ... \n",
+	    ("Usage: %s [-c codesegment] [-s size] [-b base] [-i ip] [-t] "
-	     name);
+	     "<filename> ...\n", name);
 }
 
 /* main entry into YABEL biosemu, arguments are: