soc,mb/intel: clean up remaining FSP2.0 socs/boards

Remove CONFIG_...FSP2.0 based if-switches from FSP2.0-only socs/boards

Change-Id: Iae92dc2e2328b14c78ac686aaf326bd68430933b
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36279
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/intel/galileo/Kconfig

@@ -23,7 +23,6 @@ config BOARD_SPECIFIC_OPTIONS
 	select SOC_INTEL_QUARK
 	select MAINBOARD_HAS_I2C_TPM_ATMEL
 	select MAINBOARD_HAS_TPM2
-	select PLATFORM_USES_FSP2_0
 	select UDK_2015_BINDING
 
 
@@ -103,7 +102,6 @@ config FSP_DEBUG_ALL
 	  Turn on debug support to display HOBS, MTRRS, SMM_MEMORY_MAP, UPD_DATA
 	  also turn on FSP 2.0 debug support for ESRAM_LAYOUT,
 	  FSP_CALLS_AND_STATUS, FSP_HEADER, POSTCAR_CONSOLE and VERIFY_HOBS
-	  or FSP 1.1 DISPLAY_FSP_ENTRY_POINTS
 
 config VBOOT_WITH_CRYPTO_SHIELD
 	bool "Verified boot using the Crypto Shield board"

src/mainboard/intel/leafhill/Kconfig

@@ -53,7 +53,6 @@ config HAVE_IFD_BIN
 
 config ADD_FSP_BINARIES
 	bool "Add FSP blobs"
-	depends on PLATFORM_USES_FSP2_0
 	default n
 
 config FSP_M_FILE

src/mainboard/intel/minnow3/Kconfig

@@ -49,7 +49,6 @@ config HAVE_IFD_BIN
 
 config ADD_FSP_BINARIES
 	bool "Add FSP blobs"
-	depends on PLATFORM_USES_FSP2_0
 	default n
 
 config FSP_M_FILE

src/soc/intel/apollolake/Makefile.inc

@@ -22,7 +22,7 @@ bootblock-y += uart.c
 
 romstage-y += car.c
 romstage-y += ../../../cpu/intel/car/romstage.c
-romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c
+romstage-y += romstage.c
 romstage-y += gspi.c
 romstage-y += heci.c
 romstage-y += i2c.c

src/soc/intel/cannonlake/Makefile.inc

@@ -49,7 +49,7 @@ ramstage-y += nhlt.c
 ramstage-y += p2sb.c
 ramstage-y += pmc.c
 ramstage-y += pmutil.c
-ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
+ramstage-y += reset.c
 ramstage-y += smmrelocate.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c

src/soc/intel/icelake/Makefile.inc

@@ -48,7 +48,7 @@ ramstage-y += memmap.c
 ramstage-y += p2sb.c
 ramstage-y += pmc.c
 ramstage-y += pmutil.c
-ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
+ramstage-y += reset.c
 ramstage-y += smmrelocate.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c

src/soc/intel/quark/Kconfig

@@ -29,6 +29,7 @@ config CPU_SPECIFIC_OPTIONS
 	select C_ENVIRONMENT_BOOTBLOCK
 	select NO_MMCONF_SUPPORT
 	select REG_SCRIPT
+	select PLATFORM_USES_FSP2_0
 	select SOC_INTEL_COMMON
 	select SOC_INTEL_COMMON_RESET
 	select SOC_SETS_MSRS
@@ -113,8 +114,7 @@ config ENABLE_DEBUG_LED_BOOTBLOCK_ENTRY
 	select ENABLE_DEBUG_LED
 	help
 	  Indicate that bootblock_c_entry was entered.  If the SD LED does not
-	  light then debug the code between ESRAM and bootblock_c_entry.  For
-	  FSP 1.1, use ENABLE_DEBUG_LED_FINDFSP to split this code.
+	  light then debug the code between ESRAM and bootblock_c_entry.
 
 config ENABLE_DEBUG_LED_SOC_EARLY_INIT_ENTRY
 	bool "SD LED indicates bootblock_soc_early_init successfully entered"
@@ -192,12 +192,10 @@ config FSP_ESRAM_LOC
 
 config FSP_M_FILE
 	string
-	depends on PLATFORM_USES_FSP2_0
 	default "3rdparty/blobs/soc/intel/quark/$(CONFIG_FSP_TYPE)/$(CONFIG_FSP_BUILD_TYPE)/FSP_M.fd"
 
 config FSP_S_FILE
 	string
-	depends on PLATFORM_USES_FSP2_0
 	default "3rdparty/blobs/soc/intel/quark/$(CONFIG_FSP_TYPE)/$(CONFIG_FSP_BUILD_TYPE)/FSP_S.fd"
 
 #####

src/soc/intel/quark/Makefile.inc

@@ -37,9 +37,9 @@ romstage-y += reg_access.c
 romstage-$(CONFIG_STORAGE_TEST) += storage_test.c
 romstage-y += tsc_freq.c
 romstage-$(CONFIG_ENABLE_BUILTIN_HSUART1) += uart_common.c
-romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
+romstage-y += reset.c
 
-postcar-y += fsp2_0.c
+postcar-y += fsp_params.c
 postcar-y += i2c.c
 postcar-y += memmap.c
 postcar-y += reg_access.c
@@ -49,14 +49,14 @@ postcar-$(CONFIG_ENABLE_BUILTIN_HSUART1) += uart_common.c
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
 ramstage-y += chip.c
 ramstage-y += ehci.c
-ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += fsp2_0.c
+ramstage-y += fsp_params.c
 ramstage-y += gpio_i2c.c
 ramstage-y += i2c.c
 ramstage-y += lpc.c
 ramstage-y += memmap.c
 ramstage-y += northcluster.c
 ramstage-y += reg_access.c
-ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
+ramstage-y += reset.c
 ramstage-y += sd.c
 ramstage-y += spi.c
 ramstage-y += spi_debug.c

src/soc/intel/quark/romstage/Makefile.inc

@@ -14,10 +14,8 @@
 #
 
 romstage-y += car.c
-ifeq ($(CONFIG_PLATFORM_USES_FSP2_0),y)
 romstage-$(CONFIG_DISPLAY_UPD_DATA) += debug.c
-romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += fsp2_0.c
-endif # CONFIG_PLATFORM_USES_FSP2_0
+romstage-y += fsp_params.c
 romstage-y += mtrr.c
 romstage-y += pcie.c
 romstage-y += report_platform.c